AHCI traps in Os2kernel

[tellie]

Hi,
tried today the Ahci v1.4
Have the Intel PCh AHCI (8036:3622)
Class:0x010601 bus:0 dev : 0xfa
Gigabyte MB the P55
Have /smp /Apic

Enable Ahci in Bios
Then i see logo and a trap in Os2kernel

[cjm]

I'm a bit puzzled by the AHCI version you reported. The current "bleeding edge" version of OS2AHCI is 1.22...

I would need further information about the kernel trap for analysis...

Thanks,
--Christian

[tellie]

Hello,
Replying to cjm:

I'm a bit puzzled by the AHCI version you reported. The current "bleeding edge" version of OS2AHCI is 1.22...

Sorry where my mistake i have used os2ahci_v0-1-4.zip

I would also need further information about the kernel trap for analysis...

Only thing i can send is a screenshot of the trap

Thanks,
--Christian

[cjm]

Hmmm... 0-1-4 is not exactly an official version of OS2AHCI, either -- the first generally available version was 1.04 if I remember correctly. Either way, a screen shot of the trap would definitely help.

If you have a serial port on this mainboard and a null modem cable, plus a second computer with a terminal program, you may also connect the two computers and set your terminal program to 9600 baud, no parity, 8 bits, one stop bit and no flow control. Then add the parameters "/d /d" to the OS2AHCI command line, boot the system and send us the information sent to the terminal program.

Thanks,
--Christian

[tellie]

Hi Chris,

Sorry for late response.
But fighting with Ecs atm.
For the last month i'm running Ecs in Vbox.
So i cannot test the Achi and i can't find where i left the screenshot from the error i had, mayby when i get Ecs up again, i might reopen this, for now you can close this.