1 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. |
---|
2 | Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)." |
---|
3 | |
---|
4 | PCI BIOS Version 2.10 found! |
---|
5 | Number of PCI Busses : 11 |
---|
6 | PCI Characteristics : Config Mechanism 1 |
---|
7 | |
---|
8 | Searching for PCI Devices using the OEMHLP$ driver |
---|
9 | |
---|
10 | Bus 0 (PCI Express), Device Number 0, Device Function 0 |
---|
11 | Vendor 8086h Intel Corporation |
---|
12 | Device 2770h 82945G Memory Controller Hub (MCH) |
---|
13 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
14 | Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
15 | Received Master Abort, Fast Timing) |
---|
16 | Revision 02h, Header Type 00h, Bus Latency Timer 00h |
---|
17 | Self test 00h (Self test not supported) |
---|
18 | PCI Class Bridge, type PCI to HOST |
---|
19 | Subsystem ID 02F61014h Unknown |
---|
20 | Subsystem Vendor 1014h IBM |
---|
21 | New Capabilities List Present: |
---|
22 | Vendor-Dependant Capability |
---|
23 | |
---|
24 | Bus 0 (PCI Express), Device Number 2, Device Function 0 |
---|
25 | Vendor 8086h Intel Corporation |
---|
26 | Device 2772h 82945G Integrated Graphics Controller |
---|
27 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
28 | Status 0090h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
29 | Fast Timing) |
---|
30 | Revision 02h, Header Type 80h, Bus Latency Timer 00h |
---|
31 | Self test 00h (Self test not supported) |
---|
32 | PCI Class Display, type VGA |
---|
33 | Subsystem ID 02F61014h Unknown |
---|
34 | Subsystem Vendor 1014h IBM |
---|
35 | Address 0 is a Memory Address (0-4GiB) : D0400000h |
---|
36 | Address 1 is an I/O Port : 30C0h |
---|
37 | Address 2 is a Memory Address (0-4GiB, Prefetchable) : C0000000h |
---|
38 | Address 3 is a Memory Address (0-4GiB) : D0480000h |
---|
39 | System IRQ 5, INT# A |
---|
40 | New Capabilities List Present: |
---|
41 | Message Signalled Interrupt Capability |
---|
42 | MSI is disabled |
---|
43 | MSI function can generate 32-bit addresses |
---|
44 | Power Management Capability, Version 1.1 |
---|
45 | Does not support low power State D1 or D2 |
---|
46 | Does not support PME# signalling |
---|
47 | Current Power State : D0 (Device operational, no power saving) |
---|
48 | |
---|
49 | Bus 0 (PCI Express), Device Number 2, Device Function 1 |
---|
50 | Vendor 8086h Intel Corporation |
---|
51 | Device 2776h 82945G Integrated Graphics Controller |
---|
52 | Command 0000h (Bus Access Disabled!!) |
---|
53 | Status 0090h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
54 | Fast Timing) |
---|
55 | Revision 02h, Header Type 80h, Bus Latency Timer 00h |
---|
56 | Self test 00h (Self test not supported) |
---|
57 | PCI Class Display, type Other |
---|
58 | Subsystem ID 02F61014h Unknown |
---|
59 | Subsystem Vendor 1014h IBM |
---|
60 | New Capabilities List Present: |
---|
61 | Power Management Capability, Version 1.1 |
---|
62 | Does not support low power State D1 or D2 |
---|
63 | Does not support PME# signalling |
---|
64 | Current Power State : D0 (Device operational, no power saving) |
---|
65 | |
---|
66 | Bus 0 (PCI Express), Device Number 27, Device Function 0 |
---|
67 | Vendor 8086h Intel Corporation |
---|
68 | Device 27D8h 82801G (ICH7 Family) High Definition Audio |
---|
69 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
70 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
71 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
72 | Self test 00h (Self test not supported) |
---|
73 | Cache line size 32 Bytes (8 DWords) |
---|
74 | PCI Class Multimedia, type Unknown! |
---|
75 | Subsystem ID 02F61014h Unknown |
---|
76 | Subsystem Vendor 1014h IBM |
---|
77 | Address 0 is a Memory Address (64-bit) : D04C0000h..D04C3FFFh |
---|
78 | System IRQ 9, INT# A |
---|
79 | New Capabilities List Present: |
---|
80 | Power Management Capability, Version 1.1 |
---|
81 | Does not support low power State D1 or D2 |
---|
82 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
83 | PME# signalling is currently disabled |
---|
84 | 3.3v AUX Current required : 55 mA |
---|
85 | Current Power State : D0 (Device operational, no power saving) |
---|
86 | Message Signalled Interrupt Capability |
---|
87 | MSI is disabled |
---|
88 | MSI function can generate 64-bit addresses |
---|
89 | PCI Express Capability, Version 1 |
---|
90 | Device/Port Type : |
---|
91 | Root Complex Integrated Endpoint Device |
---|
92 | Unsupported Request Severity is Non-Fatal |
---|
93 | Device Status : |
---|
94 | AUX Power Detected |
---|
95 | Link Capabilities : |
---|
96 | Maximum Link speed : Unknown (00h)!! |
---|
97 | Maximum Link Width : xReserved |
---|
98 | Link Port Number : 0 |
---|
99 | Link Control : |
---|
100 | Asynchronous Clocking in Use |
---|
101 | Link Status : |
---|
102 | Current Link speed : Unknown (00)!! |
---|
103 | Current Link Width : x0 |
---|
104 | |
---|
105 | Bus 0 (PCI Express), Device Number 28, Device Function 0 |
---|
106 | Vendor 8086h Intel Corporation |
---|
107 | Device 27D0h 82801G (ICH7 Family) PCI Express Root Port |
---|
108 | Command 0000h (Bus Access Disabled!!) |
---|
109 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
110 | Revision 01h, Header Type 81h, Bus Latency Timer 00h |
---|
111 | Self test 00h (Self test not supported) |
---|
112 | Cache line size 32 Bytes (8 DWords) |
---|
113 | PCI Class Bridge, type PCI to PCI |
---|
114 | Subsystem ID 02F61014h Unknown |
---|
115 | Subsystem Vendor 1014h IBM |
---|
116 | System IRQ 10, INT# A |
---|
117 | PCI Bridge Information: |
---|
118 | Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2 |
---|
119 | Secondary Bus Command 0000h |
---|
120 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing) |
---|
121 | Secondary Bus Latency 00h |
---|
122 | Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh |
---|
123 | Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh |
---|
124 | New Capabilities List Present: |
---|
125 | PCI Express Capability, Version 1 |
---|
126 | Device/Port Type : |
---|
127 | Root port of PCI Express Root Complex |
---|
128 | Port Type : |
---|
129 | Port is an Expansion Slot |
---|
130 | Fatal Error Reporting Enabled |
---|
131 | Unsupported Request Severity is Non-Fatal |
---|
132 | Device Status : |
---|
133 | Correctable Error Detected |
---|
134 | AUX Power Detected |
---|
135 | Link Capabilities : |
---|
136 | Maximum Link speed : 2.5Gb/s |
---|
137 | Maximum Link Width : x1 |
---|
138 | Link Port Number : 1 |
---|
139 | Link Control : |
---|
140 | Common Clock Configuration In Use |
---|
141 | Link Status : |
---|
142 | Current Link speed : 2.5Gb/s |
---|
143 | Current Link Width : x1 |
---|
144 | Slot Capabilities : |
---|
145 | Hot Plug Surprise is Possible |
---|
146 | Hot Plug Capable |
---|
147 | Slot Power Limit Value : 2.000 Watts |
---|
148 | Physical slot Number 0 |
---|
149 | Message Signalled Interrupt Capability |
---|
150 | MSI is disabled |
---|
151 | MSI function can generate 32-bit addresses |
---|
152 | Subsystem ID & Subsystem Vendor ID Capability |
---|
153 | SSVID : 1014h |
---|
154 | SSID : 02F6h |
---|
155 | Power Management Capability, Version 1.1 |
---|
156 | Does not support low power State D1 or D2 |
---|
157 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
158 | PME# signalling is currently enabled |
---|
159 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
160 | Current Power State : D0 (Device operational, no power saving) |
---|
161 | |
---|
162 | Bus 0 (PCI Express), Device Number 28, Device Function 1 |
---|
163 | Vendor 8086h Intel Corporation |
---|
164 | Device 27D2h 82801G (ICH7 Family) PCI Express Root Port |
---|
165 | Command 0000h (Bus Access Disabled!!) |
---|
166 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
167 | Revision 01h, Header Type 81h, Bus Latency Timer 00h |
---|
168 | Self test 00h (Self test not supported) |
---|
169 | Cache line size 32 Bytes (8 DWords) |
---|
170 | PCI Class Bridge, type PCI to PCI |
---|
171 | Subsystem ID 02F61014h Unknown |
---|
172 | Subsystem Vendor 1014h IBM |
---|
173 | System IRQ 5, INT# B |
---|
174 | PCI Bridge Information: |
---|
175 | Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4 |
---|
176 | Secondary Bus Command 0000h |
---|
177 | Secondary Bus Status 2000h (Received Master Abort, Fast Timing) |
---|
178 | Secondary Bus Latency 00h |
---|
179 | Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh |
---|
180 | Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh |
---|
181 | New Capabilities List Present: |
---|
182 | PCI Express Capability, Version 1 |
---|
183 | Device/Port Type : |
---|
184 | Root port of PCI Express Root Complex |
---|
185 | Port Type : |
---|
186 | Port is an Expansion Slot |
---|
187 | Fatal Error Reporting Enabled |
---|
188 | Unsupported Request Severity is Non-Fatal |
---|
189 | Device Status : |
---|
190 | AUX Power Detected |
---|
191 | Link Capabilities : |
---|
192 | Maximum Link speed : 2.5Gb/s |
---|
193 | Maximum Link Width : x1 |
---|
194 | Link Port Number : 2 |
---|
195 | Link Control : |
---|
196 | Common Clock Configuration In Use |
---|
197 | Link Status : |
---|
198 | Current Link speed : 2.5Gb/s |
---|
199 | Current Link Width : x0 |
---|
200 | Slot Capabilities : |
---|
201 | Hot Plug Surprise is Possible |
---|
202 | Hot Plug Capable |
---|
203 | Slot Power Limit Value : 4.000 Watts |
---|
204 | Physical slot Number 0 |
---|
205 | Message Signalled Interrupt Capability |
---|
206 | MSI is disabled |
---|
207 | MSI function can generate 32-bit addresses |
---|
208 | Subsystem ID & Subsystem Vendor ID Capability |
---|
209 | SSVID : 1014h |
---|
210 | SSID : 02F6h |
---|
211 | Power Management Capability, Version 1.1 |
---|
212 | Does not support low power State D1 or D2 |
---|
213 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
214 | PME# signalling is currently enabled |
---|
215 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
216 | Current Power State : D0 (Device operational, no power saving) |
---|
217 | |
---|
218 | Bus 0 (PCI Express), Device Number 29, Device Function 0 |
---|
219 | Vendor 8086h Intel Corporation |
---|
220 | Device 27C8h 82801G (ICH7 Family) USB Universal Host Controller |
---|
221 | Command 0005h (I/O Access, BusMaster) |
---|
222 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
223 | Revision 01h, Header Type 80h, Bus Latency Timer 00h |
---|
224 | Self test 00h (Self test not supported) |
---|
225 | PCI Class Serial, type USB (UHCI) |
---|
226 | Subsystem ID 02F61014h Unknown |
---|
227 | Subsystem Vendor 1014h IBM |
---|
228 | Address 0 is not present or not configured! |
---|
229 | Address 1 is not present or not configured! |
---|
230 | Address 2 is not present or not configured! |
---|
231 | Address 3 is not present or not configured! |
---|
232 | Address 4 is an I/O Port : 3000h..3013h |
---|
233 | System IRQ 11, INT# A |
---|
234 | |
---|
235 | Bus 0 (PCI Express), Device Number 29, Device Function 1 |
---|
236 | Vendor 8086h Intel Corporation |
---|
237 | Device 27C9h 82801G (ICH7 Family) USB Universal Host Controller |
---|
238 | Command 0005h (I/O Access, BusMaster) |
---|
239 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
240 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
241 | Self test 00h (Self test not supported) |
---|
242 | PCI Class Serial, type USB (UHCI) |
---|
243 | Subsystem ID 02F61014h Unknown |
---|
244 | Subsystem Vendor 1014h IBM |
---|
245 | Address 0 is not present or not configured! |
---|
246 | Address 1 is not present or not configured! |
---|
247 | Address 2 is not present or not configured! |
---|
248 | Address 3 is not present or not configured! |
---|
249 | Address 4 is an I/O Port : 3020h..3033h |
---|
250 | System IRQ 9, INT# B |
---|
251 | |
---|
252 | Bus 0 (PCI Express), Device Number 29, Device Function 2 |
---|
253 | Vendor 8086h Intel Corporation |
---|
254 | Device 27CAh 82801G (ICH7 Family) USB Universal Host Controller |
---|
255 | Command 0005h (I/O Access, BusMaster) |
---|
256 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
257 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
258 | Self test 00h (Self test not supported) |
---|
259 | PCI Class Serial, type USB (UHCI) |
---|
260 | Subsystem ID 02F61014h Unknown |
---|
261 | Subsystem Vendor 1014h IBM |
---|
262 | Address 0 is not present or not configured! |
---|
263 | Address 1 is not present or not configured! |
---|
264 | Address 2 is not present or not configured! |
---|
265 | Address 3 is not present or not configured! |
---|
266 | Address 4 is an I/O Port : 3040h..3053h |
---|
267 | System IRQ 11, INT# C |
---|
268 | |
---|
269 | Bus 0 (PCI Express), Device Number 29, Device Function 3 |
---|
270 | Vendor 8086h Intel Corporation |
---|
271 | Device 27CBh 82801G (ICH7 Family) USB Universal Host Controller |
---|
272 | Command 0005h (I/O Access, BusMaster) |
---|
273 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
274 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
275 | Self test 00h (Self test not supported) |
---|
276 | PCI Class Serial, type USB (UHCI) |
---|
277 | Subsystem ID 02F61014h Unknown |
---|
278 | Subsystem Vendor 1014h IBM |
---|
279 | Address 0 is not present or not configured! |
---|
280 | Address 1 is not present or not configured! |
---|
281 | Address 2 is not present or not configured! |
---|
282 | Address 3 is not present or not configured! |
---|
283 | Address 4 is an I/O Port : 3060h..3073h |
---|
284 | System IRQ 5, INT# D |
---|
285 | |
---|
286 | Bus 0 (PCI Express), Device Number 29, Device Function 7 |
---|
287 | Vendor 8086h Intel Corporation |
---|
288 | Device 27CCh 82801G (ICH7 Family) USB 2.0 Enhanced Host Controller |
---|
289 | Command 0106h (Memory Access, BusMaster, System Errors) |
---|
290 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
291 | Medium Timing) |
---|
292 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
293 | Self test 00h (Self test not supported) |
---|
294 | PCI Class Serial, type USB 2.0 (EHCI) |
---|
295 | Subsystem ID 02F61014h Unknown |
---|
296 | Subsystem Vendor 1014h IBM |
---|
297 | Address 0 is a Memory Address (0-4GiB) : D04C4000h..D04C4093h |
---|
298 | System IRQ 11, INT# A |
---|
299 | New Capabilities List Present: |
---|
300 | Power Management Capability, Version 1.1 |
---|
301 | Does not support low power State D1 or D2 |
---|
302 | Supports PME# signalling from mode(s) D0, D3hot, D3cold |
---|
303 | PME# signalling is currently disabled |
---|
304 | 3.3v AUX Current required : 375 mA |
---|
305 | Current Power State : D0 (Device operational, no power saving) |
---|
306 | USB 2.0 EHCI Debug Port Capability |
---|
307 | |
---|
308 | Bus 0 (PCI Express), Device Number 30, Device Function 0 |
---|
309 | Vendor 8086h Intel Corporation |
---|
310 | Device 244Eh 82801GB Hub Interface to PCI Bridge (ICH7 A1 step) |
---|
311 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
312 | Status 0010h (Has Capabilities List, Fast Timing) |
---|
313 | Revision E1h, Header Type 01h, Bus Latency Timer 00h |
---|
314 | Self test 00h (Self test not supported) |
---|
315 | PCI Class Bridge, type PCI to PCI (Subtractive Decode) |
---|
316 | Subsystem ID 02F61014h Unknown |
---|
317 | Subsystem Vendor 1014h IBM |
---|
318 | PCI Bridge Information: |
---|
319 | Primary Bus Number 0, Secondary Bus Number 10, Subordinate Bus number 10 |
---|
320 | Secondary Bus Command 0004h (ISA mapping) |
---|
321 | Secondary Bus Status 2280h (Supports Back-To-Back Trans., |
---|
322 | Received Master Abort, Medium Timing) |
---|
323 | Secondary Bus Latency 20h |
---|
324 | I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit) |
---|
325 | Memory Range Passed to Secondary Bus : D0000000h..D01FFFFFh |
---|
326 | Prefetchable Memory Range Passed to Secondary Bus : None |
---|
327 | New Capabilities List Present: |
---|
328 | Subsystem ID & Subsystem Vendor ID Capability |
---|
329 | SSVID : 1014h |
---|
330 | SSID : 02F6h |
---|
331 | |
---|
332 | Bus 0 (PCI Express), Device Number 31, Device Function 0 |
---|
333 | Vendor 8086h Intel Corporation |
---|
334 | Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Controller |
---|
335 | Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) |
---|
336 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
337 | Revision 01h, Header Type 80h, Bus Latency Timer 00h |
---|
338 | Self test 00h (Self test not supported) |
---|
339 | PCI Class Bridge, type PCI to ISA |
---|
340 | Subsystem ID 02F61014h Unknown |
---|
341 | Subsystem Vendor 1014h IBM |
---|
342 | New Capabilities List Present: |
---|
343 | Vendor-Dependant Capability |
---|
344 | |
---|
345 | Bus 0 (PCI Express), Device Number 31, Device Function 2 |
---|
346 | Vendor 8086h Intel Corporation |
---|
347 | Device 27C0h 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller |
---|
348 | Command 0005h (I/O Access, BusMaster) |
---|
349 | Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz, |
---|
350 | Supports Back-To-Back Trans., Medium Timing) |
---|
351 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
352 | Self test 00h (Self test not supported) |
---|
353 | PCI Class Storage, type IDE (ATA) |
---|
354 | PCI EIDE Controller Features : |
---|
355 | BusMaster EIDE is supported |
---|
356 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
357 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
358 | Subsystem ID 02F61014h Unknown |
---|
359 | Subsystem Vendor 1014h IBM |
---|
360 | Address 0 is an I/O Port : 0000h (unconfigured) |
---|
361 | Address 1 is an I/O Port : 0000h (unconfigured) |
---|
362 | Address 2 is an I/O Port : 0000h (unconfigured) |
---|
363 | Address 3 is an I/O Port : 0000h (unconfigured) |
---|
364 | Address 4 is an I/O Port : 30B0h..30B7h |
---|
365 | System IRQ (disabled), INT# B |
---|
366 | New Capabilities List Present: |
---|
367 | Power Management Capability, Version 1.1 |
---|
368 | Does not support low power State D1 or D2 |
---|
369 | Supports PME# signalling from mode(s) D3hot |
---|
370 | PME# signalling is currently disabled |
---|
371 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
372 | Current Power State : D0 (Device operational, no power saving) |
---|
373 | |
---|
374 | Bus 0 (PCI Express), Device Number 31, Device Function 3 |
---|
375 | Vendor 8086h Intel Corporation |
---|
376 | Device 27DAh 82801G (ICH7 Family) SMBus Controller |
---|
377 | Command 0101h (I/O Access, System Errors) |
---|
378 | Status 0280h (Supports Back-To-Back Trans., Medium Timing) |
---|
379 | Revision 01h, Header Type 00h, Bus Latency Timer 00h |
---|
380 | Self test 00h (Self test not supported) |
---|
381 | PCI Class Serial, type SMBus Controller |
---|
382 | Subsystem ID 02F61014h Unknown |
---|
383 | Subsystem Vendor 1014h IBM |
---|
384 | Address 0 is not present or not configured! |
---|
385 | Address 1 is not present or not configured! |
---|
386 | Address 2 is not present or not configured! |
---|
387 | Address 3 is not present or not configured! |
---|
388 | Address 4 is an I/O Port : 3080h |
---|
389 | System IRQ 9, INT# B |
---|
390 | |
---|
391 | Bus 10 (PCI), Device Number 10, Device Function 0 |
---|
392 | Vendor 9004h Adaptec Inc |
---|
393 | Device 6178h AIC-7861 AHA-2940AU PCI SCSI Controller |
---|
394 | Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, |
---|
395 | System Errors) |
---|
396 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
397 | Medium Timing) |
---|
398 | Revision 03h, Header Type 00h, Bus Latency Timer 20h |
---|
399 | Minimum Bus Grant 04h, Maximum Bus Latency 04h |
---|
400 | Self test 00h (Self test not supported) |
---|
401 | Cache line size 32 Bytes (8 DWords) |
---|
402 | PCI Class Storage, type SCSI |
---|
403 | Subsystem ID 78619004h AHA-2940AU Single |
---|
404 | Subsystem Vendor 9004h Adaptec Inc |
---|
405 | Address 0 is an I/O Port : 4000h..400Fh |
---|
406 | Address 1 is a Memory Address (0-4GiB) : D0100000h |
---|
407 | System IRQ 9, INT# A |
---|
408 | Expansion ROM of 64 KiB decoded by this card, currently disabled |
---|
409 | New Capabilities List Present: |
---|
410 | Power Management Capability, Version 1.0 |
---|
411 | Does not support low power State D1 or D2 |
---|
412 | Does not support PME# signalling |
---|
413 | Current Power State : D0 (Device operational, no power saving) |
---|
414 | |
---|
415 | Bus 10 (PCI), Device Number 12, Device Function 0 |
---|
416 | Vendor 8086h Intel Corporation |
---|
417 | Device 1229h 82559 Fast Ethernet Multifunction PCI/CardBus Controller (C-step) |
---|
418 | Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, |
---|
419 | System Errors) |
---|
420 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
421 | Medium Timing) |
---|
422 | Revision 08h, Header Type 00h, Bus Latency Timer 42h |
---|
423 | Minimum Bus Grant 08h, Maximum Bus Latency 38h |
---|
424 | Self test 00h (Self test not supported) |
---|
425 | Cache line size 32 Bytes (8 DWords) |
---|
426 | PCI Class Network, type Ethernet |
---|
427 | Subsystem ID 105C1014h Netfinity 10/100 Ethernet Adapter |
---|
428 | Subsystem Vendor 1014h IBM |
---|
429 | Address 0 is a Memory Address (0-4GiB) : D0101000h |
---|
430 | Address 1 is an I/O Port : 4400h |
---|
431 | Address 2 is a Memory Address (0-4GiB) : D0000000h |
---|
432 | System IRQ 3, INT# A |
---|
433 | Expansion ROM of 1 MiB decoded by this card, currently disabled |
---|
434 | New Capabilities List Present: |
---|
435 | Power Management Capability, Version 1.1 |
---|
436 | Supports low power State D1 |
---|
437 | Supports low power State D2 |
---|
438 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
439 | PME# signalling is currently enabled |
---|
440 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
441 | Current Power State : D0 (Device operational, no power saving) |
---|
442 | 580 mW D0 power consume |
---|
443 | 580 mW D0 power dissipate |
---|
444 | 400 mW D1 power consume |
---|
445 | 400 mW D1 power dissipate |
---|
446 | 400 mW D2 power consume |
---|
447 | 400 mW D2 power dissipate |
---|
448 | 400 mW D3 power consume |
---|
449 | 400 mW D3 power dissipate |
---|
450 | 0 mW common logic power consume |
---|
451 | |
---|
452 | ROM PCI IRQ routing table Tests.... |
---|
453 | ROM IRQ routing table found at F000h:DED0h |
---|
454 | Table Version 1.0 - OK |
---|
455 | Table size 272 bytes - OK |
---|
456 | Table Checksum CDh - OK |
---|
457 | PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Controller |
---|
458 | IRQ's dedicated to PCI : None |
---|
459 | Error: table entries 5 and 7 refer to the same Bus=0/Device=28! |
---|
460 | The ROM PCI IRQ routing table appears to be faulty!! |
---|
461 | |
---|
462 | IRQ Summary: IRQs 3,5,9,10,11,14,15 are used by PCI devices |
---|
463 | Shared IRQs: IRQ 5 is shared by 3 PCI Devices |
---|
464 | IRQ 9 is shared by 4 PCI Devices |
---|
465 | IRQ 11 is shared by 3 PCI Devices |
---|