| Version 1 (modified by , 14 years ago) ( diff ) |
|---|
Trac Ticket Queries
Table of Contents
In addition to reports, Trac provides support for custom ticket queries, used to display lists of tickets meeting a specified set of criteria.
To configure and execute a custom query, switch to the View Tickets module from the navigation bar, and select the Custom Query link.
Filters
When you first go to the query page the default filter will display tickets relevant to you:
- If logged in then all open tickets it will display open tickets assigned to you.
- If not logged in but you have specified a name or email address in the preferences then it will display all open tickets where your email (or name if email not defined) is in the CC list.
- If not logged and no name/email defined in the preferences then all open issues are displayed.
Current filters can be removed by clicking the button to the left with the minus sign on the label. New filters are added from the pulldown lists at the bottom corners of the filters box ('And' conditions on the left, 'Or' conditions on the right). Filters with either a text box or a pulldown menu of options can be added multiple times to perform an or of the criteria.
You can use the fields just below the filters box to group the results based on a field, or display the full description for each ticket.
Once you've edited your filters click the Update button to refresh your results.
Navigating Tickets
Clicking on one of the query results will take you to that ticket. You can navigate through the results by clicking the Next Ticket or Previous Ticket links just below the main menu bar, or click the Back to Query link to return to the query page.
You can safely edit any of the tickets and continue to navigate through the results using the Next/Previous/Back to Query links after saving your results. When you return to the query any tickets which were edited will be displayed with italicized text. If one of the tickets was edited such that it no longer matches the query criteria the text will also be greyed. Lastly, if a new ticket matching the query criteria has been created, it will be shown in bold.
The query results can be refreshed and cleared of these status indicators by clicking the Update button again.
Saving Queries
Trac allows you to save the query as a named query accessible from the reports module. To save a query ensure that you have Updated the view and then click the Save query button displayed beneath the results. You can also save references to queries in Wiki content, as described below.
Note: one way to easily build queries like the ones below, you can build and test the queries in the Custom report module and when ready - click Save query. This will build the query string for you. All you need to do is remove the extra line breaks.
Using TracLinks
You may want to save some queries so that you can come back to them later. You can do this by making a link to the query from any Wiki page.
[query:status=new|assigned|reopened&version=1.0 Active tickets against 1.0]
Which is displayed as:
This uses a very simple query language to specify the criteria (see Query Language).
Alternatively, you can copy the query string of a query and paste that into the Wiki link, including the leading ? character:
[query:?status=new&status=assigned&status=reopened&group=owner Assigned tickets by owner]
Which is displayed as:
Using the [[TicketQuery]] Macro
The TicketQuery macro lets you display lists of tickets matching certain criteria anywhere you can use WikiFormatting.
Example:
[[TicketQuery(version=0.6|0.7&resolution=duplicate)]]
This is displayed as:
No results
Just like the query: wiki links, the parameter of this macro expects a query string formatted according to the rules of the simple ticket query language.
A more compact representation without the ticket summaries is also available:
[[TicketQuery(version=0.6|0.7&resolution=duplicate, compact)]]
This is displayed as:
No results
Finally, if you wish to receive only the number of defects that match the query, use the count parameter.
[[TicketQuery(version=0.6|0.7&resolution=duplicate, count)]]
This is displayed as:
Customizing the table format
You can also customize the columns displayed in the table format (format=table) by using col=<field> - you can specify multiple fields and what order they are displayed by placing pipes (|) between the columns like below:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter)]]
This is displayed as:
Results (1 - 3 of 34)
Full rows
In table format you can also have full rows by using rows=<field> like below:
[[TicketQuery(max=3,status=closed,order=id,desc=1,format=table,col=resolution|summary|owner|reporter,rows=description)]]
This is displayed as:
Results (1 - 3 of 34)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #41 | NoChangeNeeded | System hangs during boot with add-in PCIe SATA card | ||
| Description |
I'm out of SATA ports on my mobo (Tyan S2895 K8WE) so I bought a PCIe 4-port SATA card with a Marvell chipset. PCI shows: Bus 129 (PCI Express), Device Number 0, Device Function 0
System boots OK with no drives connected. Adding a drive causes a hang during boot. I have recorded the debug log on another machine per the troubleshooting doc. [d:\]bldlevel os2krnl Build Level Display Facility Version 6.12.675 Sep 25 2001 (C) Copyright IBM Corporation 1993-2001 Signature: @#IBM:14.106#@_SMP IBM OS/2 Kernel Vendor: IBM Revision: 14.106 File Version: 14.106 Description: _SMP IBM OS/2 Kernel [d:\]bldlevel \os2\boot\OS2AHCI.ADD Build Level Display Facility Version 6.12.675 Sep 25 2001 (C) Copyright IBM Corporation 1993-2001 Signature: @#D Azarewicz:1.32#@##1## 10 Nov 2013 07:58:57 DAZAR1 ::::::@@AHCI
Vendor: D Azarewicz Revision: 1.32 Date/Time: 10 Nov 2013 07:58:57 Build Machine: DAZAR1 File Version: 1.32 Description: AHCI Driver (c) 2013 D Azarewicz [d:\]bldlevel \os2\boot\acpi.psd Build Level Display Facility Version 6.12.675 Sep 25 2001 (C) Copyright IBM Corporation 1993-2001 Signature: @#D Azarewicz:3.22.03#@##1## 28 Nov 2013 11:00:28 DAZAR1 ::::03::@ @ACPI based PSD for eCS (c) 2013 D Azarewicz Vendor: D Azarewicz Revision: 3.22.03 Date/Time: 28 Nov 2013 11:00:28 Build Machine: DAZAR1 File Version: 3.22.3 Description: ACPI based PSD for eCS (c) 2013 D Azarewicz I have attached the log from the other machine. Is there anything else you need? Thanks! |
|||
| #37 | worksforme | System hangs after installing AHCI 1.32 and PCIe SATA card | ||
| Description |
Tyan S2895 Thunder K8WE mainboard with 4 x nVidia SATA ports working. Installed a new PCIe 4-port SATA controller for a 2 TiB Seagate drive. System hung during boot at the time it would be doing the chkdsk on the new drive. OS2AHCI.ADD added to config.sys in front of DANIS506.ADD. Long story short, I swapped the new HD to a mainboard SATA port with a Plextor DVDRW on the new controller. Still hung, this time on OS2CDROM.DMD. I remmed that out, and it booted OK. TESTLOG was run, hopefully with some good info. |
|||
| #36 | worksforme | Unable to play or burn audio tracks on SATA drive using AHCI 1.31 | ||
| Description |
No audio cd will play using any player. Neither cdrecord nor RSJ Copy Wizard is able to burn audio tracks. iso images of Video DVDs and data CDs and DVDs burn ok. Video DVDs play ok and data CDs and DVDs can be read. In all of these cases that work it takes an inordinate amount of time for the drive to become ready as reported in ticket #35. I include a startup log as well as logs of attempts to play an audio track using both CDPM and RSJ CdView and an attempt to burn an audio CD using cdrecord. |
|||
Query Language
query: TracLinks and the [[TicketQuery]] macro both use a mini “query language” for specifying query filters. Basically, the filters are separated by ampersands (&). Each filter then consists of the ticket field name, an operator, and one or more values. More than one value are separated by a pipe (|), meaning that the filter matches any of the values. To include a literal & or | in a value, escape the character with a backslash (\).
The available operators are:
= | the field content exactly matches one of the values |
~= | the field content contains one or more of the values |
^= | the field content starts with one of the values |
$= | the field content ends with one of the values |
All of these operators can also be negated:
!= | the field content matches none of the values |
!~= | the field content does not contain any of the values |
!^= | the field content does not start with any of the values |
!$= | the field content does not end with any of the values |
The date fields created and modified can be constrained by using the = operator and specifying a value containing two dates separated by two dots (..). Either end of the date range can be left empty, meaning that the corresponding end of the range is open. The date parser understands a few natural date specifications like "3 weeks ago", "last month" and "now", as well as Bugzilla-style date specifications like "1d", "2w", "3m" or "4y" for 1 day, 2 weeks, 3 months and 4 years, respectively. Spaces in date specifications can be left out to avoid having to quote the query string.
created=2007-01-01..2008-01-01 | query tickets created in 2007 |
created=lastmonth..thismonth | query tickets created during the previous month |
modified=1weekago.. | query tickets that have been modified in the last week |
modified=..30daysago | query tickets that have been inactive for the last 30 days |
See also: TracTickets, TracReports, TracGuide
