ASUS M3A, SMP doesn't work

[eco]

From: MichelPB

Motherboard: ​http://ecomstation.ru/hardware.php?action=item&id=1401

С OS2APIC мультиядерность работает.

С ACPI проблемы.

Высылаю логи по системе

С Acpi мать так и не заводиться

Лог по системе с uni ядром остановка на этапе загрузки драйвера клавиатуры.

[pasha]

ATI (AMD) chipset

[eco]

ACPI 3.14

e-co:

<MichelPB_H> Сегодня поставил 3.14 - на уни режиме загрузка пролетает до

kbdbase.sys

<MichelPB_H> далее остановка и через некоторое время сообщение о потери

диска (kbdbase.sys отсутствует)

<|e-co|dev> MichelPB_H т.е. не намного дальше? <|e-co|dev> а люди говорят, что до граф.режима почти доходят <MichelPB_H> |e-co|dev - в уни режиме с ключами с [Pasha] добивались

нормальной работы

[eco]

MichelPB:

с новым ядром загрузился как в uni режиме так и в smp c os2apic команда C:\>copy oemhlp$ kernel.log The system cannot open the device or file specified.

0 file(s) copied.

не отдает лог

с ACPI:

загрузка наубом не получилась uni с acpi - получаю такую кашу на экране

[pasha]

AMD chipset. With memory file from OS/4 kernel boot and work right. So here is't acpi problem

[ecsnl]

From what I remember you wrote on the ACPI DEV mailing list the systems with an AMD chipset seem to behave different with INT 13 support when having ACPI loaded.

[pasha]

When acpi turn on, int 13h don't work.

[Steven Levine]

Replying to pasha:

AMD chipset. With memory file from OS/4 kernel boot and work right. So here is't acpi problem

Another way of looking at this is that the acpi.psd does not work correctly with the OS/2 kernels that we must use. The requirement is to develop a usable acpi.psd for use with the OS/2 kernels that we have available. It has always been the case.

We we need to discuss is what options we have to resolve the problem. Can be patch the kernel at load time? Do we need to enhance the bootable JFS bootloader to support what we need?

If feel this all to complex to handle given your current workload, we can move the ticket to a future milestone.

[pasha]

Another way of looking at this is that turn on ACPI subsystem does not work correctly with the OS/2 kernels that we must use. This requirement is develop a usable hardware for use with the OS/2 kernels that we have available. So, need ask to AMD about problem.

Discuss we have in acpi-dev - result is 0

What is need. Need, that kernel don't use int 13h RM call after turn on acpi subsystem.

[eco]

e-co:

MichelPB reports:

Can't boot with ACPI 3.16 (I can boot with 3.14)

RUS: <Michelpb> [Pasha] - Приветствую ! <Michelpb> чего-то не могу завести последний acpi.psd <Michelpb> как нибудь надо опять поработать

[David Azarewicz]

This ticket is for an unsupported version. Please open a new ticket if you still have problems after using the current version.