Opened 12 years ago

Closed 12 years ago

#67 closed defect (fixed)

No sound On Crystal AC'97 with Uniaud RC3, previous version OK

Reported by: guest Owned by: gentux2
Priority: normal Milestone: Stabilization
Component: UNIAUD32 Version: 1.1.4
Severity: normal Keywords:
Cc: yoda

Description (last modified by gentux2)

Uniaud RC3 produces no sound on my ACP2 system with a Crystal-based sound card. System sounds, PM123 and WVGui are all silent. The previous version of Uniaud, which works well, identifies itself as RC2 at boot time. I can provide logs for the previous version if required. Logs for RC3 are attached.

Regards

Sid Gale (sid <at> the-gales.com)

Attachments (4)

debuginfo.zip (7.2 KB) - added by guest 12 years ago.
16rc3_32rc2.zip (6.5 KB) - added by guest 12 years ago.
w4info.zip (6.6 KB) - added by guest 12 years ago.
ac97-1debuginfo.zip (8.6 KB) - added by guest 12 years ago.

Download all attachments as: .zip

Change History (20)

Changed 12 years ago by guest

comment:1 in reply to: ↑ description Changed 12 years ago by yoda

  • Milestone set to 1.1.4GA
  • Owner set to yoda
  • Severity changed from normal to blocker
  • Status changed from new to assigned
  • Version set to 1.1.4

Uniaud RC3 produces no sound on my ACP2 system with a Crystal-based sound.
WVGui are all silent.

Are you trying WvGui? using UNIAUD API ?

The previous version of Uniaud, which works well, identifies itself as RC2
at boot time. I can provide logs for the previous version if required.

Please try using UNIAUD16 RC2 with UNIAUD32 RC3

If this doesn't work, try other combinations.

Send UniInfo? from the combination, that works.

Changed 12 years ago by guest

comment:2 Changed 12 years ago by guest

Are you trying WvGui?? using UNIAUD API ?

Yes, and the DART API is also silent.

Please try using UNIAUD16 RC2 with UNIAUD32 RC3

uniaud16 rc2 + uniaud32 rc3 = no sound uniaud16 rc3 + uniaud32 rc2 = sound - logs attached.

comment:3 Changed 12 years ago by yoda

  • Cc yoda added
  • Priority changed from normal to highest

Quite a surprice

Please try this version: ftp://ftp.ecomstation.dk/uniaud32_114RC3W4.zip

Please send UniInfo? for that, and tell us which OS and version you use
and kernel rev

Changed 12 years ago by guest

comment:4 Changed 12 years ago by guest

RC3W4 version does not produce sound, logs attached. [The new Resync0.9.5 version also fails to produce sound.]

OS is Warp Server for eBusiness (ACP2) with fixpak 5 but with the pre-fixpak version of pmmerge.dll. Kernel is 14.103a_uni.

comment:5 Changed 12 years ago by guest

No change with Uniaud114 RC4. As with RC3, RC4 uniaud16.sys + RC2 uniaud32.sys produces sound but any other combination which has an RC4 component doesn't. I can provide logs if you want them.

comment:6 Changed 12 years ago by yoda

Give us logs from this version:

ftp://ftp.ecomstation.dk/ac97-1.zip[[BR]]

It is a debug version, which can give us some more info. (no fixes in it)

comment:7 follow-up: Changed 12 years ago by guest

I am having a similar problem with RC4. I have no sounds at all. This is on eCS 1.2R running with SMP on dual PIIIs and with eCS 1.2R on a T42. Sound was working fine on both systems. I have gone back to RC3 and RC2 on the SMP machine with no success. I have the logs available for all 3 versions.

I really suspect that the culprit is something besides Uniaud, but I have no idea where to look.

Chuck McKinnis?

comment:8 Changed 12 years ago by abwillis

Chuck, I just had problems with sound on my T42 where I had no sound after testing ACPI 3.05. I went back to APM and still no sound, I then changed back to an experimental uniaud I had built and was using before testing the latest uniaud release candidate and no sound despite no errors on boot. I played with the mixer to make sure the sound was not just turned off and even Warpvision with uniaud didn't make sound. Finally I fixed my windows boot and booted into windows where I did have sound and now have sound in eCS again. If you have a windows partition on one of the machines then windows may initialize something that we are not currently initializing.

comment:9 in reply to: ↑ 7 Changed 12 years ago by yoda

Hi Chuck...

I am having a similar problem with RC4. I have no sounds at all. This is on eCS 1.2R running with SMP on dual PIIIs and with eCS 1.2R on a T42. Sound was working fine on both systems. I have gone back to RC3 and RC2 on the SMP machine with no success. I have the logs available for all 3 versions.

Is this anyway related to same hardware as reported here ? It is fine to report about same problms on equal hardware; but if yours are even slightly different, please open a new Ticket.

I really suspect that the culprit is something besides Uniaud, but I have no idea where to look.

Chuck McKinnis?

Create a new ticket, and attach your logs - that will help

Changed 12 years ago by guest

comment:10 Changed 12 years ago by guest

Log from ac97-1.zip version attached.

Regards

Sid Gale

comment:11 Changed 12 years ago by guest

With Paul Smedley's alsa resync 1.0.3 I get sound on my Crystal-based card (with the other uniaud components from RC4). I'm waiting for the release of the "official" 1.0.2 to see if that works, too.

Regards

Sid Gale

comment:12 Changed 12 years ago by guest

RC5 gives me sound with my Crystal-based card. After a suspend/resume there is no longer sound (but that's been a problem for a long time). That's not an issue for me, as I rarely use suspend/resume, but I'm aware that it is for some.

Regards, and thanks for all the work

Sid Gale

comment:13 Changed 12 years ago by yoda

  • Resolution set to fixed
  • Status changed from assigned to closed
  • Version changed from 1.1.4 to 1.1.4RC5

You can open another ticket for the APM issues, as they belong to another milestone.

comment:14 Changed 12 years ago by gentux2

  • Description modified (diff)
  • Priority changed from highest to normal
  • Resolution fixed deleted
  • Severity changed from blocker to normal
  • Status changed from closed to reopened
  • Summary changed from No sound from Uniaud RC3, previous version OK to No sound On Crystal AC'97 with Uniaud RC3, previous version OK
  • Version changed from 1.1.4RC5 to 1.1.4

comment:15 Changed 12 years ago by gentux2

  • Owner changed from yoda to gentux2
  • Status changed from reopened to new

comment:16 Changed 12 years ago by gentux2

  • Resolution set to fixed
  • Status changed from new to closed

Sorry, but I fixed this one. Confirmed fixed in 1.1.4RC5.

Note: See TracTickets for help on using tickets.