Sounds in a loop

[guest]

Wihout /smp /apic all is working fine like it should Dos win and sound works fine With /smp /apic dos and win don't work and sounds gets repeating startup sound With /smp only desktop freeze With /smp /pic desktop freeze

This is with 3.04 in Rc3

[guest]

With /smp /apic

[guest]

This is log from the new acpi with /smp /apic

[eco]

Which sound codec do you have? HDAudio? You can see the model number and name when booting the system, UNIAUD messages. (or use unimix.exe -card)

[guest]

I have a Sb live and use Sanders sounddrivers

Bus 1 (PCI), Device Number 10, Device Function 0 Vendor 1102h Creative Labs Device 0002h EMU10K1 Audio Chipset (SB Live!) Command 0105h (I/O Access, BusMaster?, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,

Medium Timing)

Revision 08h, Header Type 80h, Bus Latency Timer 40h Minimum Bus Grant 02h, Maximum Bus Latency 14h Self test 00h (Self test not supported) PCI Class Multimedia, type Audio Subsystem ID 80271102h CT4832 SBLive! Value Subsystem Vendor 1102h Creative Labs Address 0 is an I/O Port : DC00h..DC1Fh System IRQ 16, INT# A New Capabilities List Present:

Power Management Capability, Version 1.0

Supports low power State D1 Supports low power State D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving)

[guest]

System IRQ 16, INT# A

I'm surprised it works at all for you on IRQ 16. Try remapping 16 to a low IRQ (such as 5) and reserve IRQ 5 in the BIOS so it's not shared. That's what I had to do.

-Mike Forester

[guest]

Hi Mike,

The sound worked fine with 3.03

[guest]

This is with /SMP /!NOD /APIC

[guest]

I try first with the audio load first..... No Sound Then i remmed out the Usb driver .... No Sound Then i remmed out the Nveth driver ..... No sound Then i put back a older Uniaudio32 made by vladest i got sound, but as before keeps repeating the sound :(

[pasha]

For Uniaud better choice acpi.psd /SMP /APIC /TMR

[guest]

I try with /TMR but sounds is still repeating.

[pasha]

Attach acpi.log pls, with psd=acpi.psd /SMP /APIC /TMR

[guest]

with /SMP /APIC /TMR

[guest]

Pci log Booted with /Smp /APIC

[guest]

the also log, but have no sound at all with the drivers from Ecs v2Rc3

[guest]

With the uniaud_hda

[guest]

With the uniaud_hda

[guest]

with the newer uni drivers

[guest]

with the newer uni drivers

[guest]

latest log file with /SMP /ACPI

[eco]

OK, all users have troubles with Sb live..

Let's forward this problem to uniaud team. ACPI works perfectly with other audio adapters in APIC mode.

Info for other users: HDAudio family doesn't work properly in eCS. SBlive doesn't work in SMP APIC mode.

[eco]

OK, now I see that SBlive + ACPI 3.03 works fine.

1) Can you test 3.04?

2) Please download experimental ACPI build from Mensys site:

• Experimental build for you:

acpi31012008.zip

• Read instructions: ​http://ecomstation.ru/projects/acpitools/?action=testcase

[guest]

This is after i restart and sound gets repeating

[eco]

• SBLive, driver (0.81), SMP APIC you can boot but sound plays in loop. To stop the sound loop open the Sound window (Sound object).

[guest]

This is after i start and sound gets repeating

[guest]

With acpi log

[dazarewicz]

Milestone eCS 2.x deleted