1 | BldLevel: @#D Azarewicz:1.31#@##1## 5 Sep 2013 08:31:44 DAZAR1 ::::::Test Build@@AHCI Driver (c) 2013 D Azarewicz |
---|
2 | CmdLine: OS2AHCI.ADD /d:2 |
---|
3 | [2031] WARNING: This test version of OS2AHCI will stop working in 29 days |
---|
4 | [2031] scanning PCI bus... |
---|
5 | [2953] Adapter 0 PCI=0:31:2 ID=8086:3b2f |
---|
6 | [2953] BAR #0: type = I/O, addr = 0x00001818, size = 8 |
---|
7 | [2953] BAR #1: type = I/O, addr = 0x0000180c, size = 4 |
---|
8 | [2953] BAR #2: type = I/O, addr = 0x00001810, size = 8 |
---|
9 | [2953] BAR #3: type = I/O, addr = 0x00001808, size = 4 |
---|
10 | [2953] BAR #4: type = I/O, addr = 0x00001840, size = 32 |
---|
11 | [2955] BAR #5: type = MEM, addr = 0xf2427000, size = 2048 |
---|
12 | [5054] Registered kernel exit routine for INT13 mode |
---|
13 | [5076] IORB 0668:8f42 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0) |
---|
14 | [5076] ahci_save_bios_config: BIOS AHCI mode is 0 |
---|
15 | [5076] AHCI global registers for adapter 0 0:31:2 irq=16 addr=0xf2427000 |
---|
16 | 00: ff20ff65 - 64bit ncq sntf mps sss alpm led clo pio_multi ssc part ems sxs cmd_slots:32 ports:6 |
---|
17 | 04: 80000000 - ahci_enabled |
---|
18 | 08: 00000000 |
---|
19 | 0c: 00000033 |
---|
20 | 10: 00010300 |
---|
21 | 14: 00000000 |
---|
22 | 18: 00000000 |
---|
23 | 1c: 01600002 |
---|
24 | 20: 07010000 |
---|
25 | 24: 00000004 - apst |
---|
26 | [5076] ahci_scan_ports: scanning ports on adapter 0 |
---|
27 | [5076] ahci_scan_ports: Wait till not busy on port 0 |
---|
28 | [5076] ahci_reset_port: resetting port 0.0 |
---|
29 | [5076] AHCI port 0 registers: |
---|
30 | PORT_CMD = 0x4002006 |
---|
31 | command engine status: |
---|
32 | PORT_SCR_ACT = 0x0 |
---|
33 | PORT_CMD_ISSUE = 0x0 |
---|
34 | link/device status: |
---|
35 | PORT_SCR_STAT = 0x621 |
---|
36 | PORT_SCR_CTL = 0x0 |
---|
37 | PORT_SCR_ERR = 0x50000 |
---|
38 | PORT_TFDATA = 0x50 |
---|
39 | interrupt status: |
---|
40 | PORT_IRQ_STAT = 0x400000 |
---|
41 | PORT_IRQ_MASK = 0x0 |
---|
42 | HOST_IRQ_STAT = 0x0 |
---|
43 | [5076] ahci_stop_port 0.0 |
---|
44 | [5076] ahci_reset_port: setting link speed and power management options |
---|
45 | [5076] ahci_reset_port: issuing COMRESET on port 0 |
---|
46 | [5078] Wait for communication... |
---|
47 | [5093] ahci_reset_port: starting port 0 again |
---|
48 | [5093] ahci_start_port 0.0 |
---|
49 | [5093] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
50 | [5093] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
51 | [5125] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
52 | [5125] ahci_scan_ports: port 0 seems to be attached to a device; probing... |
---|
53 | [5125] ATA command for 0.0.0, slot 0: |
---|
54 | [5125] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ |
---|
55 | [5125] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
56 | [5125] sg_list: 0628:0580 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... |
---|
57 | [5125] executing polled cmd...[5156] success |
---|
58 | [5156] ATA_IDENTIFY results: |
---|
59 | 0610:2f2a 5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 Z..?7.......?... |
---|
60 | 0610:2f3a 00 00 00 00 30 31 38 30-35 31 43 50 43 4b 34 30 ....018051CPCK40 |
---|
61 | 0610:2f4a 50 42 32 47 57 48 4a 33-03 00 5f 76 04 00 43 50 PB2GWHJ3.._v..CP |
---|
62 | 0610:2f5a 5a 33 37 43 46 30 49 48-41 54 48 43 20 49 54 48 Z37CF0IHATHC ITH |
---|
63 | 0610:2f6a 37 53 35 32 33 30 41 32-41 39 36 33 20 34 20 20 7S5230A2A963 4 |
---|
64 | 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 .. |
---|
65 | 0610:2f8a 00 40 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00 .@...@.......?.. |
---|
66 | 0610:2f9a 3f 00 10 fc fb 00 10 01-ff ff ff 0f 00 00 07 00 ?............... |
---|
67 | 0610:2faa 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
68 | 0610:2fba 00 00 00 00 00 00 1f 00-06 1f 04 00 4c 00 40 00 ............L.@. |
---|
69 | 0610:2fca fc 01 28 00 6b 34 09 7d-23 61 69 34 09 bc 23 61 ..(.k4.}#ai4..#a |
---|
70 | 0610:2fda 3f 20 2c 00 2c 00 80 40-fe ff 00 00 00 00 00 00 ? ,.,..@........ |
---|
71 | 0610:2fea 00 00 00 00 00 00 00 00-b0 ea 42 25 00 00 00 00 ..........B%.... |
---|
72 | 0610:2ffa 00 00 00 00 00 40 b8 7a-00 50 a6 cc c1 45 55 24 .....@.z.P...EU$ |
---|
73 | 0610:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 1c 40 ...............@ |
---|
74 | 0610:301a 1c 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .@.............. |
---|
75 | 0610:302a 29 00 0b 00 00 00 00 00-00 00 00 00 00 00 00 00 )............... |
---|
76 | 0610:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
77 | 0610:304a 00 00 00 00 00 00 00 00-05 40 00 40 00 80 00 00 .........@.@.... |
---|
78 | 0610:305a 5a 33 00 00 00 00 b1 b1-b1 47 00 00 00 00 00 00 Z3.......G...... |
---|
79 | 0610:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
80 | 0610:307a 03 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
81 | 0610:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
82 | 0610:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
83 | 0610:30aa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
84 | 0610:30ba 00 00 00 00 00 00 00 00-00 00 00 00 3d 00 00 00 ............=... |
---|
85 | 0610:30ca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
86 | 0610:30da 00 00 20 1c 00 00 00 00-00 00 00 00 1f 10 21 00 .. ...........!. |
---|
87 | 0610:30ea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
88 | 0610:30fa 00 00 00 00 01 00 c7 02-00 00 00 00 00 00 00 00 ................ |
---|
89 | 0610:310a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
90 | 0610:311a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 13 ................ |
---|
91 | [5156] found device 0.0.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
92 | [5156] ahci_stop_port 0.0 |
---|
93 | [5156] ahci_scan_ports: Wait till not busy on port 1 |
---|
94 | [5156] ahci_reset_port: resetting port 0.1 |
---|
95 | [5156] AHCI port 1 registers: |
---|
96 | PORT_CMD = 0xc0006 |
---|
97 | command engine status: |
---|
98 | PORT_SCR_ACT = 0x0 |
---|
99 | PORT_CMD_ISSUE = 0x0 |
---|
100 | link/device status: |
---|
101 | PORT_SCR_STAT = 0x113 |
---|
102 | PORT_SCR_CTL = 0x0 |
---|
103 | PORT_SCR_ERR = 0x0 |
---|
104 | PORT_TFDATA = 0x50 |
---|
105 | interrupt status: |
---|
106 | PORT_IRQ_STAT = 0x0 |
---|
107 | PORT_IRQ_MASK = 0x0 |
---|
108 | HOST_IRQ_STAT = 0x0 |
---|
109 | [5156] ahci_stop_port 0.1 |
---|
110 | [5156] ahci_reset_port: setting link speed and power management options |
---|
111 | [5156] ahci_reset_port: issuing COMRESET on port 1 |
---|
112 | [5158] Wait for communication... |
---|
113 | [5187] ahci_reset_port: starting port 1 again |
---|
114 | [5187] ahci_start_port 0.1 |
---|
115 | [5187] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
116 | [5187] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
117 | [5187] ahci_reset_port: PORT_TFDATA = 0x100 |
---|
118 | [5187] ahci_scan_ports: port 1 seems to be attached to a device; probing... |
---|
119 | [5187] ATA command for 0.1.0, slot 0: |
---|
120 | [5187] cmd_hdr: 0628:7800 05 00 01 00 00 00 00 00-00 3d ef 00 00 00 00 00 .........=...... |
---|
121 | [5187] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............ |
---|
122 | [5187] sg_list: 0628:7d80 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... |
---|
123 | [5187] executing polled cmd...[5218] success |
---|
124 | [5218] ATA_IDENTIFY_PACKET results: |
---|
125 | 0610:2f2a c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
126 | 0610:2f3a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
127 | 0610:2f4a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 2e 31 ...............1 |
---|
128 | 0610:2f5a 41 46 20 20 20 20 70 4f-69 74 72 61 20 63 56 44 AF pOitra cVD |
---|
129 | 0610:2f6a 20 44 57 52 41 20 2d 44-37 37 30 30 20 48 20 20 DWRA -D7700 H |
---|
130 | 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 .. |
---|
131 | 0610:2f8a 00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00 .....@.......... |
---|
132 | 0610:2f9a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00 ................ |
---|
133 | 0610:2faa 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
134 | 0610:2fba 00 00 00 00 00 00 00 00-02 06 00 00 68 00 40 00 ............h.@. |
---|
135 | 0610:2fca f8 01 00 00 18 42 00 40-00 40 18 42 00 00 00 40 .....B.@.@.B...@ |
---|
136 | 0610:2fda 3f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ? .............. |
---|
137 | 0610:2fea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
138 | 0610:2ffa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
139 | 0610:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
140 | 0610:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
141 | 0610:302a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
142 | 0610:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
143 | 0610:304a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
144 | 0610:305a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
145 | 0610:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
146 | 0610:307a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
147 | 0610:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
148 | 0610:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
149 | 0610:30aa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
150 | 0610:30ba 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
151 | 0610:30ca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
152 | 0610:30da 00 00 00 00 00 00 00 00-00 00 00 00 1f 10 00 00 ................ |
---|
153 | 0610:30ea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
154 | 0610:30fa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
155 | 0610:310a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
156 | 0610:311a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 21 ...............! |
---|
157 | [5218] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1 |
---|
158 | [5218] ahci_stop_port 0.1 |
---|
159 | [5218] ahci_scan_ports: Wait till not busy on port 4 |
---|
160 | [5218] ahci_reset_port: resetting port 0.4 |
---|
161 | [5218] AHCI port 4 registers: |
---|
162 | PORT_CMD = 0x242006 |
---|
163 | command engine status: |
---|
164 | PORT_SCR_ACT = 0x0 |
---|
165 | PORT_CMD_ISSUE = 0x0 |
---|
166 | link/device status: |
---|
167 | PORT_SCR_STAT = 0x0 |
---|
168 | PORT_SCR_CTL = 0x0 |
---|
169 | PORT_SCR_ERR = 0x0 |
---|
170 | PORT_TFDATA = 0x7f |
---|
171 | interrupt status: |
---|
172 | PORT_IRQ_STAT = 0x0 |
---|
173 | PORT_IRQ_MASK = 0x0 |
---|
174 | HOST_IRQ_STAT = 0x0 |
---|
175 | [5218] ahci_stop_port 0.4 |
---|
176 | [5218] ahci_reset_port: setting link speed and power management options |
---|
177 | [5218] ahci_reset_port: issuing COMRESET on port 4 |
---|
178 | [5220] Wait for communication... |
---|
179 | [5750] no device present after resetting port #4 (PORT_SCR_STAT = 0x0) |
---|
180 | [5750] ahci_stop_port 0.4 |
---|
181 | [5750] ahci_scan_ports: Wait till not busy on port 5 |
---|
182 | [5750] ahci_reset_port: resetting port 0.5 |
---|
183 | [5750] AHCI port 5 registers: |
---|
184 | PORT_CMD = 0x242006 |
---|
185 | command engine status: |
---|
186 | PORT_SCR_ACT = 0x0 |
---|
187 | PORT_CMD_ISSUE = 0x0 |
---|
188 | link/device status: |
---|
189 | PORT_SCR_STAT = 0x113 |
---|
190 | PORT_SCR_CTL = 0x0 |
---|
191 | PORT_SCR_ERR = 0x0 |
---|
192 | PORT_TFDATA = 0x150 |
---|
193 | interrupt status: |
---|
194 | PORT_IRQ_STAT = 0x0 |
---|
195 | PORT_IRQ_MASK = 0x0 |
---|
196 | HOST_IRQ_STAT = 0x0 |
---|
197 | [5750] ahci_stop_port 0.5 |
---|
198 | [5750] ahci_reset_port: setting link speed and power management options |
---|
199 | [5750] ahci_reset_port: issuing COMRESET on port 5 |
---|
200 | [5751] Wait for communication... |
---|
201 | [5781] ahci_reset_port: starting port 5 again |
---|
202 | [5781] ahci_start_port 0.5 |
---|
203 | [5781] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
204 | [5781] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
205 | [5843] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
206 | [5843] ahci_scan_ports: port 5 seems to be attached to a device; probing... |
---|
207 | [5843] ATA command for 0.5.0, slot 0: |
---|
208 | [5843] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
209 | [5843] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
210 | [5843] sg_list: 0638:7d80 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... |
---|
211 | [5843] executing polled cmd...[5875] success |
---|
212 | [5875] ATA_IDENTIFY results: |
---|
213 | 0610:2f2a 5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 Z..?7.......?... |
---|
214 | 0610:2f3a 00 00 00 00 20 20 20 20-20 20 50 4d 5a 32 41 58 .... PMZ2AX |
---|
215 | 0610:2f4a 4c 58 33 48 53 50 53 50-03 00 e4 3a 04 00 42 4d LX3HSPSP...:..BM |
---|
216 | 0610:2f5a 49 5a 36 43 52 30 54 48-35 53 31 34 31 30 47 30 IZ6CR0TH5S1410G0 |
---|
217 | 0610:2f6a 53 39 30 41 20 30 20 20-20 20 20 20 20 20 20 20 S90A 0 |
---|
218 | 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 .. |
---|
219 | 0610:2f8a 00 00 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00 .....@.......?.. |
---|
220 | 0610:2f9a 3f 00 10 fc fb 00 00 01-30 22 a5 0b 00 00 07 04 ?.......0"...... |
---|
221 | 0610:2faa 03 00 78 00 78 00 f0 00-78 00 00 00 00 00 00 00 ..x.x...x....... |
---|
222 | 0610:2fba 00 00 00 00 00 00 00 00-02 02 00 00 48 00 40 00 ............H.@. |
---|
223 | 0610:2fca fc 00 1a 00 6b 74 09 7f-63 60 69 f4 09 3c 63 60 ....kt.c`i..<c` |
---|
224 | 0610:2fda 3f 00 20 00 00 00 80 40-fe ff 00 00 fe 80 00 00 ?. ....@........ |
---|
225 | 0610:2fea 00 00 00 00 00 00 00 00-30 22 a5 0b 00 00 00 00 ........0"...... |
---|
226 | 0610:2ffa 00 00 00 00 00 00 0d 88-00 00 00 00 00 00 00 00 ................ |
---|
227 | 0610:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
228 | 0610:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
229 | 0610:302a 01 00 0b 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
230 | 0610:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
231 | 0610:304a 00 00 00 00 00 00 00 00-01 40 00 00 00 80 00 00 .........@...... |
---|
232 | 0610:305a 49 5a 00 00 00 00 32 30-25 50 00 00 00 00 00 00 IZ....20%P...... |
---|
233 | 0610:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
234 | 0610:307a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
235 | 0610:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
236 | 0610:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
237 | 0610:30aa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
238 | 0610:30ba 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
239 | 0610:30ca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
240 | 0610:30da 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
241 | 0610:30ea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
242 | 0610:30fa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
243 | 0610:310a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
244 | 0610:311a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 fa ................ |
---|
245 | [5875] found device 0.5.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
246 | [5875] ahci_stop_port 0.5 |
---|
247 | [5875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
248 | [5875] IORB 0668:8f42 removed (queue = 0610:5a4a) |
---|
249 | [5875] IORB 0668:8f42 complete (status = 0x0001, error = 0x0000) |
---|
250 | [6048] IORB 06b8:03d0 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0) |
---|
251 | [6048] IORB 06b8:03d0 removed (queue = 0610:5a4a) |
---|
252 | [6048] IORB 06b8:03d0 complete (status = 0x0001, error = 0x0000) |
---|
253 | [6048] IORB 06b8:03d0 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0) |
---|
254 | [6048] IORB 06b8:03d0 removed (queue = 0610:5a4a) |
---|
255 | [6048] IORB 06b8:03d0 complete (status = 0x0001, error = 0x0000) |
---|
256 | [6048] IORB 06c8:c56c queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0) |
---|
257 | [6048] IORB 06c8:c56c removed (queue = 0610:5a4a) |
---|
258 | [6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
259 | [6048] IORB 06c8:c56c queued (cmd = 2/1, queue = 0610:5b68 [port], timeout = 0) |
---|
260 | [6048] IORB 06c8:c56c removed (queue = 0610:5b68) |
---|
261 | [6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
262 | [6048] IORB 06c8:c56c queued (cmd = 2/1, queue = 0610:5e92 [port], timeout = 0) |
---|
263 | [6048] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
264 | [6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
265 | [6048] IORB 06c8:c56c queued (cmd = 3/3, queue = 0610:5b68 [port], timeout = 0) |
---|
266 | [6048] ahci_get_geometry(0.0.0) |
---|
267 | [6048] ahci_reset_port: resetting port 0.0 |
---|
268 | [6048] AHCI port 0 registers: |
---|
269 | PORT_CMD = 0x4002006 |
---|
270 | command engine status: |
---|
271 | PORT_SCR_ACT = 0x0 |
---|
272 | PORT_CMD_ISSUE = 0x0 |
---|
273 | link/device status: |
---|
274 | PORT_SCR_STAT = 0x221 |
---|
275 | PORT_SCR_CTL = 0x0 |
---|
276 | PORT_SCR_ERR = 0x10000 |
---|
277 | PORT_TFDATA = 0x50 |
---|
278 | interrupt status: |
---|
279 | PORT_IRQ_STAT = 0x400000 |
---|
280 | PORT_IRQ_MASK = 0x0 |
---|
281 | HOST_IRQ_STAT = 0x0 |
---|
282 | [6048] ahci_stop_port 0.0 |
---|
283 | [6048] ahci_reset_port: setting link speed and power management options |
---|
284 | [6048] ahci_reset_port: issuing COMRESET on port 0 |
---|
285 | [6050] Wait for communication... |
---|
286 | [6062] ahci_reset_port: starting port 0 again |
---|
287 | [6062] ahci_start_port 0.0 |
---|
288 | [6062] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
289 | [6062] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
290 | [6093] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
291 | [6093] ATA command for 0.0.0, slot 0: |
---|
292 | [6093] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ |
---|
293 | [6093] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
294 | [6093] sg_list: 0628:0580 aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
295 | [6093] executing polled cmd on slot 0...[6125] polled cmd error for IORB 06c8:c56c[6125] ahci_reset_port: resetting port 0.0 |
---|
296 | [6125] AHCI port 0 registers: |
---|
297 | PORT_CMD = 0x400e017 |
---|
298 | command engine status: |
---|
299 | PORT_SCR_ACT = 0x0 |
---|
300 | PORT_CMD_ISSUE = 0x0 |
---|
301 | link/device status: |
---|
302 | PORT_SCR_STAT = 0x221 |
---|
303 | PORT_SCR_CTL = 0x0 |
---|
304 | PORT_SCR_ERR = 0x10000 |
---|
305 | PORT_TFDATA = 0x50 |
---|
306 | interrupt status: |
---|
307 | PORT_IRQ_STAT = 0x400002 |
---|
308 | PORT_IRQ_MASK = 0x0 |
---|
309 | HOST_IRQ_STAT = 0x0 |
---|
310 | [6125] ahci_stop_port 0.0 |
---|
311 | [6125] ahci_reset_port: setting link speed and power management options |
---|
312 | [6125] ahci_reset_port: issuing COMRESET on port 0 |
---|
313 | [6126] Wait for communication... |
---|
314 | [6156] ahci_reset_port: starting port 0 again |
---|
315 | [6156] ahci_start_port 0.0 |
---|
316 | [6156] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
317 | [6156] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
318 | [6187] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
319 | [6187] |
---|
320 | [6187] ahci_stop_port 0.0 |
---|
321 | [6187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
322 | [6187] IORB 06c8:c56c removed (queue = 0610:5b68) |
---|
323 | [6187] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) |
---|
324 | [6187] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0) |
---|
325 | [6187] ahci_read(0.0.0, 0, 1) |
---|
326 | [6187] ahci_reset_port: resetting port 0.0 |
---|
327 | [6187] AHCI port 0 registers: |
---|
328 | PORT_CMD = 0x4002006 |
---|
329 | command engine status: |
---|
330 | PORT_SCR_ACT = 0x0 |
---|
331 | PORT_CMD_ISSUE = 0x0 |
---|
332 | link/device status: |
---|
333 | PORT_SCR_STAT = 0x123 |
---|
334 | PORT_SCR_CTL = 0x0 |
---|
335 | PORT_SCR_ERR = 0x0 |
---|
336 | PORT_TFDATA = 0x150 |
---|
337 | interrupt status: |
---|
338 | PORT_IRQ_STAT = 0x0 |
---|
339 | PORT_IRQ_MASK = 0x0 |
---|
340 | HOST_IRQ_STAT = 0x0 |
---|
341 | [6187] ahci_stop_port 0.0 |
---|
342 | [6187] ahci_reset_port: setting link speed and power management options |
---|
343 | [6187] ahci_reset_port: issuing COMRESET on port 0 |
---|
344 | [6189] Wait for communication... |
---|
345 | [6218] ahci_reset_port: starting port 0 again |
---|
346 | [6218] ahci_start_port 0.0 |
---|
347 | [6218] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
348 | [6218] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
349 | [6250] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
350 | [6250] ATA command for 0.0.0, slot 0: |
---|
351 | [6250] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ |
---|
352 | [6250] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
353 | [6250] sg_list: 0628:0580 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
354 | [6250] executing polled cmd on slot 0...[6562] polled cmd error for IORB 06c8:c56c[6562] ahci_reset_port: resetting port 0.0 |
---|
355 | [6562] AHCI port 0 registers: |
---|
356 | PORT_CMD = 0x400e017 |
---|
357 | command engine status: |
---|
358 | PORT_SCR_ACT = 0x0 |
---|
359 | PORT_CMD_ISSUE = 0x0 |
---|
360 | link/device status: |
---|
361 | PORT_SCR_STAT = 0x221 |
---|
362 | PORT_SCR_CTL = 0x0 |
---|
363 | PORT_SCR_ERR = 0x10000 |
---|
364 | PORT_TFDATA = 0x50 |
---|
365 | interrupt status: |
---|
366 | PORT_IRQ_STAT = 0x400001 |
---|
367 | PORT_IRQ_MASK = 0x0 |
---|
368 | HOST_IRQ_STAT = 0x0 |
---|
369 | [6562] ahci_stop_port 0.0 |
---|
370 | [6562] ahci_reset_port: setting link speed and power management options |
---|
371 | [6562] ahci_reset_port: issuing COMRESET on port 0 |
---|
372 | [6564] Wait for communication... |
---|
373 | [6593] ahci_reset_port: starting port 0 again |
---|
374 | [6593] ahci_start_port 0.0 |
---|
375 | [6593] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
376 | [6593] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
377 | [6625] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
378 | [6625] |
---|
379 | [6625] ahci_stop_port 0.0 |
---|
380 | [6625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
381 | [6625] IORB 06c8:c56c removed (queue = 0610:5b68) |
---|
382 | [6625] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) |
---|
383 | [6625] IORB 06c8:c56c queued (cmd = 3/3, queue = 0610:5e92 [port], timeout = 0) |
---|
384 | [6625] ahci_get_geometry(0.5.0) |
---|
385 | [6625] ahci_reset_port: resetting port 0.5 |
---|
386 | [6625] AHCI port 5 registers: |
---|
387 | PORT_CMD = 0x242006 |
---|
388 | command engine status: |
---|
389 | PORT_SCR_ACT = 0x0 |
---|
390 | PORT_CMD_ISSUE = 0x0 |
---|
391 | link/device status: |
---|
392 | PORT_SCR_STAT = 0x113 |
---|
393 | PORT_SCR_CTL = 0x0 |
---|
394 | PORT_SCR_ERR = 0x0 |
---|
395 | PORT_TFDATA = 0x50 |
---|
396 | interrupt status: |
---|
397 | PORT_IRQ_STAT = 0x0 |
---|
398 | PORT_IRQ_MASK = 0x0 |
---|
399 | HOST_IRQ_STAT = 0x0 |
---|
400 | [6625] ahci_stop_port 0.5 |
---|
401 | [6625] ahci_reset_port: setting link speed and power management options |
---|
402 | [6625] ahci_reset_port: issuing COMRESET on port 5 |
---|
403 | [6626] Wait for communication... |
---|
404 | [6656] ahci_reset_port: starting port 5 again |
---|
405 | [6656] ahci_start_port 0.5 |
---|
406 | [6656] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
407 | [6656] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
408 | [6718] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
409 | [6718] ATA command for 0.5.0, slot 0: |
---|
410 | [6718] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
411 | [6718] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
412 | [6718] sg_list: 0638:7d80 aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
413 | [6718] executing polled cmd on slot 0...[6750] Physical geometry: 16383 cylinders, 16 heads, 63 sectors per track (95396MB) (BIOS) |
---|
414 | [6750] Logical geometry: 12161 cylinders, 255 heads, 63 sectors per track (95393MB) (BIOS) |
---|
415 | [6750] is_lvm_geometry (0.5.0) |
---|
416 | [6750] ATA command for 0.5.0, slot 0: |
---|
417 | [6750] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
418 | [6750] ata_cmd: 1530:4c86 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
419 | [6750] sg_list: 0638:7d80 aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
420 | [6750] executing polled cmd...[7125] success |
---|
421 | [7125] DLA sector 62: |
---|
422 | 0610:2faa 02 52 4d 42 50 4d 46 44-21 5f 54 ce 01 ed 5e df .RMBPMFD!_T...^. |
---|
423 | 0610:2fba 01 ed 5e df 00 00 00 00-79 32 00 00 f0 00 00 00 ..^.....y2...... |
---|
424 | 0610:2fca 3f 00 00 00 44 69 73 6b-31 20 2d 20 39 35 33 39 ?...Disk1 - 9539 |
---|
425 | 0610:2fda 33 2e 33 20 4d 69 42 00-00 00 00 00 3.3 MiB..... |
---|
426 | [7125] is_lvm_geometry found at sector 62 |
---|
427 | [7125] Reported geometry: 12921 cylinders, 240 heads, 63 sectors per track (95393MB) (LVM) |
---|
428 | [7125] |
---|
429 | [7125] ahci_stop_port 0.5 |
---|
430 | [7125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
431 | [7125] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
432 | [7125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
433 | [7125] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
434 | [7125] ahci_read(0.5.0, 0, 1) |
---|
435 | [7125] ahci_reset_port: resetting port 0.5 |
---|
436 | [7125] AHCI port 5 registers: |
---|
437 | PORT_CMD = 0x242006 |
---|
438 | command engine status: |
---|
439 | PORT_SCR_ACT = 0x0 |
---|
440 | PORT_CMD_ISSUE = 0x0 |
---|
441 | link/device status: |
---|
442 | PORT_SCR_STAT = 0x113 |
---|
443 | PORT_SCR_CTL = 0x0 |
---|
444 | PORT_SCR_ERR = 0x0 |
---|
445 | PORT_TFDATA = 0x50 |
---|
446 | interrupt status: |
---|
447 | PORT_IRQ_STAT = 0x0 |
---|
448 | PORT_IRQ_MASK = 0x0 |
---|
449 | HOST_IRQ_STAT = 0x0 |
---|
450 | [7125] ahci_stop_port 0.5 |
---|
451 | [7125] ahci_reset_port: setting link speed and power management options |
---|
452 | [7125] ahci_reset_port: issuing COMRESET on port 5 |
---|
453 | [7126] Wait for communication... |
---|
454 | [7156] ahci_reset_port: starting port 5 again |
---|
455 | [7156] ahci_start_port 0.5 |
---|
456 | [7156] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
457 | [7156] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
458 | [7718] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
459 | [7718] ATA command for 0.5.0, slot 0: |
---|
460 | [7718] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
461 | [7718] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
462 | [7718] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
463 | [7718] executing polled cmd on slot 0...[8093] ata_read_pp(): blocks transferred = 1 |
---|
464 | [8093] |
---|
465 | [8093] ahci_stop_port 0.5 |
---|
466 | [8093] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
467 | [8093] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
468 | [8093] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
469 | [8093] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
470 | [8093] ahci_read(0.5.0, 62, 1) |
---|
471 | [8093] ahci_reset_port: resetting port 0.5 |
---|
472 | [8093] AHCI port 5 registers: |
---|
473 | PORT_CMD = 0x242006 |
---|
474 | command engine status: |
---|
475 | PORT_SCR_ACT = 0x0 |
---|
476 | PORT_CMD_ISSUE = 0x0 |
---|
477 | link/device status: |
---|
478 | PORT_SCR_STAT = 0x113 |
---|
479 | PORT_SCR_CTL = 0x0 |
---|
480 | PORT_SCR_ERR = 0x0 |
---|
481 | PORT_TFDATA = 0x52 |
---|
482 | interrupt status: |
---|
483 | PORT_IRQ_STAT = 0x0 |
---|
484 | PORT_IRQ_MASK = 0x0 |
---|
485 | HOST_IRQ_STAT = 0x0 |
---|
486 | [8093] ahci_stop_port 0.5 |
---|
487 | [8093] ahci_reset_port: setting link speed and power management options |
---|
488 | [8093] ahci_reset_port: issuing COMRESET on port 5 |
---|
489 | [8095] Wait for communication... |
---|
490 | [8125] ahci_reset_port: starting port 5 again |
---|
491 | [8125] ahci_start_port 0.5 |
---|
492 | [8125] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
493 | [8125] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
494 | [8656] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
495 | [8656] ATA command for 0.5.0, slot 0: |
---|
496 | [8656] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
497 | [8656] ata_cmd: 1530:47f2 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
498 | [8656] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
499 | [8656] executing polled cmd on slot 0...[9031] ata_read_pp(): blocks transferred = 1 |
---|
500 | [9031] |
---|
501 | [9031] ahci_stop_port 0.5 |
---|
502 | [9031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
503 | [9031] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
504 | [9031] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
505 | [9031] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0) |
---|
506 | [9031] ahci_read(0.0.0, 31, 1) |
---|
507 | [9031] ahci_reset_port: resetting port 0.0 |
---|
508 | [9031] AHCI port 0 registers: |
---|
509 | PORT_CMD = 0x4002006 |
---|
510 | command engine status: |
---|
511 | PORT_SCR_ACT = 0x0 |
---|
512 | PORT_CMD_ISSUE = 0x0 |
---|
513 | link/device status: |
---|
514 | PORT_SCR_STAT = 0x123 |
---|
515 | PORT_SCR_CTL = 0x0 |
---|
516 | PORT_SCR_ERR = 0x0 |
---|
517 | PORT_TFDATA = 0x150 |
---|
518 | interrupt status: |
---|
519 | PORT_IRQ_STAT = 0x0 |
---|
520 | PORT_IRQ_MASK = 0x0 |
---|
521 | HOST_IRQ_STAT = 0x0 |
---|
522 | [9031] ahci_stop_port 0.0 |
---|
523 | [9031] ahci_reset_port: setting link speed and power management options |
---|
524 | [9031] ahci_reset_port: issuing COMRESET on port 0 |
---|
525 | [9033] Wait for communication... |
---|
526 | [9062] ahci_reset_port: starting port 0 again |
---|
527 | [9062] ahci_start_port 0.0 |
---|
528 | [9062] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
529 | [9062] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
530 | [9093] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
531 | [9093] ATA command for 0.0.0, slot 0: |
---|
532 | [9093] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ |
---|
533 | [9093] ata_cmd: 1530:4c26 00 00 01 00 1f 00 00 00-00 00 c8 40 ...........@ |
---|
534 | [9093] sg_list: 0628:0580 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
535 | [9093] executing polled cmd on slot 0...[9406] polled cmd error for IORB 06c8:c56c[9406] ahci_reset_port: resetting port 0.0 |
---|
536 | [9406] AHCI port 0 registers: |
---|
537 | PORT_CMD = 0x400e017 |
---|
538 | command engine status: |
---|
539 | PORT_SCR_ACT = 0x0 |
---|
540 | PORT_CMD_ISSUE = 0x0 |
---|
541 | link/device status: |
---|
542 | PORT_SCR_STAT = 0x221 |
---|
543 | PORT_SCR_CTL = 0x0 |
---|
544 | PORT_SCR_ERR = 0x10000 |
---|
545 | PORT_TFDATA = 0x50 |
---|
546 | interrupt status: |
---|
547 | PORT_IRQ_STAT = 0x400001 |
---|
548 | PORT_IRQ_MASK = 0x0 |
---|
549 | HOST_IRQ_STAT = 0x0 |
---|
550 | [9406] ahci_stop_port 0.0 |
---|
551 | [9406] ahci_reset_port: setting link speed and power management options |
---|
552 | [9406] ahci_reset_port: issuing COMRESET on port 0 |
---|
553 | [9408] Wait for communication... |
---|
554 | [9437] ahci_reset_port: starting port 0 again |
---|
555 | [9437] ahci_start_port 0.0 |
---|
556 | [9437] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
557 | [9437] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
558 | [9468] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
559 | [9468] |
---|
560 | [9468] ahci_stop_port 0.0 |
---|
561 | [9468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
562 | [9468] IORB 06c8:c56c removed (queue = 0610:5b68) |
---|
563 | [9468] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) |
---|
564 | [9468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0) |
---|
565 | [9468] ahci_read(0.0.0, 0, 1) |
---|
566 | [9468] ahci_reset_port: resetting port 0.0 |
---|
567 | [9468] AHCI port 0 registers: |
---|
568 | PORT_CMD = 0x4002006 |
---|
569 | command engine status: |
---|
570 | PORT_SCR_ACT = 0x0 |
---|
571 | PORT_CMD_ISSUE = 0x0 |
---|
572 | link/device status: |
---|
573 | PORT_SCR_STAT = 0x123 |
---|
574 | PORT_SCR_CTL = 0x0 |
---|
575 | PORT_SCR_ERR = 0x0 |
---|
576 | PORT_TFDATA = 0x150 |
---|
577 | interrupt status: |
---|
578 | PORT_IRQ_STAT = 0x0 |
---|
579 | PORT_IRQ_MASK = 0x0 |
---|
580 | HOST_IRQ_STAT = 0x0 |
---|
581 | [9468] ahci_stop_port 0.0 |
---|
582 | [9468] ahci_reset_port: setting link speed and power management options |
---|
583 | [9468] ahci_reset_port: issuing COMRESET on port 0 |
---|
584 | [9470] Wait for communication... |
---|
585 | [9500] ahci_reset_port: starting port 0 again |
---|
586 | [9500] ahci_start_port 0.0 |
---|
587 | [9500] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
588 | [9500] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
589 | [9531] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
590 | [9531] ATA command for 0.0.0, slot 0: |
---|
591 | [9531] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ |
---|
592 | [9531] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
593 | [9531] sg_list: 0628:0580 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
594 | [9531] executing polled cmd on slot 0...[9562] polled cmd error for IORB 06c8:c56c[9562] ahci_reset_port: resetting port 0.0 |
---|
595 | [9562] AHCI port 0 registers: |
---|
596 | PORT_CMD = 0x400e017 |
---|
597 | command engine status: |
---|
598 | PORT_SCR_ACT = 0x0 |
---|
599 | PORT_CMD_ISSUE = 0x0 |
---|
600 | link/device status: |
---|
601 | PORT_SCR_STAT = 0x221 |
---|
602 | PORT_SCR_CTL = 0x0 |
---|
603 | PORT_SCR_ERR = 0x10000 |
---|
604 | PORT_TFDATA = 0x50 |
---|
605 | interrupt status: |
---|
606 | PORT_IRQ_STAT = 0x400001 |
---|
607 | PORT_IRQ_MASK = 0x0 |
---|
608 | HOST_IRQ_STAT = 0x0 |
---|
609 | [9562] ahci_stop_port 0.0 |
---|
610 | [9562] ahci_reset_port: setting link speed and power management options |
---|
611 | [9562] ahci_reset_port: issuing COMRESET on port 0 |
---|
612 | [9564] Wait for communication... |
---|
613 | [9593] ahci_reset_port: starting port 0 again |
---|
614 | [9593] ahci_start_port 0.0 |
---|
615 | [9593] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
616 | [9593] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
617 | [9625] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
618 | [9625] |
---|
619 | [9625] ahci_stop_port 0.0 |
---|
620 | [9625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
621 | [9625] IORB 06c8:c56c removed (queue = 0610:5b68) |
---|
622 | [9625] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) |
---|
623 | [9625] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
624 | [9625] ahci_read(0.5.0, 62, 1) |
---|
625 | [9625] ahci_reset_port: resetting port 0.5 |
---|
626 | [9625] AHCI port 5 registers: |
---|
627 | PORT_CMD = 0x242006 |
---|
628 | command engine status: |
---|
629 | PORT_SCR_ACT = 0x0 |
---|
630 | PORT_CMD_ISSUE = 0x0 |
---|
631 | link/device status: |
---|
632 | PORT_SCR_STAT = 0x113 |
---|
633 | PORT_SCR_CTL = 0x0 |
---|
634 | PORT_SCR_ERR = 0x0 |
---|
635 | PORT_TFDATA = 0x50 |
---|
636 | interrupt status: |
---|
637 | PORT_IRQ_STAT = 0x0 |
---|
638 | PORT_IRQ_MASK = 0x0 |
---|
639 | HOST_IRQ_STAT = 0x0 |
---|
640 | [9625] ahci_stop_port 0.5 |
---|
641 | [9625] ahci_reset_port: setting link speed and power management options |
---|
642 | [9625] ahci_reset_port: issuing COMRESET on port 5 |
---|
643 | [9626] Wait for communication... |
---|
644 | [9656] ahci_reset_port: starting port 5 again |
---|
645 | [9656] ahci_start_port 0.5 |
---|
646 | [9656] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
647 | [9656] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
648 | [10156] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
649 | [10156] ATA command for 0.5.0, slot 0: |
---|
650 | [10156] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
651 | [10156] ata_cmd: 1530:4c26 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
652 | [10156] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
653 | [10156] executing polled cmd on slot 0...[10531] ata_read_pp(): blocks transferred = 1 |
---|
654 | [10531] |
---|
655 | [10531] ahci_stop_port 0.5 |
---|
656 | [10531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
657 | [10531] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
658 | [10531] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
659 | [10531] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
660 | [10531] ahci_read(0.5.0, 0, 1) |
---|
661 | [10531] ahci_reset_port: resetting port 0.5 |
---|
662 | [10531] AHCI port 5 registers: |
---|
663 | PORT_CMD = 0x242006 |
---|
664 | command engine status: |
---|
665 | PORT_SCR_ACT = 0x0 |
---|
666 | PORT_CMD_ISSUE = 0x0 |
---|
667 | link/device status: |
---|
668 | PORT_SCR_STAT = 0x113 |
---|
669 | PORT_SCR_CTL = 0x0 |
---|
670 | PORT_SCR_ERR = 0x0 |
---|
671 | PORT_TFDATA = 0x50 |
---|
672 | interrupt status: |
---|
673 | PORT_IRQ_STAT = 0x0 |
---|
674 | PORT_IRQ_MASK = 0x0 |
---|
675 | HOST_IRQ_STAT = 0x0 |
---|
676 | [10531] ahci_stop_port 0.5 |
---|
677 | [10531] ahci_reset_port: setting link speed and power management options |
---|
678 | [10531] ahci_reset_port: issuing COMRESET on port 5 |
---|
679 | [10533] Wait for communication... |
---|
680 | [10562] ahci_reset_port: starting port 5 again |
---|
681 | [10562] ahci_start_port 0.5 |
---|
682 | [10562] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
683 | [10562] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
684 | [11093] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
685 | [11093] ATA command for 0.5.0, slot 0: |
---|
686 | [11093] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
687 | [11093] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
688 | [11093] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
689 | [11093] executing polled cmd on slot 0...[11468] ata_read_pp(): blocks transferred = 1 |
---|
690 | [11468] |
---|
691 | [11468] ahci_stop_port 0.5 |
---|
692 | [11468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
693 | [11468] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
694 | [11468] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
695 | [11468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
696 | [11468] ahci_read(0.5.0, 63, 1) |
---|
697 | [11468] ahci_reset_port: resetting port 0.5 |
---|
698 | [11468] AHCI port 5 registers: |
---|
699 | PORT_CMD = 0x242006 |
---|
700 | command engine status: |
---|
701 | PORT_SCR_ACT = 0x0 |
---|
702 | PORT_CMD_ISSUE = 0x0 |
---|
703 | link/device status: |
---|
704 | PORT_SCR_STAT = 0x113 |
---|
705 | PORT_SCR_CTL = 0x0 |
---|
706 | PORT_SCR_ERR = 0x0 |
---|
707 | PORT_TFDATA = 0x52 |
---|
708 | interrupt status: |
---|
709 | PORT_IRQ_STAT = 0x0 |
---|
710 | PORT_IRQ_MASK = 0x0 |
---|
711 | HOST_IRQ_STAT = 0x0 |
---|
712 | [11468] ahci_stop_port 0.5 |
---|
713 | [11468] ahci_reset_port: setting link speed and power management options |
---|
714 | [11468] ahci_reset_port: issuing COMRESET on port 5 |
---|
715 | [11470] Wait for communication... |
---|
716 | [11500] ahci_reset_port: starting port 5 again |
---|
717 | [11500] ahci_start_port 0.5 |
---|
718 | [11500] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
719 | [11500] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
720 | [12031] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
721 | [12031] ATA command for 0.5.0, slot 0: |
---|
722 | [12031] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
723 | [12031] ata_cmd: 1530:4c24 00 00 01 00 3f 00 00 00-00 00 c8 40 ....?......@ |
---|
724 | [12031] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
725 | [12031] executing polled cmd on slot 0...[12406] ata_read_pp(): blocks transferred = 1 |
---|
726 | [12406] |
---|
727 | [12406] ahci_stop_port 0.5 |
---|
728 | [12406] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
729 | [12406] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
730 | [12406] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
731 | [12406] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
732 | [12406] ahci_read(0.5.0, 20487662, 1) |
---|
733 | [12406] ahci_reset_port: resetting port 0.5 |
---|
734 | [12406] AHCI port 5 registers: |
---|
735 | PORT_CMD = 0x242006 |
---|
736 | command engine status: |
---|
737 | PORT_SCR_ACT = 0x0 |
---|
738 | PORT_CMD_ISSUE = 0x0 |
---|
739 | link/device status: |
---|
740 | PORT_SCR_STAT = 0x113 |
---|
741 | PORT_SCR_CTL = 0x0 |
---|
742 | PORT_SCR_ERR = 0x0 |
---|
743 | PORT_TFDATA = 0x50 |
---|
744 | interrupt status: |
---|
745 | PORT_IRQ_STAT = 0x0 |
---|
746 | PORT_IRQ_MASK = 0x0 |
---|
747 | HOST_IRQ_STAT = 0x0 |
---|
748 | [12406] ahci_stop_port 0.5 |
---|
749 | [12406] ahci_reset_port: setting link speed and power management options |
---|
750 | [12406] ahci_reset_port: issuing COMRESET on port 5 |
---|
751 | [12408] Wait for communication... |
---|
752 | [12437] ahci_reset_port: starting port 5 again |
---|
753 | [12437] ahci_start_port 0.5 |
---|
754 | [12437] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
755 | [12437] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
756 | [12968] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
757 | [12968] ATA command for 0.5.0, slot 0: |
---|
758 | [12968] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
759 | [12968] ata_cmd: 1530:4c04 00 00 01 00 ee 9d 38 00-00 00 c8 41 ......8....A |
---|
760 | [12968] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
761 | [12968] executing polled cmd on slot 0...[13343] ata_read_pp(): blocks transferred = 1 |
---|
762 | [13343] |
---|
763 | [13343] ahci_stop_port 0.5 |
---|
764 | [13343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
765 | [13343] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
766 | [13343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
767 | [13343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
768 | [13343] ahci_read(0.5.0, 20487600, 1) |
---|
769 | [13343] ahci_reset_port: resetting port 0.5 |
---|
770 | [13343] AHCI port 5 registers: |
---|
771 | PORT_CMD = 0x242006 |
---|
772 | command engine status: |
---|
773 | PORT_SCR_ACT = 0x0 |
---|
774 | PORT_CMD_ISSUE = 0x0 |
---|
775 | link/device status: |
---|
776 | PORT_SCR_STAT = 0x113 |
---|
777 | PORT_SCR_CTL = 0x0 |
---|
778 | PORT_SCR_ERR = 0x0 |
---|
779 | PORT_TFDATA = 0x50 |
---|
780 | interrupt status: |
---|
781 | PORT_IRQ_STAT = 0x0 |
---|
782 | PORT_IRQ_MASK = 0x0 |
---|
783 | HOST_IRQ_STAT = 0x0 |
---|
784 | [13343] ahci_stop_port 0.5 |
---|
785 | [13343] ahci_reset_port: setting link speed and power management options |
---|
786 | [13343] ahci_reset_port: issuing COMRESET on port 5 |
---|
787 | [13345] Wait for communication... |
---|
788 | [13375] ahci_reset_port: starting port 5 again |
---|
789 | [13375] ahci_start_port 0.5 |
---|
790 | [13375] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
791 | [13375] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
792 | [13968] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
793 | [13968] ATA command for 0.5.0, slot 0: |
---|
794 | [13968] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
795 | [13968] ata_cmd: 1530:4c0a 00 00 01 00 b0 9d 38 00-00 00 c8 41 ......8....A |
---|
796 | [13968] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
797 | [13968] executing polled cmd on slot 0...[14343] ata_read_pp(): blocks transferred = 1 |
---|
798 | [14343] |
---|
799 | [14343] ahci_stop_port 0.5 |
---|
800 | [14343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
801 | [14343] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
802 | [14343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
803 | [14343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
804 | [14343] ahci_read(0.5.0, 20487663, 1) |
---|
805 | [14343] ahci_reset_port: resetting port 0.5 |
---|
806 | [14343] AHCI port 5 registers: |
---|
807 | PORT_CMD = 0x242006 |
---|
808 | command engine status: |
---|
809 | PORT_SCR_ACT = 0x0 |
---|
810 | PORT_CMD_ISSUE = 0x0 |
---|
811 | link/device status: |
---|
812 | PORT_SCR_STAT = 0x113 |
---|
813 | PORT_SCR_CTL = 0x0 |
---|
814 | PORT_SCR_ERR = 0x0 |
---|
815 | PORT_TFDATA = 0x50 |
---|
816 | interrupt status: |
---|
817 | PORT_IRQ_STAT = 0x0 |
---|
818 | PORT_IRQ_MASK = 0x0 |
---|
819 | HOST_IRQ_STAT = 0x0 |
---|
820 | [14343] ahci_stop_port 0.5 |
---|
821 | [14343] ahci_reset_port: setting link speed and power management options |
---|
822 | [14343] ahci_reset_port: issuing COMRESET on port 5 |
---|
823 | [14345] Wait for communication... |
---|
824 | [14375] ahci_reset_port: starting port 5 again |
---|
825 | [14375] ahci_start_port 0.5 |
---|
826 | [14375] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
827 | [14375] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
828 | [14937] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
829 | [14937] ATA command for 0.5.0, slot 0: |
---|
830 | [14937] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
831 | [14937] ata_cmd: 1530:4c02 00 00 01 00 ef 9d 38 00-00 00 c8 41 ......8....A |
---|
832 | [14937] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
833 | [14937] executing polled cmd on slot 0...[15312] ata_read_pp(): blocks transferred = 1 |
---|
834 | [15312] |
---|
835 | [15312] ahci_stop_port 0.5 |
---|
836 | [15312] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
837 | [15312] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
838 | [15312] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
839 | [15312] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
840 | [15312] ahci_read(0.5.0, 61447742, 1) |
---|
841 | [15312] ahci_reset_port: resetting port 0.5 |
---|
842 | [15312] AHCI port 5 registers: |
---|
843 | PORT_CMD = 0x242006 |
---|
844 | command engine status: |
---|
845 | PORT_SCR_ACT = 0x0 |
---|
846 | PORT_CMD_ISSUE = 0x0 |
---|
847 | link/device status: |
---|
848 | PORT_SCR_STAT = 0x113 |
---|
849 | PORT_SCR_CTL = 0x0 |
---|
850 | PORT_SCR_ERR = 0x0 |
---|
851 | PORT_TFDATA = 0x50 |
---|
852 | interrupt status: |
---|
853 | PORT_IRQ_STAT = 0x0 |
---|
854 | PORT_IRQ_MASK = 0x0 |
---|
855 | HOST_IRQ_STAT = 0x0 |
---|
856 | [15312] ahci_stop_port 0.5 |
---|
857 | [15312] ahci_reset_port: setting link speed and power management options |
---|
858 | [15312] ahci_reset_port: issuing COMRESET on port 5 |
---|
859 | [15314] Wait for communication... |
---|
860 | [15343] ahci_reset_port: starting port 5 again |
---|
861 | [15343] ahci_start_port 0.5 |
---|
862 | [15343] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
863 | [15343] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
864 | [15875] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
865 | [15875] ATA command for 0.5.0, slot 0: |
---|
866 | [15875] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
867 | [15875] ata_cmd: 1530:4c04 00 00 01 00 3e 9e a9 00-00 00 c8 43 ....>......C |
---|
868 | [15875] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
869 | [15875] executing polled cmd on slot 0...[16250] ata_read_pp(): blocks transferred = 1 |
---|
870 | [16250] |
---|
871 | [16250] ahci_stop_port 0.5 |
---|
872 | [16250] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
873 | [16250] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
874 | [16250] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
875 | [16250] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
876 | [16250] ahci_read(0.5.0, 61447680, 1) |
---|
877 | [16250] ahci_reset_port: resetting port 0.5 |
---|
878 | [16250] AHCI port 5 registers: |
---|
879 | PORT_CMD = 0x242006 |
---|
880 | command engine status: |
---|
881 | PORT_SCR_ACT = 0x0 |
---|
882 | PORT_CMD_ISSUE = 0x0 |
---|
883 | link/device status: |
---|
884 | PORT_SCR_STAT = 0x113 |
---|
885 | PORT_SCR_CTL = 0x0 |
---|
886 | PORT_SCR_ERR = 0x0 |
---|
887 | PORT_TFDATA = 0x50 |
---|
888 | interrupt status: |
---|
889 | PORT_IRQ_STAT = 0x0 |
---|
890 | PORT_IRQ_MASK = 0x0 |
---|
891 | HOST_IRQ_STAT = 0x0 |
---|
892 | [16250] ahci_stop_port 0.5 |
---|
893 | [16250] ahci_reset_port: setting link speed and power management options |
---|
894 | [16250] ahci_reset_port: issuing COMRESET on port 5 |
---|
895 | [16251] Wait for communication... |
---|
896 | [16281] ahci_reset_port: starting port 5 again |
---|
897 | [16281] ahci_start_port 0.5 |
---|
898 | [16281] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
899 | [16281] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
900 | [16812] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
901 | [16812] ATA command for 0.5.0, slot 0: |
---|
902 | [16812] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
903 | [16812] ata_cmd: 1530:4c0a 00 00 01 00 00 9e a9 00-00 00 c8 43 ...........C |
---|
904 | [16812] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
905 | [16812] executing polled cmd on slot 0...[17187] ata_read_pp(): blocks transferred = 1 |
---|
906 | [17187] |
---|
907 | [17187] ahci_stop_port 0.5 |
---|
908 | [17187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
909 | [17187] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
910 | [17187] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
911 | [17187] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
912 | [17187] ahci_read(0.5.0, 61447743, 1) |
---|
913 | [17187] ahci_reset_port: resetting port 0.5 |
---|
914 | [17187] AHCI port 5 registers: |
---|
915 | PORT_CMD = 0x242006 |
---|
916 | command engine status: |
---|
917 | PORT_SCR_ACT = 0x0 |
---|
918 | PORT_CMD_ISSUE = 0x0 |
---|
919 | link/device status: |
---|
920 | PORT_SCR_STAT = 0x113 |
---|
921 | PORT_SCR_CTL = 0x0 |
---|
922 | PORT_SCR_ERR = 0x0 |
---|
923 | PORT_TFDATA = 0x50 |
---|
924 | interrupt status: |
---|
925 | PORT_IRQ_STAT = 0x0 |
---|
926 | PORT_IRQ_MASK = 0x0 |
---|
927 | HOST_IRQ_STAT = 0x0 |
---|
928 | [17187] ahci_stop_port 0.5 |
---|
929 | [17187] ahci_reset_port: setting link speed and power management options |
---|
930 | [17187] ahci_reset_port: issuing COMRESET on port 5 |
---|
931 | [17189] Wait for communication... |
---|
932 | [17218] ahci_reset_port: starting port 5 again |
---|
933 | [17218] ahci_start_port 0.5 |
---|
934 | [17218] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
935 | [17218] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
936 | [17750] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
937 | [17750] ATA command for 0.5.0, slot 0: |
---|
938 | [17750] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
939 | [17750] ata_cmd: 1530:4c02 00 00 01 00 3f 9e a9 00-00 00 c8 43 ....?......C |
---|
940 | [17750] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
941 | [17750] executing polled cmd on slot 0...[18125] ata_read_pp(): blocks transferred = 1 |
---|
942 | [18125] |
---|
943 | [18125] ahci_stop_port 0.5 |
---|
944 | [18125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
945 | [18125] IORB 06c8:c56c removed (queue = 0610:5e92) |
---|
946 | [18125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) |
---|
947 | [18130] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
948 | [18130] ahci_read(0.5.0, 61447679, 1) |
---|
949 | [18130] ahci_reset_port: resetting port 0.5 |
---|
950 | [18130] AHCI port 5 registers: |
---|
951 | PORT_CMD = 0x242006 |
---|
952 | command engine status: |
---|
953 | PORT_SCR_ACT = 0x0 |
---|
954 | PORT_CMD_ISSUE = 0x0 |
---|
955 | link/device status: |
---|
956 | PORT_SCR_STAT = 0x113 |
---|
957 | PORT_SCR_CTL = 0x0 |
---|
958 | PORT_SCR_ERR = 0x0 |
---|
959 | PORT_TFDATA = 0x50 |
---|
960 | interrupt status: |
---|
961 | PORT_IRQ_STAT = 0x0 |
---|
962 | PORT_IRQ_MASK = 0x0 |
---|
963 | HOST_IRQ_STAT = 0x0 |
---|
964 | [18130] ahci_stop_port 0.5 |
---|
965 | [18130] ahci_reset_port: setting link speed and power management options |
---|
966 | [18130] ahci_reset_port: issuing COMRESET on port 5 |
---|
967 | [18132] Wait for communication... |
---|
968 | [18156] ahci_reset_port: starting port 5 again |
---|
969 | [18156] ahci_start_port 0.5 |
---|
970 | [18156] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
971 | [18156] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
972 | [18687] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
973 | [18687] ATA command for 0.5.0, slot 0: |
---|
974 | [18687] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
975 | [18687] ata_cmd: 1530:4b02 00 00 01 00 ff 9d a9 00-00 00 c8 43 ...........C |
---|
976 | [18687] sg_list: 0638:7d80 28 42 88 bc 00 00 00 00-00 00 00 00 ff 01 00 00 (B.............. |
---|
977 | [18687] executing polled cmd on slot 0...[19062] ata_read_pp(): blocks transferred = 1 |
---|
978 | [19062] |
---|
979 | [19062] ahci_stop_port 0.5 |
---|
980 | [19062] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
981 | [19062] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
982 | [19062] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
983 | [19062] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
984 | [19062] ahci_read(0.5.0, 186293519, 1) |
---|
985 | [19062] ahci_reset_port: resetting port 0.5 |
---|
986 | [19062] AHCI port 5 registers: |
---|
987 | PORT_CMD = 0x242006 |
---|
988 | command engine status: |
---|
989 | PORT_SCR_ACT = 0x0 |
---|
990 | PORT_CMD_ISSUE = 0x0 |
---|
991 | link/device status: |
---|
992 | PORT_SCR_STAT = 0x113 |
---|
993 | PORT_SCR_CTL = 0x0 |
---|
994 | PORT_SCR_ERR = 0x0 |
---|
995 | PORT_TFDATA = 0x50 |
---|
996 | interrupt status: |
---|
997 | PORT_IRQ_STAT = 0x0 |
---|
998 | PORT_IRQ_MASK = 0x0 |
---|
999 | HOST_IRQ_STAT = 0x0 |
---|
1000 | [19062] ahci_stop_port 0.5 |
---|
1001 | [19062] ahci_reset_port: setting link speed and power management options |
---|
1002 | [19062] ahci_reset_port: issuing COMRESET on port 5 |
---|
1003 | [19064] Wait for communication... |
---|
1004 | [19093] ahci_reset_port: starting port 5 again |
---|
1005 | [19093] ahci_start_port 0.5 |
---|
1006 | [19093] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1007 | [19093] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1008 | [19625] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1009 | [19625] ATA command for 0.5.0, slot 0: |
---|
1010 | [19625] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1011 | [19625] ata_cmd: 1530:4b02 00 00 01 00 0f 9d 1a 00-00 00 c8 4b ...........K |
---|
1012 | [19625] sg_list: 0638:7d80 c4 4d 91 bc 00 00 00 00-00 00 00 00 ff 01 00 00 .M.............. |
---|
1013 | [19625] executing polled cmd on slot 0...[20000] ata_read_pp(): blocks transferred = 1 |
---|
1014 | [20000] |
---|
1015 | [20000] ahci_stop_port 0.5 |
---|
1016 | [20000] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1017 | [20000] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1018 | [20000] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1019 | [20000] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1020 | [20000] ahci_read(0.5.0, 61443452, 1) |
---|
1021 | [20000] ahci_reset_port: resetting port 0.5 |
---|
1022 | [20000] AHCI port 5 registers: |
---|
1023 | PORT_CMD = 0x242006 |
---|
1024 | command engine status: |
---|
1025 | PORT_SCR_ACT = 0x0 |
---|
1026 | PORT_CMD_ISSUE = 0x0 |
---|
1027 | link/device status: |
---|
1028 | PORT_SCR_STAT = 0x113 |
---|
1029 | PORT_SCR_CTL = 0x0 |
---|
1030 | PORT_SCR_ERR = 0x0 |
---|
1031 | PORT_TFDATA = 0x50 |
---|
1032 | interrupt status: |
---|
1033 | PORT_IRQ_STAT = 0x0 |
---|
1034 | PORT_IRQ_MASK = 0x0 |
---|
1035 | HOST_IRQ_STAT = 0x0 |
---|
1036 | [20000] ahci_stop_port 0.5 |
---|
1037 | [20001] ahci_reset_port: setting link speed and power management options |
---|
1038 | [20001] ahci_reset_port: issuing COMRESET on port 5 |
---|
1039 | [20003] Wait for communication... |
---|
1040 | [20031] ahci_reset_port: starting port 5 again |
---|
1041 | [20031] ahci_start_port 0.5 |
---|
1042 | [20031] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1043 | [20031] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1044 | [20562] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1045 | [20562] ATA command for 0.5.0, slot 0: |
---|
1046 | [20562] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1047 | [20562] ata_cmd: 1530:4ad2 00 00 01 00 7c 8d a9 00-00 00 c8 43 ....|......C |
---|
1048 | [20562] sg_list: 0638:7d80 d0 ad 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
1049 | [20562] executing polled cmd on slot 0...[20937] ata_read_pp(): blocks transferred = 1 |
---|
1050 | [20937] |
---|
1051 | [20937] ahci_stop_port 0.5 |
---|
1052 | [20937] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1053 | [20937] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1054 | [20937] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1055 | [20937] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1056 | [20937] ahci_read(0.5.0, 61443452, 68) |
---|
1057 | [20937] ahci_reset_port: resetting port 0.5 |
---|
1058 | [20937] AHCI port 5 registers: |
---|
1059 | PORT_CMD = 0x242006 |
---|
1060 | command engine status: |
---|
1061 | PORT_SCR_ACT = 0x0 |
---|
1062 | PORT_CMD_ISSUE = 0x0 |
---|
1063 | link/device status: |
---|
1064 | PORT_SCR_STAT = 0x113 |
---|
1065 | PORT_SCR_CTL = 0x0 |
---|
1066 | PORT_SCR_ERR = 0x0 |
---|
1067 | PORT_TFDATA = 0x50 |
---|
1068 | interrupt status: |
---|
1069 | PORT_IRQ_STAT = 0x0 |
---|
1070 | PORT_IRQ_MASK = 0x0 |
---|
1071 | HOST_IRQ_STAT = 0x0 |
---|
1072 | [20937] ahci_stop_port 0.5 |
---|
1073 | [20937] ahci_reset_port: setting link speed and power management options |
---|
1074 | [20937] ahci_reset_port: issuing COMRESET on port 5 |
---|
1075 | [20939] Wait for communication... |
---|
1076 | [20968] ahci_reset_port: starting port 5 again |
---|
1077 | [20968] ahci_start_port 0.5 |
---|
1078 | [20968] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1079 | [20968] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1080 | [21500] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1081 | [21500] ATA command for 0.5.0, slot 0: |
---|
1082 | [21500] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1083 | [21500] ata_cmd: 1530:4ad2 00 00 44 00 7c 8d a9 00-00 00 c8 43 ..D.|......C |
---|
1084 | [21500] sg_list: 0638:7d80 24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... |
---|
1085 | [21500] executing polled cmd on slot 0...[21875] ata_read_pp(): blocks transferred = 68 |
---|
1086 | [21875] |
---|
1087 | [21875] ahci_stop_port 0.5 |
---|
1088 | [21875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1089 | [21875] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1090 | [21875] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1091 | [21875] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1092 | [21875] ahci_read(0.5.0, 61443384, 1) |
---|
1093 | [21875] ahci_reset_port: resetting port 0.5 |
---|
1094 | [21875] AHCI port 5 registers: |
---|
1095 | PORT_CMD = 0x242006 |
---|
1096 | command engine status: |
---|
1097 | PORT_SCR_ACT = 0x0 |
---|
1098 | PORT_CMD_ISSUE = 0x0 |
---|
1099 | link/device status: |
---|
1100 | PORT_SCR_STAT = 0x113 |
---|
1101 | PORT_SCR_CTL = 0x0 |
---|
1102 | PORT_SCR_ERR = 0x0 |
---|
1103 | PORT_TFDATA = 0x50 |
---|
1104 | interrupt status: |
---|
1105 | PORT_IRQ_STAT = 0x0 |
---|
1106 | PORT_IRQ_MASK = 0x0 |
---|
1107 | HOST_IRQ_STAT = 0x0 |
---|
1108 | [21875] ahci_stop_port 0.5 |
---|
1109 | [21875] ahci_reset_port: setting link speed and power management options |
---|
1110 | [21875] ahci_reset_port: issuing COMRESET on port 5 |
---|
1111 | [21876] Wait for communication... |
---|
1112 | [21906] ahci_reset_port: starting port 5 again |
---|
1113 | [21906] ahci_start_port 0.5 |
---|
1114 | [21906] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1115 | [21906] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1116 | [22437] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1117 | [22437] ATA command for 0.5.0, slot 0: |
---|
1118 | [22437] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1119 | [22437] ata_cmd: 1530:4ad2 00 00 01 00 38 8d a9 00-00 00 c8 43 ....8......C |
---|
1120 | [22437] sg_list: 0638:7d80 24 1e 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 $............... |
---|
1121 | [22437] executing polled cmd on slot 0...[22812] ata_read_pp(): blocks transferred = 1 |
---|
1122 | [22812] |
---|
1123 | [22812] ahci_stop_port 0.5 |
---|
1124 | [22812] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1125 | [22812] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1126 | [22812] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1127 | [22812] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1128 | [22812] ahci_read(0.5.0, 61443384, 68) |
---|
1129 | [22812] ahci_reset_port: resetting port 0.5 |
---|
1130 | [22812] AHCI port 5 registers: |
---|
1131 | PORT_CMD = 0x242006 |
---|
1132 | command engine status: |
---|
1133 | PORT_SCR_ACT = 0x0 |
---|
1134 | PORT_CMD_ISSUE = 0x0 |
---|
1135 | link/device status: |
---|
1136 | PORT_SCR_STAT = 0x113 |
---|
1137 | PORT_SCR_CTL = 0x0 |
---|
1138 | PORT_SCR_ERR = 0x0 |
---|
1139 | PORT_TFDATA = 0x50 |
---|
1140 | interrupt status: |
---|
1141 | PORT_IRQ_STAT = 0x0 |
---|
1142 | PORT_IRQ_MASK = 0x0 |
---|
1143 | HOST_IRQ_STAT = 0x0 |
---|
1144 | [22812] ahci_stop_port 0.5 |
---|
1145 | [22812] ahci_reset_port: setting link speed and power management options |
---|
1146 | [22812] ahci_reset_port: issuing COMRESET on port 5 |
---|
1147 | [22814] Wait for communication... |
---|
1148 | [22843] ahci_reset_port: starting port 5 again |
---|
1149 | [22843] ahci_start_port 0.5 |
---|
1150 | [22843] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1151 | [22843] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1152 | [23375] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1153 | [23375] ATA command for 0.5.0, slot 0: |
---|
1154 | [23375] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1155 | [23375] ata_cmd: 1530:4ad2 00 00 44 00 38 8d a9 00-00 00 c8 43 ..D.8......C |
---|
1156 | [23375] sg_list: 0638:7d80 24 80 81 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... |
---|
1157 | [23375] executing polled cmd on slot 0...[23750] ata_read_pp(): blocks transferred = 68 |
---|
1158 | [23750] |
---|
1159 | [23750] ahci_stop_port 0.5 |
---|
1160 | [23750] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1161 | [23750] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1162 | [23750] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1163 | [23750] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1164 | [23750] ahci_read(0.5.0, 186289292, 1) |
---|
1165 | [23750] ahci_reset_port: resetting port 0.5 |
---|
1166 | [23750] AHCI port 5 registers: |
---|
1167 | PORT_CMD = 0x242006 |
---|
1168 | command engine status: |
---|
1169 | PORT_SCR_ACT = 0x0 |
---|
1170 | PORT_CMD_ISSUE = 0x0 |
---|
1171 | link/device status: |
---|
1172 | PORT_SCR_STAT = 0x113 |
---|
1173 | PORT_SCR_CTL = 0x0 |
---|
1174 | PORT_SCR_ERR = 0x0 |
---|
1175 | PORT_TFDATA = 0x50 |
---|
1176 | interrupt status: |
---|
1177 | PORT_IRQ_STAT = 0x0 |
---|
1178 | PORT_IRQ_MASK = 0x0 |
---|
1179 | HOST_IRQ_STAT = 0x0 |
---|
1180 | [23750] ahci_stop_port 0.5 |
---|
1181 | [23750] ahci_reset_port: setting link speed and power management options |
---|
1182 | [23750] ahci_reset_port: issuing COMRESET on port 5 |
---|
1183 | [23751] Wait for communication... |
---|
1184 | [23781] ahci_reset_port: starting port 5 again |
---|
1185 | [23781] ahci_start_port 0.5 |
---|
1186 | [23781] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1187 | [23781] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1188 | [24312] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1189 | [24312] ATA command for 0.5.0, slot 0: |
---|
1190 | [24312] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1191 | [24312] ata_cmd: 1530:4ad2 00 00 01 00 8c 8c 1a 00-00 00 c8 4b ...........K |
---|
1192 | [24312] sg_list: 0638:7d80 d4 05 82 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
1193 | [24312] executing polled cmd on slot 0...[24687] ata_read_pp(): blocks transferred = 1 |
---|
1194 | [24687] |
---|
1195 | [24687] ahci_stop_port 0.5 |
---|
1196 | [24687] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1197 | [24687] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1198 | [24687] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1199 | [24687] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1200 | [24687] ahci_read(0.5.0, 186289292, 68) |
---|
1201 | [24687] ahci_reset_port: resetting port 0.5 |
---|
1202 | [24687] AHCI port 5 registers: |
---|
1203 | PORT_CMD = 0x242006 |
---|
1204 | command engine status: |
---|
1205 | PORT_SCR_ACT = 0x0 |
---|
1206 | PORT_CMD_ISSUE = 0x0 |
---|
1207 | link/device status: |
---|
1208 | PORT_SCR_STAT = 0x113 |
---|
1209 | PORT_SCR_CTL = 0x0 |
---|
1210 | PORT_SCR_ERR = 0x0 |
---|
1211 | PORT_TFDATA = 0x50 |
---|
1212 | interrupt status: |
---|
1213 | PORT_IRQ_STAT = 0x0 |
---|
1214 | PORT_IRQ_MASK = 0x0 |
---|
1215 | HOST_IRQ_STAT = 0x0 |
---|
1216 | [24687] ahci_stop_port 0.5 |
---|
1217 | [24687] ahci_reset_port: setting link speed and power management options |
---|
1218 | [24687] ahci_reset_port: issuing COMRESET on port 5 |
---|
1219 | [24689] Wait for communication... |
---|
1220 | [24718] ahci_reset_port: starting port 5 again |
---|
1221 | [24718] ahci_start_port 0.5 |
---|
1222 | [24718] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1223 | [24718] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1224 | [25250] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1225 | [25250] ATA command for 0.5.0, slot 0: |
---|
1226 | [25250] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1227 | [25250] ata_cmd: 1530:4ad2 00 00 44 00 8c 8c 1a 00-00 00 c8 4b ..D........K |
---|
1228 | [25250] sg_list: 0638:7d80 24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... |
---|
1229 | [25250] executing polled cmd on slot 0...[25625] ata_read_pp(): blocks transferred = 68 |
---|
1230 | [25625] |
---|
1231 | [25625] ahci_stop_port 0.5 |
---|
1232 | [25625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1233 | [25625] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1234 | [25625] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1235 | [25625] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1236 | [25625] ahci_read(0.5.0, 186289224, 1) |
---|
1237 | [25625] ahci_reset_port: resetting port 0.5 |
---|
1238 | [25625] AHCI port 5 registers: |
---|
1239 | PORT_CMD = 0x242006 |
---|
1240 | command engine status: |
---|
1241 | PORT_SCR_ACT = 0x0 |
---|
1242 | PORT_CMD_ISSUE = 0x0 |
---|
1243 | link/device status: |
---|
1244 | PORT_SCR_STAT = 0x113 |
---|
1245 | PORT_SCR_CTL = 0x0 |
---|
1246 | PORT_SCR_ERR = 0x0 |
---|
1247 | PORT_TFDATA = 0x50 |
---|
1248 | interrupt status: |
---|
1249 | PORT_IRQ_STAT = 0x0 |
---|
1250 | PORT_IRQ_MASK = 0x0 |
---|
1251 | HOST_IRQ_STAT = 0x0 |
---|
1252 | [25625] ahci_stop_port 0.5 |
---|
1253 | [25625] ahci_reset_port: setting link speed and power management options |
---|
1254 | [25625] ahci_reset_port: issuing COMRESET on port 5 |
---|
1255 | [25626] Wait for communication... |
---|
1256 | [25656] ahci_reset_port: starting port 5 again |
---|
1257 | [25656] ahci_start_port 0.5 |
---|
1258 | [25656] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1259 | [25656] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1260 | [26187] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1261 | [26187] ATA command for 0.5.0, slot 0: |
---|
1262 | [26187] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1263 | [26187] ata_cmd: 1530:4ad2 00 00 01 00 48 8c 1a 00-00 00 c8 4b ....H......K |
---|
1264 | [26187] sg_list: 0638:7d80 e8 1d 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
1265 | [26187] executing polled cmd on slot 0...[26562] ata_read_pp(): blocks transferred = 1 |
---|
1266 | [26562] |
---|
1267 | [26562] ahci_stop_port 0.5 |
---|
1268 | [26562] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1269 | [26562] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1270 | [26562] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1271 | [26562] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1272 | [26562] ahci_read(0.5.0, 186289224, 68) |
---|
1273 | [26562] ahci_reset_port: resetting port 0.5 |
---|
1274 | [26562] AHCI port 5 registers: |
---|
1275 | PORT_CMD = 0x242006 |
---|
1276 | command engine status: |
---|
1277 | PORT_SCR_ACT = 0x0 |
---|
1278 | PORT_CMD_ISSUE = 0x0 |
---|
1279 | link/device status: |
---|
1280 | PORT_SCR_STAT = 0x113 |
---|
1281 | PORT_SCR_CTL = 0x0 |
---|
1282 | PORT_SCR_ERR = 0x0 |
---|
1283 | PORT_TFDATA = 0x50 |
---|
1284 | interrupt status: |
---|
1285 | PORT_IRQ_STAT = 0x0 |
---|
1286 | PORT_IRQ_MASK = 0x0 |
---|
1287 | HOST_IRQ_STAT = 0x0 |
---|
1288 | [26562] ahci_stop_port 0.5 |
---|
1289 | [26562] ahci_reset_port: setting link speed and power management options |
---|
1290 | [26562] ahci_reset_port: issuing COMRESET on port 5 |
---|
1291 | [26564] Wait for communication... |
---|
1292 | [26593] ahci_reset_port: starting port 5 again |
---|
1293 | [26593] ahci_start_port 0.5 |
---|
1294 | [26593] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1295 | [26593] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1296 | [27156] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1297 | [27156] ATA command for 0.5.0, slot 0: |
---|
1298 | [27156] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1299 | [27156] ata_cmd: 1530:4ad2 00 00 44 00 48 8c 1a 00-00 00 c8 4b ..D.H......K |
---|
1300 | [27156] sg_list: 0638:7d80 24 f0 80 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... |
---|
1301 | [27156] executing polled cmd on slot 0...[27531] ata_read_pp(): blocks transferred = 68 |
---|
1302 | [27531] |
---|
1303 | [27531] ahci_stop_port 0.5 |
---|
1304 | [27531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1305 | [27531] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1306 | [27531] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1307 | [27531] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1308 | [27531] ahci_read(0.5.0, 61443380, 4) |
---|
1309 | [27531] ahci_reset_port: resetting port 0.5 |
---|
1310 | [27531] AHCI port 5 registers: |
---|
1311 | PORT_CMD = 0x242006 |
---|
1312 | command engine status: |
---|
1313 | PORT_SCR_ACT = 0x0 |
---|
1314 | PORT_CMD_ISSUE = 0x0 |
---|
1315 | link/device status: |
---|
1316 | PORT_SCR_STAT = 0x113 |
---|
1317 | PORT_SCR_CTL = 0x0 |
---|
1318 | PORT_SCR_ERR = 0x0 |
---|
1319 | PORT_TFDATA = 0x50 |
---|
1320 | interrupt status: |
---|
1321 | PORT_IRQ_STAT = 0x0 |
---|
1322 | PORT_IRQ_MASK = 0x0 |
---|
1323 | HOST_IRQ_STAT = 0x0 |
---|
1324 | [27531] ahci_stop_port 0.5 |
---|
1325 | [27531] ahci_reset_port: setting link speed and power management options |
---|
1326 | [27531] ahci_reset_port: issuing COMRESET on port 5 |
---|
1327 | [27533] Wait for communication... |
---|
1328 | [27562] ahci_reset_port: starting port 5 again |
---|
1329 | [27562] ahci_start_port 0.5 |
---|
1330 | [27562] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1331 | [27562] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1332 | [28125] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1333 | [28125] ATA command for 0.5.0, slot 0: |
---|
1334 | [28125] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1335 | [28125] ata_cmd: 1530:4b3a 00 00 04 00 34 8d a9 00-00 00 c8 43 ....4......C |
---|
1336 | [28125] sg_list: 0638:7d80 e8 17 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00 ................ |
---|
1337 | [28125] executing polled cmd on slot 0...[28500] ata_read_pp(): blocks transferred = 4 |
---|
1338 | [28500] |
---|
1339 | [28500] ahci_stop_port 0.5 |
---|
1340 | [28500] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1341 | [28500] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1342 | [28500] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1343 | [28500] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1344 | [28500] ahci_read(0.5.0, 186289220, 4) |
---|
1345 | [28500] ahci_reset_port: resetting port 0.5 |
---|
1346 | [28500] AHCI port 5 registers: |
---|
1347 | PORT_CMD = 0x242006 |
---|
1348 | command engine status: |
---|
1349 | PORT_SCR_ACT = 0x0 |
---|
1350 | PORT_CMD_ISSUE = 0x0 |
---|
1351 | link/device status: |
---|
1352 | PORT_SCR_STAT = 0x113 |
---|
1353 | PORT_SCR_CTL = 0x0 |
---|
1354 | PORT_SCR_ERR = 0x0 |
---|
1355 | PORT_TFDATA = 0x50 |
---|
1356 | interrupt status: |
---|
1357 | PORT_IRQ_STAT = 0x0 |
---|
1358 | PORT_IRQ_MASK = 0x0 |
---|
1359 | HOST_IRQ_STAT = 0x0 |
---|
1360 | [28500] ahci_stop_port 0.5 |
---|
1361 | [28500] ahci_reset_port: setting link speed and power management options |
---|
1362 | [28500] ahci_reset_port: issuing COMRESET on port 5 |
---|
1363 | [28501] Wait for communication... |
---|
1364 | [28531] ahci_reset_port: starting port 5 again |
---|
1365 | [28531] ahci_start_port 0.5 |
---|
1366 | [28531] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1367 | [28531] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1368 | [29062] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1369 | [29062] ATA command for 0.5.0, slot 0: |
---|
1370 | [29062] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ |
---|
1371 | [29062] ata_cmd: 1530:4b3a 00 00 04 00 44 8c 1a 00-00 00 c8 4b ....D......K |
---|
1372 | [29062] sg_list: 0638:7d80 74 0d 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00 t............... |
---|
1373 | [29062] executing polled cmd on slot 0...[29437] ata_read_pp(): blocks transferred = 4 |
---|
1374 | [29437] |
---|
1375 | [29437] ahci_stop_port 0.5 |
---|
1376 | [29437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
1377 | [29437] IORB 06c8:2914 removed (queue = 0610:5e92) |
---|
1378 | [29437] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) |
---|
1379 | [29437] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0610:5a4a [driver], timeout = 0) |
---|
1380 | [29437] leaving initialization mode |
---|
1381 | [29437] ahci_complete_init: completing initialization of adapter #0 |
---|
1382 | [29437] registering interrupt #16 |
---|
1383 | [29437] ahci_complete_init: resetting port 0 |
---|
1384 | [29437] ahci_reset_port: resetting port 0.0 |
---|
1385 | [29437] AHCI port 0 registers: |
---|
1386 | PORT_CMD = 0x4002006 |
---|
1387 | command engine status: |
---|
1388 | PORT_SCR_ACT = 0x0 |
---|
1389 | PORT_CMD_ISSUE = 0x0 |
---|
1390 | link/device status: |
---|
1391 | PORT_SCR_STAT = 0x123 |
---|
1392 | PORT_SCR_CTL = 0x0 |
---|
1393 | PORT_SCR_ERR = 0x0 |
---|
1394 | PORT_TFDATA = 0x150 |
---|
1395 | interrupt status: |
---|
1396 | PORT_IRQ_STAT = 0x0 |
---|
1397 | PORT_IRQ_MASK = 0x0 |
---|
1398 | HOST_IRQ_STAT = 0x0 |
---|
1399 | [29437] ahci_stop_port 0.0 |
---|
1400 | [29437] ahci_reset_port: setting link speed and power management options |
---|
1401 | [29437] ahci_reset_port: issuing COMRESET on port 0 |
---|
1402 | [29439] Wait for communication... |
---|
1403 | [29468] ahci_reset_port: starting port 0 again |
---|
1404 | [29468] ahci_start_port 0.0 |
---|
1405 | [29468] ahci_start_port: PORT_SCR_STAT = 0x123 |
---|
1406 | [29468] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1407 | [29500] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1408 | [29500] ahci_complete_init: resetting port 1 |
---|
1409 | [29500] ahci_reset_port: resetting port 0.1 |
---|
1410 | [29500] AHCI port 1 registers: |
---|
1411 | PORT_CMD = 0xc0006 |
---|
1412 | command engine status: |
---|
1413 | PORT_SCR_ACT = 0x0 |
---|
1414 | PORT_CMD_ISSUE = 0x0 |
---|
1415 | link/device status: |
---|
1416 | PORT_SCR_STAT = 0x113 |
---|
1417 | PORT_SCR_CTL = 0x0 |
---|
1418 | PORT_SCR_ERR = 0x0 |
---|
1419 | PORT_TFDATA = 0x50 |
---|
1420 | interrupt status: |
---|
1421 | PORT_IRQ_STAT = 0x0 |
---|
1422 | PORT_IRQ_MASK = 0x0 |
---|
1423 | HOST_IRQ_STAT = 0x0 |
---|
1424 | [29500] ahci_stop_port 0.1 |
---|
1425 | [29500] ahci_reset_port: setting link speed and power management options |
---|
1426 | [29500] ahci_reset_port: issuing COMRESET on port 1 |
---|
1427 | [29501] Wait for communication... |
---|
1428 | [29531] ahci_reset_port: starting port 1 again |
---|
1429 | [29531] ahci_start_port 0.1 |
---|
1430 | [29531] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1431 | [29531] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1432 | [29531] ahci_reset_port: PORT_TFDATA = 0x100 |
---|
1433 | [29531] ahci_complete_init: resetting port 5 |
---|
1434 | [29531] ahci_reset_port: resetting port 0.5 |
---|
1435 | [29531] AHCI port 5 registers: |
---|
1436 | PORT_CMD = 0x242006 |
---|
1437 | command engine status: |
---|
1438 | PORT_SCR_ACT = 0x0 |
---|
1439 | PORT_CMD_ISSUE = 0x0 |
---|
1440 | link/device status: |
---|
1441 | PORT_SCR_STAT = 0x113 |
---|
1442 | PORT_SCR_CTL = 0x0 |
---|
1443 | PORT_SCR_ERR = 0x0 |
---|
1444 | PORT_TFDATA = 0x50 |
---|
1445 | interrupt status: |
---|
1446 | PORT_IRQ_STAT = 0x0 |
---|
1447 | PORT_IRQ_MASK = 0x0 |
---|
1448 | HOST_IRQ_STAT = 0x0 |
---|
1449 | [29531] ahci_stop_port 0.5 |
---|
1450 | [29531] ahci_reset_port: setting link speed and power management options |
---|
1451 | [29531] ahci_reset_port: issuing COMRESET on port 5 |
---|
1452 | [29533] Wait for communication... |
---|
1453 | [29562] ahci_reset_port: starting port 5 again |
---|
1454 | [29562] ahci_start_port 0.5 |
---|
1455 | [29562] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
1456 | [29562] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1457 | [30093] ahci_reset_port: PORT_TFDATA = 0x150 |
---|
1458 | Adapter 0: PCI=0:31:2 ID=8086:3b2f Intel PCH AHCI irq=16 addr=0xf2427000 version=10300 |
---|
1459 | Port 0: |
---|
1460 | Drive 0: Drive present but n[130425] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1461 | [130425] ahci_read(0.5.0, 20493119, 8) |
---|
1462 | [130425] ATA command for 0.5.0, slot 19: |
---|
1463 | [130425] cmd_hdr: 0638:7a60 05 00 01 00 00 00 00 00-80 5f f1 00 00 00 00 00 ........._...... |
---|
1464 | [130425] ata_cmd: 1530:562a 00 00 08 00 3f b3 38 00-00 00 c8 41 ....?.8....A |
---|
1465 | [130425] sg_list: 0638:c000 00 10 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1466 | [130425] issuing command on slot 19 |
---|
1467 | [130787] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1468 | [130787] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00080000 |
---|
1469 | [130787] ata_read_pp(): blocks transferred = 8 |
---|
1470 | [130787] IORB 06f8:7e1f removed (queue = 0610:5e92) |
---|
1471 | [130787] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) |
---|
1472 | [130787] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1473 | [130787] ahci_read(0.5.0, 23688319, 8) |
---|
1474 | [130787] ATA command for 0.5.0, slot 20: |
---|
1475 | [130787] cmd_hdr: 0638:7a80 05 00 01 00 00 00 00 00-00 63 f1 00 00 00 00 00 .........c...... |
---|
1476 | [130787] ata_cmd: 1530:5432 00 00 08 00 7f 74 69 00-00 00 c8 41 ....ti....A |
---|
1477 | [130787] sg_list: 0638:c380 00 20 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 . .............. |
---|
1478 | [130787] issuing command on slot 20 |
---|
1479 | [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1480 | [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00100000 |
---|
1481 | [130798] ata_read_pp(): blocks transferred = 8 |
---|
1482 | [130798] IORB 06f8:7e1f removed (queue = 0610:5e92) |
---|
1483 | [130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) |
---|
1484 | [130798] IORB 06f8:7e1f queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0) |
---|
1485 | [130798] ahci_write(0.5.0, 61409927, 8) |
---|
1486 | [130798] ATA command for 0.5.0, slot 21: |
---|
1487 | [130798] cmd_hdr: 0638:7aa0 45 00 01 00 00 00 00 00-80 66 f1 00 00 00 00 00 E........f...... |
---|
1488 | [130798] ata_cmd: 1530:54a4 00 00 08 00 87 0a a9 00-00 00 ca 43 ...........C |
---|
1489 | [130798] sg_list: 0638:c700 00 b0 cb bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1490 | [130798] issuing command on slot 21 |
---|
1491 | [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1492 | [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00200000 |
---|
1493 | [130798] ata_write_pp(): blocks transferred = 8 |
---|
1494 | [130798] IORB 06f8:7e1f removed (queue = 0610:5e92) |
---|
1495 | [130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) |
---|
1496 | [130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1497 | [130798] ahci_read(0.5.0, 20488207, 8) |
---|
1498 | [130798] ATA command for 0.5.0, slot 22: |
---|
1499 | [130798] cmd_hdr: 0638:7ac0 05 00 01 00 00 00 00 00-00 6a f1 00 00 00 00 00 .........j...... |
---|
1500 | [130798] ata_cmd: 15e8:fd96 00 00 08 00 0f a0 38 00-00 00 c8 41 ......8....A |
---|
1501 | [130798] sg_list: 0638:ca80 00 30 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .0.............. |
---|
1502 | [130798] issuing command on slot 22 |
---|
1503 | [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1504 | [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00400000 |
---|
1505 | [130798] ata_read_pp(): blocks transferred = 8 |
---|
1506 | [130798] IORB 06f8:7d0e removed (queue = 0610:5e92) |
---|
1507 | [130798] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) |
---|
1508 | [130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1509 | [130798] ahci_read(0.5.0, 20487815, 8) |
---|
1510 | [130798] ATA command for 0.5.0, slot 23: |
---|
1511 | [130798] cmd_hdr: 0638:7ae0 05 00 01 00 00 00 00 00-80 6d f1 00 00 00 00 00 .........m...... |
---|
1512 | [130798] ata_cmd: 1530:56fe 00 00 08 00 87 9e 38 00-00 00 c8 41 ......8....A |
---|
1513 | [130798] sg_list: 0638:ce00 00 40 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .@.............. |
---|
1514 | [130798] issuing command on slot 23 |
---|
1515 | [130800] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1516 | [130800] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00800000 |
---|
1517 | [130800] ata_read_pp(): blocks transferred = 8 |
---|
1518 | [130800] IORB 06f8:7d0e removed (queue = 0610:5e92) |
---|
1519 | [130800] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) |
---|
1520 | [130800] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) |
---|
1521 | [130800] ahci_read(0.5.0, 20488719, 8) |
---|
1522 | [130800] ATA command for 0.5.0, slot 24: |
---|
1523 | [130800] cmd_hdr: 0638:7b00 05 00 01 00 00 00 00 00-00 71 f1 00 00 00 00 00 .........q...... |
---|
1524 | [130800] ata_cmd: 1530:56de 00 00 08 00 0f a2 38 00-00 00 c8 41 ......8....A |
---|
1525 | [130800] sg_list: 0638:d180 00 50 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .P.............. |
---|
1526 | [130800] issuing command on slot 24 |
---|
1527 | [130832] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e |
---|
1528 | [130832] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x01000000 |
---|
1529 | [130832] ata_read_pp(): blocks transferred = 8 |
---|
1530 | [130832] IORB 06f8:7d0e removed (queue = 0610:5e92) |
---|
1531 | [130832] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) |
---|
1532 | [130832] IORB 06f8:7d0e queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0) |
---|
1533 | [130832] ahci_write(0.5.0, 27831087, 64) |
---|
1534 | [130832] ATA command for 0.5.0, slot 25: |
---|
1535 | [130832] cmd_hdr: 0638:7b20 45 00 08 00 00 00 00 00-80 74 f1 00 00 00 00 00 E........t...... |
---|
1536 | [130832] ata_cmd: 1530:58c8 00 00 40 00 2f ab a8 00-00 00 ca 41 ..@./......A |
---|
1537 | [130832] sg_list: 0638:d500 00 e0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1538 | 0638:d510 00 f0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1539 | 0638:d520 00 00 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1540 | 0638:d530 00 10 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ |
---|
1541 | 0638:d540 00 20 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 . .............. |
---|
1542 | 0638:d550 00 30 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .0.............. |
---|
1543 | 0638:d560 00 40 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .@.............. |
---|
1544 | 0638:d570 00 50 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .P.............. |
---|
1545 | [130832] issuing command on slot 25 |
---|