Custom Query (34 matches)

I am using OS2AHCI 1.22, from the eCS betazone, on my Asus M3A78-EM motherboard, with AMD quad core Phenom processor, and a new Seagate 500 GB SATA III drive. I had problems with my old Maxtor 250 GB SATA drive, and the old AHCI version so I wasn't using AHCI previously.

With OS2AHCI 1.22, I ran okay for about 3 hours, while I did my backups using BackAgain?/2000, putting the backup files on the same disk. That all worked good (roughly 4.1 GB total output, in 3 files). The next step was to burn those files to a SATA DVD drive, using DVDDAO. As soon as I started DVDDAO, the system trapped (trap000d). I got a picture of that in AHCITRAP.jpg, but something went wrong when I tried Ctrl-Alt+Numlck+Numlck. and I didn't get anything else (looks like my diskette drive died). After I rebooted, I did the DVD burn, with no trouble.

I tested all AHCI driver up to the latest 1.3.0 eCS 2.2 beta is able to boot in AHCI mode like in IDE mode.

I have following drivers into config.sys and in the following sequence: BASEDEV=OS2AHCI.ADD /n BASEDEV=DANIS506.ADD /!BIOS ... BASEDEV=DANIATAP.FLT BASEDEV=OS2DASD.DMD

My PATA CDROM is never detected ! Why ?

Cheers/2 Remy

Same type issue as ticket #9 ​http://svn.ecomstation.nl/ahci/ticket/9 Enable AHCI in the BIOS results in the same message as the picture there has: OS/2 is unable to operate your hard disk or diskette drive, The system is stopped. Correct the preceding error and restart the system. This was true with the version that shipped with eCS 2.1 (1.12) as well as with 1.19 that I built from SVN. I will also attach a diff I tried too, but it did not help.