| 1 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
|
|---|
| 2 | Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."
|
|---|
| 3 |
|
|---|
| 4 | PCI BIOS Version 2.10 found!
|
|---|
| 5 | Number of PCI Busses : 2
|
|---|
| 6 | PCI Characteristics : Config Mechanism 1
|
|---|
| 7 |
|
|---|
| 8 | Searching for PCI Devices using the OEMHLP$ driver
|
|---|
| 9 |
|
|---|
| 10 | Bus 0 (PCI), Device Number 0, Device Function 0
|
|---|
| 11 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 12 | Device 0735h SiS735 CPU to PCI Bridge
|
|---|
| 13 | Command 0007h (I/O Access, Memory Access, BusMaster)
|
|---|
| 14 | Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing)
|
|---|
| 15 | Revision 01h, Header Type 80h, Bus Latency Timer 20h
|
|---|
| 16 | Self test 00h (Self test not supported)
|
|---|
| 17 | PCI Class Bridge, type PCI to HOST
|
|---|
| 18 | Address 0 is a Memory Address (0-4GiB) : D0000000h..D3FFFFFFh
|
|---|
| 19 | New Capabilities List Present:
|
|---|
| 20 | AGP Capability, Version 2.0 (AGP 4x and below support)
|
|---|
| 21 | AGP Speed(s) Supported : 1x 2x 4x
|
|---|
| 22 | FW Transfers Supported : No
|
|---|
| 23 | >4GiB Address Space Supported : No
|
|---|
| 24 | Sideband Addressing Supported : Yes
|
|---|
| 25 | Maximum Command Queue Length : 32 bytes
|
|---|
| 26 | AGP Speed Selected : 4x
|
|---|
| 27 | FW Transfers Enabled : No
|
|---|
| 28 | >4GiB Address Space Enabled : No
|
|---|
| 29 | AGP Enabled : Yes
|
|---|
| 30 | Sideband Addressing Enabled : No
|
|---|
| 31 | Current Command Queue Length : 1 byte
|
|---|
| 32 |
|
|---|
| 33 | Bus 0 (PCI), Device Number 1, Device Function 0
|
|---|
| 34 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 35 | Device 0001h Virtual PCI to PCI Bridge
|
|---|
| 36 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
|
|---|
| 37 | Status 0000h
|
|---|
| 38 | Revision 00h, Header Type 01h, Bus Latency Timer 40h
|
|---|
| 39 | Self test 00h (Self test not supported)
|
|---|
| 40 | PCI Class Bridge, type PCI to PCI
|
|---|
| 41 | PCI Bridge Information:
|
|---|
| 42 | Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
|
|---|
| 43 | Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
|
|---|
| 44 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
|
|---|
| 45 | Secondary Bus Latency 40h
|
|---|
| 46 | I/O Port Range Passed to Secondary Bus : None
|
|---|
| 47 | Memory Range Passed to Secondary Bus : CDE00000h..CFEFFFFFh
|
|---|
| 48 | Prefetchable Memory Range Passed to Secondary Bus : C5B00000h..CDCFFFFFh
|
|---|
| 49 |
|
|---|
| 50 | Bus 0 (PCI), Device Number 2, Device Function 0
|
|---|
| 51 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 52 | Device 0008h SiS PCI to ISA Bridge (LPC Bridge)
|
|---|
| 53 | Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
|
|---|
| 54 | Status 0200h (Medium Timing)
|
|---|
| 55 | Revision 00h, Header Type 80h, Bus Latency Timer 00h
|
|---|
| 56 | Self test 00h (Self test not supported)
|
|---|
| 57 | PCI Class Bridge, type PCI to ISA
|
|---|
| 58 |
|
|---|
| 59 | Bus 0 (PCI), Device Number 2, Device Function 2
|
|---|
| 60 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 61 | Device 7001h SiS5597/8 Universal Serial Bus Controller
|
|---|
| 62 | Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
|
|---|
| 63 | System Errors)
|
|---|
| 64 | Status 0280h (Supports Back-To-Back Trans., Medium Timing)
|
|---|
| 65 | Revision 07h, Header Type 00h, Bus Latency Timer 40h
|
|---|
| 66 | Minimum Bus Grant 00h, Maximum Bus Latency 50h
|
|---|
| 67 | Self test 00h (Self test not supported)
|
|---|
| 68 | Cache line size 32 Bytes (8 DWords)
|
|---|
| 69 | PCI Class Serial, type USB (OHCI)
|
|---|
| 70 | Subsystem ID 70011039h SiS5597/8 Universal Serial Bus Controller (Generic ID)
|
|---|
| 71 | Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 72 | Address 0 is a Memory Address (0-4GiB) : CFFFE000h..CFFFEFFFh
|
|---|
| 73 | System IRQ 10, INT# D
|
|---|
| 74 |
|
|---|
| 75 | Bus 0 (PCI), Device Number 2, Device Function 3
|
|---|
| 76 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 77 | Device 7001h SiS5597/8 Universal Serial Bus Controller
|
|---|
| 78 | Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
|
|---|
| 79 | System Errors)
|
|---|
| 80 | Status 0280h (Supports Back-To-Back Trans., Medium Timing)
|
|---|
| 81 | Revision 07h, Header Type 00h, Bus Latency Timer 40h
|
|---|
| 82 | Minimum Bus Grant 00h, Maximum Bus Latency 50h
|
|---|
| 83 | Self test 00h (Self test not supported)
|
|---|
| 84 | Cache line size 32 Bytes (8 DWords)
|
|---|
| 85 | PCI Class Serial, type USB (OHCI)
|
|---|
| 86 | Subsystem ID 70011039h SiS5597/8 Universal Serial Bus Controller (Generic ID)
|
|---|
| 87 | Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 88 | Address 0 is a Memory Address (0-4GiB) : CFFFF000h..CFFFFFFFh
|
|---|
| 89 | System IRQ 5, INT# A
|
|---|
| 90 |
|
|---|
| 91 | Bus 0 (PCI), Device Number 2, Device Function 5
|
|---|
| 92 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 93 | Device 5513h SiS5513 EIDE Controller (A,B step)
|
|---|
| 94 | Command 0007h (I/O Access, Memory Access, BusMaster)
|
|---|
| 95 | Status 0000h
|
|---|
| 96 | Revision D0h, Header Type 80h, Bus Latency Timer 80h
|
|---|
| 97 | Self test 00h (Self test not supported)
|
|---|
| 98 | PCI Class Storage, type IDE (ATA)
|
|---|
| 99 | PCI EIDE Controller Features :
|
|---|
| 100 | BusMaster EIDE is supported
|
|---|
| 101 | Primary Channel is at I/O Port 01F0h and IRQ 14
|
|---|
| 102 | Secondary Channel is at I/O Port 0170h and IRQ 15
|
|---|
| 103 | Subsystem ID 55131039h SiS5513 EIDE Controller (A,B step) (Generic ID)
|
|---|
| 104 | Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 105 | Address 0 is not present or not configured!
|
|---|
| 106 | Address 1 is not present or not configured!
|
|---|
| 107 | Address 2 is not present or not configured!
|
|---|
| 108 | Address 3 is not present or not configured!
|
|---|
| 109 | Address 4 is an I/O Port : FF00h..FF07h
|
|---|
| 110 |
|
|---|
| 111 | Bus 0 (PCI), Device Number 2, Device Function 7
|
|---|
| 112 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 113 | Device 7012h SiS7012 Audio Codec
|
|---|
| 114 | Command 0105h (I/O Access, BusMaster, System Errors)
|
|---|
| 115 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
|
|---|
| 116 | Medium Timing)
|
|---|
| 117 | Revision A0h, Header Type 00h, Bus Latency Timer 40h
|
|---|
| 118 | Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
|
|---|
| 119 | Self test 00h (Self test not supported)
|
|---|
| 120 | PCI Class Multimedia, type Audio
|
|---|
| 121 | Subsystem ID 030013F6h C-Media AC'97 Audio Device
|
|---|
| 122 | Subsystem Vendor 13F6h C-Media Electronics Inc
|
|---|
| 123 | Address 0 is an I/O Port : DC00h..DCFFh
|
|---|
| 124 | Address 1 is an I/O Port : D800h..D83Fh
|
|---|
| 125 | System IRQ 10, INT# C
|
|---|
| 126 | New Capabilities List Present:
|
|---|
| 127 | Power Management Capability, Version 1.1
|
|---|
| 128 | Does not support low power State D1 or D2
|
|---|
| 129 | Supports PME# signalling from mode(s) D3hot, D3cold
|
|---|
| 130 | PME# signalling is currently disabled
|
|---|
| 131 | 3.3v AUX Current required : 55 mA
|
|---|
| 132 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 133 |
|
|---|
| 134 | Bus 0 (PCI), Device Number 3, Device Function 0
|
|---|
| 135 | Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 136 | Device 0900h SiS900 10/100 Ethernet Adapter
|
|---|
| 137 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
|
|---|
| 138 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
|
|---|
| 139 | Medium Timing)
|
|---|
| 140 | Revision 90h, Header Type 00h, Bus Latency Timer 40h
|
|---|
| 141 | Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
|
|---|
| 142 | Self test 00h (Self test not supported)
|
|---|
| 143 | PCI Class Network, type Ethernet
|
|---|
| 144 | Subsystem ID 09001039h SiS900 10/100 Ethernet Adapter (Generic ID)
|
|---|
| 145 | Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
|
|---|
| 146 | Address 0 is an I/O Port : D400h..D4FFh
|
|---|
| 147 | Address 1 is a Memory Address (0-4GiB) : CFFDD000h..CFFDDFFFh
|
|---|
| 148 | System IRQ 10, INT# A
|
|---|
| 149 | Expansion ROM of 128 KiB decoded by this card, currently disabled
|
|---|
| 150 | New Capabilities List Present:
|
|---|
| 151 | Power Management Capability, Version 1.1
|
|---|
| 152 | Supports low power State D1
|
|---|
| 153 | Supports low power State D2
|
|---|
| 154 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
|
|---|
| 155 | PME# signalling is currently enabled
|
|---|
| 156 | 3.3v AUX Current required : 0 mA (Self powered)
|
|---|
| 157 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 158 |
|
|---|
| 159 | Bus 0 (PCI), Device Number 19, Device Function 0
|
|---|
| 160 | Vendor 1106h VIA Technologies Inc
|
|---|
| 161 | Device 3038h VT6202 USB Controller
|
|---|
| 162 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
|
|---|
| 163 | Status 0210h (Has Capabilities List, Medium Timing)
|
|---|
| 164 | Revision 50h, Header Type 80h, Bus Latency Timer 40h
|
|---|
| 165 | Self test 00h (Self test not supported)
|
|---|
| 166 | Cache line size 32 Bytes (8 DWords)
|
|---|
| 167 | PCI Class Serial, type USB (UHCI)
|
|---|
| 168 | Subsystem ID 12340925h VIA USB Controller
|
|---|
| 169 | Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
|
|---|
| 170 | Address 0 is not present or not configured!
|
|---|
| 171 | Address 1 is not present or not configured!
|
|---|
| 172 | Address 2 is not present or not configured!
|
|---|
| 173 | Address 3 is not present or not configured!
|
|---|
| 174 | Address 4 is an I/O Port : CC00h..CC13h
|
|---|
| 175 | System IRQ 11, INT# A
|
|---|
| 176 | New Capabilities List Present:
|
|---|
| 177 | Power Management Capability, Version 1.1
|
|---|
| 178 | Does not support low power State D1 or D2
|
|---|
| 179 | Supports PME# signalling from mode(s) D0, D3hot, D3cold
|
|---|
| 180 | PME# signalling is currently disabled
|
|---|
| 181 | 3.3v AUX Current required : 375 mA
|
|---|
| 182 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 183 |
|
|---|
| 184 | Bus 0 (PCI), Device Number 19, Device Function 1
|
|---|
| 185 | Vendor 1106h VIA Technologies Inc
|
|---|
| 186 | Device 3038h VT6202 USB Controller
|
|---|
| 187 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
|
|---|
| 188 | Status 0210h (Has Capabilities List, Medium Timing)
|
|---|
| 189 | Revision 50h, Header Type 80h, Bus Latency Timer 40h
|
|---|
| 190 | Self test 00h (Self test not supported)
|
|---|
| 191 | Cache line size 32 Bytes (8 DWords)
|
|---|
| 192 | PCI Class Serial, type USB (UHCI)
|
|---|
| 193 | Subsystem ID 12340925h VIA USB Controller
|
|---|
| 194 | Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
|
|---|
| 195 | Address 0 is not present or not configured!
|
|---|
| 196 | Address 1 is not present or not configured!
|
|---|
| 197 | Address 2 is not present or not configured!
|
|---|
| 198 | Address 3 is not present or not configured!
|
|---|
| 199 | Address 4 is an I/O Port : D000h..D013h
|
|---|
| 200 | System IRQ 11, INT# B
|
|---|
| 201 | New Capabilities List Present:
|
|---|
| 202 | Power Management Capability, Version 1.1
|
|---|
| 203 | Does not support low power State D1 or D2
|
|---|
| 204 | Supports PME# signalling from mode(s) D0, D3hot, D3cold
|
|---|
| 205 | PME# signalling is currently disabled
|
|---|
| 206 | 3.3v AUX Current required : 375 mA
|
|---|
| 207 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 208 |
|
|---|
| 209 | Bus 0 (PCI), Device Number 19, Device Function 2
|
|---|
| 210 | Vendor 1106h VIA Technologies Inc
|
|---|
| 211 | Device 3104h VT6202 USB 2.0 Enhanced Host Controller
|
|---|
| 212 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
|
|---|
| 213 | Status 0210h (Has Capabilities List, Medium Timing)
|
|---|
| 214 | Revision 51h, Header Type 80h, Bus Latency Timer 40h
|
|---|
| 215 | Self test 00h (Self test not supported)
|
|---|
| 216 | Cache line size 32 Bytes (8 DWords)
|
|---|
| 217 | PCI Class Serial, type USB 2.0 (EHCI)
|
|---|
| 218 | Subsystem ID 12340925h VT6202 USB 2.0 Enhanced Host Controller
|
|---|
| 219 | Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
|
|---|
| 220 | Address 0 is a Memory Address (0-4GiB) : CFFFDF00h..CFFFDFFFh
|
|---|
| 221 | System IRQ 10, INT# C
|
|---|
| 222 | New Capabilities List Present:
|
|---|
| 223 | Power Management Capability, Version 1.1
|
|---|
| 224 | Does not support low power State D1 or D2
|
|---|
| 225 | Supports PME# signalling from mode(s) D0, D3hot, D3cold
|
|---|
| 226 | PME# signalling is currently disabled
|
|---|
| 227 | 3.3v AUX Current required : 375 mA
|
|---|
| 228 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 229 |
|
|---|
| 230 | Bus 1 (AGP), Device Number 0, Device Function 0
|
|---|
| 231 | Vendor 10DEh Nvidia Corp
|
|---|
| 232 | Device 0201h GeForce3 Ti 200 [NV20.1]
|
|---|
| 233 | Command 0007h (I/O Access, Memory Access, BusMaster)
|
|---|
| 234 | Status 02B0h (Has Capabilities List, Supports 66MHz,
|
|---|
| 235 | Supports Back-To-Back Trans., Medium Timing)
|
|---|
| 236 | Revision A3h, Header Type 00h, Bus Latency Timer 40h
|
|---|
| 237 | Minimum Bus Grant 05h, Maximum Bus Latency 01h
|
|---|
| 238 | Self test 00h (Self test not supported)
|
|---|
| 239 | PCI Class Display, type VGA
|
|---|
| 240 | Subsystem ID 00301545h Unknown
|
|---|
| 241 | Subsystem Vendor 1545h Visiontek
|
|---|
| 242 | Address 0 is a Memory Address (0-4GiB) : CE000000h..CEFFFFFFh
|
|---|
| 243 | Address 1 is a Memory Address (0-4GiB, Prefetchable) : C8000000h..CBFFFFFFh
|
|---|
| 244 | Address 2 is a Memory Address (0-4GiB, Prefetchable) : CDC80000h..CDCFFFFFh
|
|---|
| 245 | System IRQ 11, INT# A
|
|---|
| 246 | Expansion ROM of 64 KiB decoded by this card, currently disabled
|
|---|
| 247 | New Capabilities List Present:
|
|---|
| 248 | Power Management Capability, Version 1.1
|
|---|
| 249 | Does not support low power State D1 or D2
|
|---|
| 250 | Does not support PME# signalling
|
|---|
| 251 | Current Power State : D0 (Device operational, no power saving)
|
|---|
| 252 | AGP Capability, Version 2.0 (AGP 4x and below support)
|
|---|
| 253 | AGP Speed(s) Supported : 1x 2x 4x
|
|---|
| 254 | FW Transfers Supported : No
|
|---|
| 255 | >4GiB Address Space Supported : No
|
|---|
| 256 | Sideband Addressing Supported : No
|
|---|
| 257 | Maximum Command Queue Length : 32 bytes
|
|---|
| 258 | AGP Speed Selected : 4x
|
|---|
| 259 | FW Transfers Enabled : No
|
|---|
| 260 | >4GiB Address Space Enabled : No
|
|---|
| 261 | AGP Enabled : Yes
|
|---|
| 262 | Sideband Addressing Enabled : No
|
|---|
| 263 | Current Command Queue Length : 1 byte
|
|---|
| 264 |
|
|---|
| 265 | ROM PCI IRQ routing table Tests....
|
|---|
| 266 | ROM IRQ routing table found at F000h:78C0h
|
|---|
| 267 | Table Version 1.0 - OK
|
|---|
| 268 | Table size 176 bytes - OK
|
|---|
| 269 | Table Checksum DCh - OK
|
|---|
| 270 | PCI Interrupt Router: SiS PCI to ISA Bridge (LPC Bridge)
|
|---|
| 271 | IRQ's dedicated to PCI : None
|
|---|
| 272 | The ROM PCI IRQ routing table appears to be OK.
|
|---|
| 273 |
|
|---|
| 274 | IRQ Summary: IRQs 5,10,11,14,15 are used by PCI devices
|
|---|
| 275 | Shared IRQs: IRQ 10 is shared by 4 PCI Devices
|
|---|
| 276 | IRQ 11 is shared by 3 PCI Devices
|
|---|