KEE Version 0x10000 PSD_install options:" /SMP /PIC" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 AcpiOsInitialize ALLOC size 65536 at 0xF96D0000 AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsCreateLock F9C171A0 AcpiOsCreateLock F9C1CB64 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsPredefinedOverride: "_OSI" *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFB530/0x24 (v2 ACPIAM) ACPI: XSDT @ 0x7BF80100/0x54 (v1 122608 XSDT1458 0x20081226 MSFT 0x97) ACPI: FACP @ 0x7BF80290/0xF4 (v3 122608 FACP1458 0x20081226 MSFT 0x97) ACPI: DSDT @ 0x7BF805C0/0xA337 (v1 A1044 A1044001 0x1 INTL 0x20051117) ACPI: FACS @ 0x7BF8E000/0x40 ACPI: APIC @ 0x7BF80390/0x6C (v1 122608 APIC1458 0x20081226 MSFT 0x97) ACPI: MCFG @ 0x7BF80400/0x3C (v1 122608 OEMMCFG 0x20081226 MSFT 0x97) ACPI: OEMB @ 0x7BF8E040/0x71 (v1 122608 OEMB1458 0x20081226 MSFT 0x97) ACPI: HPET @ 0x7BF8A900/0x38 (v1 122608 OEMHPET 0x20081226 MSFT 0x97) ACPI: SSDT @ 0x7BF8A940/0x3FC (v1 A M I POWERNOW 0x1 AMD 0x1) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFCD55C0 New:FFCFFFBC SIG:[DSDT] *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_PROCESSOR: ProcID 3h LocalApicID 2h - usable APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable APIC_IO: IO ApicID 3h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level Table [MCFG] Table [OEMB] Table [HPET] Table [SSDT] Size of FACDT 244 Type of computer - Desktop System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB0 The value to write to SMI_CMD to disable SMI 0xE1 The value to write to SMI_CMD to re-enable SMI 0x1E The value to write to SMI_CMD to enter the S4BIOS state 0x0 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE2 System port address of the PM1a Event Register Block 800 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 804 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 8FF Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 808 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 820 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0 GPE status register: 0: 1: 0: 40 The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xE3 The system does not support a C2 state. 65 The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x3 Fixed feature flags 1A5 The reset register: Type of address space - System I/O Register Bit Width 8 Register Bit Offset 0 Access size 0 Address 3321 The value to write to the RESET_REG port to reset the system 6 ***** Throttl Width 3 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler F9703CDB ** AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 ** Scan EC Status = 0 ** AcpiInitializeObjects mask:0 Status = 0 Processor [P001] Processor [P002] Processor [P003] Processor [P004] Status 0x0 0 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:3 Counter:0 CPU id to N:0 ProcId: 0x1 P_BLK: 0x810 P_BLK len: 0x6 CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xC0010062 Perf status: 0x0 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:3 Counter:1 CPU id to N:1 ProcId: 0x2 P_BLK: 0x0 P_BLK len: 0x0 CPU1 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xC0010062 Perf status: 0x0 CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Status C 0x0 AE_OK Usable:3 Counter:2 CPU id to N:2 ProcId: 0x3 P_BLK: 0x0 P_BLK len: 0x0 CPU2 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xC0010062 Perf status: 0x0 CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND Found bridge "PCI0" Addr:0x180000 BBN is 0 Dev:0x18 Fun:0x0 PSDFree: at 0xF9C00000 success! Finding:1 bridges 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 0:5.0 Class:604 Hdr:1 Bridge 0->2 Bridge 0:6.0 Class:604 Hdr:1 Bridge 0->3 Bridge 0:17.0 Class:101 Hdr:0 0:18.0 Class:C03 Hdr:80 0:18.1 Class:C03 Hdr:0 0:18.2 Class:C03 Hdr:0 0:19.0 Class:C03 Hdr:80 0:19.1 Class:C03 Hdr:0 0:19.2 Class:C03 Hdr:0 0:20.0 Class:C05 Hdr:80 0:20.1 Class:101 Hdr:0 0:20.2 Class:403 Hdr:0 0:20.3 Class:601 Hdr:80 0:20.4 Class:604 Hdr:81 Bridge 0->4 Bridge 0:20.5 Class:C03 Hdr:0 0:24.0 Class:600 Hdr:80 Bridge H->0 0:24.1 Class:600 Hdr:80 Bridge H->0 0:24.2 Class:600 Hdr:80 Bridge H->0 0:24.3 Class:600 Hdr:80 Bridge H->0 0:24.4 Class:600 Hdr:80 Bridge H->0 1:5.0 Class:300 Hdr:80 1:5.1 Class:403 Hdr:80 2:0.0 Class:C00 Hdr:0 3:0.0 Class:200 Hdr:0 4:7.0 Class:100 Hdr:0 PCI Bus scan: 5 PCI buses found. Scan ACPI tree for PCI functions 0:24.0 'PCI0' (F96D4D40) 0:0.0 'RS78' (F96D5078) 0:1.0 'P0P1' (F96D5450) 0:2.0 'PCE2' (F96D5500) 0:3.0 'PCE3' (F96D5610) 0:4.0 'PCE4' (F96D5720) 0:5.0 'PCE5' (F96D5830) 0:6.0 'PCE6' (F96D5940) 3:0.0 'RLAN' (F96D5A50) 0:7.0 'PCE7' (F96D5B00) 0:9.0 'PCE9' (F96D5BB0) 0:10.0 'PCEA' (F96D5C60) 0:11.0 'PCEB' (F96D5D10) 0:12.0 'PCEC' (F96D5DC0) 0:20.1 'IDEC' (F96D5E70) 0:20.2 'SBAZ' (F96D6908) 0:20.3 'SBRG' (F96D6AC8) 0:20.4 'P0PC' (F96D9C48) 0:18.0 'UHC1' (F96D9D90) 0:18.1 'UHC2' (F96D9E40) 0:18.2 'UHC3' (F96D9EF0) 0:19.0 'USB4' (F96D9FA0) 0:19.1 'UHC5' (F96DA050) 0:19.2 'UHC6' (F96DA100) 0:20.5 'UHC7' (F96DA1B0) 0:17.0 'SATA' (F96DA260) 0:20.0 'SMBS' (F96DB270) Bridges found: 0:24.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96D4D40) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'P0P1' (F96D5450) _PRT 0:5.0 class:604 type: 1 Bus 0->2 ACPI: 'PCE5' (F96D5830) _PRT 0:6.0 class:604 type: 1 Bus 0->3 ACPI: 'PCE6' (F96D5940) _PRT 0:20.4 class:604 type: 1 Bus 0->4 ACPI: 'P0PC' (F96D9C48) _PRT IRQLinks found: 0: 'LNKC' (F96DD110) P[ 4, 7, 10,*11, 12, 14, 15] <- 3:0.0 1:5.0 0:20.5 0:19.1 0:19.0 A[] 1: 'LNKD' (F96DD368) P[ 4, 7, 10,*11, 12, 14, 15] <- 1:5.1 0:19.2 A[] 2: 'LNKA' (F96DCC60) P[ 4, 7,*10, 11, 12, 14, 15] <- 0:20.2 0:20.1 0:18.1 0:18.0 A[] 3: 'LNKB' (F96DCEB8) P[ 4, 7,*10, 11, 12, 14, 15] <- 2:0.0 0:18.2 A[] 4: 'LNKG' (F96DDA70) P[ 4,*10, 11, 12, 14, 15] <- 0:17.0 A[] 5: 'LNKE' (F96DD5C0) P[] A[] 6: 'LNKF' (F96DD818) P[ 4, 7,*10, 11, 12, 14, 15] <- 4:7.0 A[] 7: 'LNKH' (F96DDCC8) P[] A[] PCI devices found: 0:0.0 1022:9600 'RS78' 0:1.0 1043:9602 'P0P1' 0:5.0 1022:9605 'PCE5' 0:6.0 1022:9606 'PCE6' 0:17.0 1002:4390 'SATA' IRQs: PCI:10 PIC:'LNKG':10 APIC:22 0:18.0 1002:4397 'UHC1' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 0:18.1 1002:4398 'UHC2' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 0:18.2 1002:4396 'UHC3' IRQs: PCI:10 PIC:'LNKB':10 APIC:17 0:19.0 1002:4397 'USB4' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 0:19.1 1002:4398 'UHC5' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 0:19.2 1002:4396 'UHC6' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 0:20.0 1002:4385 'SMBS' 0:20.1 1002:439C 'IDEC' IRQs: PCI:0 PIC:'LNKA':10 APIC:16 MSI 0:20.2 1002:4383 'SBAZ' IRQs: PCI:10 PIC:'LNKA':10 APIC:16 0:20.3 1002:439D 'SBRG' 0:20.4 1002:4384 'P0PC' 0:20.5 1002:4399 'UHC7' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 0:24.0 1022:1200 'PCI0' 0:24.1 1022:1201 0:24.2 1022:1202 0:24.3 1022:1203 0:24.4 1022:1204 1:5.0 1002:9610 IRQs: PCI:11 PIC:'LNKC':11 APIC:18 MSI 1:5.1 1002:960F IRQs: PCI:11 PIC:'LNKD':11 APIC:19 MSI 2:0.0 197B:2380 IRQs: PCI:10 PIC:'LNKB':10 APIC:17 MSI 3:0.0 10EC:8168 'RLAN' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 MSI 4:7.0 1000:F IRQs: PCI:10 PIC:'LNKF':10 APIC:21 Bus detected - 4 ** AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE ** AcpiInstall PMTimer Device Status = 0 ** Total use:259664 unuse:8088 count:4522 ** Get GpeHdl Status = 0 - AE_OK Event [_L09] Install GPE0x9 Status 0x0 Event [_L18] Install GPE0x18 Status 0x0 Event [_L04] Install GPE0x4 Status 0x0 Event [_L1B] Install GPE0x1B Status 0x0 Event [_L03] Install GPE0x3 Status 0x0 Event [_L10] Install GPE0x10 Status 0x0 Event [_L0B] Install GPE0xB Status 0x0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F96CDD58 in arg F96CDD58 Node Name [_GPE] Flags: 0 Reg count 4 GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0 Status:820 Enable:824 EnableWake:18 EnableRun:0 BaseGPENumber:0 GPE0x9 Flag:0x4 Status - Set 0x0 Enable 0x0 GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 GPE1 Status:821 Enable:825 EnableWake:8 EnableRun:2 BaseGPENumber:8 GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE2 Status:822 Enable:826 EnableWake:1 EnableRun:0 BaseGPENumber:10 GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 GPE3 Status:823 Enable:827 EnableWake:9 EnableRun:0 BaseGPENumber:18 =========== Status 0x0 0 FindPCIDevice Need: B:0 D:11 F:0 Finding APIC0 PIC10 Dev: [SATA] FindPCIDevice Need: B:0 D:14 F:1 Finding APIC0 PIC10 Dev: [IDEC] APM: PSD find success. PSD Ftable:F9C1017C APM:Max C state 0 Register Notify 1st FFCB628D Uniaud32: PSD find success. PSD Ftable:F9C1017C FindPCIDevice Need: B:0 D:14 F:0 ******** Event tread *************** AllocateSuspendMemory s_cpu:0 Alloc s_cpu OK CPU0 2304 bytes at 0 AllocSuspend: CPU0 CR3:211000 AllocSuspend: CPU1 CR3:F0A000 AllocSuspend: CPU2 CR3:F01000 Status 1Mb alloc 0 APM: Setting suspend state:1