acpibattery.exe utility should only show existing battery(s)

[yoda]

Currently, ACPIBATTERY.EXE shows 2 batteries here - even only 1 exists.
This is very annoying, as info from 1'st battery scrolls out of screen,
and leves only bogus info from non-existing battery on screen.

It would be nice if app could either auto-detect how many batteries really is
in use, or if we could get a parameter like /1 added - which should force app
to only show first battery. (Maybe a /2 which would only show 2'nd battery
could be useful to somebody too).

[pasha]

Try "AcpiBattery s"

[yoda]

Acpibattery s works fine - only shows 1'st (and only) battery :-)

[yoda]

Replying to pasha:

Try "AcpiBattery s"

Here is output from acpibattery s : J:\OS2\ACPI\util>AcpiBattery.exe s Show ACPI battery state Found Smart Battery "BAT1" Battery status 0x1f =========== Battery design =============== Power Unit: capacity is mA , charge/discharge rate is mA 1 Design capacity 4800 mA 1 Last full charge capacity 4698 mA 1 Battery technology 1 1 Design voltage 14800 mV 1 Design capacity of warning 300 mA 1 Design capacity of low 187 mA 1 Baterry granularity between low and warning 32 mA 1 Baterry granularity between warning and high 32 mAh 2 ModelNumber: "ZB01" 4 bytes "5a423031" 3 SerialNumber: "166" 9 bytes 31 2 Battery type: "LION"4 bytes 2 OEM info: "11 " 10 =========== Battery Status =============== 1 Battery present rate 0 1 Battery remaining capacity 4698 1 Battery present voltage 0 mV Remaining Battery Percentage: 100 Found Smart Battery "BAT2" Battery status 0xf Status 0x0 0 - No error

[eco]

user confirmed that the AcpiBattery.exe works fine now. the ticket is closed.