Ticket #332: acpi_corrected.log

File acpi_corrected.log, 11.4 KB (added by dgbisse, 16 years ago)
Line 
1KEE Version 0x10000
2
3PSD_install options:" /SMP /PIC" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xF96D0000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
8AcpiOsCreateLock F9C171A0
9AcpiOsCreateLock F9C1CB64
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsPredefinedOverride: "_OSI"
15*** AcpiInitializeSubsystem Status = 0 ***
16ACPI: RSDP @ 0xFB530/0x24 (v2 ACPIAM)
17ACPI: XSDT @ 0x7BF80100/0x54 (v1 122608 XSDT1458 0x20081226 MSFT 0x97)
18ACPI: FACP @ 0x7BF80290/0xF4 (v3 122608 FACP1458 0x20081226 MSFT 0x97)
19ACPI: DSDT @ 0x7BF805C0/0xA337 (v1 A1044 A1044001 0x1 INTL 0x20051117)
20ACPI: FACS @ 0x7BF8E000/0x40
21ACPI: APIC @ 0x7BF80390/0x6C (v1 122608 APIC1458 0x20081226 MSFT 0x97)
22ACPI: MCFG @ 0x7BF80400/0x3C (v1 122608 OEMMCFG 0x20081226 MSFT 0x97)
23ACPI: OEMB @ 0x7BF8E040/0x71 (v1 122608 OEMB1458 0x20081226 MSFT 0x97)
24ACPI: HPET @ 0x7BF8A900/0x38 (v1 122608 OEMHPET 0x20081226 MSFT 0x97)
25ACPI: SSDT @ 0x7BF8A940/0x3FC (v1 A M I POWERNOW 0x1 AMD 0x1)
26*** AcpiInitializeTables Status = 0 ***
27AcpiOsTableOverride Ex:FFCD55C0 New:FFCFFFBC SIG:[DSDT]
28*** AcpiLoadTables Status = 0 ***
29Table [DSDT]
30Table [FACS]
31Table [FACP]
32Table [APIC]
33Local APIC address: FEE00000h
34System also has 8259
35APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
36APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
37APIC_PROCESSOR: ProcID 3h LocalApicID 2h - usable
38APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable
39APIC_IO: IO ApicID 3h addr FEC00000h INTI 0
40APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
41APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level
42Table [MCFG]
43Table [OEMB]
44Table [HPET]
45Table [SSDT]
46Size of FACDT 244
47Type of computer - Desktop
48System vector the SCI interrupt is wired to in 8259 mode. 9
49System port address of the SMI Command Port 0xB0
50The value to write to SMI_CMD to disable SMI 0xE1
51The value to write to SMI_CMD to re-enable SMI 0x1E
52The value to write to SMI_CMD to enter the S4BIOS state 0x0
53The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE2
54System port address of the PM1a Event Register Block 800
55System port address of the PM1b Event Register Block 0
56Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
57System port address of the PM1a Control Register Block 804
58System port address of the PM1b Control Register Block 0
59Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
60System port address of the PM2 Control Register Block 8FF
61Number of bytes decoded by PM2_CNT_BLK 1
62System port address of the Power Management Timer Control Register Block 808
63Number of bytes decoded by PM_TMR_BLK (=4) 4
64System port address of General-Purpose Event 0 Register Block 820
65System port address of General-Purpose Event 1 Register Block 0
66Number of bytes decoded by GPE0_BLK 0x8
67Number of bytes decoded by GPE1_BLK 0x0
68Offset within the ACPI general-purpose event model where GPE1 based events start 0
69GPE enable register: 0: 0: 0: 0
70GPE status register: 0: 1: 0: 40
71The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xE3
72The system does not support a C2 state. 65
73The system does not support a C3 state 3E9
74The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
75The bit width of the processor's duty cycle setting value in the P_CNT register 3
76The RTC CMOS RAM index to the day-of-month alarm value 13
77The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
78IA-PC Boot Architecture Flags 0x3
79Fixed feature flags 1A5
80The reset register:
81Type of address space - System I/O
82Register Bit Width 8
83Register Bit Offset 0
84Access size 0
85Address 3321
86The value to write to the RESET_REG port to reset the system 6
87***** Throttl Width 3 Offset 1
88AcpiOsInstallIntterrupHandler IRQ9 handler F9703CDB
89** AcpiEnableSubsystem Status = 0
90AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
91** Scan EC Status = 0
92** AcpiInitializeObjects mask:0 Status = 0
93Processor [P001]
94Processor [P002]
95Processor [P003]
96Processor [P004]
97Status 0x0 0
98Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
99Status Evaluate Processor 0x0 AE_OK
100Status C 0x0 AE_OK
101Usable:3 Counter:0
102 CPU id to N:0
103 ProcId: 0x1
104 P_BLK: 0x810
105 P_BLK len: 0x6
106CPU0 Status Evaluate _PCT 0x0 AE_OK
107 Perf control: 0xC0010062
108 Perf status: 0x0
109CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
110Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
111Status Evaluate Processor 0x0 AE_OK
112Status C 0x0 AE_OK
113Usable:3 Counter:1
114 CPU id to N:1
115 ProcId: 0x2
116 P_BLK: 0x0
117 P_BLK len: 0x0
118CPU1 Status Evaluate _PCT 0x0 AE_OK
119 Perf control: 0xC0010062
120 Perf status: 0x0
121CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
122Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
123Status Evaluate Processor 0x0 AE_OK
124Status C 0x0 AE_OK
125Usable:3 Counter:2
126 CPU id to N:2
127 ProcId: 0x3
128 P_BLK: 0x0
129 P_BLK len: 0x0
130CPU2 Status Evaluate _PCT 0x0 AE_OK
131 Perf control: 0xC0010062
132 Perf status: 0x0
133CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND
134Found bridge "PCI0" Addr:0x180000 BBN is 0 Dev:0x18 Fun:0x0
135PSDFree: at 0xF9C00000 success!
136Finding:1 bridges
1370:0.0 Class:600 Hdr:0 Bridge H->0
1380:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1390:5.0 Class:604 Hdr:1 Bridge 0->2 Bridge
1400:6.0 Class:604 Hdr:1 Bridge 0->3 Bridge
1410:17.0 Class:101 Hdr:0
1420:18.0 Class:C03 Hdr:80
1430:18.1 Class:C03 Hdr:0
1440:18.2 Class:C03 Hdr:0
1450:19.0 Class:C03 Hdr:80
1460:19.1 Class:C03 Hdr:0
1470:19.2 Class:C03 Hdr:0
1480:20.0 Class:C05 Hdr:80
1490:20.1 Class:101 Hdr:0
1500:20.2 Class:403 Hdr:0
1510:20.3 Class:601 Hdr:80
1520:20.4 Class:604 Hdr:81 Bridge 0->4 Bridge
1530:20.5 Class:C03 Hdr:0
1540:24.0 Class:600 Hdr:80 Bridge H->0
1550:24.1 Class:600 Hdr:80 Bridge H->0
1560:24.2 Class:600 Hdr:80 Bridge H->0
1570:24.3 Class:600 Hdr:80 Bridge H->0
1580:24.4 Class:600 Hdr:80 Bridge H->0
1591:5.0 Class:300 Hdr:80
1601:5.1 Class:403 Hdr:80
1612:0.0 Class:C00 Hdr:0
1623:0.0 Class:200 Hdr:0
1634:7.0 Class:100 Hdr:0
164PCI Bus scan: 5 PCI buses found.
165Scan ACPI tree for PCI functions
1660:24.0 'PCI0' (F96D4D40)
1670:0.0 'RS78' (F96D5078)
1680:1.0 'P0P1' (F96D5450)
1690:2.0 'PCE2' (F96D5500)
1700:3.0 'PCE3' (F96D5610)
1710:4.0 'PCE4' (F96D5720)
1720:5.0 'PCE5' (F96D5830)
1730:6.0 'PCE6' (F96D5940)
1743:0.0 'RLAN' (F96D5A50)
1750:7.0 'PCE7' (F96D5B00)
1760:9.0 'PCE9' (F96D5BB0)
1770:10.0 'PCEA' (F96D5C60)
1780:11.0 'PCEB' (F96D5D10)
1790:12.0 'PCEC' (F96D5DC0)
1800:20.1 'IDEC' (F96D5E70)
1810:20.2 'SBAZ' (F96D6908)
1820:20.3 'SBRG' (F96D6AC8)
1830:20.4 'P0PC' (F96D9C48)
1840:18.0 'UHC1' (F96D9D90)
1850:18.1 'UHC2' (F96D9E40)
1860:18.2 'UHC3' (F96D9EF0)
1870:19.0 'USB4' (F96D9FA0)
1880:19.1 'UHC5' (F96DA050)
1890:19.2 'UHC6' (F96DA100)
1900:20.5 'UHC7' (F96DA1B0)
1910:17.0 'SATA' (F96DA260)
1920:20.0 'SMBS' (F96DB270)
193Bridges found:
1940:24.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96D4D40) _PRT
1950:1.0 class:604 type: 1 Bus 0->1 ACPI: 'P0P1' (F96D5450) _PRT
1960:5.0 class:604 type: 1 Bus 0->2 ACPI: 'PCE5' (F96D5830) _PRT
1970:6.0 class:604 type: 1 Bus 0->3 ACPI: 'PCE6' (F96D5940) _PRT
1980:20.4 class:604 type: 1 Bus 0->4 ACPI: 'P0PC' (F96D9C48) _PRT
199IRQLinks found:
2000: 'LNKC' (F96DD110) P[ 4, 7, 10,*11, 12, 14, 15] <- 3:0.0 1:5.0 0:20.5 0:19.1 0:19.0
201 A[]
2021: 'LNKD' (F96DD368) P[ 4, 7, 10,*11, 12, 14, 15] <- 1:5.1 0:19.2
203 A[]
2042: 'LNKA' (F96DCC60) P[ 4, 7,*10, 11, 12, 14, 15] <- 0:20.2 0:20.1 0:18.1 0:18.0
205 A[]
2063: 'LNKB' (F96DCEB8) P[ 4, 7,*10, 11, 12, 14, 15] <- 2:0.0 0:18.2
207 A[]
2084: 'LNKG' (F96DDA70) P[ 4,*10, 11, 12, 14, 15] <- 0:17.0
209 A[]
2105: 'LNKE' (F96DD5C0) P[]
211 A[]
2126: 'LNKF' (F96DD818) P[ 4, 7,*10, 11, 12, 14, 15] <- 4:7.0
213 A[]
2147: 'LNKH' (F96DDCC8) P[]
215 A[]
216PCI devices found:
2170:0.0 1022:9600 'RS78'
2180:1.0 1043:9602 'P0P1'
2190:5.0 1022:9605 'PCE5'
2200:6.0 1022:9606 'PCE6'
2210:17.0 1002:4390 'SATA' IRQs: PCI:10 PIC:'LNKG':10 APIC:22
2220:18.0 1002:4397 'UHC1' IRQs: PCI:10 PIC:'LNKA':10 APIC:16
2230:18.1 1002:4398 'UHC2' IRQs: PCI:10 PIC:'LNKA':10 APIC:16
2240:18.2 1002:4396 'UHC3' IRQs: PCI:10 PIC:'LNKB':10 APIC:17
2250:19.0 1002:4397 'USB4' IRQs: PCI:11 PIC:'LNKC':11 APIC:18
2260:19.1 1002:4398 'UHC5' IRQs: PCI:11 PIC:'LNKC':11 APIC:18
2270:19.2 1002:4396 'UHC6' IRQs: PCI:11 PIC:'LNKD':11 APIC:19
2280:20.0 1002:4385 'SMBS'
2290:20.1 1002:439C 'IDEC' IRQs: PCI:0 PIC:'LNKA':10 APIC:16 MSI
2300:20.2 1002:4383 'SBAZ' IRQs: PCI:10 PIC:'LNKA':10 APIC:16
2310:20.3 1002:439D 'SBRG'
2320:20.4 1002:4384 'P0PC'
2330:20.5 1002:4399 'UHC7' IRQs: PCI:11 PIC:'LNKC':11 APIC:18
2340:24.0 1022:1200 'PCI0'
2350:24.1 1022:1201
2360:24.2 1022:1202
2370:24.3 1022:1203
2380:24.4 1022:1204
2391:5.0 1002:9610 IRQs: PCI:11 PIC:'LNKC':11 APIC:18 MSI
2401:5.1 1002:960F IRQs: PCI:11 PIC:'LNKD':11 APIC:19 MSI
2412:0.0 197B:2380 IRQs: PCI:10 PIC:'LNKB':10 APIC:17 MSI
2423:0.0 10EC:8168 'RLAN' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 MSI
2434:7.0 1000:F IRQs: PCI:10 PIC:'LNKF':10 APIC:21
244Bus detected - 4
245** AcpiInstall Power Device Status = 0
246ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
247ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
248** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
249** AcpiInstall PMTimer Device Status = 0
250** Total use:259664 unuse:8088 count:4522 **
251Get GpeHdl Status = 0 - AE_OK
252Event [_L09]
253Install GPE0x9 Status 0x0
254Event [_L18]
255Install GPE0x18 Status 0x0
256Event [_L04]
257Install GPE0x4 Status 0x0
258Event [_L1B]
259Install GPE0x1B Status 0x0
260Event [_L03]
261Install GPE0x3 Status 0x0
262Event [_L10]
263Install GPE0x10 Status 0x0
264Event [_L0B]
265Install GPE0xB Status 0x0
266EndScan GPE Status 0
267===== Info ========
268Int Level 9
269In Xrupt F96CDD58 in arg F96CDD58
270 Node
271Name [_GPE]
272Flags: 0
273Reg count 4
274GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
275GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
276GPE0 Status:820 Enable:824 EnableWake:18 EnableRun:0 BaseGPENumber:0
277GPE0x9 Flag:0x4 Status - Set 0x0 Enable 0x0
278GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
279GPE1 Status:821 Enable:825 EnableWake:8 EnableRun:2 BaseGPENumber:8
280GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
281GPE2 Status:822 Enable:826 EnableWake:1 EnableRun:0 BaseGPENumber:10
282GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
283GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0
284GPE3 Status:823 Enable:827 EnableWake:9 EnableRun:0 BaseGPENumber:18
285=========== Status 0x0 0
286FindPCIDevice
287 Need: B:0 D:11 F:0
288Finding APIC0 PIC10 Dev: [SATA]
289FindPCIDevice
290 Need: B:0 D:14 F:1
291Finding APIC0 PIC10 Dev: [IDEC]
292APM: PSD find success. PSD Ftable:F9C1017C
293APM:Max C state 0
294Register Notify 1st FFCB628D
295Uniaud32: PSD find success. PSD Ftable:F9C1017C
296FindPCIDevice
297 Need: B:0 D:14 F:0
298******** Event tread ***************
299AllocateSuspendMemory s_cpu:0
300Alloc s_cpu OK CPU0 2304 bytes at 0
301AllocSuspend: CPU0 CR3:211000
302AllocSuspend: CPU1 CR3:F0A000
303AllocSuspend: CPU2 CR3:F01000
304Status 1Mb alloc 0
305APM: Setting suspend state:1