| 1 | smartctl version 5.37 [i386-pc-ibmvac365] Copyright (C) 2002-8 Bruce Allen
|
|---|
| 2 | Home page is http://smartmontools.sourceforge.net/
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Seagate Maxtor DiamondMax 21
|
|---|
| 6 | Device Model: MAXTOR STM3320820AS
|
|---|
| 7 | Serial Number: 9QF8J4RR
|
|---|
| 8 | Firmware Version: 3.AAE
|
|---|
| 9 | User Capacity: 320,072,933,376 bytes
|
|---|
| 10 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 11 | ATA Version is: 7
|
|---|
| 12 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 13 | Local Time is: Sat Jan 14 23:41:09 2012
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 |
|
|---|
| 17 | === START OF READ SMART DATA SECTION ===
|
|---|
| 18 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 19 | See vendor-specific Attribute list for marginal Attributes.
|
|---|
| 20 |
|
|---|
| 21 | General SMART Values:
|
|---|
| 22 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 23 | was completed without error.
|
|---|
| 24 | Auto Offline Data Collection: Enabled.
|
|---|
| 25 | Self-test execution status: ( 40) The self-test routine was interrupted
|
|---|
| 26 | by the host with a hard or soft reset.
|
|---|
| 27 | Total time to complete Offline
|
|---|
| 28 | data collection: ( 430) seconds.
|
|---|
| 29 | Offline data collection
|
|---|
| 30 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 31 | Auto Offline data collection on/off support.
|
|---|
| 32 | Suspend Offline collection upon new
|
|---|
| 33 | command.
|
|---|
| 34 | Offline surface scan supported.
|
|---|
| 35 | Self-test supported.
|
|---|
| 36 | No Conveyance Self-test supported.
|
|---|
| 37 | Selective Self-test supported.
|
|---|
| 38 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 39 | power-saving mode.
|
|---|
| 40 | Supports SMART auto save timer.
|
|---|
| 41 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 42 | General Purpose Logging supported.
|
|---|
| 43 | Short self-test routine
|
|---|
| 44 | recommended polling time: ( 1) minutes.
|
|---|
| 45 | Extended self-test routine
|
|---|
| 46 | recommended polling time: ( 115) minutes.
|
|---|
| 47 |
|
|---|
| 48 | SMART Attributes Data Structure revision number: 10
|
|---|
| 49 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 50 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 51 | 1 Raw_Read_Error_Rate 0x000f 119 090 006 Pre-fail Always - 217029400
|
|---|
| 52 | 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
|
|---|
| 53 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 316
|
|---|
| 54 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 55 | 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 378962816
|
|---|
| 56 | 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6396
|
|---|
| 57 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 58 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 322
|
|---|
| 59 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 60 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 61 | 190 Airflow_Temperature_Cel 0x0022 053 044 045 Old_age Always In_the_past 47 (Lifetime Min/Max 47/47)
|
|---|
| 62 | 194 Temperature_Celsius 0x0022 047 056 000 Old_age Always - 47 (0 21 0 0)
|
|---|
| 63 | 195 Hardware_ECC_Recovered 0x001a 099 061 000 Old_age Always - 86560448
|
|---|
| 64 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 65 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 66 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 67 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|---|
| 68 | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
|
|---|
| 69 |
|
|---|
| 70 | SMART Error Log Version: 1
|
|---|
| 71 | No Errors Logged
|
|---|
| 72 |
|
|---|
| 73 | SMART Self-test log structure revision number 1
|
|---|
| 74 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 75 | # 1 Extended offline Interrupted (host reset) 80% 6396 -
|
|---|
| 76 | # 2 Short offline Completed without error 00% 6376 -
|
|---|
| 77 | # 3 Short offline Completed without error 00% 6203 -
|
|---|
| 78 |
|
|---|
| 79 | SMART Selective self-test log data structure revision number 1
|
|---|
| 80 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 81 | 1 0 0 Not_testing
|
|---|
| 82 | 2 0 0 Not_testing
|
|---|
| 83 | 3 0 0 Not_testing
|
|---|
| 84 | 4 0 0 Not_testing
|
|---|
| 85 | 5 0 0 Not_testing
|
|---|
| 86 | Selective self-test flags (0x0):
|
|---|
| 87 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 88 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 89 |
|
|---|
| 90 | smartctl version 5.37 [i386-pc-ibmvac365] Copyright (C) 2002-8 Bruce Allen
|
|---|
| 91 | Home page is http://smartmontools.sourceforge.net/
|
|---|
| 92 |
|
|---|
| 93 | === START OF INFORMATION SECTION ===
|
|---|
| 94 | Model Family: Seagate Maxtor DiamondMax 21
|
|---|
| 95 | Device Model: MAXTOR STM3320820AS
|
|---|
| 96 | Serial Number: 9QF8J51H
|
|---|
| 97 | Firmware Version: 3.AAE
|
|---|
| 98 | User Capacity: 320,072,933,376 bytes
|
|---|
| 99 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 100 | ATA Version is: 7
|
|---|
| 101 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 102 | Local Time is: Sat Jan 14 23:41:15 2012
|
|---|
| 103 | SMART support is: Available - device has SMART capability.
|
|---|
| 104 | SMART support is: Enabled
|
|---|
| 105 |
|
|---|
| 106 | === START OF READ SMART DATA SECTION ===
|
|---|
| 107 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 108 |
|
|---|
| 109 | General SMART Values:
|
|---|
| 110 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 111 | was completed without error.
|
|---|
| 112 | Auto Offline Data Collection: Enabled.
|
|---|
| 113 | Self-test execution status: ( 40) The self-test routine was interrupted
|
|---|
| 114 | by the host with a hard or soft reset.
|
|---|
| 115 | Total time to complete Offline
|
|---|
| 116 | data collection: ( 430) seconds.
|
|---|
| 117 | Offline data collection
|
|---|
| 118 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 119 | Auto Offline data collection on/off support.
|
|---|
| 120 | Suspend Offline collection upon new
|
|---|
| 121 | command.
|
|---|
| 122 | Offline surface scan supported.
|
|---|
| 123 | Self-test supported.
|
|---|
| 124 | No Conveyance Self-test supported.
|
|---|
| 125 | Selective Self-test supported.
|
|---|
| 126 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 127 | power-saving mode.
|
|---|
| 128 | Supports SMART auto save timer.
|
|---|
| 129 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 130 | General Purpose Logging supported.
|
|---|
| 131 | Short self-test routine
|
|---|
| 132 | recommended polling time: ( 1) minutes.
|
|---|
| 133 | Extended self-test routine
|
|---|
| 134 | recommended polling time: ( 115) minutes.
|
|---|
| 135 |
|
|---|
| 136 | SMART Attributes Data Structure revision number: 10
|
|---|
| 137 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 138 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 139 | 1 Raw_Read_Error_Rate 0x000f 119 090 006 Pre-fail Always - 206543921
|
|---|
| 140 | 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
|
|---|
| 141 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 325
|
|---|
| 142 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 143 | 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 378577993
|
|---|
| 144 | 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6433
|
|---|
| 145 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 146 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 331
|
|---|
| 147 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 148 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 149 | 190 Airflow_Temperature_Cel 0x0022 056 046 045 Old_age Always - 44 (Lifetime Min/Max 44/44)
|
|---|
| 150 | 194 Temperature_Celsius 0x0022 044 054 000 Old_age Always - 44 (0 21 0 0)
|
|---|
| 151 | 195 Hardware_ECC_Recovered 0x001a 097 060 000 Old_age Always - 225862532
|
|---|
| 152 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 153 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 154 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 155 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|---|
| 156 | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
|
|---|
| 157 |
|
|---|
| 158 | SMART Error Log Version: 1
|
|---|
| 159 | No Errors Logged
|
|---|
| 160 |
|
|---|
| 161 | SMART Self-test log structure revision number 1
|
|---|
| 162 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 163 | # 1 Extended offline Interrupted (host reset) 80% 6432 -
|
|---|
| 164 | # 2 Short offline Completed without error 00% 6411 -
|
|---|
| 165 | # 3 Short offline Completed without error 00% 6239 -
|
|---|
| 166 |
|
|---|
| 167 | SMART Selective self-test log data structure revision number 1
|
|---|
| 168 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 169 | 1 0 0 Not_testing
|
|---|
| 170 | 2 0 0 Not_testing
|
|---|
| 171 | 3 0 0 Not_testing
|
|---|
| 172 | 4 0 0 Not_testing
|
|---|
| 173 | 5 0 0 Not_testing
|
|---|
| 174 | Selective self-test flags (0x0):
|
|---|
| 175 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 176 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 177 |
|
|---|
| 178 | smartctl version 5.37 [i386-pc-ibmvac365] Copyright (C) 2002-8 Bruce Allen
|
|---|
| 179 | Home page is http://smartmontools.sourceforge.net/
|
|---|
| 180 |
|
|---|
| 181 | === START OF INFORMATION SECTION ===
|
|---|
| 182 | Model Family: Seagate Maxtor DiamondMax 21
|
|---|
| 183 | Device Model: MAXTOR STM3320820A
|
|---|
| 184 | Serial Number: 5QF4MNP9
|
|---|
| 185 | Firmware Version: 3.AAE
|
|---|
| 186 | User Capacity: 320,072,933,376 bytes
|
|---|
| 187 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 188 | ATA Version is: 7
|
|---|
| 189 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 190 | Local Time is: Sat Jan 14 23:41:17 2012
|
|---|
| 191 | SMART support is: Available - device has SMART capability.
|
|---|
| 192 | SMART support is: Enabled
|
|---|
| 193 |
|
|---|
| 194 | === START OF READ SMART DATA SECTION ===
|
|---|
| 195 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 196 |
|
|---|
| 197 | General SMART Values:
|
|---|
| 198 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 199 | was completed without error.
|
|---|
| 200 | Auto Offline Data Collection: Enabled.
|
|---|
| 201 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 202 | without error or no self-test has ever
|
|---|
| 203 | been run.
|
|---|
| 204 | Total time to complete Offline
|
|---|
| 205 | data collection: ( 430) seconds.
|
|---|
| 206 | Offline data collection
|
|---|
| 207 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 208 | Auto Offline data collection on/off support.
|
|---|
| 209 | Suspend Offline collection upon new
|
|---|
| 210 | command.
|
|---|
| 211 | Offline surface scan supported.
|
|---|
| 212 | Self-test supported.
|
|---|
| 213 | No Conveyance Self-test supported.
|
|---|
| 214 | Selective Self-test supported.
|
|---|
| 215 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 216 | power-saving mode.
|
|---|
| 217 | Supports SMART auto save timer.
|
|---|
| 218 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 219 | General Purpose Logging supported.
|
|---|
| 220 | Short self-test routine
|
|---|
| 221 | recommended polling time: ( 1) minutes.
|
|---|
| 222 | Extended self-test routine
|
|---|
| 223 | recommended polling time: ( 115) minutes.
|
|---|
| 224 |
|
|---|
| 225 | SMART Attributes Data Structure revision number: 10
|
|---|
| 226 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 227 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 228 | 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 52119671
|
|---|
| 229 | 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
|
|---|
| 230 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 331
|
|---|
| 231 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 232 | 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 99364896
|
|---|
| 233 | 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6312
|
|---|
| 234 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 235 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 345
|
|---|
| 236 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 237 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 238 | 190 Airflow_Temperature_Cel 0x0022 057 051 045 Old_age Always - 43 (Lifetime Min/Max 43/43)
|
|---|
| 239 | 194 Temperature_Celsius 0x0022 043 049 000 Old_age Always - 43 (0 20 0 0)
|
|---|
| 240 | 195 Hardware_ECC_Recovered 0x001a 068 051 000 Old_age Always - 110487375
|
|---|
| 241 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 242 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 243 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 244 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|---|
| 245 | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
|
|---|
| 246 |
|
|---|
| 247 | SMART Error Log Version: 1
|
|---|
| 248 | No Errors Logged
|
|---|
| 249 |
|
|---|
| 250 | SMART Self-test log structure revision number 1
|
|---|
| 251 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 252 | # 1 Short offline Completed without error 00% 6292 -
|
|---|
| 253 |
|
|---|
| 254 | SMART Selective self-test log data structure revision number 1
|
|---|
| 255 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 256 | 1 0 0 Not_testing
|
|---|
| 257 | 2 0 0 Not_testing
|
|---|
| 258 | 3 0 0 Not_testing
|
|---|
| 259 | 4 0 0 Not_testing
|
|---|
| 260 | 5 0 0 Not_testing
|
|---|
| 261 | Selective self-test flags (0x0):
|
|---|
| 262 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 263 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 264 |
|
|---|
| 265 | smartctl version 5.37 [i386-pc-ibmvac365] Copyright (C) 2002-8 Bruce Allen
|
|---|
| 266 | Home page is http://smartmontools.sourceforge.net/
|
|---|
| 267 |
|
|---|
| 268 | === START OF INFORMATION SECTION ===
|
|---|
| 269 | Model Family: Seagate Maxtor DiamondMax 21
|
|---|
| 270 | Device Model: MAXTOR STM3320820A
|
|---|
| 271 | Serial Number: 9QFASLJC
|
|---|
| 272 | Firmware Version: 3.AAE
|
|---|
| 273 | User Capacity: 320,072,933,376 bytes
|
|---|
| 274 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 275 | ATA Version is: 7
|
|---|
| 276 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 277 | Local Time is: Sat Jan 14 23:41:20 2012
|
|---|
| 278 | SMART support is: Available - device has SMART capability.
|
|---|
| 279 | SMART support is: Enabled
|
|---|
| 280 |
|
|---|
| 281 | === START OF READ SMART DATA SECTION ===
|
|---|
| 282 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 283 |
|
|---|
| 284 | General SMART Values:
|
|---|
| 285 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 286 | was completed without error.
|
|---|
| 287 | Auto Offline Data Collection: Enabled.
|
|---|
| 288 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 289 | without error or no self-test has ever
|
|---|
| 290 | been run.
|
|---|
| 291 | Total time to complete Offline
|
|---|
| 292 | data collection: ( 430) seconds.
|
|---|
| 293 | Offline data collection
|
|---|
| 294 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 295 | Auto Offline data collection on/off support.
|
|---|
| 296 | Suspend Offline collection upon new
|
|---|
| 297 | command.
|
|---|
| 298 | Offline surface scan supported.
|
|---|
| 299 | Self-test supported.
|
|---|
| 300 | No Conveyance Self-test supported.
|
|---|
| 301 | Selective Self-test supported.
|
|---|
| 302 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 303 | power-saving mode.
|
|---|
| 304 | Supports SMART auto save timer.
|
|---|
| 305 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 306 | General Purpose Logging supported.
|
|---|
| 307 | Short self-test routine
|
|---|
| 308 | recommended polling time: ( 1) minutes.
|
|---|
| 309 | Extended self-test routine
|
|---|
| 310 | recommended polling time: ( 115) minutes.
|
|---|
| 311 |
|
|---|
| 312 | SMART Attributes Data Structure revision number: 10
|
|---|
| 313 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 314 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 315 | 1 Raw_Read_Error_Rate 0x000f 118 088 006 Pre-fail Always - 189297547
|
|---|
| 316 | 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
|
|---|
| 317 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 268
|
|---|
| 318 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
|
|---|
| 319 | 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 188417789
|
|---|
| 320 | 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5963
|
|---|
| 321 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 322 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 287
|
|---|
| 323 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 324 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 325 | 190 Airflow_Temperature_Cel 0x0022 055 049 045 Old_age Always - 45 (Lifetime Min/Max 44/45)
|
|---|
| 326 | 194 Temperature_Celsius 0x0022 045 051 000 Old_age Always - 45 (0 25 0 0)
|
|---|
| 327 | 195 Hardware_ECC_Recovered 0x001a 089 053 000 Old_age Always - 101814206
|
|---|
| 328 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 329 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 330 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 331 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|---|
| 332 | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
|
|---|
| 333 |
|
|---|
| 334 | SMART Error Log Version: 1
|
|---|
| 335 | No Errors Logged
|
|---|
| 336 |
|
|---|
| 337 | SMART Self-test log structure revision number 1
|
|---|
| 338 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 339 | # 1 Short offline Completed without error 00% 5943 -
|
|---|
| 340 |
|
|---|
| 341 | SMART Selective self-test log data structure revision number 1
|
|---|
| 342 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 343 | 1 0 0 Not_testing
|
|---|
| 344 | 2 0 0 Not_testing
|
|---|
| 345 | 3 0 0 Not_testing
|
|---|
| 346 | 4 0 0 Not_testing
|
|---|
| 347 | 5 0 0 Not_testing
|
|---|
| 348 | Selective self-test flags (0x0):
|
|---|
| 349 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 350 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 351 |
|
|---|
