Opened 12 years ago
Closed 12 years ago
#23 closed defect (worksforme)
Realtek driver troubles
| Reported by: | eco | Owned by: | David Azarewicz |
|---|---|---|---|
| Priority: | Feedback Pending | Component: | r8169 |
| Version: | 0.0.2 | Keywords: | |
| Cc: |
Description
Eugene Gorbunoff
r8169-0.0.2.zip
1) traps occur sometimes:
I made a phiti
2) slow Netbios over tcp/ip:
IBM Peers,
- copying a huge file -- speed: 32000 bytes per second
(from network to network)
- copying from Network drive to local disk =
good speed, 18,000K bytes
- copying from local disk to Network drive = 30000 bytes per second
Change History (8)
comment:1 Changed 12 years ago by
| Owner: | set to David Azarewicz |
|---|---|
| Priority: | major → Feedback Pending |
| Status: | new → accepted |
| Version: | → 0.0.2 |
comment:4 Changed 12 years ago by
This driver is now at the 0.0.4 revision level. Apparently you are not using the current software. Please try the current version.
comment:6 Changed 12 years ago by
e-co:
1) yee, 0.0.4 boots very good. No hangs, system is alive. No need to reboot the system 5 times (as old japanese driver)
2) TCP/IP works good.
3) Netbios over TCP/IP - very slow,
COPY FILES: FileCommander?, 20 000 BPS (?) If I make more network activity (from several applications) then the speed of Netbios over TCP/IP goes up.
BROWSE REMOTE VOLUME: If I enter a remote directory (with 10 sub-dirs), it requires 30 seconds .. 1 minute to complete the operation.
comment:8 Changed 12 years ago by
| Resolution: | → worksforme |
|---|---|
| Status: | accepted → closed |
No response from reporter. Cannot reproduce the problem in the current version.
The 0.0.2 version has a known memory corruption defect. Try the 0.0.3 version.