Custom Query (581 matches)

Notebook Acer TravelMate? 4672LMI i945 chipset 2GB RAM. While previous ACPI driver up to around 3.19.10 were able to boot this notebook, the latest drivers Traps during load of ACPI.PSD

Here is Trap info:

Slot Pid Ppid Csid Ord Sta Pri pTSD pPTDA pTCB Disp SG Name

*0001# 0001 0000 0000 0001 run 0200 ffde0000 ffde1898 ffde1594 0f36 00 OS2BOOT eax=00009b95 ebx=ffde1594 ecx=ffde1898 edx=ffdbc747 esi=ffde1600 edi=fe7ed80c eip=00007d74 esp=0000c000 ebp=00007ffa iopl=0 -- -- -- nv up di pl nz na po nc cs=2a48 ss=1530 ds=0160 es=0160 fs=0000 gs=0000 cr2=00000000 cr3=00211000 p=00 2a48:00007d74 e90e03 jmp 8085 # Loading version data ... please wait Loading structure info for WSeB/ACP SMP ... please wait. ....Structure definition file (warp45_s\kernel.sdf) loaded. ....Structure definition file (warp45_s\shell.sdf) loaded. Done. #

TRAP SCREEN INFORMATION

OS/2 Kernel Revision 14.104a_SMP Exception in module:

TRAP 0002 ERRCD=0001 ERACC= ERLIM= CPU=01

EAX=0000000b EBX=f96b0db1 ECX=00200282 EDX=00005fb9 ESI=00000000 EDI=fd380000 EBP=ffe88fd4 FLG=00200282 CS:EIP=0168:f96b58c5 CSACC=c09b CSLIM=ffffffff SS:ESP=1520:ffe88f94 SSACC=c097 SSLIM=ff7fffff DS=0160 DSACC=c0f3 DSLIM=ffffffff CR0=8001001b ES=0160 ESACC=c0f3 ESLIM=ffffffff CR2=ffd02000 FS=0108 FSACC=0093 FSLIM=000085bf GS=0000 GSACC= GSLIM= %f96b586d ACPI PrintInterruptState? + 58 Syspem dump (2GB) available on request.

Serial log attached.

Installed it over my 3.19.15 version. After reboot, the version number at boot up still showed 3.19.15. My config.sys entry of the old powerman was still there. I opened warpin and deinstalled the whole ACPI-package. I then ran the acpi-warpin again and checked the files, turned out that some were new and some old. Although I had chosen "unlock all" this apparently didn't work. I used wpiview to extract the files from the 3.20.01 package and manully exchanged every relevant file to be the one from that package. (I had to manually REM the old powerman entry in config.sys). Rebooted and the version number was correct and everything seemed to work fine. However power reduction worked bad. Temperature just going down very slow and not lower than 76C (normal is 62C). Also Resume didn't work.

I have converted back to 3.19.14, which works well together with standalone powerman.

Installed it over my 3.19.15 version. After reboot, the version number at boot up still showed 3.19.15. My config.sys entry of the old powerman was still there. I opened warpin and deinstalled the whole ACPI-package. I then ran the acpi-warpin again and checked the files, turned out that some were new and some old. Although I had chosen "unlock all" this apparently didn't work. I used wpiview to extract the files from the 3.20.01 package and manully exchanged every relevant file to be the one from that package. (I had to manually REM the old powerman entry in config.sys). Rebooted and the version number was correct and everything seemed to work fine. However power reduction worked bad. Temperature just going down very slow and not lower than 76C (normal is 62C). Also Resume didn't work.

I have converted back to 3.19.14, which works well together with standalone powerman.