not sound

[msv]

add message Elitegroup Computer 915-M5GL

Bus 0 (PCI Express), Device Number 27, Device Function 0 Vendor 8086h Intel Corporation Device 2668h 82801FB ICH6 High Definition Audio Controller Command 0006h (Memory Access, BusMaster) Status 0010h (Has Capabilities List, Fast Timing) Revision 05h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Multimedia, type Unknown! Subsystem ID 1B921019h Unknown Subsystem Vendor 1019h Elitegroup Computer Sys Address 0 is a Memory Address (64-bit) : FEA38000h System IRQ 10, INT# A New Capabilities List Present:

Power Management Capability, Version 1.1

Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 55 mA Current Power State : D0 (Device operational, no power saving)

Message Signalled Interrupt Capability

MSI is disabled MSI function can generate 64-bit addresses

PCI Express Capability, Version 1

Device/Port Type :

Root Complex Integrated Endpoint Device Unsupported Request Severity is Non-Fatal

Device Status :

AUX Power Detected

Link Capabilities :

Maximum Link speed : Unknown (00h)!! Maximum Link Width : xReserved Link Port Number : 0

Link Control :

Asynchronous Clocking in Use

Link Status :

Current Link speed : Unknown (00)!! Current Link Width : x0

---

IRQ Summary: IRQs 3,5,10,11,14,15 are used by PCI devices Shared IRQs: IRQ 5 is shared by 2 PCI Devices

IRQ 10 is shared by 4 PCI Devices IRQ 11 is shared by 2 PCI Devices

[Yoda]

Need Uniinfo logs from a current version to be able to help. Reopen ticket, when you can provide that.