Opened 15 years ago
Closed 12 years ago
#374 closed defect (fixed)
ASUS M3A79-T Deluxe & AMD Phenom II X4 920 no USB & additional no APIC mode
Reported by: | Karlheinz Schmidthaus | Owned by: | |
---|---|---|---|
Priority: | major | Milestone: | Feedback pending |
Component: | ACPI PSD | Version: | |
Keywords: | Cc: | Karlheinz Schmidthaus, ecslist@… |
Description
The first problem is that the USB drivers are loaded but the USB mouse does not work. After the installation (only with PS/2-keyboard working) I found no solution to use the USB mouse or an USB memorystick. The switch /CD does not help.
Attachments (29)
Change History (61)
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T.ziq added |
---|
Changed 15 years ago by
Changed 15 years ago by
Changed 15 years ago by
Attachment: | p_3294.jpg added |
---|
comment:1 Changed 15 years ago by
comment:2 Changed 15 years ago by
e-co:
USB problems..
What happens if you disable USB Legacy in BIOS Setup?
comment:3 Changed 15 years ago by
Can you disable FireWire? controller in BIOS? Do you sure, that you TV driver can use high IRQ?
comment:4 Changed 15 years ago by
Cc: | Karlheinz Schmidthaus added |
---|
USB Legacy is disabled in BIOS Setup. I'm installed Panorama as video driver. Just 10 minutes ago i test without the ACPI.PSD and the system is running including USB Mouse.
comment:6 Changed 15 years ago by
additional note: without ACPI.PSD the network is running, I can ping the gateway. With ACPI.PSD in PIC mode it doesn't.
Changed 15 years ago by
Attachment: | rmview_irq_without_acpi.log added |
---|
Changed 15 years ago by
Attachment: | rmview_irq_with_acpi.log added |
---|
comment:7 Changed 15 years ago by
The system boot with os2apic.psd in pic mode (networking is running and the usb-mouse is working), but it use 50W more power. How can I help to fix the problem with acpi.psd ?
comment:8 Changed 15 years ago by
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
ACPI-APIC-BAT.ZIP
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:9 Changed 15 years ago by
Nothing changed, no mouse (USB) and networking if ACPI.PSD is loaded.
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T_090209_PIC.ziq added |
---|
with testbuild announced of 2009-02-09
comment:10 Changed 15 years ago by
Why you don't use /SMP options? For add /APIC you need check driver for "Marvell Yukon 88E8056". Right driver is in ecomstation.ru
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T_090210_SMP.ziq added |
---|
Test with /SMP (USB not working, no LAN connection)
comment:12 Changed 15 years ago by
Try use psd=acpi.psd /SMP /APIC and with /CD or without. You have many devices in IRQ10 and IRQ11. It can be problem for USB. APIC mode change IRQ and can help you
comment:13 Changed 15 years ago by
with /SMP /APIC /CD the system does not boot. I see many lines with "PIC MASK IRQ0 mask:FFFFDCF9" on the screen in a loop.
comment:14 Changed 15 years ago by
Photo of screen is better. Check for right options. Must be /SMP /APIC. /CD or not /CD need try. BTW, do you try with /SMP /APIC /CD and /SMP /APIC ?
Changed 15 years ago by
Attachment: | P_3297.jpg added |
---|
last screen with ACPI.PSD /SMP /APIC and removing all USB-drivers from the config.sys
comment:17 Changed 15 years ago by
can I help you with debugging over serial cable? If yes, how to do it? Serial port and cable to another PC is available and working with a terminal program.
comment:18 Changed 15 years ago by
if you have a netop guest license I can give you access to the machine with the debugging console.
Changed 15 years ago by
comment:19 Changed 15 years ago by
here you need add /O1 only. 1 mean com1, if use com2 - /O2. And place attached file to root of boot drive. I mean psd=acpi.psd /SMP /APIC /O1
comment:20 Changed 15 years ago by
Note: same problem as other boards with AMD chipset?
But one thing is not the same: Some devices (USB & LAN) are only working if ACPI is not loaded.
comment:21 Changed 15 years ago by
Why does loading ACPI.PSD in PIC mode cause problems?
The OS2APIC.PSD is working, but cause high power consumption (additional 50W)
comment:22 Changed 15 years ago by
Log from ACPI315PRE.ZIP pls
Please download experimental ACPI build from Mensys site:
- Experimental build for you:
ACPI315PRE.ZIP
- Read instructions: http://ecomstation.ru/projects/acpitools/?action=testcase
comment:23 Changed 15 years ago by
Cc: | ecslist@… added |
---|
comment:24 Changed 15 years ago by
can you join to irc or ask to ICQ:32400130? For peer to peer debug. Else we will have debug very long time. If irc - say me about network/channel
comment:25 Changed 15 years ago by
Version: | 3.14 → 3.15 |
---|
Since 2009-03-26 it is running with a special testbuild of acpi.psd 3.15 and the following mapping in the acpi.cfg:
LINK LNKA 7 LINK LNKB 10 LINK LNKC 10 LINK LNKD 11 LINK LNKE 10 LINK LNKG 10
But a big general SMP problem is not solved: the power consumption is 60W higher than running the W4 Kernel without ACPI.
Note: setgetstate does not work with AMD. I hope that this will be fixed.
comment:26 Changed 15 years ago by
Owner: | pasha deleted |
---|
comment:27 Changed 15 years ago by
with ACPI 3.15 (20090509, filesize Archiv 3182717 bytes) the system break after calling "acpiirq 1"
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T_090525_Test_NOD.ziq added |
---|
Test with /SMP /!NOD
Changed 15 years ago by
Attachment: | ZOC090525-002.LOG added |
---|
kernel Console trace without any parameter
Changed 15 years ago by
Attachment: | ZOC090525-006.LOG added |
---|
Kernel Console Trace with /SMP /R and link table
Changed 15 years ago by
Attachment: | ZOC090525-007.LOG added |
---|
Kernel Console Trace with /SMP /APIC - fails
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T-ACPI_PIC_090603-001.ziq added |
---|
ACPI 3.16 only working in pic mode with /!NOD or link table
comment:28 Changed 15 years ago by
note about power consumption: with W4-Kernel: 118 W Windows XP: 108 W with SMP-Kernel: 158 W
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T_090609_SMP_NOD.ziq added |
---|
comment:29 Changed 15 years ago by
Milestone: | Release version 3.15 → Release version 3.16 |
---|---|
Version: | 3.15 |
After shutdown with poweroff running ACPI 3.16 with with /SMP /!NOD the system does not start after powerON. The result is a black screen, no bios menu or other. I need more that one reset od additional poweroff to force it working. Without ACPI and running the W4-Kernel it's always ok.
Changed 15 years ago by
Attachment: | acpi-log-M3A79-T-Deluxe_ACPI317_090909.ziq added |
---|
/SMP /PIC /!NOD
comment:30 Changed 15 years ago by
after running "acpiirq 1" the system lost devices like the HDD connection.
comment:31 Changed 12 years ago by
Milestone: | Release version 3.19 → Feedback pending |
---|
This ticket is really old and not really relevant to the current software. Have you tried the current version?
comment:32 Changed 12 years ago by
Resolution: | → fixed |
---|---|
Status: | new → closed |
No response from reporter.
The system is installed and running with panorama in PIC mode with the SMP kernel but there is no USB support. (eCS 2.0 RC6a)
Filesystem: Bootable JFS Memory: 4GB Graphic Card: HIS HD4350 Silence 512 MB Onboard Networking: loading, but not working