Craig Hart's PCI+AGP bus sniffer, Version 1.06vkA, freeware made in 1996-2008.
Loaded Vendor Data : "This is version ha_merged, 13 Mar 2011 17:03:03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 25
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2590h Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 05751014h ThinkPad Z60t
 Subsystem Vendor 1014h IBM
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 1, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2591h Mobile 915GM/PM Express PCI Express Root Port
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 05781014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   Note: nonzero Secondary Bus Latency recommended!
   I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit I/O space)
   Memory   Range Passed to Secondary Bus : A8100000h..A81FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : C0000000h..C7FFFFFFh
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1014h
     SSID  : 0578h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 2
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16
     Slot Capabilities :
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2660h 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 System IRQ 11, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0004h (ISA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   Note: nonzero Secondary Bus Latency recommended!
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : A8200000h..A82FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       Correctable Error Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 0000h
     SSID  : 0000h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2664h 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 System IRQ 11, INT# C
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 10
   Secondary Bus Command 0004h (ISA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   Note: nonzero Secondary Bus Latency recommended!
   I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit I/O space)
   Memory   Range Passed to Secondary Bus : AA000000h..ABFFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : C8000000h..C80FFFFFh
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 3
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   6.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 0000h
     SSID  : 0000h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2658h 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 05651014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1800h
ResourceSize(00001800h, ResourceIO) [Tree: physical    ,  result=14h]
ResourceSize(00001800h, ResourceIO) [Tree: driver      ,  result=20h]
ResourceSize(00001800h, ResourceIO) [Tree: curr. detect,  result=20h]
ResourceSize(00001800h, ResourceIO) [Tree: prev. detect,  result=20h]
..181Fh
 System IRQ 11, INT# A

 Bus 0 (PCI Express), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2659h 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 05651014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1820h
ResourceSize(00001820h, ResourceIO) [Tree: physical    ,  result=14h]
ResourceSize(00001820h, ResourceIO) [Tree: driver      ,  result=20h]
ResourceSize(00001820h, ResourceIO) [Tree: curr. detect,  result=20h]
ResourceSize(00001820h, ResourceIO) [Tree: prev. detect,  result=20h]
..183Fh
 System IRQ 11, INT# B

 Bus 0 (PCI Express), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 265Ah 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 05651014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1840h
ResourceSize(00001840h, ResourceIO) [Tree: physical    ,  result=14h]
ResourceSize(00001840h, ResourceIO) [Tree: driver      ,  result=20h]
ResourceSize(00001840h, ResourceIO) [Tree: curr. detect,  result=20h]
ResourceSize(00001840h, ResourceIO) [Tree: prev. detect,  result=20h]
..185Fh
 System IRQ 11, INT# C

 Bus 0 (PCI Express), Device Number 29, Device Function 3
 Vendor 8086h Intel Corporation
 Device 265Bh 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 05651014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1860h
ResourceSize(00001860h, ResourceIO) [Tree: physical    ,  result=14h]
ResourceSize(00001860h, ResourceIO) [Tree: driver      ,  result=20h]
ResourceSize(00001860h, ResourceIO) [Tree: curr. detect,  result=20h]
ResourceSize(00001860h, ResourceIO) [Tree: prev. detect,  result=20h]
..187Fh
 System IRQ 11, INT# D

 Bus 0 (PCI Express), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 265Ch 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 05661014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : A8000000h
ResourceSize(A8000000h, ResourceMem) [Tree: physical    ,  result=100h]
ResourceSize(A8000000h, ResourceMem) [Tree: driver      ,  result=100h]
..A80000FFh
 System IRQ 11, INT# D
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI Express), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2448h 82801 Mobile PCI Bridge
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision D3h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 11, Subordinate Bus number 24
   Secondary Bus Command 0004h (ISA mapping)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 40h
   I/O Port Range Passed to Secondary Bus : 5000h..9FFFh (16-bit I/O space)
   Memory   Range Passed to Secondary Bus : AC000000h..B80FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : D0000000h..D7FFFFFFh
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 0000h
     SSID  : 0000h

 Bus 0 (PCI Express), Device Number 30, Device Function 2
 Vendor 8086h Intel Corporation
 Device 266Eh 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 05671014h SoundMAX Integrated Digital Audio (Guess Only!)
 Subsystem Vendor 1014h IBM
 Address 0 is an I/O Port : 1C00h
ResourceSize(00001C00h, ResourceIO) [Tree: physical    ,  result=100h]
ResourceSize(00001C00h, ResourceIO) [Tree: driver      ,  result=100h]
ResourceSize(00001C00h, ResourceIO) [Tree: curr. detect,  result=100h]
ResourceSize(00001C00h, ResourceIO) [Tree: prev. detect,  result=100h]
..1CFFh
 Address 1 is an I/O Port : 1880h
ResourceSize(00001880h, ResourceIO) [Tree: physical    ,  result=40h]
ResourceSize(00001880h, ResourceIO) [Tree: driver      ,  result=40h]
ResourceSize(00001880h, ResourceIO) [Tree: curr. detect,  result=40h]
ResourceSize(00001880h, ResourceIO) [Tree: prev. detect,  result=40h]
..18BFh
 Address 2 is a Memory Address (0-4GiB) : A8000800h
ResourceSize(A8000800h, ResourceMem) [Tree: physical    ,  result=200h]
ResourceSize(A8000800h, ResourceMem) [Tree: driver      ,  result=200h]
ResourceSize(A8000800h, ResourceMem) [Tree: curr. detect,  result=200h]
ResourceSize(A8000800h, ResourceMem) [Tree: prev. detect,  result=200h]
..A80009FFh
 Address 3 is a Memory Address (0-4GiB) : A8000400h
ResourceSize(A8000400h, ResourceMem) [Tree: physical    ,  result=100h]
ResourceSize(A8000400h, ResourceMem) [Tree: driver      ,  result=100h]
ResourceSize(A8000400h, ResourceMem) [Tree: curr. detect,  result=100h]
ResourceSize(A8000400h, ResourceMem) [Tree: prev. detect,  result=100h]
..A80004FFh
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 30, Device Function 3
 Vendor 8086h Intel Corporation
 Device 266Dh 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Simple Communication, type Hayes Compatible Modem
 Subsystem ID 05761014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is an I/O Port : 2400h
ResourceSize(00002400h, ResourceIO) [Tree: driver      ,  result=100h]
ResourceSize(00002400h, ResourceIO) [Tree: curr. detect,  result=100h]
ResourceSize(00002400h, ResourceIO) [Tree: prev. detect,  result=100h]
..24FFh
 Address 1 is an I/O Port : 2000h
ResourceSize(00002000h, ResourceIO) [Tree: driver      ,  result=80h]
ResourceSize(00002000h, ResourceIO) [Tree: curr. detect,  result=80h]
ResourceSize(00002000h, ResourceIO) [Tree: prev. detect,  result=80h]
..207Fh
 System IRQ 11, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2641h 82801FBM (ICH6M) LPC Interface Bridge
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0200h (Medium Timing)
 Revision 03h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 05681014h Unknown
 Subsystem Vendor 1014h IBM

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2653h 82801FBM (ICH6M) SATA Controller
 Command 0005h (I/O Access, BusMaster)
 Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 056A1014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is an I/O Port : 0000h (unconfigured)
 Address 1 is an I/O Port : 0000h (unconfigured)
 Address 2 is an I/O Port : 0000h (unconfigured)
 Address 3 is an I/O Port : 0000h (unconfigured)
 Address 4 is an I/O Port : 18C0h
ResourceSize(000018C0h, ResourceIO) [Tree: physical    ,  result=8h]
ResourceSize(000018C0h, ResourceIO) [Tree: driver      ,  result=10h]
ResourceSize(000018C0h, ResourceIO) [Tree: curr. detect,  result=10h]
ResourceSize(000018C0h, ResourceIO) [Tree: prev. detect,  result=10h]
..18CFh
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 266Ah 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
 Command 0101h (I/O Access, System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 056B1014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 18E0h
ResourceSize(000018E0h, ResourceIO) [Tree: driver      ,  result=20h]
ResourceSize(000018E0h, ResourceIO) [Tree: curr. detect,  result=20h]
ResourceSize(000018E0h, ResourceIO) [Tree: prev. detect,  result=20h]
..18FFh
 System IRQ 11, INT# A

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 1002h ATI Technologies Inc
 Device 5460h M22 [Mobility Radeon X300]
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 00h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Display, type VGA
 Subsystem ID 056E1014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : C0000000h

 Address 1 is an I/O Port : 3000h
ResourceSize(00003000h, ResourceIO) [Tree: driver      ,  result=100h]
ResourceSize(00003000h, ResourceIO) [Tree: curr. detect,  result=100h]
ResourceSize(00003000h, ResourceIO) [Tree: prev. detect,  result=100h]
..30FFh
 Address 2 is a Memory Address (0-4GiB) : A8100000h

 System IRQ 11, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses

 Bus 2 (PCI Express), Device Number 0, Device Function 0
 Vendor 14E4h Broadcom Corporation
 Device 167Dh NetXtreme BCM5751M Gigabit Ethernet PCI Express
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 11h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 05771014h ThinkPad Z60t
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (64-bit) : A8200000h

 CIS can read from expansion ROM image 0, offset 00h
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     Current Power State : D0 (Device operational, no power saving)
     10000 mW D0 power consume
     10000 mW D0 power dissipate
         0 mW D1 power consume
         0 mW D1 power dissipate
         0 mW D2 power consume
         0 mW D2 power dissipate
      1000 mW D3 power consume
      1000 mW D3 power dissipate
         0 mW common logic power consume
   Vital Product Data Capability
     Identifier          Broadcom NetXtreme Gigabit Ethernet Controller
     Part Number         BCM95751M
     EC Level (Version)  106679-15
     Serial Number       0123456789
     Manufacturer ID     14e4
     Checksum/End        DAh 27*00h 
     System Specific     XYZ01234567
     Remaining RW Area   107*00h 
     End Tag
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Non-Fatal
     Device Status :
       Non-Fatal Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 11 (PCI), Device Number 0, Device Function 0
 Vendor 1180h Ricoh Co Ltd
 Device 0476h RL5c476 II
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 8Dh, Header Type 82h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 056C1014h ThinkPad Z60t
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# A
 CardBus Bridge Information:
   PCI Bus Number 11, CardBus Bus Number 12, Subordinate Bus number 14
   CardBus Latency B0h
   Secondary Bus Command 0780h (ints routed by ExCA, write post enable)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : AC000000h
ResourceSize(AC000000h, ResourceMem) [Tree: physical    ,  result=1000h]
ResourceSize(AC000000h, ResourceMem) [Tree: driver      ,  result=1000h]
..AC000FFFh
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     Current Power State : D0 (Device operational, no power saving)
       360 mW D0 power consume
       360 mW D0 power dissipate
       320 mW D1 power consume
       320 mW D1 power dissipate
        10 mW D2 power consume
        10 mW D2 power dissipate
        10 mW D3 power consume
        10 mW D3 power dissipate
         0 mW common logic power consume

 Bus 11 (PCI), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 4224h PRO/Wireless 2915ABG [Calexico2] Network Connection
 Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 05h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 03h, Maximum Bus Latency 18h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Other
 Subsystem ID 10108086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : AC001000h
ResourceSize(AC001000h, ResourceMem) [Tree: physical    ,  result=1000h]
ResourceSize(AC001000h, ResourceMem) [Tree: driver      ,  result=1000h]
..AC001FFFh
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     Current Power State : D0 (Device operational, no power saving)
      1900 mW D0 power consume
      1900 mW D0 power dissipate
      1900 mW D1 power consume
      1900 mW D1 power dissipate
      1900 mW D2 power consume
      1900 mW D2 power dissipate
       100 mW D3 power consume
       100 mW D3 power dissipate
         0 mW common logic power consume

 Bus 11 (PCI), Device Number 3, Device Function 0
 Vendor 104Ch Texas Instruments
 Device AC22h PCI2032 PCI Docking Bridge
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 00h, Header Type 01h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 PCI Bridge Information:
   Primary Bus Number 11, Secondary Bus Number 18, Subordinate Bus number 24
   Secondary Bus Command 0004h (ISA mapping)
   Secondary Bus Status  2200h (Received Master Abort, Medium Timing)
   Secondary Bus Latency 44h
   I/O Port Range Passed to Secondary Bus : 00000000h..00000FFFh (32-bit I/O space)
   Memory   Range Passed to Secondary Bus : 00000000h..000FFFFFh
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 18 (PCI), Device Number 1, Device Function 0
 Vendor 1095h Silicon Image, Inc.
 Device 0648h PCI0648
 Command 0105h (I/O Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 02h, Maximum Bus Latency 04h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 06481095h PCI-0648 UltraDMA66 EIDE Controller (Generic ID)
 Subsystem Vendor 1095h Silicon Image, Inc.
 Address 0 is an I/O Port : 9020h
ResourceSize(00009020h, ResourceIO) [Tree: physical    ,  result=8h]
ResourceSize(00009020h, ResourceIO) [Tree: driver      ,  result=8h]
..9027h
 Address 1 is an I/O Port : 9014h

 Address 2 is an I/O Port : 9018h

 Address 3 is an I/O Port : 9010h

 Address 4 is an I/O Port : 9000h
ResourceSize(00009000h, ResourceIO) [Tree: physical    ,  result=8h]
ResourceSize(00009000h, ResourceIO) [Tree: driver      ,  result=8h]
..9007h
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
       240 mW D0 power consume
       240 mW D0 power dissipate
       240 mW D1 power consume
       240 mW D1 power dissipate
       240 mW D2 power consume
       240 mW D2 power dissipate
       240 mW D3 power consume
       240 mW D3 power dissipate
       240 mW common logic power consume

 Bus 18 (PCI), Device Number 2, Device Function 0
 Vendor 104Ch Texas Instruments
 Device AC51h PCI1420 PC card Cardbus Controller
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 00h, Header Type 82h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 01481014h ThinkPad A20m
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# A
 CardBus Bridge Information:
   PCI Bus Number 18, CardBus Bus Number 19, Subordinate Bus number 21
   CardBus Latency 80h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : B8000000h
ResourceSize(B8000000h, ResourceMem) [Tree: physical    ,  result=1000h]
ResourceSize(B8000000h, ResourceMem) [Tree: driver      ,  result=1000h]
..B8000FFFh
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 18 (PCI), Device Number 2, Device Function 1
 Vendor 104Ch Texas Instruments
 Device AC51h PCI1420 PC card Cardbus Controller
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 00h, Header Type 82h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 01481014h ThinkPad A20m
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# A
 CardBus Bridge Information:
   PCI Bus Number 18, CardBus Bus Number 22, Subordinate Bus number 24
   CardBus Latency 80h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : B8001000h
ResourceSize(B8001000h, ResourceMem) [Tree: physical    ,  result=1000h]
ResourceSize(B8001000h, ResourceMem) [Tree: driver      ,  result=1000h]
..B8001FFFh
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:DEB0h
 Table Version 1.0 - OK
 Table size 256 bytes - OK
 Table Checksum E0h - OK
 PCI Interrupt Router: 82801FBM (ICH6M) LPC Interface Bridge
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 11,14,15 are used by PCI devices
Shared IRQs: IRQ 11 is shared by 18 PCI Devices