Opened 10 years ago

Closed 10 years ago

Last modified 9 years ago

#173 closed defect (No Change Needed)

Asus M2N-SLI Deluxe and ACPI 3.05

Reported by: guest Owned by: pasha
Priority: major Milestone:
Component: ACPI PSD Version: 3.05
Keywords: Cc:

Description

Alan

Q1:

This all works as long as I use /SMP /APIC /!NOD (The eCS 2.0RC4 installer didn't add the /!NOD). The UpTime? utility now works also, and COPY ACPICA$ <filename> produces a usable file.

The on-board nVidia HD Audio works erratically with UniAUD 1.1.4RC2 (not at all with RC3 or RC4): the sound in YouTube? videos, for example, is sometimes fine, sometimes "choppy," even when playing the same video.

Q2:

When I ran the PCI.EXE program in order to get information that might help track down the audio problem, the final lines of the output contained:

"ROM PCI IRQ routing table Tests.... ROM IRQ routing table found at F000h:DB90h Table Version 1.0 - OK Table size 288 bytes - OK Table Checksum F9h - OK PCI Interrupt Router: Unknown IRQ's dedicated to PCI : 10,11 Error: table entries 6 and 7 refer to the same Bus=255/Device=0! Error: table entries 6 and 8 refer to the same Bus=255/Device=0! Error: table entries 6 and 9 refer to the same Bus=255/Device=0! Error: table entries 7 and 8 refer to the same Bus=255/Device=0! Error: table entries 7 and 9 refer to the same Bus=255/Device=0! Error: table entries 8 and 9 refer to the same Bus=255/Device=0! The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 10,11,14,15 are used by PCI devices Shared IRQs: IRQ 10 is shared by 5 PCI Devices IRQ 11 is shared by 3 PCI Devices"

Are these errors serious? If so, what can be done to solve them?

source: http://forum.ecomstation.ru/viewtopic.php?p=8354&sid=0a92e39dac59ed1b886dc11535ec68bf#8354

Change History (2)

comment:1 Changed 10 years ago by pasha

  • Resolution set to invalid
  • Status changed from new to closed

If you using /!NOD, all question about PCI need send to kernels developer. About uniaud works need send to uniaud support

comment:2 Changed 9 years ago by eco

http://news.ecomstation.nl/article.php?id=1463&group=ecomstation.support.smp#1463

ACPI 3.13 appeared at the betazone today. It seems to work just as well as (but no better than) 3.11 -- 3.12 seems to have been skipped.

My hardware:

Asus M2N-SLI Deluxe (nVidia chipset) with dual-core AMD. ATI X1050 PCIe video (recognized by SNAP as X550). LSILogic PCI-bus U320 SCSI.

I still have to use the /!NOD switch, which I had thought was going to be rendered superfluous soon. On the contrary, the docs. now specify the use of that switch with this combination of motherboard and SCSI card.

Note: See TracTickets for help on using tickets.