Custom Query (34 matches)

Can you add this feature to AHCI driver?

Danis506 supports this feature:

copy ibms506$ myhdd.txt

{{ R1.8.9.9 /!BIOS

Daniela's Bus Master IDE Driver for OS/2 Version 1.8.9.9

Controller:0 Port:01F0 IRQ:0E Status:OK BusMaster? Scatter/Gather?

Intel ICH7 SATA host (8086:27C0 rev:01) on PCI 0:31.2#0

Unit:0 Status:OK SMS:16 LBA NL:126 BusMaster? UltraDMA6/PIO4 BPB

Model:WDC WD5000AAKX-001CA0 15.01H15

OS2:log phys BPB/BIOS IDE:log phys Total Sectors

C 60801 65535 65535 16383 Avail 976773168 H 255 16 255 16 16 OS2 976768065 S 63 63 63 63 63 % Used 99.99

Controller:1 Port:0170 IRQ:0F Status:OK BusMaster? Scatter/Gather?

Intel ICH7 SATA host (8086:27C0 rev:01) on PCI 0:31.2#1

Unit:0 Status:OK SMS:16 LBA NL:126 BusMaster? UltraDMA6/PIO4 BPB

Model:WDC WD5000AARS-003BB1 80.00A80

OS2:log phys BPB/BIOS IDE:log phys Total Sectors

C 60801 65535 65535 16383 Avail 976773168 H 255 16 255 16 16 OS2 976768065 S 63 63 63 63 63 % Used 99.99

}}

When running a WD10EADS on OS2AHCI, disk geometry is not reported properly (see also ticket #29). LVM says:"DISK 1 reports a corrupt partition table". When running the HD via DANIS506 everything works fine. The problem also exists in version 1.29 (different to ticket #30).

When booting with Danis and in Bios compatibility mode it works.

When i switch to AHCI in Bios AHCI gives me: Found AHCI device Intel PCH AHCI (0:31:2 8086:3b2f) class:0x010601

And after that i get a: OS/2 is unable to operate your hard disk or diskette drive. The System is stopped

The OS2AHCI.ADD is version 1.31 from 8th August 2013