TRAP 000e at ACPI load with Intel D945GCNL board

[lewisr]

Fresh install of eCS 2.0 RC4 (ACPI 3.05). Booting from the CD at default values (ACPI enabled) results in the attached screenshot. Disabling ACPI allows boot, but subsequent attempts to re-enable ACPI (tried a mix of options) result in the sape TRAP e.

PCI output looks interesting, and may be worthy of note:

End of output:

ROM PCI IRQ routing table Windows 9x Compatibility Tests....

ROM IRQ routing table found at F000h:E990h Table Version 1.0 - OK Table size 352 bytes - OK Table Checksum 3Bh - Failed! IRQ's dedicated to PCI : None The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 9,10,11,14,15 are used by PCI devices Shared IRQs: IRQ 9 is shared by 4 PCI Devices

IRQ 10 is shared by 3 PCI Devices IRQ 11 is shared by 4 PCI Devices

(Complete PCI dump attached.)

System details:

Intel D945GCNL system board Intel 1.8GHZ Celeron D 430 LGA775 800MHz FSB 1GB DDR2 PC2-5300 667MHz RAM BIOS defaults

[lewisr]

PCI output

[lewisr]

Screenshot of TRAP 000e

[eco]

• Can you try ACPI 3.7?
• Try sort devices via BIOS setup.
• if using Bootable JFS and have traps then chkdsk x: /f from eCS 2.0 CD1.

Pasha talks: please make screenshot of trap: select your case ​http://ecomstation.ru/projects/acpitools/?action=logs (more OS2LOGO, make photo of screen)

[Steven Levine]

Waited long enough for feedback.