Opened 8 years ago

Closed 8 years ago

#538 closed defect (duplicate)

Several problems with ACPI 3.20.01

Reported by: melf Owned by: David Azarewicz
Priority: major Milestone: Release 4.00
Component: ACPI PSD Version: 3.20.01
Keywords: Cc:


Installed it over my 3.19.15 version. After reboot, the version number at boot up still showed 3.19.15. My config.sys entry of the old powerman was still there. I opened warpin and deinstalled the whole ACPI-package. I then ran the acpi-warpin again and checked the files, turned out that some were new and some old. Although I had chosen "unlock all" this apparently didn't work. I used wpiview to extract the files from the 3.20.01 package and manully exchanged every relevant file to be the one from that package. (I had to manually REM the old powerman entry in config.sys). Rebooted and the version number was correct and everything seemed to work fine. However power reduction worked bad. Temperature just going down very slow and not lower than 76C (normal is 62C). Also Resume didn't work.

I have converted back to 3.19.14, which works well together with standalone powerman.

Change History (1)

comment:1 Changed 8 years ago by melf

Resolution: duplicate
Status: newclosed
Note: See TracTickets for help on using tickets.