Opened 15 years ago
Closed 12 years ago
#405 closed defect (fixed)
ACPI, Gigabyte GA-K8NS Ultra-939
Reported by: | David McKenna | Owned by: | David Azarewicz |
---|---|---|---|
Priority: | major | Milestone: | Release version 3.19 |
Component: | ACPI PSD | Version: | 3.17 |
Keywords: | Cc: |
Description
I am running eCS 2.0 RC6a with ACPI 3.15 and use the kernel supplied with ACPI 3.15. I have installed Fixpak 5. Hardware is a Gigabyte GA-K8NS Ultra-939 motherboard (nForce3 Ultra chipset), 3GB RAM, Radeon 9600 Video 256MB, one 150GB SATA drive (one partition - no Boot Manager) with Danis 1.8.5, one SATA DVD-RW. I use UniAud? 1.9.12 to drive the on-board ALC850 sound, and GenMac? to drive the on-board Marvell 8001 gigabit LAN (see attached logs).
Using ACPI.PSD /SMP /APIC /TMR, system does not boot ~1 out of 3 tries. It will hang when the video tries to switch screen resolution for the desktop. The monitor loses sync and the 'no signal' message appears on screen. I need to hard reset the computer. I have not found any better switches for ACPI.PSD.
When it boots successfully it seems to work well (that is when I got the logs..:-).
ACPI 3.14 would not boot at all - it would Trap 0008 when trying to load UniAud? (not heavily tested). I have not tried any earlier versions on this hardware.
Attachments (60)
Change History (166)
Changed 15 years ago by
Attachment: | acpi-log-gigabyte GA-K8NS Ultra-939.ziq added |
---|
comment:2 Changed 15 years ago by
When is running AcpiDaemon?.exe? From config.sys or from startup.cmd?
comment:3 Changed 15 years ago by
Owner: | changed from eco to pasha |
---|
comment:4 Changed 15 years ago by
ACPIDaemon is started detached from an object in the startup folder.
comment:5 Changed 15 years ago by
The situation is more complex than I originally reported.
This system can go for a few days and boot the first time, then it will take 5 or 6 attempts to get started. It will hang in one of three places:
- At start of WPS (as originally reported)
- At Boot logo (on any of the BASEDEV= drivers, but usually USBD.SYS, IBM1FLPY.ADD, or DANIS506.ADD).
- Trap 8 (loading UNIAUD, or at end of loading all drivers)
I have tried all the interim releases of ACPI and there seems to be no difference. I have also tried every combination of switches I could think of, including every possible /DV:vector setting to no avail. Changing BIOS settings also does not seem to help.
FWIW I kept a log of boot attempts. Out of 132 boot attempts:
15 ended in Trap 8 (11%)
31 ended hung at the logo (23%)
40 ended hung at the WPS (30%)
HTH
comment:6 Changed 15 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
ACPI-06-16.ZIP
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
Remove pls /OS="Microsoft Windows NT" from command line
comment:7 Changed 15 years ago by
Unfortunately, this new version does not change anything (only the APM.ADD and ACPIDAEMON.EXE files seems to be different). I will upload acpi.log.
Changed 15 years ago by
Attachment: | acpi-6_16.log added |
---|
comment:8 Changed 15 years ago by
Version 3.16 Full works the same as 3.15, except now shutdown does not work (with or without the /R switch).
comment:9 Changed 15 years ago by
This may just be coincidence....
3.16 Full contains the files 'table.dat' and 'table.dsl'. It looks like they are SSDT files (which my BIOS does not have). I put 'table.dat' in the \OS2\BOOT folder and added the line 'FILE TABLE.DAT' to my ACPI.CFG file.
After 44 boots, I have had 2 hangs at the Logo and 2 Trap8 loading UNIAud. No hangs at the WPS. This seems like a huge improvement! Is this the intended use of 'table.dat'?
I still cannot power off properly - it hangs at a blue screen when normally the disk flushes. Reset boots with a check disk every time. This worked fine with 3.15.
Strangely, ACPI shutdown is 'greyed-out' on the XShutdown page in the desktop properties folder. Only APM shutdown is available. I tried re-installing XWP, but the result is the same.
comment:11 Changed 15 years ago by
FWIW - After running this way a couple of days it seems the chance of a boot hang goes up the longer the computer has been turned off.
comment:12 Changed 15 years ago by
acpi.psd don't read your table. It is under construction for SMP. Try latest uniaud pls. Or you must change LACI to another IRQ for boot. For example, add to acpi.cfg LINK LACI 5
comment:13 Changed 15 years ago by
OK, I removed TABLE.DAT. I am using UNIAud 1.9.16 - I believe that is the latest. I added LINK LACI 5 to ACPI.CFG and will run with this for awhile to see if there is any improvement. One thing I notice from acpica$ - the LINK appears to work under 'IRQ links found':
17:1:9 Set: 5 5: 'LACI' (F92D8588) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:6.0
but not here:
17:1:9 0:6.0 10DE:EA IRQs: PCI:9 PIC:'LACI':9 APIC:'APCJ':20 Set: 20
This happens to be the sound card - maybe this is the root of the problems with this hardware? I'll upload acpica$
comment:15 Changed 15 years ago by
No improvement using LINK LACI 5. Also no improvement with the new (7-23) version of ACPI. acpica$ has some new information in it, so I will upload....
comment:18 Changed 15 years ago by
Sorry, as I understand from log, you have comport debugging? Say to me day, when we can set and resolve your problem. Be nice if we will connect online, irc or icq. My icq is 32400130. Resolve process will be - I send acpi.psd - you back log.
comment:19 Changed 15 years ago by
OK... I could spend some time this coming Saturday 8/29 if you are available. I am GMT +4 (east coast US DST) and could do this anytime between 9:00AM and 7:00PM my time. I would also have time on Thursday 8/27 7:00PM to 10:00PM if that is better (probably very late for you). Let me know...
I have not used ICQ, but use SIM with AIM so I will try to set up an ICQ account.
Thanks for this offering!
comment:20 Changed 15 years ago by
Sorry, I afraid I will absent near internet at this week end :( Any day in any week exclude this week end. I see your authorize, so ICQ must work.
comment:21 Changed 15 years ago by
No problem... the next time I will have an opportunity during the daytime will be 9/4 (Friday) between 10:00AM and 7:00PM (= 2:00PM to 11:00PM GMT). Can we make this work?
I did set up an ICQ account: #596909246.
comment:22 Changed 15 years ago by
Ok. I'll reseved for you.When begin your time I send ICQ message for you
Changed 15 years ago by
Attachment: | acpi318.log added |
---|
comment:25 Changed 15 years ago by
I remember, that we want going to online session for debug your problem? Say day in this or next week.
comment:26 Changed 15 years ago by
I'm sorry to say I will be very busy these next few weeks and will only have time to set aside for this on Sundays from 10:00AM to 4:00PM (2:00PM to 8:00PM GMT) both 10/18/09 and 10/25/09. If you can do that, let me know. If not, I understand...
comment:28 Changed 15 years ago by
No change with 3.18S package. There is new information in acpica$ so I will upload.
BTW, I tried to contact you by ICQ this past Sunday - it showed you were online when I did.... is everything alright?
comment:30 Changed 15 years ago by
I started up my system this morning (using the version of ACPI you gave me yesterday)and it hung right away just before the WPS blue screen would normally appear. I captured a comport log for you and will upload...
comment:31 Changed 15 years ago by
Just got home from work, started the computer, and got a Trap0008 after loading drivers. I will upload the COM port log....
comment:32 Changed 15 years ago by
add pls /Ox to acpi.psd string in config.sys, where x - your comport.
comment:33 Changed 15 years ago by
OK... I will upload a couple of boot logo hangs, this time with /O1 (sorry about that!).
I will update the others as they occur...
comment:34 Changed 15 years ago by
Here is a new log after a Trap0008 and also another hang at boot logo....
Changed 15 years ago by
Attachment: | hang at WPS.log added |
---|
ComPort? log during hang right before WPS appears
comment:36 Changed 15 years ago by
Debug kernel is better for this. But I understand. Wait new version, then continue.
comment:37 Changed 15 years ago by
OK, I installed the debug kernel and the 318FB version of ACPI. The only change I see is there are no more Trap0008 - instead it just hangs where there used to be a Trap0008.
I will upload a bunch of logs...
Changed 15 years ago by
Attachment: | Hang at Logo #2 318FB.TXT added |
---|
Second hang at boot logo 3.18GB
Changed 15 years ago by
Attachment: | Hang at Logo #4 318FB.TXT added |
---|
Fourth hang at boot logo 3.18FB
Changed 15 years ago by
Attachment: | Hang during load drivers 318FB.TXT added |
---|
Hang in middle of loading drivers
comment:39 Changed 15 years ago by
Try ACPI318FN.ZIP from betazone. Next, create kdb.ini as:
G
ln
<empty string>
ln need for my look where was stop.
comment:40 Changed 15 years ago by
I got the new ACPI (thanks!) and created kbd.ini as you describe (I hope - I will upload it in case there is a problem). I was able to test booting many times and so far I have only had hangs at the Logo. I will upload logs for them. If any others occur I will upload them as well...
comment:42 Changed 14 years ago by
This morning my system hung right before the WPS would appear.... I will upload the log.
Changed 14 years ago by
Attachment: | Hang before WPS 20091108.TXT added |
---|
Hang before WPS using 20091108
comment:43 Changed 14 years ago by
FYI - since installing 20091108 I have not had any hangs at boot logo, or Trap0008's. Shutdown works and ACPI appears on the XShutdown settings page too. The only problem is the hang before the WPS (always the same). It will happen after the computer has been off for > 1 hour or so. The next attempt will always boot. Reboot attempts after that will always work as well....
comment:44 Changed 14 years ago by
try acpi318APIC.zip pls. APICOnly in acpi.cfg. Only for os4 kernel now. If will success - I do patch for IBM kernels too
Changed 14 years ago by
Attachment: | OS4-1660 with APICOnly.TXT added |
---|
COMport log 318APIC OS4 kernel with APICOnly
Changed 14 years ago by
Attachment: | OS4-1660 no APICOnly.TXT added |
---|
COMport log 318APIC OS4 kernel no APICOnly
comment:45 Changed 14 years ago by
I tried this new version 318APIC. If I add APICOnly to ACPI.CFG boot hangs at the logo with both the OS4 and IBM kernels. If I remove APICOnly from ACPI.CFG I can boot both the OS4 and IBM kernels. I have uploaded COMport logs for the OS4 kernel. (I have logs for the IBM kernel too if you want them).
The real test will come after I power off this computer for at least 1 hour....
comment:46 Changed 14 years ago by
I still get a hang right before the WPS would appear after the machine has been turned off for awhile.... Next attempt to boot works.
comment:49 Changed 14 years ago by
No change with 318APIC1stCall.... except a little more information in ACPICA$ (debug APM?). I'll post it....
I tried with the SVN1920_Unoff kernel too - no difference.
comment:50 Changed 14 years ago by
No change again with ACPI318PREREL. ACPICA$ has new info so I posted it. I tried APICOnly and it would hang at the logo (both OS2 and OS4 kernels) but I could CAD. I still have to boot twice after a power off toget to the desktop....
I wonder if having two APM devices with the same name can cause problems (in my case "")?...
comment:51 Changed 14 years ago by
APICOnly don't tested now. Wait next version. "" usially mean USB drivers
comment:52 Changed 14 years ago by
ACPI318ESR is a step backwards - I can not boot at all with IBM loader and Kernel. The boot hangs at the point the video would normally switch resolution. I will upload a COMPort log.
I can boot with OS4 loader and kernel though...
Changed 14 years ago by
Attachment: | debugACPI318ESR.TXT added |
---|
COMPort log ACPI318ESR with debug kernel
comment:57 Changed 14 years ago by
I experimented with 318ESR some more and found I can also boot with OS4 loader and IBM kernel. I will upload acpica$.
comment:59 Changed 14 years ago by
No change with acpi318ESR2 - with IBM loader and kernel, it hangs in the exact same place. I can only boot if I use the OS4 loader.
Do you want a new COMPort log?
comment:60 Changed 14 years ago by
The latest OS4 loader (2278) with ACPI318ESR2 and IBM kernel will allow this computer to boot the first time every time. Now it behaves like a real computer!
Time to get a new one :-)
comment:61 Changed 14 years ago by
No change with 318SW. I will upload a COMPort log (using IBM loader and IBM kernel) and ACPICA$ (using OS4 loader and IBM kernel).
comment:62 Changed 14 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpi319ForDesktop.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:63 Changed 14 years ago by
I am now using eCS 2.0 GA with latest DANIS (1.8.7) and UNIAud (1.9.5) drivers.
There is no change. I cannot boot this computer using the IBM loader and this new ACPI. It hangs in the same place as before (just before the screen switches resolution for SNAP).The same goes for the ACPI that came with eCS 2.0.
If I use the OS4 loader, I can boot this machine and it works well. ACPI.PSD /SMP /APIC /TMR /R.
comment:64 Changed 14 years ago by
Milestone: | Release version 3.18 → Release version 3.19 |
---|---|
Version: | 3.15 → 3.17 |
Create and attach pls comport log. I understand, that for you all is same, each log can say some for resolving your problem. Better choice - both log. os2 loader and os4 loader.
Changed 14 years ago by
Attachment: | IBMLoader319forDesktop.TXT added |
---|
ACPI 319 for Desktop with IBM Loader
Changed 14 years ago by
Attachment: | OS4Loader319forDesktop.TXT added |
---|
ACPI 3.19 for Desktop with OS4 loader
Changed 14 years ago by
Attachment: | UniaudatIRQ+3.19forDesktop.TXT added |
---|
3.19 for Desktop with Uniaudatirq
comment:68 Changed 14 years ago by
Just like before, it hangs a little sooner in the boot process with the debug kernel.
Changed 14 years ago by
Attachment: | debug+ACPI3.19fordesktop+uniaudatirq.TXT added |
---|
COMPort log with debug kernel and ACPI 3.19 for desktop and Uniaudatirq
comment:69 Changed 14 years ago by
If your machine has 2 comport, try disable com2 in BIOS? Kernels debug output now going via com2. acpi via com1
comment:70 Changed 14 years ago by
to add: You can create kdb.ini at root on boot drive with next context:
.b 115200t 1
g
Changed 14 years ago by
Attachment: | debug+ACPI319FD+uniaudatirq+NOCOM2.TXT added |
---|
ACPI 3.19 For Desktop with UniAudatirq? and debug kernel with COM2 turned off.
comment:72 Changed 14 years ago by
add pls ln to kdb.ini and repeat log. Best for kdb.ini
.b 115200t 1
g
ln
k
ks
kb
comment:73 Changed 14 years ago by
to add. Also you cat type ln<enter>, ks<enter> e.t.c. from your comport terminal
Changed 14 years ago by
Attachment: | debug+ACPI319FD+Uniaudatirq+NOCOM2#2.TXT added |
---|
Debug kernel, ACPI3.19 for desktop, UniAudatirq? and no COM2 with new kbd.ini
comment:74 Changed 14 years ago by
OK... I changed kbd.ini but it did not make any difference. Typing the commands on the terminal did get extra info. Uploaded...
comment:75 Changed 14 years ago by
Do you sure, that os2krnl.sym is right? I don't see int 3 at this label. Check pls os2krnl.sym, if this is right, type 10 times u<enter> in your terminal.
comment:76 Changed 14 years ago by
Ok. you have not compared os2krnl.sym for debug os2krnl 104a_SMP. I find where this problem - I need think
Changed 14 years ago by
Attachment: | debug+ACPI319FD+Uniaudatirq+NOCOM2#3.TXT added |
---|
debug kernel and .sym + ACPI 3.19 For Desktop + Uniaudatirq + No COM2
comment:77 Changed 14 years ago by
You are correct, I did not use the debug SYM file. Now I have installed it and uploaded the COMPort log, plus the kbd.ini commands and 10x u.
comment:78 Changed 14 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
AcpiFor405.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
Need log + ln + u if has int 3
Changed 14 years ago by
Attachment: | debug+ACPIfor405+ln+u.TXT added |
---|
debug kernel + ACPIfor405 +uniaudatirq + No COM2 + ln + u
comment:79 Changed 14 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpifor405-1.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
if you have trap, I need in log + ln + u. Next. you need change kernel to retail (non debug) make photo of trap and attach here.
Changed 14 years ago by
Attachment: | debug+ACPIfor405+ln+u.2.TXT added |
---|
debug kernel+ACPIfor405-1+Uniaudatirq+NoCOM2+ln+u
comment:81 Changed 14 years ago by
Replying to David McKenna:
This one also will not boot with the OS4 loader...
Turns out this is not true... I CAN boot the retail kernel with the OS4 loader (I still had the debug kernel with ACPI.PSD /O1 but the null modem was removed).
No need for a photo... with the IBM loader, retail kernel and ACPIfor405-1 boot hangs on a blank screen right before it would switch to the desktop. This has been the case all along.
comment:82 Changed 14 years ago by
My analysis of debug+ACPIfor405+ln+u.2.TXT says you are using the wrong .sym file.
My best guess is that the trap in right before BeginIntHook? in intIRQRouter.
The correct .sym file is
8-11-05 9:50 192,148 0 os2krnl.sym
with md5
a8f73100668f6c610867079ee44f33bd *os2krnl.sym
Please check this.
comment:83 Changed 14 years ago by
You are correct, that is not the SYM file I am using. I am using:
6-11-09 4:07 173,188 0 os2krnl.sym
found in the \OS2IMAGE\DEBUG\SMP directory on the eCS 2.0 GA disc 1. There is only one other os2krnl.sym file on that disc and it is in the \UNI directory also dated 6-11-09.
Where can I find the SYM file you require?
comment:84 Changed 14 years ago by
OK... I found the correct debug SYM file. I will install and re-do the last COM port log.
I notice also that the kernel in the DEBUG\SMP directory on the eCS CD is different... it is also dated 6-11-09 and is 1,000,533 in size. Or maybe these are not debug files?
Sorry for all this confusion...
comment:85 Changed 14 years ago by
IBM has odd naming conventions, at times.
I assume you found \OS2IMAGE\DEBUG\SMP\OS2KRNLB.SYM. Just in case you don't know, you need to rename it when you copy it to the root of you boot volume. PMDF can use it without renaming.
Changed 14 years ago by
Attachment: | Correct Debug + Acpi405-1+ln+u.TXT added |
---|
Corrected debug files + ACPI405-1 + ln +u
comment:86 Changed 14 years ago by
No.. I did not know that. I googled 'OS/2 SMP debug kernel' and found a site that had IBM OS/2 kernels (retail and debug) going back a decade. I got 'smp0811d.zip' which contained an OS2KRNL which matches my current debug kernel, and an OS2KRNL.SYM which matches the one in your description. I installed and the COMport log is uploaded.
I hope everything is in sync now....
comment:87 Changed 14 years ago by
Owner: | changed from pasha to eco |
---|
comment:88 Changed 13 years ago by
Tried the new ACPI319CR4 - here are the results:
SMP kernel IBM loader and ACPI.PSD /Q : system boots
UNI kernel IBM loader and ACPI.PSD /Q : system boots
SMP kernel IBM loader and ACPI.PSD /SMP /APIC /TMR /Q : system hangs before screen res switch
SMP kernel OS4 loader and ACPI.PSD /SMP /APIC /TMR /Q : system boots
I will upload logs...
Changed 13 years ago by
Attachment: | SMPacpicr4.log added |
---|
ACPI319CR4, SMP kernel, IBM loader, ACPI.PSD /Q
Changed 13 years ago by
Attachment: | UNIacpicr4.log added |
---|
ACPI319CR4, UNI kernel, IBM loader, ACPI.PSD /Q
Changed 13 years ago by
Attachment: | APICacpicr4COM.log added |
---|
ACPI319CR4, SMP debug kernel, IBM loader, /SMP/APIC COM log
Changed 13 years ago by
Attachment: | OS4acpicr4.log added |
---|
ACPI319CR4, SMP kernel, OS4 loader, /SMP/APIC
comment:89 Changed 13 years ago by
Owner: | changed from eco to pasha |
---|
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpi319PollingFullOnly.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:90 Changed 13 years ago by
I tried the PollingFull? version and the results are similar to CR4 - I can boot in PIC mode, but not in APIC mode unless I use the OS4 loader. I will upload logs...
Changed 13 years ago by
Attachment: | acpipollingfullUNI.log added |
---|
ACPICA$ with UNI kernel ACPI.PSD /Q
Changed 13 years ago by
Attachment: | acpipollingfullSMP.log added |
---|
ACPICA$ with SMP kernel ACPI.PSD /Q
Changed 13 years ago by
Attachment: | acpipollingfullACPIIBMCOM.txt added |
---|
COM log SMP debug kernel ACPI.PSD /SMP /APIC /TMR /O1 /Q
Changed 13 years ago by
Attachment: | acpipollingfullAPICOS4.log added |
---|
ACPICA$ SMP kernel ACPI.PSD /SMP /APIC /TMR /Q + OS4 load
comment:91 Changed 13 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpi319PollingFullOnly.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:93 Changed 13 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
ACPIFIXVW-2011-04-12.ZIP
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:94 Changed 13 years ago by
Since my last report I have changed my hardware by adding an Adaptec AIC160 SCSI adapter and two (C:=9GB and D:=80GB) drives and removed the SATA drive. I had to add 'REMAP 18 TO 11' to ACPI.CFG to get the SCSI drive to boot with OS4 loader in APIC mode. I still could not boot with the IBM loader in APIC mode (PIC works fine). This was using the 3.18 version of ACPI that comes with eCS 2.0.
With this new ACPIFIXVW version, I can now boot using the IBM loader in APIC mode. Thanks! It seems to boot a little faster too.
Now I am having trouble shutting down - either APM or ACPI shutdown (in the eWP shutdown dialog) hangs after closing filesystems at a blue screen. Even CAD doesn't work. I can shut down using the 'Poweroff' utility in C:\ecs\ACPI\Util. Not sure if this is ACPI related or not... it happens even with version 3.18.
I'll upload ACPICA$
Changed 13 years ago by
Attachment: | acpiFIXVW.log added |
---|
ACPICA$ using ACPIFIXVW-2011-04-12 in APIC mode with IBM
comment:95 Changed 13 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpi319for105-2011-05-30.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:96 Changed 13 years ago by
I have not installed eCS 2.1 (which has the 14.105 kernel) on this hardware yet. Should I wait to test this ACPI version after installing 2.1 or do it now (with 14.104a kernel)?
comment:97 Changed 13 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
acpi319APICFix-20110605.zip
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:98 Changed 13 years ago by
I have installed (migrated) eCS 2.1 onto this hardware. I also installed acpi319APICFix2. I can boot in PIC mode, but not in APIC mode (IBM loader nor OS4 loader). I have added 'GPEDisable 0x00' to ACPI.CFG in order to be able to shut down completely. I have collected COMport logs, but not with debug kernel because I can not find version 14.105 debug. I will upload...
Changed 13 years ago by
Attachment: | acpiapic319fix2.TXT added |
---|
ACPI.PSD /SMP /APIC /TMR /O1 /Q COMPort log
Changed 13 years ago by
Attachment: | acpiapic319fix2remap.TXT added |
---|
ACPI.PSD /SMP /APIC /TMR /O1 /Q COMPort log with REMAP 18 TO 11
comment:99 Changed 13 years ago by
I should add:
I used to be able to add 'REMAP 18 TO 11' in ACPI.CFG and boot in APIC mode using the OS4 loader, but this does not work with acpi319APICfix2. See log...
comment:100 Changed 13 years ago by
You can't use IRQ11 for remap, because IRQ11 is using by another device. Try do next:
LINK LNK3 4
REMAP 18 TO 4
I mean, 1st you change PIC IRQ link to free value of IRQ, then remap to this IRQ. Attach comport log after doing pls.
comment:101 Changed 13 years ago by
To add. In some BIOS IRQ link can save changes value, check this too
comment:102 Changed 13 years ago by
What other device is using IRQ11? I don't see it...
You ask to LINK LNK3 4, but COM1 uses IRQ4. I need that for COMPort log :-)
REMAP 18 TO 11 worked with 3.18, now it doesn't.
There is no way to assign IRQ in BIOS. I disabled IDE and SATA (I don't use them now) in BIOS to free IRQ's. Now everything has it's own IRQ (except USB ports all share).
Anyway, I will try your idea and report...
comment:103 Changed 13 years ago by
Owner: | changed from pasha to David Azarewicz |
---|
comment:104 Changed 13 years ago by
OK... I finally got a chance to do this. I added:
LINK LNK3 4
REMAP 18 TO 4
to ACPI.CFG.
Boot hangs at the boot logo. I will upload COMPort log...
comment:105 Changed 12 years ago by
This hardware works fine with version 3.19.14 using the /VW switch (because of the Adaptec U160 driver). Go ahead and close this ticket. Thanks!
comment:106 Changed 12 years ago by
Resolution: | → fixed |
---|---|
Status: | new → closed |
Great! Thanks for testing.