Opened 13 years ago
Closed 13 years ago
#22 closed defect (fixed)
No Network with R8169 0.0.3
| Reported by: | David McKenna | Owned by: | David Azarewicz |
|---|---|---|---|
| Priority: | major | Component: | r8169 |
| Version: | 0.0.4 | Keywords: | |
| Cc: |
Description
I have an MSI H55M-E33 motherboard with Realtek RTL8111DL chip on board running eCS 2.1. From PCI:
Bus 1 (PCI Express), Device Number 0, Device Function 0
Vendor 10ECh Realtek Semiconductor Co., Ltd.
Device 8168h RTL8111/8168B PCI Express Gigabit Ethernet controller
Subsystem ID 76361462h Onboard RTL8111b on MSI P965 Platinum Mainboard (Guess Only!)
Subsystem Vendor 1462h Micro-Star International Co., Ltd.
I have been using the R8110 driver supplied with eCS 2.1. In order to get it to work I needed to define the NETADDRESS parameter.
When I try to use the new R8169 driver (after removing the R8110 driver) I can not access any network - either Internet or local SAMBA. I added TCPIP and TCPBEUI to the driver in MPTS. Also tried defining NETADDRESS but no change. In both cases the driver seems to load and it is listed in the hardware manager. I can also ping 127.0.0.1 and 192.168.0.4 (the static IP of this machine) but no other local or Internet IPs.
Attachments (2)
Change History (7)
comment:1 by , 13 years ago
| Component: | r8110 → r8169 |
|---|---|
| Owner: | set to |
| Status: | new → accepted |
| Version: | 0.0.1 → 0.0.3 |
by , 13 years ago
| Attachment: | RTL8111.txt added |
|---|
comment:2 by , 13 years ago
I have the same onboard chip on a Lenovo ThinkCentre A70 and for the R8169 driver the behaviour exactly matches the one described above.
comment:3 by , 13 years ago
| Version: | 0.0.3 → 0.0.4 |
|---|
Same behavior with 0.0.4. Formatted trace attached.
comment:5 by , 13 years ago
| Resolution: | → fixed |
|---|---|
| Status: | accepted → closed |
section of the output from PCI.EXE