Opened 11 years ago
Closed 11 years ago
#28 closed defect (worksforme)
Machine freezes at eCS Splash screen with OS2AHCI ver. 1.28 or 1.29
| Reported by: | Cyberpastor | Owned by: | |
|---|---|---|---|
| Priority: | Feedback Pending | Milestone: | |
| Component: | driver | Version: | 1.29 |
| Keywords: | Cc: |
Description
Hardware: Asus M5A88-V EVO + AMD quad-core CPU
2 x 500GB SATA drives connected to motherboard ports
2 x SCSI hard disks and one SCSI tape drive attached to LSILogic PCI card
This all works with OS2AHCI ver. 1.25, but with ver. 1.28 or 1.29 there is intermittent disk activity while the eCS splash screen is displayed, then the hd activity LED shows "solid" for quite a while, then nothing: the machine will not continue booting.
Change History (2)
comment:1 by , 11 years ago
| Priority: | major → Feedback Pending |
|---|
comment:2 by , 11 years ago
| Resolution: | → worksforme |
|---|---|
| Status: | new → closed |
No response from reporter.
Note:
See TracTickets
for help on using tickets.
I need to see the startup debug log. Please see http://svn.ecomstation.nl/ahci/wiki/Troubleshooting. Since the system won't boot, a Trap Dump or Serial Debug Log would make sense.
DFSDISK output is not required at this time.