Opened 11 years ago

Closed 9 years ago

#237 closed defect (unknown)

VDM's not working with 3.08 in APIC...

Reported by: eco Owned by:
Priority: major Milestone: Release version 3.18
Component: ACPI PSD Version: 3.11
Keywords: Cc:

Description

I've read the Tickets about VDM's not working. Doesn't seem like a satisfactory answer to me. 2.22 the VDM's work. 3.08 the VDM's don't. Need to use 3.08 to use the onboard HDA audio and Nvidia Lan - so what's the solution? If I invoke a VDM the system will hang completely within about 15 seconds. If I close the window before this, then the system will stay up. Only get a flashing cursor in the VDM.

Attachments (1)

acpi311.jpg (178.5 KB) - added by jojo 10 years ago.

Download all attachments as: .zip

Change History (24)

comment:1 Changed 11 years ago by guest

Hardware support within the VDM for non-conforming drivers is not very important - but disk access to local and mapped network drives and DPMI support.. Dosbox/2 runs very slow so that it is not a realistic option.

comment:2 Changed 11 years ago by guest

Also - !nod is not a good option - as then I have IRQ conflicts that prevent the onboard sound from working. Even with /!nod the VDM doesn't work properly - but with 2.22 it worked perfectly.

comment:3 Changed 11 years ago by guest

Also - starting a VDM and the subsequent crash of the VDM kills my network ( RTSND -netbios over tcpip -- the other NIC -tcpip only- ((nvidia onboard )) continues to work....

comment:4 Changed 11 years ago by pasha

Try /!NOD instead /NOD

comment:5 Changed 11 years ago by guest

I did use /!NOD ....

comment:6 Changed 11 years ago by pasha

can you do copy acpica$ acpi.log and attach acpi.log here

comment:7 Changed 11 years ago by guest

I have attached a compendium of logs to #235 - unless you want me to generate them in a different way?

comment:8 Changed 11 years ago by guest

did anyone look at this?

comment:9 Changed 11 years ago by stevenhl

  • Milestone changed from eCS 2.0 to Release version 3.10

comment:10 Changed 10 years ago by eco

e-co:

Current status:

Q82: DOS/WinOS2 do not work with /APIC A82: There are systems working in APIC mode on which WinOS2 and DOS work

just fine.

In general, DOS/WinOS2 are not supported in SMP APIC.

One of possible causes: WinOs2 and DOS sessions support 16 IRQs only, VPIC.SYS for this session support 16 IRQs too. DOS never supported more than 15 IRQs, and it is not going to change. WinOS2 is based on DOS, and it is not going to change either.

comment:11 Changed 10 years ago by stevenhl

  • Milestone changed from Release version 3.10 to Release version 3.11

comment:12 Changed 10 years ago by jojo

  • Version changed from 3.08 to 3.11

Gerrit Schoenmaker is able to run VDM (DOS and Win-OS2) sessions now.

PSD=ACPI.PSD /SMP /APIC /TMR /!NOD /CD

See attached screenshot.

System details:

BIOS Information Block Vendor: Phoenix Technologies, LTD Version: ASUS A8N-SLI Premium ACPI BIOS 1011-005 Release: 01/18/2006

Processor Socket Designation: Socket 939 Processor Manufacturer: AMD Processor Version: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+

Changed 10 years ago by jojo

comment:13 Changed 10 years ago by pasha

With /!NOD this computer has only low IRQ, so VDM must work

comment:14 Changed 10 years ago by pasha

log from acpi.psd 3.14 or 3.15 if be ready

comment:15 Changed 10 years ago by stevenhl

  • Milestone changed from Release version 3.15 to Feedback pending

comment:16 Changed 10 years ago by pasha

Please download experimental ACPI build from Mensys site:

  • Experimental build for you:

ACPI-APIC-BAT.ZIP

comment:17 follow-up: Changed 10 years ago by stevenhl

  • Reporter changed from guest to jojo

comment:18 in reply to: ↑ 17 Changed 10 years ago by jojo

Replying to stevenhl:

Please note I (jojo = joachim) am not the original reporter!

comment:19 Changed 10 years ago by stevenhl

  • Milestone changed from Feedback pending to Release version 3.11
  • Reporter changed from jojo to guest
  • Resolution set to unknown
  • Status changed from new to closed

comment:20 Changed 10 years ago by stevenhl

  • Milestone changed from Release version 3.11 to Feedback pending
  • Reporter changed from guest to eco

comment:21 Changed 10 years ago by stevenhl

  • Resolution unknown deleted
  • Status changed from closed to reopened

comment:22 Changed 10 years ago by pasha

  • Owner pasha deleted
  • Status changed from reopened to new

comment:23 Changed 9 years ago by stevenhl

  • Milestone changed from Feedback pending to Release version 3.18
  • Resolution set to unknown
  • Status changed from new to closed
Note: See TracTickets for help on using tickets.