Custom Query (242 matches)

UNIAUD 1.1.4 RC1 works fine with the SBLive 5.1 PCI cards and the Intel 915GAV motherboard. But though it appears to find the card and UNIMIXPM shows the same screen on the Intel 945GTP motherboards, there is no audio at all on them.

UNIAUD 1.1.4 RC1 does not work at all with the SB Audigy SE PCI cards on either the Intel 915GAV or 945GTP motherboards.

UNIAUD 1.1.4 RC1 does not work at all with the on-board Intel 82801 High Definition Audio Controller on the Intel 915GAV motherboard or the Intel 82801GB I/O CONTROLLER Hub High Definition Audio on the Intel 945GTP motherboard.

I used the 109 level master intaller and adding the 1.1.4 RC1 component releases to it, then performed a "0" level install and then a "1" level install each time. I then got a full log with 'copy alsahlp$ uniaud.log' for each motherboard test. I then renamed that log file produced for the six requested log files. They are as follows:

5-15-06 2:35p 3857 0 UNIAUD_AUD_915_BAD.LOG 5-15-06 11:02p 3226 0 UNIAUD_AUD_945_BAD.LOG 5-15-06 2:35p 1567 0 UNIAUD_INT_915_BAD.LOG 5-15-06 11:02p 1381 0 UNIAUD_INT_945_BAD.LOG 5-15-06 2:35p 5116 0 UNIAUD_SB5_915_GUD.LOG 5-15-06 11:02p 4107 0 UNIAUD_SB5_945_BAD.LOG

This includes the log file from the one fully working SBLive 5.1 card in the Intel 915GAV system. It is marked as 'GUD' in the log file names cited above. The file names should clearly and simply identify the motherboard version, the card type as 'AUD' for the Audigy card, 'INT' for the on-board Intel audio chipsets for the 915 and 945 motherboards, as well as 'SB5' for the SBLive 5.1 card use.

In each case, the Intel BIOS settings were such that for any PCI installation of a sound card, the on-board Audio was turned off completely. For tests with Intel on-board audio, there was no sound card plugged into any PCI slot, as well as the BIOS settings were set to enable on-board audio. It makes no difference if legacy front panel audio is enabled or not for the Intel on-board audio in this case. There is still no sound at all from any such enabled system.

Rather than post the long log files here, as this is my first help ticket request, I will try to attach a single file, named UNIAUD_LOG.ZIP with the complete individual above files archived in it. If needed, I can send this file to you, Vladest separately attached to an Email.

I believe the most valuable effort which could be made would be to solve the Intel on-board audio chipset problems first, if possible. Then the SB Audigy card issues, in that the SBLive 5.1 cards are now non-production Creative items. If any of this can be done. We are told Intel is focusing on the 945 series boards now. They work fine with OS/2 MCP2 and the SNAP video toolset. I have a formal request in to Intel to fix their PRO/100-1000 network drivers for OS/2 to get that working on the 945 series NIC's. If the onboard audio problems could be solved, the OS/2 community could have a serious couple year ahead solution of OS/2 and eCs work, I would think.

Thank you for your work and time.

The card seems to be properly detected. A beep is heard when the Uniaud16.sys is loaded. Here's the content of ALSAHLP$:

SS32_Initialize. Start addrees: EE9DE000 OSS32_Initialize1 force card: -1 RMCreateDriver rc = 0 found: 10de, id: 26c idx 0 pci_enable_device ee98f2b4 get_free_dma_pages failed, trying wasteful method instead get_free_dma_pages failed, trying wasteful method instead get_free_dma_pages failed, trying wasteful method instead snd_device_register_all ee935e64 RMCreateAdapter rc = 0 RMCreateDevice rc = 0 00-00: AD198x Analog : AD198x Analog

: playback 1 : capture 1

00-01: AD198x Digital : AD198x Digital

: playback 1

snd_pcm_open card: 0, dev: 16 snd_pcm_open_file f9c988a6 OSS32_WaveOpen. streamid ee939ad0 chan: from 2 to 6 Found phandle for closing: ee939ad0 reuse flag: 0 OSS32_WaveClose. streamid ee939ad0 snd_pcm_open card: 0, dev: 24 snd_pcm_open_file f9c988a6 OSS32_WaveOpen. streamid ee939ad0 chan: from 2 to 2 Found phandle for closing: ee939ad0 reuse flag: 0 OSS32_WaveClose. streamid ee939ad0 snd_pcm_open card: 0, dev: 17 snd_pcm_open_file f9c988a6 OSS32_WaveOpen. streamid ee939ad0 chan: from 2 to 2 Found phandle for closing: ee939ad0 reuse flag: 0 OSS32_WaveClose. streamid ee939ad0 OSS32_WaveOpen: open error: -19 GetUniaudPcmCaps?: wave open error 3 REC at pcm 1 snd_pcm_open card: 0, dev: 16 snd_pcm_open_file f9c98ccc OSS32_WaveOpen. streamid ee939ad0 Device name: AD198x Analog rate flags: fe Found phandle for closing: ee939ad0 reuse flag: 0 OSS32_WaveClose. streamid ee939ad0 snd_pcm_open card: 0, dev: 24 snd_pcm_open_file f9c98ccc OSS32_WaveOpen. streamid ee939ad0 Device name: AD198x Analog rate flags: fe Found phandle for closing: ee939ad0 reuse flag: 0 OSS32_WaveClose. streamid ee939ad0 OSS32_STREAM_MPU401_MIDIOUT Midi Open 2 failed with error -19 OSS32_STREAM_MPU401_MIDIIN Midi Open 3 failed with error -19 OSS32_STREAM_FM_MIDIOUT Opened MIDI ee939ad0 Get client id failed with error -6 OSS32_STREAM_WAVETABLE_MIDIOUT: TODO

Since ALSA complitely moved from CVS, there is some time going work for applying latest patches for drivers part of uniaud from ALSA tree Due to mostly hand maded work it will takes some time

This ticket opened for reporting progress