Opened 11 years ago

Closed 10 years ago

#244 closed defect (fixed)

The PS/2 mouse stops working if ACPI is used. Also the reboot hangs if ACPI is installed. The Ahteros AR5006 family 802.11 wireless NIC does not work with ACPI installed or not.

Reported by: guest Owned by: guest
Priority: minor Milestone: Release version 3.10
Component: ACPI PSD Version: 3.09
Keywords: ACPI, Mouse, genmac Cc:

Description

The PS/2 mouse stops working if the ACPI driver is used. Also reboot hangs if the ACPI driver is used. The Ahteros AR5006 family 802.11 wireless NIC does not work with ACPI installed or not.

Attachments (3)

acpi-log-Model-of-your-PC.ziq (95.6 KB) - added by guest 11 years ago.
acpi_APIC.log (24.3 KB) - added by guest 11 years ago.
LOGS.zip (115.7 KB) - added by guest 11 years ago.

Download all attachments as: .zip

Change History (7)

Changed 11 years ago by guest

comment:1 Changed 11 years ago by stevenhl

  • Milestone changed from eCS 2.0 to Release version 3.10

comment:2 Changed 11 years ago by guest

What is the model of notebook? Acer notebook, AMD CPU.

? Can you boot the PC and grab the log, we should look at the head of the log.

Changed 11 years ago by guest

Changed 11 years ago by guest

comment:3 Changed 11 years ago by guest

  • Owner changed from pasha to guest
  • Status changed from new to assigned

# Name: Tapio Angervuori # email: tapio.angervuori@…

Computer: Acer Aspire 7520, CPU AMD Turion 64 x2 Mobile Technology TL-58 1900 MHz, Two 250 GB hard disks. Phoenix Bios.

I ran the Setup Defaults From the bios setup menu. The PS/2 mouse started working?%??! This setup changes only the Boot priority order to default. It is not possible to configure anything else from the bios menu.

I also changed the ACPI IRQ number from 9 to 4. Previously there were small pauses relating to spikes seen in the CPU load monitor. These pauses/spikes do not appear after the IRQ number is changed.

Here are the new log files;

comment:4 Changed 10 years ago by eco

  • Resolution set to fixed
  • Status changed from assigned to closed
Note: See TracTickets for help on using tickets.