Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)." PCI BIOS Version 2.10 found! Number of PCI Busses : 11 PCI Characteristics : Config Mechanism 1 Searching for PCI Devices using the OEMHLP$ driver Bus 0 (PCI Express), Device Number 0, Device Function 0 Vendor 8086h Intel Corporation Device 2770h 82945G Memory Controller Hub (MCH) Command 0106h (Memory Access, BusMaster, System Errors) Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing) Revision 02h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to HOST Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM New Capabilities List Present: Vendor-Dependant Capability Bus 0 (PCI Express), Device Number 2, Device Function 0 Vendor 8086h Intel Corporation Device 2772h 82945G Integrated Graphics Controller Command 0007h (I/O Access, Memory Access, BusMaster) Status 0090h (Has Capabilities List, Supports Back-To-Back Trans., Fast Timing) Revision 02h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Display, type VGA Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is a Memory Address (0-4GiB) : D0400000h Address 1 is an I/O Port : 30C0h Address 2 is a Memory Address (0-4GiB, Prefetchable) : C0000000h Address 3 is a Memory Address (0-4GiB) : D0480000h System IRQ 5, INT# A New Capabilities List Present: Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 2, Device Function 1 Vendor 8086h Intel Corporation Device 2776h 82945G Integrated Graphics Controller Command 0000h (Bus Access Disabled!!) Status 0090h (Has Capabilities List, Supports Back-To-Back Trans., Fast Timing) Revision 02h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Display, type Other Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM New Capabilities List Present: Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 27, Device Function 0 Vendor 8086h Intel Corporation Device 27D8h 82801G (ICH7 Family) High Definition Audio Command 0106h (Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Multimedia, type Unknown! Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is a Memory Address (64-bit) : D04C0000h..D04C3FFFh System IRQ 9, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 55 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is disabled MSI function can generate 64-bit addresses PCI Express Capability, Version 1 Device/Port Type : Root Complex Integrated Endpoint Device Unsupported Request Severity is Non-Fatal Device Status : AUX Power Detected Link Capabilities : Maximum Link speed : Unknown (00h)!! Maximum Link Width : xReserved Link Port Number : 0 Link Control : Asynchronous Clocking in Use Link Status : Current Link speed : Unknown (00)!! Current Link Width : x0 Bus 0 (PCI Express), Device Number 28, Device Function 0 Vendor 8086h Intel Corporation Device 27D0h 82801G (ICH7 Family) PCI Express Root Port Command 0000h (Bus Access Disabled!!) Status 0010h (Has Capabilities List, Fast Timing) Revision 01h, Header Type 81h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Bridge, type PCI to PCI Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM System IRQ 10, INT# A PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2 Secondary Bus Command 0000h Secondary Bus Status 2000h (Received Master Abort, Fast Timing) Secondary Bus Latency 00h Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh New Capabilities List Present: PCI Express Capability, Version 1 Device/Port Type : Root port of PCI Express Root Complex Port Type : Port is an Expansion Slot Fatal Error Reporting Enabled Unsupported Request Severity is Non-Fatal Device Status : Correctable Error Detected AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 1 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 Slot Capabilities : Hot Plug Surprise is Possible Hot Plug Capable Slot Power Limit Value : 2.000 Watts Physical slot Number 0 Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Subsystem ID & Subsystem Vendor ID Capability SSVID : 1014h SSID : 02F6h Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently enabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 28, Device Function 1 Vendor 8086h Intel Corporation Device 27D2h 82801G (ICH7 Family) PCI Express Root Port Command 0000h (Bus Access Disabled!!) Status 0010h (Has Capabilities List, Fast Timing) Revision 01h, Header Type 81h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Bridge, type PCI to PCI Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM System IRQ 5, INT# B PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4 Secondary Bus Command 0000h Secondary Bus Status 2000h (Received Master Abort, Fast Timing) Secondary Bus Latency 00h Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh New Capabilities List Present: PCI Express Capability, Version 1 Device/Port Type : Root port of PCI Express Root Complex Port Type : Port is an Expansion Slot Fatal Error Reporting Enabled Unsupported Request Severity is Non-Fatal Device Status : AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 2 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x0 Slot Capabilities : Hot Plug Surprise is Possible Hot Plug Capable Slot Power Limit Value : 4.000 Watts Physical slot Number 0 Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Subsystem ID & Subsystem Vendor ID Capability SSVID : 1014h SSID : 02F6h Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently enabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 29, Device Function 0 Vendor 8086h Intel Corporation Device 27C8h 82801G (ICH7 Family) USB Universal Host Controller Command 0005h (I/O Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 3000h..3013h System IRQ 11, INT# A Bus 0 (PCI Express), Device Number 29, Device Function 1 Vendor 8086h Intel Corporation Device 27C9h 82801G (ICH7 Family) USB Universal Host Controller Command 0005h (I/O Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 3020h..3033h System IRQ 9, INT# B Bus 0 (PCI Express), Device Number 29, Device Function 2 Vendor 8086h Intel Corporation Device 27CAh 82801G (ICH7 Family) USB Universal Host Controller Command 0005h (I/O Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 3040h..3053h System IRQ 11, INT# C Bus 0 (PCI Express), Device Number 29, Device Function 3 Vendor 8086h Intel Corporation Device 27CBh 82801G (ICH7 Family) USB Universal Host Controller Command 0005h (I/O Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 3060h..3073h System IRQ 5, INT# D Bus 0 (PCI Express), Device Number 29, Device Function 7 Vendor 8086h Intel Corporation Device 27CCh 82801G (ICH7 Family) USB 2.0 Enhanced Host Controller Command 0106h (Memory Access, BusMaster, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB 2.0 (EHCI) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is a Memory Address (0-4GiB) : D04C4000h..D04C4093h System IRQ 11, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) USB 2.0 EHCI Debug Port Capability Bus 0 (PCI Express), Device Number 30, Device Function 0 Vendor 8086h Intel Corporation Device 244Eh 82801GB Hub Interface to PCI Bridge (ICH7 A1 step) Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision E1h, Header Type 01h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to PCI (Subtractive Decode) Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 10, Subordinate Bus number 10 Secondary Bus Command 0004h (ISA mapping) Secondary Bus Status 2280h (Supports Back-To-Back Trans., Received Master Abort, Medium Timing) Secondary Bus Latency 20h I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit) Memory Range Passed to Secondary Bus : D0000000h..D01FFFFFh Prefetchable Memory Range Passed to Secondary Bus : None New Capabilities List Present: Subsystem ID & Subsystem Vendor ID Capability SSVID : 1014h SSID : 02F6h Bus 0 (PCI Express), Device Number 31, Device Function 0 Vendor 8086h Intel Corporation Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Controller Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0210h (Has Capabilities List, Medium Timing) Revision 01h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to ISA Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM New Capabilities List Present: Vendor-Dependant Capability Bus 0 (PCI Express), Device Number 31, Device Function 2 Vendor 8086h Intel Corporation Device 27C0h 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller Command 0005h (I/O Access, BusMaster) Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Storage, type IDE (ATA) PCI EIDE Controller Features : BusMaster EIDE is supported Primary Channel is at I/O Port 01F0h and IRQ 14 Secondary Channel is at I/O Port 0170h and IRQ 15 Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is an I/O Port : 0000h (unconfigured) Address 1 is an I/O Port : 0000h (unconfigured) Address 2 is an I/O Port : 0000h (unconfigured) Address 3 is an I/O Port : 0000h (unconfigured) Address 4 is an I/O Port : 30B0h..30B7h System IRQ (disabled), INT# B New Capabilities List Present: Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 31, Device Function 3 Vendor 8086h Intel Corporation Device 27DAh 82801G (ICH7 Family) SMBus Controller Command 0101h (I/O Access, System Errors) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type SMBus Controller Subsystem ID 02F61014h Unknown Subsystem Vendor 1014h IBM Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 3080h System IRQ 9, INT# B Bus 10 (PCI), Device Number 10, Device Function 0 Vendor 9004h Adaptec Inc Device 6178h AIC-7861 AHA-2940AU PCI SCSI Controller Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 03h, Header Type 00h, Bus Latency Timer 20h Minimum Bus Grant 04h, Maximum Bus Latency 04h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Storage, type SCSI Subsystem ID 78619004h AHA-2940AU Single Subsystem Vendor 9004h Adaptec Inc Address 0 is an I/O Port : 4000h..400Fh Address 1 is a Memory Address (0-4GiB) : D0100000h System IRQ 9, INT# A Expansion ROM of 64 KiB decoded by this card, currently disabled New Capabilities List Present: Power Management Capability, Version 1.0 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 10 (PCI), Device Number 12, Device Function 0 Vendor 8086h Intel Corporation Device 1229h 82559 Fast Ethernet Multifunction PCI/CardBus Controller (C-step) Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, System Errors) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 08h, Header Type 00h, Bus Latency Timer 42h Minimum Bus Grant 08h, Maximum Bus Latency 38h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Network, type Ethernet Subsystem ID 105C1014h Netfinity 10/100 Ethernet Adapter Subsystem Vendor 1014h IBM Address 0 is a Memory Address (0-4GiB) : D0101000h Address 1 is an I/O Port : 4400h Address 2 is a Memory Address (0-4GiB) : D0000000h System IRQ 3, INT# A Expansion ROM of 1 MiB decoded by this card, currently disabled New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently enabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) 580 mW D0 power consume 580 mW D0 power dissipate 400 mW D1 power consume 400 mW D1 power dissipate 400 mW D2 power consume 400 mW D2 power dissipate 400 mW D3 power consume 400 mW D3 power dissipate 0 mW common logic power consume ROM PCI IRQ routing table Tests.... ROM IRQ routing table found at F000h:DED0h Table Version 1.0 - OK Table size 272 bytes - OK Table Checksum CDh - OK PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Controller IRQ's dedicated to PCI : None Error: table entries 5 and 7 refer to the same Bus=0/Device=28! The ROM PCI IRQ routing table appears to be faulty!! IRQ Summary: IRQs 3,5,9,10,11,14,15 are used by PCI devices Shared IRQs: IRQ 5 is shared by 3 PCI Devices IRQ 9 is shared by 4 PCI Devices IRQ 11 is shared by 3 PCI Devices