Custom Query (242 matches)
Results (7 - 9 of 242)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#8 | duplicate | uniaud1.1.4rc1 and TRAP0008 before start of WPS | ||
Description |
uniaud1.1.4rc1 and TRAP0008 before start of WPS TRAP0008 ERRCD=0000 ERACC= ERLIM= EAX=000037D( EBX=FA6F700C ECX=000047E/ EDX=FA6F7048 ESI=00000000 EDI=F364EE54 EBP=FA6F7004 FLG=00053046 CS:EIP=0168:F369E057 CSACC=C09B CSLIM=FFFFFFFF SS:ESP=1558:FA6F7000 SSACC=C093 CSLIM=FFFFFFFF DS=0160 DSACC=C0F3 DSLIM=FFFFFFFF CR0=8001001B ES=0160 ESACC=C0F3 ESLIM=FFFFFFFF CR2=FA6F6FFC FS=0000 FSACC= FSLIM= GS=0000 GSACC= GSLIM= ##0168:FFF1E2AB - 000E:C2AB 60000, 9084 0886090F Internal revision 14.104a_W4 In BIOS ACPI is enabled (ACPI Controller IRQ9). (same TRAP0008 with ACPI disabled), no "ACPI driver" The "Multimedia Device" ac97/ALC202A has IRQ15. (same TRAP0008 with changing IRQ in BIOS) OS is MCP2+FP5, Kernel 14.104a_W4. (same TRAP0008 with Kernel 14.104a_UNI) Intel chipset 875P/6300ESB Graphic card Matrox P650, no WarpOverlay? installed. CONFIG.SYS ends with: DEVICE=C:\MMOS2\UNIAUD32.SYS /V DEVICE=C:\MMOS2\UNIAUD16.SYS /V DEVICE=D:\EMPEROARTV\IVAC.SYS REM * IBM VoiceType? * SET SPCH_RUN=C:\VT\SPCH_RUN SET SPCH_RO=C:\VT\SPCH_RO SET SPCH_RW=C:\VT\SPCH_RW SET SPCH_BIN=C:\VT\SPCH_BIN SET SPCH_PATH=C:\VT\SPCH_RO\LANGS\%L\POOLS SET SPCH_TRN=C:\VT\SPCH_BSF DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP SET VIDEO_DEVICES=VIO_SVGA SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA) DEVICE=C:\OS2\MDOS\VSVGA.SYS SET GRADD_CHAINS=C1 DEVICE=C:\OS2\GRADD.SYS DEVICE=C:\OS2\MDOS\VMANWIN.SYS SET GREEXT=SDDGREXT SET C1=SDDGRADD DEVICE=C:\OS2\SDDHELP.SYS /Q all-SCSI system with SCSI HBA LSI20320 (PCI-X slot, IRQ9 not changeable) HD1 (SCSI id0) HPFS formatted HD2 (SCSI id1) JFS formatted HD3 (SCSI id2) JFS formatted TRAP0008 comes with 1st disk access of HD2/HD3 |
|||
#86 | fixed | Similar to ticket 37 except with a crystal 4614 card. No sound on RC2, RC3 and now RC4. | ||
Description |
RC1 is the last to produce sound but has no sound after suspend/resume. Attaching 2 debuginfos. DebuginfoRC1Good.zip is from RC1. DebuginfoRC4NoGood.zip is from RC4. In the RC4 alsahlp.log there is many entries saying "Device not in proper state". So ends my help here !! |
|||
#233 | too-old | No audio out of MPLAYER at this driver level | ||
Description |
MPLAYER produces numerous error messages and will NOT produce audio when using this level of UNIAUD but, MPLAYER is not your problem so, I didn't include the messages. This level DOES solve an annoying problem with Klondike Solitaire. At lower driver levels, generating an error "beep" by, as an example, using the wrong Pull-Down, causes ALL audio to go away and, I usually have to re-boot. |