1 | Craig Hart's PCI+AGP bus sniffer, Version 1.06vkA, freeware made in 1996-2008. |
---|
2 | Loaded Vendor Data : "This is version ha_merged, 13 Mar 2011 17:03:03" |
---|
3 | |
---|
4 | PCI BIOS Version 2.10 found! |
---|
5 | Number of PCI Busses : 25 |
---|
6 | PCI Characteristics : Config Mechanism 1 |
---|
7 | |
---|
8 | Searching for PCI Devices using the OEMHLP$ driver |
---|
9 | |
---|
10 | Bus 0 (PCI Express), Device Number 0, Device Function 0 |
---|
11 | Vendor 8086h Intel Corporation |
---|
12 | Device 2590h Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller |
---|
13 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
14 | Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
15 | Received Master Abort, Fast Timing) |
---|
16 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
17 | Self test 00h (Self test not supported) |
---|
18 | PCI Class Bridge, type PCI to HOST |
---|
19 | Subsystem ID 05751014h ThinkPad Z60t |
---|
20 | Subsystem Vendor 1014h IBM |
---|
21 | New Capabilities List Present: |
---|
22 | Vendor-Dependant Capability |
---|
23 | |
---|
24 | Bus 0 (PCI Express), Device Number 1, Device Function 0 |
---|
25 | Vendor 8086h Intel Corporation |
---|
26 | Device 2591h Mobile 915GM/PM Express PCI Express Root Port |
---|
27 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
28 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
29 | Revision 03h, Header Type 01h, Bus Latency Timer 00h |
---|
30 | Self test 00h (Self test not supported) |
---|
31 | Cache line size 32 Bytes (8 DWords) |
---|
32 | PCI Class Bridge, type PCI to PCI |
---|
33 | Subsystem ID 05781014h Unknown |
---|
34 | Subsystem Vendor 1014h IBM |
---|
35 | System IRQ 11, INT# A |
---|
36 | PCI Bridge Information: |
---|
37 | Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1 |
---|
38 | Secondary Bus Command 000Ch (ISA mapping, VGA mapping) |
---|
39 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing) |
---|
40 | Secondary Bus Latency 00h |
---|
41 | Note: nonzero Secondary Bus Latency recommended! |
---|
42 | I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit I/O space) |
---|
43 | Memory Range Passed to Secondary Bus : A8100000h..A81FFFFFh |
---|
44 | Prefetchable Memory Range Passed to Secondary Bus : C0000000h..C7FFFFFFh |
---|
45 | New Capabilities List Present: |
---|
46 | Subsystem ID & Subsystem Vendor ID Capability |
---|
47 | SSVID : 1014h |
---|
48 | SSID : 0578h |
---|
49 | Power Management Capability, Version 1.1 |
---|
50 | Does not support low power State D1 or D2 |
---|
51 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
52 | PME# signalling is currently disabled |
---|
53 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
54 | Current Power State : D0 (Device operational, no power saving) |
---|
55 | Message Signalled Interrupt Capability |
---|
56 | MSI is disabled |
---|
57 | MSI function can generate 32-bit addresses |
---|
58 | PCI Express Capability, Version 1 |
---|
59 | Device/Port Type : |
---|
60 | Root port of PCI Express Root Complex |
---|
61 | Port Type : |
---|
62 | Port is an Expansion Slot |
---|
63 | Unsupported Request Severity is Non-Fatal |
---|
64 | Device Status : |
---|
65 | Link Capabilities : |
---|
66 | Maximum Link speed : 2.5Gb/s |
---|
67 | Maximum Link Width : x16 |
---|
68 | Link Port Number : 2 |
---|
69 | Link Control : |
---|
70 | Asynchronous Clocking in Use |
---|
71 | Link Status : |
---|
72 | Current Link speed : 2.5Gb/s |
---|
73 | Current Link Width : x16 |
---|
74 | Slot Capabilities : |
---|
75 | Slot Power Limit Value : 4.000 Watts |
---|
76 | Physical slot Number 0 |
---|
77 | |
---|
78 | Bus 0 (PCI Express), Device Number 28, Device Function 0 |
---|
79 | Vendor 8086h Intel Corporation |
---|
80 | Device 2660h 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 |
---|
81 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
82 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
83 | Revision 03h, Header Type 81h, Bus Latency Timer 00h |
---|
84 | Self test 00h (Self test not supported) |
---|
85 | Cache line size 32 Bytes (8 DWords) |
---|
86 | PCI Class Bridge, type PCI to PCI |
---|
87 | System IRQ 11, INT# A |
---|
88 | PCI Bridge Information: |
---|
89 | Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2 |
---|
90 | Secondary Bus Command 0004h (ISA mapping) |
---|
91 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing) |
---|
92 | Secondary Bus Latency 00h |
---|
93 | Note: nonzero Secondary Bus Latency recommended! |
---|
94 | I/O Port Range Passed to Secondary Bus : None |
---|
95 | Memory Range Passed to Secondary Bus : A8200000h..A82FFFFFh |
---|
96 | Prefetchable Memory Range Passed to Secondary Bus : None |
---|
97 | New Capabilities List Present: |
---|
98 | PCI Express Capability, Version 1 |
---|
99 | Device/Port Type : |
---|
100 | Root port of PCI Express Root Complex |
---|
101 | Port Type : |
---|
102 | Port is an Expansion Slot |
---|
103 | Unsupported Request Severity is Non-Fatal |
---|
104 | Device Status : |
---|
105 | Correctable Error Detected |
---|
106 | AUX Power Detected |
---|
107 | Link Capabilities : |
---|
108 | Maximum Link speed : 2.5Gb/s |
---|
109 | Maximum Link Width : x1 |
---|
110 | Link Port Number : 1 |
---|
111 | Link Control : |
---|
112 | Common Clock Configuration In Use |
---|
113 | Link Status : |
---|
114 | Current Link speed : 2.5Gb/s |
---|
115 | Current Link Width : x1 |
---|
116 | Slot Capabilities : |
---|
117 | Hot Plug Surprise is Possible |
---|
118 | Hot Plug Capable |
---|
119 | Slot Power Limit Value : 2.000 Watts |
---|
120 | Physical slot Number 0 |
---|
121 | Message Signalled Interrupt Capability |
---|
122 | MSI is disabled |
---|
123 | MSI function can generate 32-bit addresses |
---|
124 | Subsystem ID & Subsystem Vendor ID Capability |
---|
125 | SSVID : 0000h |
---|
126 | SSID : 0000h |
---|
127 | Power Management Capability, Version 1.1 |
---|
128 | Does not support low power State D1 or D2 |
---|
129 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
130 | PME# signalling is currently disabled |
---|
131 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
132 | Current Power State : D0 (Device operational, no power saving) |
---|
133 | |
---|
134 | Bus 0 (PCI Express), Device Number 28, Device Function 2 |
---|
135 | Vendor 8086h Intel Corporation |
---|
136 | Device 2664h 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 |
---|
137 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
138 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
139 | Revision 03h, Header Type 81h, Bus Latency Timer 00h |
---|
140 | Self test 00h (Self test not supported) |
---|
141 | Cache line size 32 Bytes (8 DWords) |
---|
142 | PCI Class Bridge, type PCI to PCI |
---|
143 | System IRQ 11, INT# C |
---|
144 | PCI Bridge Information: |
---|
145 | Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 10 |
---|
146 | Secondary Bus Command 0004h (ISA mapping) |
---|
147 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing) |
---|
148 | Secondary Bus Latency 00h |
---|
149 | Note: nonzero Secondary Bus Latency recommended! |
---|
150 | I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit I/O space) |
---|
151 | Memory Range Passed to Secondary Bus : AA000000h..ABFFFFFFh |
---|
152 | Prefetchable Memory Range Passed to Secondary Bus : C8000000h..C80FFFFFh |
---|
153 | New Capabilities List Present: |
---|
154 | PCI Express Capability, Version 1 |
---|
155 | Device/Port Type : |
---|
156 | Root port of PCI Express Root Complex |
---|
157 | Port Type : |
---|
158 | Port is an Expansion Slot |
---|
159 | Unsupported Request Severity is Non-Fatal |
---|
160 | Device Status : |
---|
161 | AUX Power Detected |
---|
162 | Link Capabilities : |
---|
163 | Maximum Link speed : 2.5Gb/s |
---|
164 | Maximum Link Width : x1 |
---|
165 | Link Port Number : 3 |
---|
166 | Link Control : |
---|
167 | Asynchronous Clocking in Use |
---|
168 | Link Status : |
---|
169 | Current Link speed : 2.5Gb/s |
---|
170 | Current Link Width : x0 |
---|
171 | Slot Capabilities : |
---|
172 | Hot Plug Surprise is Possible |
---|
173 | Hot Plug Capable |
---|
174 | Slot Power Limit Value : 6.000 Watts |
---|
175 | Physical slot Number 0 |
---|
176 | Message Signalled Interrupt Capability |
---|
177 | MSI is disabled |
---|
178 | MSI function can generate 32-bit addresses |
---|
179 | Subsystem ID & Subsystem Vendor ID Capability |
---|
180 | SSVID : 0000h |
---|
181 | SSID : 0000h |
---|
182 | Power Management Capability, Version 1.1 |
---|
183 | Does not support low power State D1 or D2 |
---|
184 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
185 | PME# signalling is currently disabled |
---|
186 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
187 | Current Power State : D0 (Device operational, no power saving) |
---|
188 | |
---|
189 | Bus 0 (PCI Express), Device Number 29, Device Function 0 |
---|
190 | Vendor 8086h Intel Corporation |
---|
191 | Device 2658h 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 |
---|
192 | Command 0005h (I/O Access, BusMaster) |
---|
193 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
194 | Revision 03h, Header Type 80h, Bus Latency Timer 00h |
---|
195 | Self test 00h (Self test not supported) |
---|
196 | PCI Class Serial, type USB (UHCI) |
---|
197 | Subsystem ID 05651014h Unknown |
---|
198 | Subsystem Vendor 1014h IBM |
---|
199 | Address 0 is not present or not configured! |
---|
200 | Address 1 is not present or not configured! |
---|
201 | Address 2 is not present or not configured! |
---|
202 | Address 3 is not present or not configured! |
---|
203 | Address 4 is an I/O Port : 1800h |
---|
204 | ResourceSize(00001800h, ResourceIO) [Tree: physical , result=14h] |
---|
205 | ResourceSize(00001800h, ResourceIO) [Tree: driver , result=20h] |
---|
206 | ResourceSize(00001800h, ResourceIO) [Tree: curr. detect, result=20h] |
---|
207 | ResourceSize(00001800h, ResourceIO) [Tree: prev. detect, result=20h] |
---|
208 | ..181Fh |
---|
209 | System IRQ 11, INT# A |
---|
210 | |
---|
211 | Bus 0 (PCI Express), Device Number 29, Device Function 1 |
---|
212 | Vendor 8086h Intel Corporation |
---|
213 | Device 2659h 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 |
---|
214 | Command 0005h (I/O Access, BusMaster) |
---|
215 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
216 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
217 | Self test 00h (Self test not supported) |
---|
218 | PCI Class Serial, type USB (UHCI) |
---|
219 | Subsystem ID 05651014h Unknown |
---|
220 | Subsystem Vendor 1014h IBM |
---|
221 | Address 0 is not present or not configured! |
---|
222 | Address 1 is not present or not configured! |
---|
223 | Address 2 is not present or not configured! |
---|
224 | Address 3 is not present or not configured! |
---|
225 | Address 4 is an I/O Port : 1820h |
---|
226 | ResourceSize(00001820h, ResourceIO) [Tree: physical , result=14h] |
---|
227 | ResourceSize(00001820h, ResourceIO) [Tree: driver , result=20h] |
---|
228 | ResourceSize(00001820h, ResourceIO) [Tree: curr. detect, result=20h] |
---|
229 | ResourceSize(00001820h, ResourceIO) [Tree: prev. detect, result=20h] |
---|
230 | ..183Fh |
---|
231 | System IRQ 11, INT# B |
---|
232 | |
---|
233 | Bus 0 (PCI Express), Device Number 29, Device Function 2 |
---|
234 | Vendor 8086h Intel Corporation |
---|
235 | Device 265Ah 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 |
---|
236 | Command 0005h (I/O Access, BusMaster) |
---|
237 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
238 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
239 | Self test 00h (Self test not supported) |
---|
240 | PCI Class Serial, type USB (UHCI) |
---|
241 | Subsystem ID 05651014h Unknown |
---|
242 | Subsystem Vendor 1014h IBM |
---|
243 | Address 0 is not present or not configured! |
---|
244 | Address 1 is not present or not configured! |
---|
245 | Address 2 is not present or not configured! |
---|
246 | Address 3 is not present or not configured! |
---|
247 | Address 4 is an I/O Port : 1840h |
---|
248 | ResourceSize(00001840h, ResourceIO) [Tree: physical , result=14h] |
---|
249 | ResourceSize(00001840h, ResourceIO) [Tree: driver , result=20h] |
---|
250 | ResourceSize(00001840h, ResourceIO) [Tree: curr. detect, result=20h] |
---|
251 | ResourceSize(00001840h, ResourceIO) [Tree: prev. detect, result=20h] |
---|
252 | ..185Fh |
---|
253 | System IRQ 11, INT# C |
---|
254 | |
---|
255 | Bus 0 (PCI Express), Device Number 29, Device Function 3 |
---|
256 | Vendor 8086h Intel Corporation |
---|
257 | Device 265Bh 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 |
---|
258 | Command 0005h (I/O Access, BusMaster) |
---|
259 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
260 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
261 | Self test 00h (Self test not supported) |
---|
262 | PCI Class Serial, type USB (UHCI) |
---|
263 | Subsystem ID 05651014h Unknown |
---|
264 | Subsystem Vendor 1014h IBM |
---|
265 | Address 0 is not present or not configured! |
---|
266 | Address 1 is not present or not configured! |
---|
267 | Address 2 is not present or not configured! |
---|
268 | Address 3 is not present or not configured! |
---|
269 | Address 4 is an I/O Port : 1860h |
---|
270 | ResourceSize(00001860h, ResourceIO) [Tree: physical , result=14h] |
---|
271 | ResourceSize(00001860h, ResourceIO) [Tree: driver , result=20h] |
---|
272 | ResourceSize(00001860h, ResourceIO) [Tree: curr. detect, result=20h] |
---|
273 | ResourceSize(00001860h, ResourceIO) [Tree: prev. detect, result=20h] |
---|
274 | ..187Fh |
---|
275 | System IRQ 11, INT# D |
---|
276 | |
---|
277 | Bus 0 (PCI Express), Device Number 29, Device Function 7 |
---|
278 | Vendor 8086h Intel Corporation |
---|
279 | Device 265Ch 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller |
---|
280 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
281 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
282 | Medium Timing) |
---|
283 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
284 | Self test 00h (Self test not supported) |
---|
285 | PCI Class Serial, type USB 2.0 (EHCI) |
---|
286 | Subsystem ID 05661014h Unknown |
---|
287 | Subsystem Vendor 1014h IBM |
---|
288 | Address 0 is a Memory Address (0-4GiB) : A8000000h |
---|
289 | ResourceSize(A8000000h, ResourceMem) [Tree: physical , result=100h] |
---|
290 | ResourceSize(A8000000h, ResourceMem) [Tree: driver , result=100h] |
---|
291 | ..A80000FFh |
---|
292 | System IRQ 11, INT# D |
---|
293 | New Capabilities List Present: |
---|
294 | Power Management Capability, Version 1.1 |
---|
295 | Does not support low power State D1 or D2 |
---|
296 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
297 | PME# signalling is currently disabled |
---|
298 | 3.3v AUX Current required : 375 mA |
---|
299 | Current Power State : D0 (Device operational, no power saving) |
---|
300 | USB 2.0 EHCI Debug Port Capability |
---|
301 | |
---|
302 | Bus 0 (PCI Express), Device Number 30, Device Function 0 |
---|
303 | Vendor 8086h Intel Corporation |
---|
304 | Device 2448h 82801 Mobile PCI Bridge |
---|
305 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
306 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
307 | Revision D3h, Header Type 81h, Bus Latency Timer 00h |
---|
308 | Self test 00h (Self test not supported) |
---|
309 | PCI Class Bridge, type PCI to PCI (Subtractive Decode) |
---|
310 | PCI Bridge Information: |
---|
311 | Primary Bus Number 0, Secondary Bus Number 11, Subordinate Bus number 24 |
---|
312 | Secondary Bus Command 0004h (ISA mapping) |
---|
313 | Secondary Bus Status 2280h (Supports Back-To-Back Trans., |
---|
314 | Received Master Abort, Medium Timing) |
---|
315 | Secondary Bus Latency 40h |
---|
316 | I/O Port Range Passed to Secondary Bus : 5000h..9FFFh (16-bit I/O space) |
---|
317 | Memory Range Passed to Secondary Bus : AC000000h..B80FFFFFh |
---|
318 | Prefetchable Memory Range Passed to Secondary Bus : D0000000h..D7FFFFFFh |
---|
319 | New Capabilities List Present: |
---|
320 | Subsystem ID & Subsystem Vendor ID Capability |
---|
321 | SSVID : 0000h |
---|
322 | SSID : 0000h |
---|
323 | |
---|
324 | Bus 0 (PCI Express), Device Number 30, Device Function 2 |
---|
325 | Vendor 8086h Intel Corporation |
---|
326 | Device 266Eh 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller |
---|
327 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
328 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
329 | Medium Timing) |
---|
330 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
331 | Self test 00h (Self test not supported) |
---|
332 | PCI Class Multimedia, type Audio |
---|
333 | Subsystem ID 05671014h SoundMAX Integrated Digital Audio (Guess Only!) |
---|
334 | Subsystem Vendor 1014h IBM |
---|
335 | Address 0 is an I/O Port : 1C00h |
---|
336 | ResourceSize(00001C00h, ResourceIO) [Tree: physical , result=100h] |
---|
337 | ResourceSize(00001C00h, ResourceIO) [Tree: driver , result=100h] |
---|
338 | ResourceSize(00001C00h, ResourceIO) [Tree: curr. detect, result=100h] |
---|
339 | ResourceSize(00001C00h, ResourceIO) [Tree: prev. detect, result=100h] |
---|
340 | ..1CFFh |
---|
341 | Address 1 is an I/O Port : 1880h |
---|
342 | ResourceSize(00001880h, ResourceIO) [Tree: physical , result=40h] |
---|
343 | ResourceSize(00001880h, ResourceIO) [Tree: driver , result=40h] |
---|
344 | ResourceSize(00001880h, ResourceIO) [Tree: curr. detect, result=40h] |
---|
345 | ResourceSize(00001880h, ResourceIO) [Tree: prev. detect, result=40h] |
---|
346 | ..18BFh |
---|
347 | Address 2 is a Memory Address (0-4GiB) : A8000800h |
---|
348 | ResourceSize(A8000800h, ResourceMem) [Tree: physical , result=200h] |
---|
349 | ResourceSize(A8000800h, ResourceMem) [Tree: driver , result=200h] |
---|
350 | ResourceSize(A8000800h, ResourceMem) [Tree: curr. detect, result=200h] |
---|
351 | ResourceSize(A8000800h, ResourceMem) [Tree: prev. detect, result=200h] |
---|
352 | ..A80009FFh |
---|
353 | Address 3 is a Memory Address (0-4GiB) : A8000400h |
---|
354 | ResourceSize(A8000400h, ResourceMem) [Tree: physical , result=100h] |
---|
355 | ResourceSize(A8000400h, ResourceMem) [Tree: driver , result=100h] |
---|
356 | ResourceSize(A8000400h, ResourceMem) [Tree: curr. detect, result=100h] |
---|
357 | ResourceSize(A8000400h, ResourceMem) [Tree: prev. detect, result=100h] |
---|
358 | ..A80004FFh |
---|
359 | System IRQ 11, INT# A |
---|
360 | New Capabilities List Present: |
---|
361 | Power Management Capability, Version 1.1 |
---|
362 | Does not support low power State D1 or D2 |
---|
363 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
364 | PME# signalling is currently disabled |
---|
365 | 3.3v AUX Current required : 375 mA |
---|
366 | Current Power State : D0 (Device operational, no power saving) |
---|
367 | |
---|
368 | Bus 0 (PCI Express), Device Number 30, Device Function 3 |
---|
369 | Vendor 8086h Intel Corporation |
---|
370 | Device 266Dh 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller |
---|
371 | Command 0005h (I/O Access, BusMaster) |
---|
372 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
373 | Medium Timing) |
---|
374 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
375 | Self test 00h (Self test not supported) |
---|
376 | PCI Class Simple Communication, type Hayes Compatible Modem |
---|
377 | Subsystem ID 05761014h Unknown |
---|
378 | Subsystem Vendor 1014h IBM |
---|
379 | Address 0 is an I/O Port : 2400h |
---|
380 | ResourceSize(00002400h, ResourceIO) [Tree: driver , result=100h] |
---|
381 | ResourceSize(00002400h, ResourceIO) [Tree: curr. detect, result=100h] |
---|
382 | ResourceSize(00002400h, ResourceIO) [Tree: prev. detect, result=100h] |
---|
383 | ..24FFh |
---|
384 | Address 1 is an I/O Port : 2000h |
---|
385 | ResourceSize(00002000h, ResourceIO) [Tree: driver , result=80h] |
---|
386 | ResourceSize(00002000h, ResourceIO) [Tree: curr. detect, result=80h] |
---|
387 | ResourceSize(00002000h, ResourceIO) [Tree: prev. detect, result=80h] |
---|
388 | ..207Fh |
---|
389 | System IRQ 11, INT# B |
---|
390 | New Capabilities List Present: |
---|
391 | Power Management Capability, Version 1.1 |
---|
392 | Does not support low power State D1 or D2 |
---|
393 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
394 | PME# signalling is currently disabled |
---|
395 | 3.3v AUX Current required : 375 mA |
---|
396 | Current Power State : D0 (Device operational, no power saving) |
---|
397 | |
---|
398 | Bus 0 (PCI Express), Device Number 31, Device Function 0 |
---|
399 | Vendor 8086h Intel Corporation |
---|
400 | Device 2641h 82801FBM (ICH6M) LPC Interface Bridge |
---|
401 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
402 | Status 0200h (Medium Timing) |
---|
403 | Revision 03h, Header Type 80h, Bus Latency Timer 00h |
---|
404 | Self test 00h (Self test not supported) |
---|
405 | PCI Class Bridge, type PCI to ISA |
---|
406 | Subsystem ID 05681014h Unknown |
---|
407 | Subsystem Vendor 1014h IBM |
---|
408 | |
---|
409 | Bus 0 (PCI Express), Device Number 31, Device Function 2 |
---|
410 | Vendor 8086h Intel Corporation |
---|
411 | Device 2653h 82801FBM (ICH6M) SATA Controller |
---|
412 | Command 0005h (I/O Access, BusMaster) |
---|
413 | Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz, |
---|
414 | Supports Back-To-Back Trans., Medium Timing) |
---|
415 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
416 | Self test 00h (Self test not supported) |
---|
417 | PCI Class Storage, type IDE (ATA) |
---|
418 | PCI EIDE Controller Features : |
---|
419 | BusMaster EIDE is supported |
---|
420 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
421 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
422 | Subsystem ID 056A1014h Unknown |
---|
423 | Subsystem Vendor 1014h IBM |
---|
424 | Address 0 is an I/O Port : 0000h (unconfigured) |
---|
425 | Address 1 is an I/O Port : 0000h (unconfigured) |
---|
426 | Address 2 is an I/O Port : 0000h (unconfigured) |
---|
427 | Address 3 is an I/O Port : 0000h (unconfigured) |
---|
428 | Address 4 is an I/O Port : 18C0h |
---|
429 | ResourceSize(000018C0h, ResourceIO) [Tree: physical , result=8h] |
---|
430 | ResourceSize(000018C0h, ResourceIO) [Tree: driver , result=10h] |
---|
431 | ResourceSize(000018C0h, ResourceIO) [Tree: curr. detect, result=10h] |
---|
432 | ResourceSize(000018C0h, ResourceIO) [Tree: prev. detect, result=10h] |
---|
433 | ..18CFh |
---|
434 | New Capabilities List Present: |
---|
435 | Power Management Capability, Version 1.1 |
---|
436 | Does not support low power State D1 or D2 |
---|
437 | Supports PME# signalling from mode(s) D3hot |
---|
438 | PME# signalling is currently disabled |
---|
439 | Current Power State : D0 (Device operational, no power saving) |
---|
440 | |
---|
441 | Bus 0 (PCI Express), Device Number 31, Device Function 3 |
---|
442 | Vendor 8086h Intel Corporation |
---|
443 | Device 266Ah 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller |
---|
444 | Command 0101h (I/O Access, System Errors) |
---|
445 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
446 | Revision 03h, Header Type 00h, Bus Latency Timer 00h |
---|
447 | Self test 00h (Self test not supported) |
---|
448 | PCI Class Serial, type SMBus Controller |
---|
449 | Subsystem ID 056B1014h Unknown |
---|
450 | Subsystem Vendor 1014h IBM |
---|
451 | Address 0 is not present or not configured! |
---|
452 | Address 1 is not present or not configured! |
---|
453 | Address 2 is not present or not configured! |
---|
454 | Address 3 is not present or not configured! |
---|
455 | Address 4 is an I/O Port : 18E0h |
---|
456 | ResourceSize(000018E0h, ResourceIO) [Tree: driver , result=20h] |
---|
457 | ResourceSize(000018E0h, ResourceIO) [Tree: curr. detect, result=20h] |
---|
458 | ResourceSize(000018E0h, ResourceIO) [Tree: prev. detect, result=20h] |
---|
459 | ..18FFh |
---|
460 | System IRQ 11, INT# A |
---|
461 | |
---|
462 | Bus 1 (AGP), Device Number 0, Device Function 0 |
---|
463 | Vendor 1002h ATI Technologies Inc |
---|
464 | Device 5460h M22 [Mobility Radeon X300] |
---|
465 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
466 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
467 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
468 | Self test 00h (Self test not supported) |
---|
469 | Cache line size 32 Bytes (8 DWords) |
---|
470 | PCI Class Display, type VGA |
---|
471 | Subsystem ID 056E1014h Unknown |
---|
472 | Subsystem Vendor 1014h IBM |
---|
473 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : C0000000h |
---|
474 | |
---|
475 | Address 1 is an I/O Port : 3000h |
---|
476 | ResourceSize(00003000h, ResourceIO) [Tree: driver , result=100h] |
---|
477 | ResourceSize(00003000h, ResourceIO) [Tree: curr. detect, result=100h] |
---|
478 | ResourceSize(00003000h, ResourceIO) [Tree: prev. detect, result=100h] |
---|
479 | ..30FFh |
---|
480 | Address 2 is a Memory Address (0-4GiB) : A8100000h |
---|
481 | |
---|
482 | System IRQ 11, INT# A |
---|
483 | Expansion ROM of 128 KiB decoded by this card, currently disabled |
---|
484 | New Capabilities List Present: |
---|
485 | Power Management Capability, Version 1.1 |
---|
486 | Supports low power State D1 |
---|
487 | Supports low power State D2 |
---|
488 | Does not support PME# signalling |
---|
489 | Current Power State : D0 (Device operational, no power saving) |
---|
490 | PCI Express Capability, Version 1 |
---|
491 | Device/Port Type : |
---|
492 | PCI Express Endpoint Device |
---|
493 | Device Capabilities : |
---|
494 | Unsupported Request Severity is Fatal |
---|
495 | Device Status : |
---|
496 | Link Capabilities : |
---|
497 | Maximum Link speed : 2.5Gb/s |
---|
498 | Maximum Link Width : x16 |
---|
499 | Link Port Number : 0 |
---|
500 | Link Control : |
---|
501 | Common Clock Configuration In Use |
---|
502 | Link Status : |
---|
503 | Current Link speed : 2.5Gb/s |
---|
504 | Current Link Width : x16 |
---|
505 | Message Signalled Interrupt Capability |
---|
506 | MSI is disabled |
---|
507 | MSI function can generate 64-bit addresses |
---|
508 | |
---|
509 | Bus 2 (PCI Express), Device Number 0, Device Function 0 |
---|
510 | Vendor 14E4h Broadcom Corporation |
---|
511 | Device 167Dh NetXtreme BCM5751M Gigabit Ethernet PCI Express |
---|
512 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
513 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
514 | Revision 11h, Header Type 00h, Bus Latency Timer 00h |
---|
515 | Self test 00h (Self test not supported) |
---|
516 | Cache line size 32 Bytes (8 DWords) |
---|
517 | PCI Class Network, type Ethernet |
---|
518 | Subsystem ID 05771014h ThinkPad Z60t |
---|
519 | Subsystem Vendor 1014h IBM |
---|
520 | Address 0 is a Memory Address (64-bit) : A8200000h |
---|
521 | |
---|
522 | CIS can read from expansion ROM image 0, offset 00h |
---|
523 | System IRQ 11, INT# A |
---|
524 | New Capabilities List Present: |
---|
525 | Power Management Capability, Version 1.1 |
---|
526 | Does not support low power State D1 or D2 |
---|
527 | Supports PME# signalling from mode(s) D3hot, D3cold |
---|
528 | PME# signalling is currently disabled |
---|
529 | Current Power State : D0 (Device operational, no power saving) |
---|
530 | 10000 mW D0 power consume |
---|
531 | 10000 mW D0 power dissipate |
---|
532 | 0 mW D1 power consume |
---|
533 | 0 mW D1 power dissipate |
---|
534 | 0 mW D2 power consume |
---|
535 | 0 mW D2 power dissipate |
---|
536 | 1000 mW D3 power consume |
---|
537 | 1000 mW D3 power dissipate |
---|
538 | 0 mW common logic power consume |
---|
539 | Vital Product Data Capability |
---|
540 | Identifier Broadcom NetXtreme Gigabit Ethernet Controller |
---|
541 | Part Number BCM95751M |
---|
542 | EC Level (Version) 106679-15 |
---|
543 | Serial Number 0123456789 |
---|
544 | Manufacturer ID 14e4 |
---|
545 | Checksum/End DAh 27*00h |
---|
546 | System Specific XYZ01234567 |
---|
547 | Remaining RW Area 107*00h |
---|
548 | End Tag |
---|
549 | Message Signalled Interrupt Capability |
---|
550 | MSI is disabled |
---|
551 | MSI function can generate 64-bit addresses |
---|
552 | PCI Express Capability, Version 1 |
---|
553 | Device/Port Type : |
---|
554 | PCI Express Endpoint Device |
---|
555 | Device Capabilities : |
---|
556 | Unsupported Request Severity is Non-Fatal |
---|
557 | Device Status : |
---|
558 | Non-Fatal Error Detected |
---|
559 | Unsupported Request Detected |
---|
560 | AUX Power Detected |
---|
561 | Link Capabilities : |
---|
562 | Maximum Link speed : 2.5Gb/s |
---|
563 | Maximum Link Width : x1 |
---|
564 | Link Port Number : 0 |
---|
565 | Link Control : |
---|
566 | Common Clock Configuration In Use |
---|
567 | Link Status : |
---|
568 | Current Link speed : 2.5Gb/s |
---|
569 | Current Link Width : x1 |
---|
570 | |
---|
571 | Bus 11 (PCI), Device Number 0, Device Function 0 |
---|
572 | Vendor 1180h Ricoh Co Ltd |
---|
573 | Device 0476h RL5c476 II |
---|
574 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
575 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
576 | Revision 8Dh, Header Type 82h, Bus Latency Timer 40h |
---|
577 | Self test 00h (Self test not supported) |
---|
578 | PCI Class Bridge, type PCI to Cardbus |
---|
579 | Subsystem ID 056C1014h ThinkPad Z60t |
---|
580 | Subsystem Vendor 1014h IBM |
---|
581 | System IRQ 11, INT# A |
---|
582 | CardBus Bridge Information: |
---|
583 | PCI Bus Number 11, CardBus Bus Number 12, Subordinate Bus number 14 |
---|
584 | CardBus Latency B0h |
---|
585 | Secondary Bus Command 0780h (ints routed by ExCA, write post enable) |
---|
586 | Secondary Bus Status 0200h (Medium Timing) |
---|
587 | Socket/ExCa Base Memory Address : AC000000h |
---|
588 | ResourceSize(AC000000h, ResourceMem) [Tree: physical , result=1000h] |
---|
589 | ResourceSize(AC000000h, ResourceMem) [Tree: driver , result=1000h] |
---|
590 | ..AC000FFFh |
---|
591 | Memory Range 0 : None |
---|
592 | Memory Range 1 : None |
---|
593 | I/O Port Range 0 : None |
---|
594 | I/O Port Range 1 : None |
---|
595 | New Capabilities List Present: |
---|
596 | Power Management Capability, Version 1.1 |
---|
597 | Supports low power State D1 |
---|
598 | Supports low power State D2 |
---|
599 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
600 | PME# signalling is currently disabled |
---|
601 | Current Power State : D0 (Device operational, no power saving) |
---|
602 | 360 mW D0 power consume |
---|
603 | 360 mW D0 power dissipate |
---|
604 | 320 mW D1 power consume |
---|
605 | 320 mW D1 power dissipate |
---|
606 | 10 mW D2 power consume |
---|
607 | 10 mW D2 power dissipate |
---|
608 | 10 mW D3 power consume |
---|
609 | 10 mW D3 power dissipate |
---|
610 | 0 mW common logic power consume |
---|
611 | |
---|
612 | Bus 11 (PCI), Device Number 2, Device Function 0 |
---|
613 | Vendor 8086h Intel Corporation |
---|
614 | Device 4224h PRO/Wireless 2915ABG [Calexico2] Network Connection |
---|
615 | Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors) |
---|
616 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
617 | Medium Timing) |
---|
618 | Revision 05h, Header Type 00h, Bus Latency Timer 40h |
---|
619 | Minimum Bus Grant 03h, Maximum Bus Latency 18h |
---|
620 | Self test 00h (Self test not supported) |
---|
621 | Cache line size 32 Bytes (8 DWords) |
---|
622 | PCI Class Network, type Other |
---|
623 | Subsystem ID 10108086h Unknown |
---|
624 | Subsystem Vendor 8086h Intel Corporation |
---|
625 | Address 0 is a Memory Address (0-4GiB) : AC001000h |
---|
626 | ResourceSize(AC001000h, ResourceMem) [Tree: physical , result=1000h] |
---|
627 | ResourceSize(AC001000h, ResourceMem) [Tree: driver , result=1000h] |
---|
628 | ..AC001FFFh |
---|
629 | System IRQ 11, INT# A |
---|
630 | New Capabilities List Present: |
---|
631 | Power Management Capability, Version 1.1 |
---|
632 | Does not support low power State D1 or D2 |
---|
633 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
634 | PME# signalling is currently disabled |
---|
635 | Current Power State : D0 (Device operational, no power saving) |
---|
636 | 1900 mW D0 power consume |
---|
637 | 1900 mW D0 power dissipate |
---|
638 | 1900 mW D1 power consume |
---|
639 | 1900 mW D1 power dissipate |
---|
640 | 1900 mW D2 power consume |
---|
641 | 1900 mW D2 power dissipate |
---|
642 | 100 mW D3 power consume |
---|
643 | 100 mW D3 power dissipate |
---|
644 | 0 mW common logic power consume |
---|
645 | |
---|
646 | Bus 11 (PCI), Device Number 3, Device Function 0 |
---|
647 | Vendor 104Ch Texas Instruments |
---|
648 | Device AC22h PCI2032 PCI Docking Bridge |
---|
649 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
650 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
651 | Revision 00h, Header Type 01h, Bus Latency Timer 40h |
---|
652 | Self test 00h (Self test not supported) |
---|
653 | Cache line size 32 Bytes (8 DWords) |
---|
654 | PCI Class Bridge, type PCI to PCI (Subtractive Decode) |
---|
655 | PCI Bridge Information: |
---|
656 | Primary Bus Number 11, Secondary Bus Number 18, Subordinate Bus number 24 |
---|
657 | Secondary Bus Command 0004h (ISA mapping) |
---|
658 | Secondary Bus Status 2200h (Received Master Abort, Medium Timing) |
---|
659 | Secondary Bus Latency 44h |
---|
660 | I/O Port Range Passed to Secondary Bus : 00000000h..00000FFFh (32-bit I/O space) |
---|
661 | Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh |
---|
662 | New Capabilities List Present: |
---|
663 | Power Management Capability, Version 1.0 |
---|
664 | Supports low power State D1 |
---|
665 | Supports low power State D2 |
---|
666 | Does not support PME# signalling |
---|
667 | Current Power State : D0 (Device operational, no power saving) |
---|
668 | |
---|
669 | Bus 18 (PCI), Device Number 1, Device Function 0 |
---|
670 | Vendor 1095h Silicon Image, Inc. |
---|
671 | Device 0648h PCI0648 |
---|
672 | Command 0105h (I/O Access, BusMaster, System Errors) |
---|
673 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
674 | Medium Timing) |
---|
675 | Revision 01h, Header Type 00h, Bus Latency Timer 40h |
---|
676 | Minimum Bus Grant 02h, Maximum Bus Latency 04h |
---|
677 | Self test 00h (Self test not supported) |
---|
678 | PCI Class Storage, type IDE (ATA) |
---|
679 | PCI EIDE Controller Features : |
---|
680 | BusMaster EIDE is supported |
---|
681 | Primary Channel is in native mode at Addresses 0 & 1 |
---|
682 | Secondary Channel is in native mode at Addresses 2 & 3 |
---|
683 | Subsystem ID 06481095h PCI-0648 UltraDMA66 EIDE Controller (Generic ID) |
---|
684 | Subsystem Vendor 1095h Silicon Image, Inc. |
---|
685 | Address 0 is an I/O Port : 9020h |
---|
686 | ResourceSize(00009020h, ResourceIO) [Tree: physical , result=8h] |
---|
687 | ResourceSize(00009020h, ResourceIO) [Tree: driver , result=8h] |
---|
688 | ..9027h |
---|
689 | Address 1 is an I/O Port : 9014h |
---|
690 | |
---|
691 | Address 2 is an I/O Port : 9018h |
---|
692 | |
---|
693 | Address 3 is an I/O Port : 9010h |
---|
694 | |
---|
695 | Address 4 is an I/O Port : 9000h |
---|
696 | ResourceSize(00009000h, ResourceIO) [Tree: physical , result=8h] |
---|
697 | ResourceSize(00009000h, ResourceIO) [Tree: driver , result=8h] |
---|
698 | ..9007h |
---|
699 | System IRQ 11, INT# A |
---|
700 | New Capabilities List Present: |
---|
701 | Power Management Capability, Version 1.0 |
---|
702 | Supports low power State D1 |
---|
703 | Supports low power State D2 |
---|
704 | Does not support PME# signalling |
---|
705 | Current Power State : D0 (Device operational, no power saving) |
---|
706 | 240 mW D0 power consume |
---|
707 | 240 mW D0 power dissipate |
---|
708 | 240 mW D1 power consume |
---|
709 | 240 mW D1 power dissipate |
---|
710 | 240 mW D2 power consume |
---|
711 | 240 mW D2 power dissipate |
---|
712 | 240 mW D3 power consume |
---|
713 | 240 mW D3 power dissipate |
---|
714 | 240 mW common logic power consume |
---|
715 | |
---|
716 | Bus 18 (PCI), Device Number 2, Device Function 0 |
---|
717 | Vendor 104Ch Texas Instruments |
---|
718 | Device AC51h PCI1420 PC card Cardbus Controller |
---|
719 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
720 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
721 | Revision 00h, Header Type 82h, Bus Latency Timer 40h |
---|
722 | Self test 00h (Self test not supported) |
---|
723 | Cache line size 32 Bytes (8 DWords) |
---|
724 | PCI Class Bridge, type PCI to Cardbus |
---|
725 | Subsystem ID 01481014h ThinkPad A20m |
---|
726 | Subsystem Vendor 1014h IBM |
---|
727 | System IRQ 11, INT# A |
---|
728 | CardBus Bridge Information: |
---|
729 | PCI Bus Number 18, CardBus Bus Number 19, Subordinate Bus number 21 |
---|
730 | CardBus Latency 80h |
---|
731 | Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA) |
---|
732 | Secondary Bus Status 0200h (Medium Timing) |
---|
733 | Socket/ExCa Base Memory Address : B8000000h |
---|
734 | ResourceSize(B8000000h, ResourceMem) [Tree: physical , result=1000h] |
---|
735 | ResourceSize(B8000000h, ResourceMem) [Tree: driver , result=1000h] |
---|
736 | ..B8000FFFh |
---|
737 | Memory Range 0 : None |
---|
738 | Memory Range 1 : None |
---|
739 | I/O Port Range 0 : None |
---|
740 | I/O Port Range 1 : None |
---|
741 | New Capabilities List Present: |
---|
742 | Power Management Capability, Version 1.0 |
---|
743 | Supports low power State D1 |
---|
744 | Supports low power State D2 |
---|
745 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
746 | PME# signalling is currently disabled |
---|
747 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
748 | Current Power State : D0 (Device operational, no power saving) |
---|
749 | |
---|
750 | Bus 18 (PCI), Device Number 2, Device Function 1 |
---|
751 | Vendor 104Ch Texas Instruments |
---|
752 | Device AC51h PCI1420 PC card Cardbus Controller |
---|
753 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
754 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
755 | Revision 00h, Header Type 82h, Bus Latency Timer 40h |
---|
756 | Self test 00h (Self test not supported) |
---|
757 | Cache line size 32 Bytes (8 DWords) |
---|
758 | PCI Class Bridge, type PCI to Cardbus |
---|
759 | Subsystem ID 01481014h ThinkPad A20m |
---|
760 | Subsystem Vendor 1014h IBM |
---|
761 | System IRQ 11, INT# A |
---|
762 | CardBus Bridge Information: |
---|
763 | PCI Bus Number 18, CardBus Bus Number 22, Subordinate Bus number 24 |
---|
764 | CardBus Latency 80h |
---|
765 | Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA) |
---|
766 | Secondary Bus Status 0200h (Medium Timing) |
---|
767 | Socket/ExCa Base Memory Address : B8001000h |
---|
768 | ResourceSize(B8001000h, ResourceMem) [Tree: physical , result=1000h] |
---|
769 | ResourceSize(B8001000h, ResourceMem) [Tree: driver , result=1000h] |
---|
770 | ..B8001FFFh |
---|
771 | Memory Range 0 : None |
---|
772 | Memory Range 1 : None |
---|
773 | I/O Port Range 0 : None |
---|
774 | I/O Port Range 1 : None |
---|
775 | New Capabilities List Present: |
---|
776 | Power Management Capability, Version 1.0 |
---|
777 | Supports low power State D1 |
---|
778 | Supports low power State D2 |
---|
779 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
780 | PME# signalling is currently disabled |
---|
781 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
782 | Current Power State : D0 (Device operational, no power saving) |
---|
783 | |
---|
784 | ROM PCI IRQ routing table Tests.... |
---|
785 | ROM IRQ routing table found at F000h:DEB0h |
---|
786 | Table Version 1.0 - OK |
---|
787 | Table size 256 bytes - OK |
---|
788 | Table Checksum E0h - OK |
---|
789 | PCI Interrupt Router: 82801FBM (ICH6M) LPC Interface Bridge |
---|
790 | IRQ's dedicated to PCI : None |
---|
791 | The ROM PCI IRQ routing table appears to be OK. |
---|
792 | |
---|
793 | IRQ Summary: IRQs 11,14,15 are used by PCI devices |
---|
794 | Shared IRQs: IRQ 11 is shared by 18 PCI Devices |
---|