Opened 17 years ago

Closed 16 years ago

Last modified 16 years ago

#91 closed defect (duplicate)

SB Audigy LS (1102:0007) no sound

Reported by: Steve Wendt Owned by: Brendan Oakley
Priority: normal Milestone: ALSA Hardware Compatibility
Component: UNIAUD32 Version: 1.1.4RC4
Severity: normal Keywords:
Cc:

Description

Card will be detected at boot. Audiosubsystem works, to ex. PM123 runs normally. I cannot set anything with unimix. Enabling systemsounds is possible without problems.

But still no sound output like in RC3.

Jabber: turbodriver@…

Attachments (1)

debuginfo.zip (6.2 KB ) - added by Steve Wendt 17 years ago.

Download all attachments as: .zip

Change History (8)

by Steve Wendt, 17 years ago

Attachment: debuginfo.zip added

comment:1 by Steve Wendt, 17 years ago

Probably duplicate of ticket 37 - try 114rc1.

in reply to:  description ; comment:2 by Yoda, 17 years ago

Card will be detected at boot. Audiosubsystem works,

So you havve sound ?

Enabling systemsounds is possible without problems.

System sound play normally ?

But still no sound output like in RC3.

So, what are you missing ?

It "sounds" like most are ok, or what ??

in reply to:  2 comment:3 by Steve Wendt, 17 years ago

Replying to yoda:

Card will be detected at boot. Audiosubsystem works,

So you havve sound ?

No, can hear nothing, but all apps that use the audio system are working

Enabling systemsounds is possible without problems.

System sound play normally ?

System has no hangs if system sounds are on, but no output of them.

But still no sound output like in RC3.

So, what are you missing ?

It "sounds" like most are ok, or what ??

I think something is wrong with the mixer functions. Volume 0, power state 0 If I try to set anything with unimix the result is always 0. card.log says:
Card info:

num: 0
id: CA0106
driver: CA0106
name: CA0106
longname: Live! 7.1 24bit [SB0410] at 0xe000 irq 12
mixer:
componenets:

I think the mixer is not detected, not enabled, offline (?)

comment:4 by Yoda, 17 years ago

Owner: set to Brendan Oakley

Please test the new uniaud 1.1.4 RC5, which should have fixes for SB Live.

comment:5 by Brendan Oakley, 16 years ago

Component: MixerUNIAUD32
Priority: normallow
Summary: SB Live! 7.1 24bit [SB0410] no soundSB Audigy LS (1102:0007) no sound
Version: 1.1.41.1.4RC4

I am confused by the phrase "still no sound output like in RC3." This could mean that, like RC3, RC4 has no sound output with this hardware; or it could mean that it does not have sound output like that which is heard in RC3.

If RC3 had sound, this is a regression, so we should fix it in 1.1.4GA. If not, we need to move it to the "ALSA Hardware Compatibility" milestone.

Unfortunately, this is not the same model of SB Audigy I have, so I can't test.

Changed priority to low because the reporter has not responded in 6 months.

comment:6 by Brendan Oakley, 16 years ago

Resolution: duplicate
Status: newclosed

Duplicate of ticket:63.

According to it, RC3 was also silent.

comment:7 by Brendan Oakley, 16 years ago

Milestone: 1.1.4GAALSA Hardware Compatibility
Priority: lownormal
Note: See TracTickets for help on using tickets.