BldLevel: @#D Azarewicz:1.31#@##1## 5 Sep 2013 08:31:44 DAZAR1 ::::::Test Build@@AHCI Driver (c) 2013 D Azarewicz CmdLine: OS2AHCI.ADD /d:2 [2031] WARNING: This test version of OS2AHCI will stop working in 29 days [2031] scanning PCI bus... [2953] Adapter 0 PCI=0:31:2 ID=8086:3b2f [2953] BAR #0: type = I/O, addr = 0x00001818, size = 8 [2953] BAR #1: type = I/O, addr = 0x0000180c, size = 4 [2953] BAR #2: type = I/O, addr = 0x00001810, size = 8 [2953] BAR #3: type = I/O, addr = 0x00001808, size = 4 [2953] BAR #4: type = I/O, addr = 0x00001840, size = 32 [2955] BAR #5: type = MEM, addr = 0xf2427000, size = 2048 [5054] Registered kernel exit routine for INT13 mode [5076] IORB 0668:8f42 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0) [5076] ahci_save_bios_config: BIOS AHCI mode is 0 [5076] AHCI global registers for adapter 0 0:31:2 irq=16 addr=0xf2427000 00: ff20ff65 - 64bit ncq sntf mps sss alpm led clo pio_multi ssc part ems sxs cmd_slots:32 ports:6 04: 80000000 - ahci_enabled 08: 00000000 0c: 00000033 10: 00010300 14: 00000000 18: 00000000 1c: 01600002 20: 07010000 24: 00000004 - apst [5076] ahci_scan_ports: scanning ports on adapter 0 [5076] ahci_scan_ports: Wait till not busy on port 0 [5076] ahci_reset_port: resetting port 0.0 [5076] AHCI port 0 registers: PORT_CMD = 0x4002006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x621 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x50000 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x400000 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5076] ahci_stop_port 0.0 [5076] ahci_reset_port: setting link speed and power management options [5076] ahci_reset_port: issuing COMRESET on port 0 [5078] Wait for communication... [5093] ahci_reset_port: starting port 0 again [5093] ahci_start_port 0.0 [5093] ahci_start_port: PORT_SCR_STAT = 0x123 [5093] ahci_start_port: PORT_SCR_ERR = 0x0 [5125] ahci_reset_port: PORT_TFDATA = 0x150 [5125] ahci_scan_ports: port 0 seems to be attached to a device; probing... [5125] ATA command for 0.0.0, slot 0: [5125] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ [5125] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ [5125] sg_list: 0628:0580 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... [5125] executing polled cmd...[5156] success [5156] ATA_IDENTIFY results: 0610:2f2a 5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 Z..?7.......?... 0610:2f3a 00 00 00 00 30 31 38 30-35 31 43 50 43 4b 34 30 ....018051CPCK40 0610:2f4a 50 42 32 47 57 48 4a 33-03 00 5f 76 04 00 43 50 PB2GWHJ3.._v..CP 0610:2f5a 5a 33 37 43 46 30 49 48-41 54 48 43 20 49 54 48 Z37CF0IHATHC ITH 0610:2f6a 37 53 35 32 33 30 41 32-41 39 36 33 20 34 20 20 7S5230A2A963 4 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 .. 0610:2f8a 00 40 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00 .@...@.......?.. 0610:2f9a 3f 00 10 fc fb 00 10 01-ff ff ff 0f 00 00 07 00 ?............... 0610:2faa 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... 0610:2fba 00 00 00 00 00 00 1f 00-06 1f 04 00 4c 00 40 00 ............L.@. 0610:2fca fc 01 28 00 6b 34 09 7d-23 61 69 34 09 bc 23 61 ..(.k4.}#ai4..#a 0610:2fda 3f 20 2c 00 2c 00 80 40-fe ff 00 00 00 00 00 00 ? ,.,..@........ 0610:2fea 00 00 00 00 00 00 00 00-b0 ea 42 25 00 00 00 00 ..........B%.... 0610:2ffa 00 00 00 00 00 40 b8 7a-00 50 a6 cc c1 45 55 24 .....@.z.P...EU$ 0610:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 1c 40 ...............@ 0610:301a 1c 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .@.............. 0610:302a 29 00 0b 00 00 00 00 00-00 00 00 00 00 00 00 00 )............... 0610:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:304a 00 00 00 00 00 00 00 00-05 40 00 40 00 80 00 00 .........@.@.... 0610:305a 5a 33 00 00 00 00 b1 b1-b1 47 00 00 00 00 00 00 Z3.......G...... 0610:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:307a 03 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30aa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30ba 00 00 00 00 00 00 00 00-00 00 00 00 3d 00 00 00 ............=... 0610:30ca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30da 00 00 20 1c 00 00 00 00-00 00 00 00 1f 10 21 00 .. ...........!. 0610:30ea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30fa 00 00 00 00 01 00 c7 02-00 00 00 00 00 00 00 00 ................ 0610:310a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:311a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 13 ................ [5156] found device 0.0.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 [5156] ahci_stop_port 0.0 [5156] ahci_scan_ports: Wait till not busy on port 1 [5156] ahci_reset_port: resetting port 0.1 [5156] AHCI port 1 registers: PORT_CMD = 0xc0006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5156] ahci_stop_port 0.1 [5156] ahci_reset_port: setting link speed and power management options [5156] ahci_reset_port: issuing COMRESET on port 1 [5158] Wait for communication... [5187] ahci_reset_port: starting port 1 again [5187] ahci_start_port 0.1 [5187] ahci_start_port: PORT_SCR_STAT = 0x113 [5187] ahci_start_port: PORT_SCR_ERR = 0x0 [5187] ahci_reset_port: PORT_TFDATA = 0x100 [5187] ahci_scan_ports: port 1 seems to be attached to a device; probing... [5187] ATA command for 0.1.0, slot 0: [5187] cmd_hdr: 0628:7800 05 00 01 00 00 00 00 00-00 3d ef 00 00 00 00 00 .........=...... [5187] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............ [5187] sg_list: 0628:7d80 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... [5187] executing polled cmd...[5218] success [5218] ATA_IDENTIFY_PACKET results: 0610:2f2a c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f3a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f4a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 2e 31 ...............1 0610:2f5a 41 46 20 20 20 20 70 4f-69 74 72 61 20 63 56 44 AF pOitra cVD 0610:2f6a 20 44 57 52 41 20 2d 44-37 37 30 30 20 48 20 20 DWRA -D7700 H 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 .. 0610:2f8a 00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00 .....@.......... 0610:2f9a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00 ................ 0610:2faa 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... 0610:2fba 00 00 00 00 00 00 00 00-02 06 00 00 68 00 40 00 ............h.@. 0610:2fca f8 01 00 00 18 42 00 40-00 40 18 42 00 00 00 40 .....B.@.@.B...@ 0610:2fda 3f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ? .............. 0610:2fea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ffa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:300a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:301a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:302a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:303a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:304a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:305a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:306a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:307a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:308a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:309a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30aa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30ba 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30ca 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30da 00 00 00 00 00 00 00 00-00 00 00 00 1f 10 00 00 ................ 0610:30ea 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:30fa 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:310a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:311a 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 21 ...............! [5218] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1 [5218] ahci_stop_port 0.1 [5218] ahci_scan_ports: Wait till not busy on port 4 [5218] ahci_reset_port: resetting port 0.4 [5218] AHCI port 4 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x0 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x7f interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5218] ahci_stop_port 0.4 [5218] ahci_reset_port: setting link speed and power management options [5218] ahci_reset_port: issuing COMRESET on port 4 [5220] Wait for communication... [5750] no device present after resetting port #4 (PORT_SCR_STAT = 0x0) [5750] ahci_stop_port 0.4 [5750] ahci_scan_ports: Wait till not busy on port 5 [5750] ahci_reset_port: resetting port 0.5 [5750] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x150 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5750] ahci_stop_port 0.5 [5750] ahci_reset_port: setting link speed and power management options [5750] ahci_reset_port: issuing COMRESET on port 5 [5751] Wait for communication... [5781] ahci_reset_port: starting port 5 again [5781] ahci_start_port 0.5 [5781] ahci_start_port: PORT_SCR_STAT = 0x113 [5781] ahci_start_port: PORT_SCR_ERR = 0x0 [5843] ahci_reset_port: PORT_TFDATA = 0x150 [5843] ahci_scan_ports: port 5 seems to be attached to a device; probing... [5843] ATA command for 0.5.0, slot 0: [5843] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [5843] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ [5843] sg_list: 0638:7d80 2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 *............... [5843] executing polled cmd...[5875] success [5875] ATA_IDENTIFY results: 0610:2f2a 5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 Z..?7.......?... 0610:2f3a 00 00 00 00 20 20 20 20-20 20 50 4d 5a 32 41 58 .... PMZ2AX 0610:2f4a 4c 58 33 48 53 50 53 50-03 00 e4 3a 04 00 42 4d LX3HSPSP...:..BM 0610:2f5a 49 5a 36 43 52 30 54 48-35 53 31 34 31 30 47 30 IZ6CR0TH5S1410G0 0610:2f6a 53 39 30 41 20 30 20 20-20 20 20 20 20 20 20 20 S90A 0 0610:2f7a 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 .. 0610:2f8a 00 00 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00 .....@.......?.. 0610:2f9a 3f 00 10 fc fb 00 00 01-30 22 a5 0b 00 00 07 04 ?.......0"...... 0610:2faa 03 00 78 00 78 00 f0 00-78 00 00 00 00 00 00 00 ..x.x...x....... 0610:2fba 00 00 00 00 00 00 00 00-02 02 00 00 48 00 40 00 ............H.@. 0610:2fca fc 00 1a 00 6b 74 09 7f-63 60 69 f4 09 3c 63 60 ....kt.c`i........@ [6750] sg_list: 0638:7d80 aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [6750] executing polled cmd...[7125] success [7125] DLA sector 62: 0610:2faa 02 52 4d 42 50 4d 46 44-21 5f 54 ce 01 ed 5e df .RMBPMFD!_T...^. 0610:2fba 01 ed 5e df 00 00 00 00-79 32 00 00 f0 00 00 00 ..^.....y2...... 0610:2fca 3f 00 00 00 44 69 73 6b-31 20 2d 20 39 35 33 39 ?...Disk1 - 9539 0610:2fda 33 2e 33 20 4d 69 42 00-00 00 00 00 3.3 MiB..... [7125] is_lvm_geometry found at sector 62 [7125] Reported geometry: 12921 cylinders, 240 heads, 63 sectors per track (95393MB) (LVM) [7125] [7125] ahci_stop_port 0.5 [7125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [7125] IORB 06c8:c56c removed (queue = 0610:5e92) [7125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [7125] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [7125] ahci_read(0.5.0, 0, 1) [7125] ahci_reset_port: resetting port 0.5 [7125] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [7125] ahci_stop_port 0.5 [7125] ahci_reset_port: setting link speed and power management options [7125] ahci_reset_port: issuing COMRESET on port 5 [7126] Wait for communication... [7156] ahci_reset_port: starting port 5 again [7156] ahci_start_port 0.5 [7156] ahci_start_port: PORT_SCR_STAT = 0x113 [7156] ahci_start_port: PORT_SCR_ERR = 0x0 [7718] ahci_reset_port: PORT_TFDATA = 0x150 [7718] ATA command for 0.5.0, slot 0: [7718] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [7718] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ [7718] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [7718] executing polled cmd on slot 0...[8093] ata_read_pp(): blocks transferred = 1 [8093] [8093] ahci_stop_port 0.5 [8093] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [8093] IORB 06c8:c56c removed (queue = 0610:5e92) [8093] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [8093] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [8093] ahci_read(0.5.0, 62, 1) [8093] ahci_reset_port: resetting port 0.5 [8093] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x52 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [8093] ahci_stop_port 0.5 [8093] ahci_reset_port: setting link speed and power management options [8093] ahci_reset_port: issuing COMRESET on port 5 [8095] Wait for communication... [8125] ahci_reset_port: starting port 5 again [8125] ahci_start_port 0.5 [8125] ahci_start_port: PORT_SCR_STAT = 0x113 [8125] ahci_start_port: PORT_SCR_ERR = 0x0 [8656] ahci_reset_port: PORT_TFDATA = 0x150 [8656] ATA command for 0.5.0, slot 0: [8656] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [8656] ata_cmd: 1530:47f2 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ [8656] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [8656] executing polled cmd on slot 0...[9031] ata_read_pp(): blocks transferred = 1 [9031] [9031] ahci_stop_port 0.5 [9031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [9031] IORB 06c8:c56c removed (queue = 0610:5e92) [9031] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [9031] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0) [9031] ahci_read(0.0.0, 31, 1) [9031] ahci_reset_port: resetting port 0.0 [9031] AHCI port 0 registers: PORT_CMD = 0x4002006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x123 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x150 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [9031] ahci_stop_port 0.0 [9031] ahci_reset_port: setting link speed and power management options [9031] ahci_reset_port: issuing COMRESET on port 0 [9033] Wait for communication... [9062] ahci_reset_port: starting port 0 again [9062] ahci_start_port 0.0 [9062] ahci_start_port: PORT_SCR_STAT = 0x123 [9062] ahci_start_port: PORT_SCR_ERR = 0x0 [9093] ahci_reset_port: PORT_TFDATA = 0x150 [9093] ATA command for 0.0.0, slot 0: [9093] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ [9093] ata_cmd: 1530:4c26 00 00 01 00 1f 00 00 00-00 00 c8 40 ...........@ [9093] sg_list: 0628:0580 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [9093] executing polled cmd on slot 0...[9406] polled cmd error for IORB 06c8:c56c[9406] ahci_reset_port: resetting port 0.0 [9406] AHCI port 0 registers: PORT_CMD = 0x400e017 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x221 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x10000 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x400001 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [9406] ahci_stop_port 0.0 [9406] ahci_reset_port: setting link speed and power management options [9406] ahci_reset_port: issuing COMRESET on port 0 [9408] Wait for communication... [9437] ahci_reset_port: starting port 0 again [9437] ahci_start_port 0.0 [9437] ahci_start_port: PORT_SCR_STAT = 0x123 [9437] ahci_start_port: PORT_SCR_ERR = 0x0 [9468] ahci_reset_port: PORT_TFDATA = 0x150 [9468] [9468] ahci_stop_port 0.0 [9468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [9468] IORB 06c8:c56c removed (queue = 0610:5b68) [9468] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) [9468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0) [9468] ahci_read(0.0.0, 0, 1) [9468] ahci_reset_port: resetting port 0.0 [9468] AHCI port 0 registers: PORT_CMD = 0x4002006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x123 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x150 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [9468] ahci_stop_port 0.0 [9468] ahci_reset_port: setting link speed and power management options [9468] ahci_reset_port: issuing COMRESET on port 0 [9470] Wait for communication... [9500] ahci_reset_port: starting port 0 again [9500] ahci_start_port 0.0 [9500] ahci_start_port: PORT_SCR_STAT = 0x123 [9500] ahci_start_port: PORT_SCR_ERR = 0x0 [9531] ahci_reset_port: PORT_TFDATA = 0x150 [9531] ATA command for 0.0.0, slot 0: [9531] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00 ................ [9531] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ [9531] sg_list: 0628:0580 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [9531] executing polled cmd on slot 0...[9562] polled cmd error for IORB 06c8:c56c[9562] ahci_reset_port: resetting port 0.0 [9562] AHCI port 0 registers: PORT_CMD = 0x400e017 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x221 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x10000 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x400001 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [9562] ahci_stop_port 0.0 [9562] ahci_reset_port: setting link speed and power management options [9562] ahci_reset_port: issuing COMRESET on port 0 [9564] Wait for communication... [9593] ahci_reset_port: starting port 0 again [9593] ahci_start_port 0.0 [9593] ahci_start_port: PORT_SCR_STAT = 0x123 [9593] ahci_start_port: PORT_SCR_ERR = 0x0 [9625] ahci_reset_port: PORT_TFDATA = 0x150 [9625] [9625] ahci_stop_port 0.0 [9625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [9625] IORB 06c8:c56c removed (queue = 0610:5b68) [9625] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608) [9625] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [9625] ahci_read(0.5.0, 62, 1) [9625] ahci_reset_port: resetting port 0.5 [9625] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [9625] ahci_stop_port 0.5 [9625] ahci_reset_port: setting link speed and power management options [9625] ahci_reset_port: issuing COMRESET on port 5 [9626] Wait for communication... [9656] ahci_reset_port: starting port 5 again [9656] ahci_start_port 0.5 [9656] ahci_start_port: PORT_SCR_STAT = 0x113 [9656] ahci_start_port: PORT_SCR_ERR = 0x0 [10156] ahci_reset_port: PORT_TFDATA = 0x150 [10156] ATA command for 0.5.0, slot 0: [10156] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [10156] ata_cmd: 1530:4c26 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ [10156] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [10156] executing polled cmd on slot 0...[10531] ata_read_pp(): blocks transferred = 1 [10531] [10531] ahci_stop_port 0.5 [10531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [10531] IORB 06c8:c56c removed (queue = 0610:5e92) [10531] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [10531] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [10531] ahci_read(0.5.0, 0, 1) [10531] ahci_reset_port: resetting port 0.5 [10531] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [10531] ahci_stop_port 0.5 [10531] ahci_reset_port: setting link speed and power management options [10531] ahci_reset_port: issuing COMRESET on port 5 [10533] Wait for communication... [10562] ahci_reset_port: starting port 5 again [10562] ahci_start_port 0.5 [10562] ahci_start_port: PORT_SCR_STAT = 0x113 [10562] ahci_start_port: PORT_SCR_ERR = 0x0 [11093] ahci_reset_port: PORT_TFDATA = 0x150 [11093] ATA command for 0.5.0, slot 0: [11093] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [11093] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ [11093] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [11093] executing polled cmd on slot 0...[11468] ata_read_pp(): blocks transferred = 1 [11468] [11468] ahci_stop_port 0.5 [11468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [11468] IORB 06c8:c56c removed (queue = 0610:5e92) [11468] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [11468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [11468] ahci_read(0.5.0, 63, 1) [11468] ahci_reset_port: resetting port 0.5 [11468] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x52 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [11468] ahci_stop_port 0.5 [11468] ahci_reset_port: setting link speed and power management options [11468] ahci_reset_port: issuing COMRESET on port 5 [11470] Wait for communication... [11500] ahci_reset_port: starting port 5 again [11500] ahci_start_port 0.5 [11500] ahci_start_port: PORT_SCR_STAT = 0x113 [11500] ahci_start_port: PORT_SCR_ERR = 0x0 [12031] ahci_reset_port: PORT_TFDATA = 0x150 [12031] ATA command for 0.5.0, slot 0: [12031] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [12031] ata_cmd: 1530:4c24 00 00 01 00 3f 00 00 00-00 00 c8 40 ....?......@ [12031] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [12031] executing polled cmd on slot 0...[12406] ata_read_pp(): blocks transferred = 1 [12406] [12406] ahci_stop_port 0.5 [12406] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [12406] IORB 06c8:c56c removed (queue = 0610:5e92) [12406] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [12406] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [12406] ahci_read(0.5.0, 20487662, 1) [12406] ahci_reset_port: resetting port 0.5 [12406] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [12406] ahci_stop_port 0.5 [12406] ahci_reset_port: setting link speed and power management options [12406] ahci_reset_port: issuing COMRESET on port 5 [12408] Wait for communication... [12437] ahci_reset_port: starting port 5 again [12437] ahci_start_port 0.5 [12437] ahci_start_port: PORT_SCR_STAT = 0x113 [12437] ahci_start_port: PORT_SCR_ERR = 0x0 [12968] ahci_reset_port: PORT_TFDATA = 0x150 [12968] ATA command for 0.5.0, slot 0: [12968] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [12968] ata_cmd: 1530:4c04 00 00 01 00 ee 9d 38 00-00 00 c8 41 ......8....A [12968] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [12968] executing polled cmd on slot 0...[13343] ata_read_pp(): blocks transferred = 1 [13343] [13343] ahci_stop_port 0.5 [13343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [13343] IORB 06c8:c56c removed (queue = 0610:5e92) [13343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [13343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [13343] ahci_read(0.5.0, 20487600, 1) [13343] ahci_reset_port: resetting port 0.5 [13343] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [13343] ahci_stop_port 0.5 [13343] ahci_reset_port: setting link speed and power management options [13343] ahci_reset_port: issuing COMRESET on port 5 [13345] Wait for communication... [13375] ahci_reset_port: starting port 5 again [13375] ahci_start_port 0.5 [13375] ahci_start_port: PORT_SCR_STAT = 0x113 [13375] ahci_start_port: PORT_SCR_ERR = 0x0 [13968] ahci_reset_port: PORT_TFDATA = 0x150 [13968] ATA command for 0.5.0, slot 0: [13968] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [13968] ata_cmd: 1530:4c0a 00 00 01 00 b0 9d 38 00-00 00 c8 41 ......8....A [13968] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [13968] executing polled cmd on slot 0...[14343] ata_read_pp(): blocks transferred = 1 [14343] [14343] ahci_stop_port 0.5 [14343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [14343] IORB 06c8:c56c removed (queue = 0610:5e92) [14343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [14343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [14343] ahci_read(0.5.0, 20487663, 1) [14343] ahci_reset_port: resetting port 0.5 [14343] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [14343] ahci_stop_port 0.5 [14343] ahci_reset_port: setting link speed and power management options [14343] ahci_reset_port: issuing COMRESET on port 5 [14345] Wait for communication... [14375] ahci_reset_port: starting port 5 again [14375] ahci_start_port 0.5 [14375] ahci_start_port: PORT_SCR_STAT = 0x113 [14375] ahci_start_port: PORT_SCR_ERR = 0x0 [14937] ahci_reset_port: PORT_TFDATA = 0x150 [14937] ATA command for 0.5.0, slot 0: [14937] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [14937] ata_cmd: 1530:4c02 00 00 01 00 ef 9d 38 00-00 00 c8 41 ......8....A [14937] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [14937] executing polled cmd on slot 0...[15312] ata_read_pp(): blocks transferred = 1 [15312] [15312] ahci_stop_port 0.5 [15312] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [15312] IORB 06c8:c56c removed (queue = 0610:5e92) [15312] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [15312] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [15312] ahci_read(0.5.0, 61447742, 1) [15312] ahci_reset_port: resetting port 0.5 [15312] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [15312] ahci_stop_port 0.5 [15312] ahci_reset_port: setting link speed and power management options [15312] ahci_reset_port: issuing COMRESET on port 5 [15314] Wait for communication... [15343] ahci_reset_port: starting port 5 again [15343] ahci_start_port 0.5 [15343] ahci_start_port: PORT_SCR_STAT = 0x113 [15343] ahci_start_port: PORT_SCR_ERR = 0x0 [15875] ahci_reset_port: PORT_TFDATA = 0x150 [15875] ATA command for 0.5.0, slot 0: [15875] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [15875] ata_cmd: 1530:4c04 00 00 01 00 3e 9e a9 00-00 00 c8 43 ....>......C [15875] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [15875] executing polled cmd on slot 0...[16250] ata_read_pp(): blocks transferred = 1 [16250] [16250] ahci_stop_port 0.5 [16250] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [16250] IORB 06c8:c56c removed (queue = 0610:5e92) [16250] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [16250] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [16250] ahci_read(0.5.0, 61447680, 1) [16250] ahci_reset_port: resetting port 0.5 [16250] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [16250] ahci_stop_port 0.5 [16250] ahci_reset_port: setting link speed and power management options [16250] ahci_reset_port: issuing COMRESET on port 5 [16251] Wait for communication... [16281] ahci_reset_port: starting port 5 again [16281] ahci_start_port 0.5 [16281] ahci_start_port: PORT_SCR_STAT = 0x113 [16281] ahci_start_port: PORT_SCR_ERR = 0x0 [16812] ahci_reset_port: PORT_TFDATA = 0x150 [16812] ATA command for 0.5.0, slot 0: [16812] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [16812] ata_cmd: 1530:4c0a 00 00 01 00 00 9e a9 00-00 00 c8 43 ...........C [16812] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [16812] executing polled cmd on slot 0...[17187] ata_read_pp(): blocks transferred = 1 [17187] [17187] ahci_stop_port 0.5 [17187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [17187] IORB 06c8:c56c removed (queue = 0610:5e92) [17187] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [17187] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [17187] ahci_read(0.5.0, 61447743, 1) [17187] ahci_reset_port: resetting port 0.5 [17187] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [17187] ahci_stop_port 0.5 [17187] ahci_reset_port: setting link speed and power management options [17187] ahci_reset_port: issuing COMRESET on port 5 [17189] Wait for communication... [17218] ahci_reset_port: starting port 5 again [17218] ahci_start_port 0.5 [17218] ahci_start_port: PORT_SCR_STAT = 0x113 [17218] ahci_start_port: PORT_SCR_ERR = 0x0 [17750] ahci_reset_port: PORT_TFDATA = 0x150 [17750] ATA command for 0.5.0, slot 0: [17750] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [17750] ata_cmd: 1530:4c02 00 00 01 00 3f 9e a9 00-00 00 c8 43 ....?......C [17750] sg_list: 0638:7d80 10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [17750] executing polled cmd on slot 0...[18125] ata_read_pp(): blocks transferred = 1 [18125] [18125] ahci_stop_port 0.5 [18125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [18125] IORB 06c8:c56c removed (queue = 0610:5e92) [18125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000) [18130] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [18130] ahci_read(0.5.0, 61447679, 1) [18130] ahci_reset_port: resetting port 0.5 [18130] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [18130] ahci_stop_port 0.5 [18130] ahci_reset_port: setting link speed and power management options [18130] ahci_reset_port: issuing COMRESET on port 5 [18132] Wait for communication... [18156] ahci_reset_port: starting port 5 again [18156] ahci_start_port 0.5 [18156] ahci_start_port: PORT_SCR_STAT = 0x113 [18156] ahci_start_port: PORT_SCR_ERR = 0x0 [18687] ahci_reset_port: PORT_TFDATA = 0x150 [18687] ATA command for 0.5.0, slot 0: [18687] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [18687] ata_cmd: 1530:4b02 00 00 01 00 ff 9d a9 00-00 00 c8 43 ...........C [18687] sg_list: 0638:7d80 28 42 88 bc 00 00 00 00-00 00 00 00 ff 01 00 00 (B.............. [18687] executing polled cmd on slot 0...[19062] ata_read_pp(): blocks transferred = 1 [19062] [19062] ahci_stop_port 0.5 [19062] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [19062] IORB 06c8:2914 removed (queue = 0610:5e92) [19062] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [19062] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [19062] ahci_read(0.5.0, 186293519, 1) [19062] ahci_reset_port: resetting port 0.5 [19062] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [19062] ahci_stop_port 0.5 [19062] ahci_reset_port: setting link speed and power management options [19062] ahci_reset_port: issuing COMRESET on port 5 [19064] Wait for communication... [19093] ahci_reset_port: starting port 5 again [19093] ahci_start_port 0.5 [19093] ahci_start_port: PORT_SCR_STAT = 0x113 [19093] ahci_start_port: PORT_SCR_ERR = 0x0 [19625] ahci_reset_port: PORT_TFDATA = 0x150 [19625] ATA command for 0.5.0, slot 0: [19625] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [19625] ata_cmd: 1530:4b02 00 00 01 00 0f 9d 1a 00-00 00 c8 4b ...........K [19625] sg_list: 0638:7d80 c4 4d 91 bc 00 00 00 00-00 00 00 00 ff 01 00 00 .M.............. [19625] executing polled cmd on slot 0...[20000] ata_read_pp(): blocks transferred = 1 [20000] [20000] ahci_stop_port 0.5 [20000] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [20000] IORB 06c8:2914 removed (queue = 0610:5e92) [20000] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [20000] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [20000] ahci_read(0.5.0, 61443452, 1) [20000] ahci_reset_port: resetting port 0.5 [20000] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [20000] ahci_stop_port 0.5 [20001] ahci_reset_port: setting link speed and power management options [20001] ahci_reset_port: issuing COMRESET on port 5 [20003] Wait for communication... [20031] ahci_reset_port: starting port 5 again [20031] ahci_start_port 0.5 [20031] ahci_start_port: PORT_SCR_STAT = 0x113 [20031] ahci_start_port: PORT_SCR_ERR = 0x0 [20562] ahci_reset_port: PORT_TFDATA = 0x150 [20562] ATA command for 0.5.0, slot 0: [20562] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [20562] ata_cmd: 1530:4ad2 00 00 01 00 7c 8d a9 00-00 00 c8 43 ....|......C [20562] sg_list: 0638:7d80 d0 ad 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [20562] executing polled cmd on slot 0...[20937] ata_read_pp(): blocks transferred = 1 [20937] [20937] ahci_stop_port 0.5 [20937] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [20937] IORB 06c8:2914 removed (queue = 0610:5e92) [20937] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [20937] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [20937] ahci_read(0.5.0, 61443452, 68) [20937] ahci_reset_port: resetting port 0.5 [20937] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [20937] ahci_stop_port 0.5 [20937] ahci_reset_port: setting link speed and power management options [20937] ahci_reset_port: issuing COMRESET on port 5 [20939] Wait for communication... [20968] ahci_reset_port: starting port 5 again [20968] ahci_start_port 0.5 [20968] ahci_start_port: PORT_SCR_STAT = 0x113 [20968] ahci_start_port: PORT_SCR_ERR = 0x0 [21500] ahci_reset_port: PORT_TFDATA = 0x150 [21500] ATA command for 0.5.0, slot 0: [21500] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [21500] ata_cmd: 1530:4ad2 00 00 44 00 7c 8d a9 00-00 00 c8 43 ..D.|......C [21500] sg_list: 0638:7d80 24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... [21500] executing polled cmd on slot 0...[21875] ata_read_pp(): blocks transferred = 68 [21875] [21875] ahci_stop_port 0.5 [21875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [21875] IORB 06c8:2914 removed (queue = 0610:5e92) [21875] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [21875] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [21875] ahci_read(0.5.0, 61443384, 1) [21875] ahci_reset_port: resetting port 0.5 [21875] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [21875] ahci_stop_port 0.5 [21875] ahci_reset_port: setting link speed and power management options [21875] ahci_reset_port: issuing COMRESET on port 5 [21876] Wait for communication... [21906] ahci_reset_port: starting port 5 again [21906] ahci_start_port 0.5 [21906] ahci_start_port: PORT_SCR_STAT = 0x113 [21906] ahci_start_port: PORT_SCR_ERR = 0x0 [22437] ahci_reset_port: PORT_TFDATA = 0x150 [22437] ATA command for 0.5.0, slot 0: [22437] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [22437] ata_cmd: 1530:4ad2 00 00 01 00 38 8d a9 00-00 00 c8 43 ....8......C [22437] sg_list: 0638:7d80 24 1e 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 $............... [22437] executing polled cmd on slot 0...[22812] ata_read_pp(): blocks transferred = 1 [22812] [22812] ahci_stop_port 0.5 [22812] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [22812] IORB 06c8:2914 removed (queue = 0610:5e92) [22812] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [22812] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [22812] ahci_read(0.5.0, 61443384, 68) [22812] ahci_reset_port: resetting port 0.5 [22812] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [22812] ahci_stop_port 0.5 [22812] ahci_reset_port: setting link speed and power management options [22812] ahci_reset_port: issuing COMRESET on port 5 [22814] Wait for communication... [22843] ahci_reset_port: starting port 5 again [22843] ahci_start_port 0.5 [22843] ahci_start_port: PORT_SCR_STAT = 0x113 [22843] ahci_start_port: PORT_SCR_ERR = 0x0 [23375] ahci_reset_port: PORT_TFDATA = 0x150 [23375] ATA command for 0.5.0, slot 0: [23375] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [23375] ata_cmd: 1530:4ad2 00 00 44 00 38 8d a9 00-00 00 c8 43 ..D.8......C [23375] sg_list: 0638:7d80 24 80 81 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... [23375] executing polled cmd on slot 0...[23750] ata_read_pp(): blocks transferred = 68 [23750] [23750] ahci_stop_port 0.5 [23750] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [23750] IORB 06c8:2914 removed (queue = 0610:5e92) [23750] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [23750] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [23750] ahci_read(0.5.0, 186289292, 1) [23750] ahci_reset_port: resetting port 0.5 [23750] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [23750] ahci_stop_port 0.5 [23750] ahci_reset_port: setting link speed and power management options [23750] ahci_reset_port: issuing COMRESET on port 5 [23751] Wait for communication... [23781] ahci_reset_port: starting port 5 again [23781] ahci_start_port 0.5 [23781] ahci_start_port: PORT_SCR_STAT = 0x113 [23781] ahci_start_port: PORT_SCR_ERR = 0x0 [24312] ahci_reset_port: PORT_TFDATA = 0x150 [24312] ATA command for 0.5.0, slot 0: [24312] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [24312] ata_cmd: 1530:4ad2 00 00 01 00 8c 8c 1a 00-00 00 c8 4b ...........K [24312] sg_list: 0638:7d80 d4 05 82 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [24312] executing polled cmd on slot 0...[24687] ata_read_pp(): blocks transferred = 1 [24687] [24687] ahci_stop_port 0.5 [24687] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [24687] IORB 06c8:2914 removed (queue = 0610:5e92) [24687] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [24687] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [24687] ahci_read(0.5.0, 186289292, 68) [24687] ahci_reset_port: resetting port 0.5 [24687] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [24687] ahci_stop_port 0.5 [24687] ahci_reset_port: setting link speed and power management options [24687] ahci_reset_port: issuing COMRESET on port 5 [24689] Wait for communication... [24718] ahci_reset_port: starting port 5 again [24718] ahci_start_port 0.5 [24718] ahci_start_port: PORT_SCR_STAT = 0x113 [24718] ahci_start_port: PORT_SCR_ERR = 0x0 [25250] ahci_reset_port: PORT_TFDATA = 0x150 [25250] ATA command for 0.5.0, slot 0: [25250] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [25250] ata_cmd: 1530:4ad2 00 00 44 00 8c 8c 1a 00-00 00 c8 4b ..D........K [25250] sg_list: 0638:7d80 24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... [25250] executing polled cmd on slot 0...[25625] ata_read_pp(): blocks transferred = 68 [25625] [25625] ahci_stop_port 0.5 [25625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [25625] IORB 06c8:2914 removed (queue = 0610:5e92) [25625] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [25625] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [25625] ahci_read(0.5.0, 186289224, 1) [25625] ahci_reset_port: resetting port 0.5 [25625] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [25625] ahci_stop_port 0.5 [25625] ahci_reset_port: setting link speed and power management options [25625] ahci_reset_port: issuing COMRESET on port 5 [25626] Wait for communication... [25656] ahci_reset_port: starting port 5 again [25656] ahci_start_port 0.5 [25656] ahci_start_port: PORT_SCR_STAT = 0x113 [25656] ahci_start_port: PORT_SCR_ERR = 0x0 [26187] ahci_reset_port: PORT_TFDATA = 0x150 [26187] ATA command for 0.5.0, slot 0: [26187] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [26187] ata_cmd: 1530:4ad2 00 00 01 00 48 8c 1a 00-00 00 c8 4b ....H......K [26187] sg_list: 0638:7d80 e8 1d 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [26187] executing polled cmd on slot 0...[26562] ata_read_pp(): blocks transferred = 1 [26562] [26562] ahci_stop_port 0.5 [26562] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [26562] IORB 06c8:2914 removed (queue = 0610:5e92) [26562] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [26562] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [26562] ahci_read(0.5.0, 186289224, 68) [26562] ahci_reset_port: resetting port 0.5 [26562] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [26562] ahci_stop_port 0.5 [26562] ahci_reset_port: setting link speed and power management options [26562] ahci_reset_port: issuing COMRESET on port 5 [26564] Wait for communication... [26593] ahci_reset_port: starting port 5 again [26593] ahci_start_port 0.5 [26593] ahci_start_port: PORT_SCR_STAT = 0x113 [26593] ahci_start_port: PORT_SCR_ERR = 0x0 [27156] ahci_reset_port: PORT_TFDATA = 0x150 [27156] ATA command for 0.5.0, slot 0: [27156] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [27156] ata_cmd: 1530:4ad2 00 00 44 00 48 8c 1a 00-00 00 c8 4b ..D.H......K [27156] sg_list: 0638:7d80 24 f0 80 bc 00 00 00 00-00 00 00 00 ff 87 00 00 $............... [27156] executing polled cmd on slot 0...[27531] ata_read_pp(): blocks transferred = 68 [27531] [27531] ahci_stop_port 0.5 [27531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [27531] IORB 06c8:2914 removed (queue = 0610:5e92) [27531] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [27531] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [27531] ahci_read(0.5.0, 61443380, 4) [27531] ahci_reset_port: resetting port 0.5 [27531] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [27531] ahci_stop_port 0.5 [27531] ahci_reset_port: setting link speed and power management options [27531] ahci_reset_port: issuing COMRESET on port 5 [27533] Wait for communication... [27562] ahci_reset_port: starting port 5 again [27562] ahci_start_port 0.5 [27562] ahci_start_port: PORT_SCR_STAT = 0x113 [27562] ahci_start_port: PORT_SCR_ERR = 0x0 [28125] ahci_reset_port: PORT_TFDATA = 0x150 [28125] ATA command for 0.5.0, slot 0: [28125] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [28125] ata_cmd: 1530:4b3a 00 00 04 00 34 8d a9 00-00 00 c8 43 ....4......C [28125] sg_list: 0638:7d80 e8 17 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00 ................ [28125] executing polled cmd on slot 0...[28500] ata_read_pp(): blocks transferred = 4 [28500] [28500] ahci_stop_port 0.5 [28500] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [28500] IORB 06c8:2914 removed (queue = 0610:5e92) [28500] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [28500] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [28500] ahci_read(0.5.0, 186289220, 4) [28500] ahci_reset_port: resetting port 0.5 [28500] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [28500] ahci_stop_port 0.5 [28500] ahci_reset_port: setting link speed and power management options [28500] ahci_reset_port: issuing COMRESET on port 5 [28501] Wait for communication... [28531] ahci_reset_port: starting port 5 again [28531] ahci_start_port 0.5 [28531] ahci_start_port: PORT_SCR_STAT = 0x113 [28531] ahci_start_port: PORT_SCR_ERR = 0x0 [29062] ahci_reset_port: PORT_TFDATA = 0x150 [29062] ATA command for 0.5.0, slot 0: [29062] cmd_hdr: 0638:7800 05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00 ................ [29062] ata_cmd: 1530:4b3a 00 00 04 00 44 8c 1a 00-00 00 c8 4b ....D......K [29062] sg_list: 0638:7d80 74 0d 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00 t............... [29062] executing polled cmd on slot 0...[29437] ata_read_pp(): blocks transferred = 4 [29437] [29437] ahci_stop_port 0.5 [29437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [29437] IORB 06c8:2914 removed (queue = 0610:5e92) [29437] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000) [29437] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0610:5a4a [driver], timeout = 0) [29437] leaving initialization mode [29437] ahci_complete_init: completing initialization of adapter #0 [29437] registering interrupt #16 [29437] ahci_complete_init: resetting port 0 [29437] ahci_reset_port: resetting port 0.0 [29437] AHCI port 0 registers: PORT_CMD = 0x4002006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x123 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x150 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [29437] ahci_stop_port 0.0 [29437] ahci_reset_port: setting link speed and power management options [29437] ahci_reset_port: issuing COMRESET on port 0 [29439] Wait for communication... [29468] ahci_reset_port: starting port 0 again [29468] ahci_start_port 0.0 [29468] ahci_start_port: PORT_SCR_STAT = 0x123 [29468] ahci_start_port: PORT_SCR_ERR = 0x0 [29500] ahci_reset_port: PORT_TFDATA = 0x150 [29500] ahci_complete_init: resetting port 1 [29500] ahci_reset_port: resetting port 0.1 [29500] AHCI port 1 registers: PORT_CMD = 0xc0006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [29500] ahci_stop_port 0.1 [29500] ahci_reset_port: setting link speed and power management options [29500] ahci_reset_port: issuing COMRESET on port 1 [29501] Wait for communication... [29531] ahci_reset_port: starting port 1 again [29531] ahci_start_port 0.1 [29531] ahci_start_port: PORT_SCR_STAT = 0x113 [29531] ahci_start_port: PORT_SCR_ERR = 0x0 [29531] ahci_reset_port: PORT_TFDATA = 0x100 [29531] ahci_complete_init: resetting port 5 [29531] ahci_reset_port: resetting port 0.5 [29531] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [29531] ahci_stop_port 0.5 [29531] ahci_reset_port: setting link speed and power management options [29531] ahci_reset_port: issuing COMRESET on port 5 [29533] Wait for communication... [29562] ahci_reset_port: starting port 5 again [29562] ahci_start_port 0.5 [29562] ahci_start_port: PORT_SCR_STAT = 0x113 [29562] ahci_start_port: PORT_SCR_ERR = 0x0 [30093] ahci_reset_port: PORT_TFDATA = 0x150 Adapter 0: PCI=0:31:2 ID=8086:3b2f Intel PCH AHCI irq=16 addr=0xf2427000 version=10300 Port 0: Drive 0: Drive present but n[130425] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [130425] ahci_read(0.5.0, 20493119, 8) [130425] ATA command for 0.5.0, slot 19: [130425] cmd_hdr: 0638:7a60 05 00 01 00 00 00 00 00-80 5f f1 00 00 00 00 00 ........._...... [130425] ata_cmd: 1530:562a 00 00 08 00 3f b3 38 00-00 00 c8 41 ....?.8....A [130425] sg_list: 0638:c000 00 10 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ [130425] issuing command on slot 19 [130787] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130787] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00080000 [130787] ata_read_pp(): blocks transferred = 8 [130787] IORB 06f8:7e1f removed (queue = 0610:5e92) [130787] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) [130787] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [130787] ahci_read(0.5.0, 23688319, 8) [130787] ATA command for 0.5.0, slot 20: [130787] cmd_hdr: 0638:7a80 05 00 01 00 00 00 00 00-00 63 f1 00 00 00 00 00 .........c...... [130787] ata_cmd: 1530:5432 00 00 08 00 7f 74 69 00-00 00 c8 41 ....ti....A [130787] sg_list: 0638:c380 00 20 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 . .............. [130787] issuing command on slot 20 [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00100000 [130798] ata_read_pp(): blocks transferred = 8 [130798] IORB 06f8:7e1f removed (queue = 0610:5e92) [130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) [130798] IORB 06f8:7e1f queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0) [130798] ahci_write(0.5.0, 61409927, 8) [130798] ATA command for 0.5.0, slot 21: [130798] cmd_hdr: 0638:7aa0 45 00 01 00 00 00 00 00-80 66 f1 00 00 00 00 00 E........f...... [130798] ata_cmd: 1530:54a4 00 00 08 00 87 0a a9 00-00 00 ca 43 ...........C [130798] sg_list: 0638:c700 00 b0 cb bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ [130798] issuing command on slot 21 [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00200000 [130798] ata_write_pp(): blocks transferred = 8 [130798] IORB 06f8:7e1f removed (queue = 0610:5e92) [130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000) [130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [130798] ahci_read(0.5.0, 20488207, 8) [130798] ATA command for 0.5.0, slot 22: [130798] cmd_hdr: 0638:7ac0 05 00 01 00 00 00 00 00-00 6a f1 00 00 00 00 00 .........j...... [130798] ata_cmd: 15e8:fd96 00 00 08 00 0f a0 38 00-00 00 c8 41 ......8....A [130798] sg_list: 0638:ca80 00 30 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .0.............. [130798] issuing command on slot 22 [130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00400000 [130798] ata_read_pp(): blocks transferred = 8 [130798] IORB 06f8:7d0e removed (queue = 0610:5e92) [130798] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) [130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [130798] ahci_read(0.5.0, 20487815, 8) [130798] ATA command for 0.5.0, slot 23: [130798] cmd_hdr: 0638:7ae0 05 00 01 00 00 00 00 00-80 6d f1 00 00 00 00 00 .........m...... [130798] ata_cmd: 1530:56fe 00 00 08 00 87 9e 38 00-00 00 c8 41 ......8....A [130798] sg_list: 0638:ce00 00 40 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .@.............. [130798] issuing command on slot 23 [130800] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130800] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00800000 [130800] ata_read_pp(): blocks transferred = 8 [130800] IORB 06f8:7d0e removed (queue = 0610:5e92) [130800] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) [130800] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0) [130800] ahci_read(0.5.0, 20488719, 8) [130800] ATA command for 0.5.0, slot 24: [130800] cmd_hdr: 0638:7b00 05 00 01 00 00 00 00 00-00 71 f1 00 00 00 00 00 .........q...... [130800] ata_cmd: 1530:56de 00 00 08 00 0f a2 38 00-00 00 c8 41 ......8....A [130800] sg_list: 0638:d180 00 50 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .P.............. [130800] issuing command on slot 24 [130832] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e [130832] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x01000000 [130832] ata_read_pp(): blocks transferred = 8 [130832] IORB 06f8:7d0e removed (queue = 0610:5e92) [130832] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000) [130832] IORB 06f8:7d0e queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0) [130832] ahci_write(0.5.0, 27831087, 64) [130832] ATA command for 0.5.0, slot 25: [130832] cmd_hdr: 0638:7b20 45 00 08 00 00 00 00 00-80 74 f1 00 00 00 00 00 E........t...... [130832] ata_cmd: 1530:58c8 00 00 40 00 2f ab a8 00-00 00 ca 41 ..@./......A [130832] sg_list: 0638:d500 00 e0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ 0638:d510 00 f0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ 0638:d520 00 00 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ 0638:d530 00 10 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 ................ 0638:d540 00 20 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 . .............. 0638:d550 00 30 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .0.............. 0638:d560 00 40 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .@.............. 0638:d570 00 50 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00 .P.............. [130832] issuing command on slot 25