Custom Query (34 matches)
Results (25 - 27 of 34)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#28 | worksforme | Machine freezes at eCS Splash screen with OS2AHCI ver. 1.28 or 1.29 | ||
Description |
Hardware: Asus M5A88-V EVO + AMD quad-core CPU 2 x 500GB SATA drives connected to motherboard ports 2 x SCSI hard disks and one SCSI tape drive attached to LSILogic PCI card This all works with OS2AHCI ver. 1.25, but with ver. 1.28 or 1.29 there is intermittent disk activity while the eCS splash screen is displayed, then the hd activity LED shows "solid" for quite a while, then nothing: the machine will not continue booting. |
|||
#29 | invalid | Boot hang with JMicron Generic (197b:2363) device | ||
Description |
After first boot sequence eCS hangs during checkdisk session (see attached screenshot). System boots without problem when using DANIS506 (JMicron Adapter supports also traditional IDE). One HD is running on this controller (WD10EADS), this drive is AHCi-capable. Three other HD's are connected to the Mainboard's SB 700 controller, which is running in IDE mode. A serial debug log is also attached to this ticket. It ends exactly after the third checkdisk should occur. After pressing the reset-button on the machine, the second attached trap000d in OS2BOOT occurs. It does not occure during boot w/o serial debug log. |
|||
#31 | fixed | Disk geometry incompatible with DANIS506 | ||
Description |
When running a WD10EADS on OS2AHCI, disk geometry is not reported properly (see also ticket #29). LVM says:"DISK 1 reports a corrupt partition table". When running the HD via DANIS506 everything works fine. The problem also exists in version 1.29 (different to ticket #30). |