RTL8168 does not work - debug output attached

[andib]

Does not work for 8168. New ticket as the other realtek tickets as far as I can see do not include serial debug output, I can compile the driver by myself when someone checks in corrected files to svn, I can log debug out from com1 and I'm willing to test any change to get this chip running.

---

Driver version (revision 18)

{0}[q:\ibmcom\macs] bldlevel R8110.os2
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature: @#Mensys BV:0.1#@##1## 25 Apr 2011 11:06:33 BANZAI ::::2::Beta@@Realtek 8110/1Gb PCIe MAC Driver
Vendor: Mensys BV
Revision: 0.01
Date/Time: 25 Apr 2011 11:06:33
Build Machine: BANZAI
FixPak Version: Beta
File Version: 0.1.2
Description: Realtek 8110/1Gb PCIe MAC Driver

---

pci output -

Bus 4 (PCI Express), Device Number 0, Device Function 0
Vendor 10ECh Realtek Semiconductor
Device 8168h RTL8168/8111 PCI-E Gigabit Ethernet NIC
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Ethernet
Subsystem ID 360C1462h Unknown
Subsystem Vendor 1462h Micro-Star International Co Ltd (MSI)
Address 0 is an I/O Port : D800h
Address 1 is not present or not configured!
Address 2 is a Memory Address (64-bit) : FEAFF000h
System IRQ 5, INT# A
Expansion ROM of 128 KiB decoded by this card, currently disabled
New Capabilities List Present:

Power Management Capability, Version 1.1

Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)

Vital Product Data Capability

VPD Data not present

Message Signalled Interrupt Capability

MSI is disabled
MSI function can generate 64-bit addresses

PCI Express Capability, Version 1

Device/Port Type :

PCI Express Endpoint Device

Device Capabilities :

Attention Button Present on Device
Attention Indicator Present on Device
Power Indicator Present on Device
Unsupported Request Severity is Fatal

Device Status :

Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
AUX Power Detected

Link Capabilities :

Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0

Link Control :

Asynchronous Clocking in Use

Link Status :

Current Link speed : 2.5Gb/s
Current Link Width : x1

Vendor-Dependant Capability

---

LANTRAN.LOG -

IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational.
IBM OS/2 NETBEUI 6.00.0
NETBEUI: Using a 32-bit data segment.
IBM OS/2 TCPBEUI 6.00.0
TCPBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( May 25, 2005)

IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
Adapter 1 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
IBM OS/2 LAN Netbind
PRO0021: A general failure occurred when the program tried to bind VECTOR to R8110_NIF.
TCPBEUI: Logical adapter 1 is trying to bind to TCP/IP interface lan0.
LT00141: Errors occurred while attempting to initialize TCPBEUI.

---

debug output -
ProcessParms DRIVERNAME

ProcessParms

ProcessParms DRIVERNAME

ProcessParms

ProcessParms DRIVERNAME

ProcessParms

ProcessParms DRIVERNAME

ProcessParms

ProcessParms DRIVERNAME

ProcessParms MODE

ProcessParms RXCHAIN

ProcessParms return 0

checkDevice enter.

checkDevice. Dev 10EC 0

checkDevice Dev.setFlags FF7E1880

checkDevice rc=1 Dev.setName RTL8169sb/8110sb

RTL_DEVICE::setup enter.

Cannot find base address.

checkDevice enter.

checkDevice exit rc=0.

---

[David Azarewicz]

The R8110 driver has been replaced by the R8169 driver. Please read the wiki for the reasons why: ​http://svn.ecomstation.nl/multimac/wiki Please try the R8169 driver.