Opened 12 years ago

Closed 11 years ago

#42 closed defect (wontfix)

usbhcd189 does not attach devices

Reported by: guzzi Owned by: somebody
Priority: major Component: basedrv
Version: Keywords:
Cc:

Description

When using usbhcd189 devices that I plug in aren't 'scanned' and do not show up in the USB resource maner or USB dock programs. version 185 does work and also recognizes ever disk I attach (188 would on some disks start beeping but disk would not be attached) Kernel 14.104 SMP Core2quad processor ACPI 3.21.06

config.sys: BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBUHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBEHCD.SYS BASEDEV=USBD.SYS BASEDEV=USBHID.SYS BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:8 BASEDEV=USBCDROM.ADD /CDS:1 /V /W DEVICE=E:\ECS\SYSTEM\AMOUSE\USBMOUSE.SYS DEVICE=E:\OS2\BOOT\USBKBD.SYS DEVICE=E:\OS2\BOOT\USBPRT.SYS DEVICE=E:\ECS\BOOT\USBRESMG.SYS

Attachments (2)

pciscan.lst​ (31.4 KB ) - added by guzzi 12 years ago.
usb.ftf​ (209.9 KB ) - added by guzzi 12 years ago.

Download all attachments as: .zip

Change History (6)

by guzzi, 12 years ago

Attachment: pciscan.lst​ added

by guzzi, 12 years ago

Attachment: usb.ftf​ added

comment:1 by Lars Erdmann, 12 years ago

see doug.zip, Ticket #45.

comment:2 by guzzi, 12 years ago

With only replacing the EHCI driver the mouse won't get attached at boot. With also usbd replaced the mouse does get attached, but anyting plugged in -after- boot will not show up.

comment:3 by Lars Erdmann, 12 years ago

Get 10.191 from Hobbes. Try different values for /S: switch for USBEHCD.SYS (see readme.txt).

comment:4 by Lars Erdmann, 11 years ago

Resolution: → wontfix
Status: new → closed

no response from bug reporter

Note: See TracTickets for help on using tickets.