Custom Query (34 matches)
Results (7 - 9 of 34)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #11 | fixed | ahci unable to operate T410 | ||
| Description |
Same type issue as ticket #9 http://svn.ecomstation.nl/ahci/ticket/9 Enable AHCI in the BIOS results in the same message as the picture there has: OS/2 is unable to operate your hard disk or diskette drive, The system is stopped. Correct the preceding error and restart the system. This was true with the version that shipped with eCS 2.1 (1.12) as well as with 1.19 that I built from SVN. I will also attach a diff I tried too, but it did not help. |
|||
| #20 | fixed | trap 3 Open Watcom build | ||
| Description |
Seeing that the Open Watcom build was now working I decided to give it a try just to see if it would make a difference with ticket #11. It doesn't but that wasn't unexpected. It was unexpected that there is an int 3 call in devhelp.h DevHelp_VirtToPhys. The int 3 seems to get called on each boot, removing the int 3 allows the boot to proceed. This ticket may be premature but the r144 says that it fixed the Open Watcom build. |
|||
| #33 | NoChangeNeeded | OS2AHCI 1.3.0 | ||
| Description |
I tested all AHCI driver up to the latest 1.3.0 eCS 2.2 beta is able to boot in AHCI mode like in IDE mode. I have following drivers into config.sys and in the following sequence: BASEDEV=OS2AHCI.ADD /n BASEDEV=DANIS506.ADD /!BIOS ... BASEDEV=DANIATAP.FLT BASEDEV=OS2DASD.DMD My PATA CDROM is never detected ! Why ? Cheers/2 Remy |
|||
