Opened 17 years ago
Last modified 17 years ago
#67 closed defect
No sound On Crystal AC'97 with Uniaud RC3, previous version OK — at Version 14
| Reported by: | Steve Wendt | Owned by: | Yoda |
|---|---|---|---|
| Priority: | normal | Milestone: | Stabilization |
| Component: | UNIAUD32 | Version: | 1.1.4 |
| Severity: | normal | Keywords: | |
| Cc: | Yoda |
Description (last modified by )
Uniaud RC3 produces no sound on my ACP2 system with a Crystal-based sound card. System sounds, PM123 and WVGui are all silent. The previous version of Uniaud, which works well, identifies itself as RC2 at boot time. I can provide logs for the previous version if required. Logs for RC3 are attached.
Regards
Sid Gale (sid <at> the-gales.com)
Change History (18)
by , 17 years ago
| Attachment: | debuginfo.zip added |
|---|
comment:1 by , 17 years ago
| Milestone: | → 1.1.4GA |
|---|---|
| Owner: | set to |
| Severity: | normal → blocker |
| Status: | new → assigned |
| Version: | → 1.1.4 |
by , 17 years ago
| Attachment: | 16rc3_32rc2.zip added |
|---|
comment:2 by , 17 years ago
Are you trying WvGui? using UNIAUD API ?
Yes, and the DART API is also silent.
Please try using UNIAUD16 RC2 with UNIAUD32 RC3
uniaud16 rc2 + uniaud32 rc3 = no sound uniaud16 rc3 + uniaud32 rc2 = sound - logs attached.
comment:3 by , 17 years ago
| Cc: | added |
|---|---|
| Priority: | normal → highest |
Quite a surprice
Please try this version:
ftp://ftp.ecomstation.dk/uniaud32_114RC3W4.zip
Please send UniInfo for that, and tell us which OS and version you use
and kernel rev
by , 17 years ago
| Attachment: | w4info.zip added |
|---|
comment:4 by , 17 years ago
RC3W4 version does not produce sound, logs attached. [The new Resync0.9.5 version also fails to produce sound.]
OS is Warp Server for eBusiness (ACP2) with fixpak 5 but with the pre-fixpak version of pmmerge.dll. Kernel is 14.103a_uni.
comment:5 by , 17 years ago
No change with Uniaud114 RC4. As with RC3, RC4 uniaud16.sys + RC2 uniaud32.sys produces sound but any other combination which has an RC4 component doesn't. I can provide logs if you want them.
comment:6 by , 17 years ago
Give us logs from this version:
ftp://ftp.ecomstation.dk/ac97-1.zip[[BR]]
It is a debug version, which can give us some more info. (no fixes in it)
follow-up: 9 comment:7 by , 17 years ago
I am having a similar problem with RC4. I have no sounds at all. This is on eCS 1.2R running with SMP on dual PIIIs and with eCS 1.2R on a T42. Sound was working fine on both systems. I have gone back to RC3 and RC2 on the SMP machine with no success. I have the logs available for all 3 versions.
I really suspect that the culprit is something besides Uniaud, but I have no idea where to look.
Chuck McKinnis
comment:8 by , 17 years ago
Chuck, I just had problems with sound on my T42 where I had no sound after testing ACPI 3.05. I went back to APM and still no sound, I then changed back to an experimental uniaud I had built and was using before testing the latest uniaud release candidate and no sound despite no errors on boot. I played with the mixer to make sure the sound was not just turned off and even Warpvision with uniaud didn't make sound. Finally I fixed my windows boot and booted into windows where I did have sound and now have sound in eCS again. If you have a windows partition on one of the machines then windows may initialize something that we are not currently initializing.
comment:9 by , 17 years ago
Hi Chuck...
I am having a similar problem with RC4. I have no sounds at all. This is on eCS 1.2R running with SMP on dual PIIIs and with eCS 1.2R on a T42. Sound was working fine on both systems. I have gone back to RC3 and RC2 on the SMP machine with no success. I have the logs available for all 3 versions.
Is this anyway related to same hardware as reported here ? It is fine to report about same problms on equal hardware; but if yours are even slightly different, please open a new Ticket.
I really suspect that the culprit is something besides Uniaud, but I have no idea where to look.
Chuck McKinnis
Create a new ticket, and attach your logs - that will help
by , 17 years ago
| Attachment: | ac97-1debuginfo.zip added |
|---|
comment:11 by , 17 years ago
With Paul Smedley's alsa resync 1.0.3 I get sound on my Crystal-based card (with the other uniaud components from RC4). I'm waiting for the release of the "official" 1.0.2 to see if that works, too.
Regards
Sid Gale
comment:12 by , 17 years ago
RC5 gives me sound with my Crystal-based card. After a suspend/resume there is no longer sound (but that's been a problem for a long time). That's not an issue for me, as I rarely use suspend/resume, but I'm aware that it is for some.
Regards, and thanks for all the work
Sid Gale
comment:13 by , 17 years ago
| Resolution: | → fixed |
|---|---|
| Status: | assigned → closed |
| Version: | 1.1.4 → 1.1.4RC5 |
You can open another ticket for the APM issues, as they belong to another milestone.
comment:14 by , 17 years ago
| Description: | modified (diff) |
|---|---|
| Priority: | highest → normal |
| Resolution: | fixed |
| Severity: | blocker → normal |
| Status: | closed → reopened |
| Summary: | No sound from Uniaud RC3, previous version OK → No sound On Crystal AC'97 with Uniaud RC3, previous version OK |
| Version: | 1.1.4RC5 → 1.1.4 |
Are you trying WvGui using UNIAUD API ?
Please try using UNIAUD16 RC2 with UNIAUD32 RC3
If this doesn't work, try other combinations.
Send UniInfo from the combination, that works.