No mouse, no keyboard with 188

[Leo Koelemij]

During execution of config.sys I hear two beeps at the beginning of the
CALL/RUN part; I cannot pinpoint the exact line. After config.sys
finished I have a complete desktop, however, I cannot do anything: the
mouse is dead, the keyboard is dead.

Motherboard: Intel DH67CL (no PS/2)

relevant part of config.sys:

DEVICE=I:\OS2\BOOT\USBPRT.SYS

DEVICE=I:\ECS\SYSTEM\AMouse\AMOUSE.SYS SMP

DEVICE=I:\ECS\SYSTEM\AMouse\USBMOUSE.SYS

DEVICE=I:\OS2\BOOT\USBKBD.SYS

DEVICE=I:\ECS\BOOT\USBRESMG.SYS

BASEDEV=IBMKBD.SYS

BASEDEV=USBEHCD.SYS

BASEDEV=USBEHCD.SYS

BASEDEV=USBD.SYS

BASEDEV=USBHID.SYS

BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:0

[abwillis]

May be related to ticket #35... I would try replacing usbehcd.sys from 187 and leave everything else at 188 and see if it works.

[David McKenna]

Also, if you are using the USB widget in the eCenter try removing it and see if that helps. I have one machine where USBEHCI does not work at all if that widget is loaded (although it used to work on earlier versions)...

[Leo Koelemij]

Replying to abwillis:

May be related to ticket #35... I would try replacing usbehcd.sys from 187 and leave everything else at 188 and see if it works.

I replaced usbehcd.sys 188 with 187 and I now have keyboard and mouse functioning.

[Leo Koelemij]

Replying to David McKenna:

Also, if you are using the USB widget in the eCenter try removing it and see if that helps. I have one machine where USBEHCI does not work at all if that widget is loaded (although it used to work on earlier versions)...

David, I am not using the NeoWPS USB widget because it always advised me to remove the attached USB drive too early

[Lars Erdmann]

10.188: outdated version, follow up ticket exists for newer version