AllocIRQMem at 0xFFE88000 (24576 bytes) PSD_install options:" /SMP /!NOD /APIC" @#netlabs dot org:3.4#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Oct 31 2007 19:30:28 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 AcpiOsInitialize ALLOC size 65536 at 0xF96A0000 AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsCreateLock 8 AcpiOsCreateLock 8 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF96A03F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFBA80/0x24 (v2 ACPIAM) ACPI: XSDT @ 0x7FFC0100/0x4C (v1 A M I OEMXSDT 0x8000621 MSFT 0x97) ACPI: FACP @ 0x7FFC0290/0xF4 (v3 A M I OEMFACP 0x8000621 MSFT 0x97) ACPI: DSDT @ 0x7FFC0440/0x501E (v1 A0626 A0626000 0x0 INTL 0x2002026) ACPI: FACS @ 0x7FFCE000/0x40 ACPI: APIC @ 0x7FFC0390/0x70 (v1 A M I OEMAPIC 0x8000621 MSFT 0x97) ACPI: MCFG @ 0x7FFC0400/0x3C (v1 A M I OEMMCFG 0x8000621 MSFT 0x97) ACPI: OEMB @ 0x7FFCE040/0x60 (v1 A M I AMI_OEM 0x8000621 MSFT 0x97) ACPI: SSDT @ 0x7FFC5460/0x248 (v1 A M I POWERNOW 0x1 AMD 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE82440 New:FFCFFFC4 SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 0 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge Table [MCFG] Table [OEMB] Table [SSDT] Size of FACDT 244 Type of computer - Desktop System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0x82E The value to write to SMI_CMD to disable SMI 0xE1 The value to write to SMI_CMD to re-enable SMI 0x1E The value to write to SMI_CMD to enter the S4BIOS state 0x0 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE2 System port address of the PM1a Event Register Block 500 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 504 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 508 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 520 System port address of General-Purpose Event 1 Register Block 8A0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x10 Offset within the ACPI general-purpose event model where GPE1 based events start 20 GPE enable register: 0: 0: 2: 0 GPE status register: 44: 0: 0: 0 The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xE3 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 125 The RTC CMOS RAM index to the month of year alarm value 126 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x3 Fixed feature flags A5 The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 3321 The value to write to the RESET_REG port to reset the system 6 ***** Throttl Width 0 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler F96E0F69 ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[PIMC],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0 ************ Scan EC Status = 0 ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU1] Processor [CPU2] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 Current IRQs line 24 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:2 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x510 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:2 Counter:1 CPU id to N:1 ProcId: 0x2 P_BLK: 0x0 P_BLK len: 0x0 CPU1 Status Evaluate _PCT 0x0 AE_OK Perf control: 0x0 Perf status: 0x0 CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:148888 unuse:2592 count:2784 ** Get GpeHdl Status = 0 - AE_OK PSDFree: at 0xF96B0000 success! Event [_L10] Install GPE0x10 Status 0x0 Event [_L0D] Install GPE0xD Status 0x0 Event [_L05] Install GPE0x5 Status 0x0 Event [_L00] Install GPE0x0 Status 0x0 Event [_L15] Install GPE0x15 Status 0x0 Event [_L11] Install GPE0x11 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 Event [_L09] Install GPE0x9 Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F9695478 in arg F9695478 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:520 Enable:524 EnableWake:21 EnableRun:0 BaseGPENumber:0 GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:521 Enable:525 EnableWake:2A EnableRun:0 BaseGPENumber:8 GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE2 Status:522 Enable:526 EnableWake:23 EnableRun:0 BaseGPENumber:10 GPE3 Status:523 Enable:527 EnableWake:0 EnableRun:0 BaseGPENumber:18 ===== Info ======== Int Level 9 In Xrupt F9695478 in arg F96956E8 Node Name [_GPE] Flags: 0 Reg count 8 GPE0 Status:8A0 Enable:8A8 EnableWake:0 EnableRun:0 BaseGPENumber:20 GPE1 Status:8A1 Enable:8A9 EnableWake:0 EnableRun:0 BaseGPENumber:28 GPE2 Status:8A2 Enable:8AA EnableWake:0 EnableRun:0 BaseGPENumber:30 GPE3 Status:8A3 Enable:8AB EnableWake:0 EnableRun:0 BaseGPENumber:38 GPE4 Status:8A4 Enable:8AC EnableWake:0 EnableRun:0 BaseGPENumber:40 GPE5 Status:8A5 Enable:8AD EnableWake:0 EnableRun:0 BaseGPENumber:48 GPE6 Status:8A6 Enable:8AE EnableWake:0 EnableRun:0 BaseGPENumber:50 GPE7 Status:8A7 Enable:8AF EnableWake:0 EnableRun:0 BaseGPENumber:58 =========== Status 0x0 0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** System Notify *** Dev: [PWRB] Value:2 ************ Leave Sleep Status = 0x5 - AE_NOT_FOUND APM: PSD find success. PSD Ftable:F9C001C0 Register Notify 1st FFCF518E FindPCIDevice FindPCIDevice FindPCIDevice ******** Event tread *************** APM: Setting suspend state:1