Opened 12 years ago

Closed 11 years ago

#169 closed defect (fixed)

ACPI problems in RC4

Reported by: guest Owned by: pasha
Priority: major Milestone: Release version 3.08
Component: ACPI PSD Version: 3.05
Keywords: Cc:

Description

I have just installed eCS 2.0RC4 on my ASUS M2V-TVM based AMD X2 system with the following results.

The system does not use both processors despite the /SMP switch and /PIC switches being set on ACPI.PSD in config.sys and the SMP kernel being loaded.

Requesting the system to shut down and power off does not work, rather it reboots again.

After turning on Archiving, the system hangs at the point where the WPS should load - hard stop CAD does not work - only power off.

overwriting the ACPI, APM and Resource.sys files from eCS 2.0 RC3 and rebooting clears the hang and the system runs on both processor cores coirrectly.

Cheers/2

Ed.

Attachments (2)

acpidaemon.log.hangv305 (1.1 KB) - added by guest 12 years ago.
Here's the ACPIDaemon log of the failure
acpidaemon.log (1.1 KB) - added by guest 12 years ago.
Here's the log using the v 3.03 - (successful boot).

Download all attachments as: .zip

Change History (6)

Changed 12 years ago by guest

Here's the ACPIDaemon log of the failure

Changed 12 years ago by guest

Here's the log using the v 3.03 - (successful boot).

comment:1 Changed 12 years ago by guest

As you will see from the attached logs - there appears to be no difference !

Are there additional logs, or are these only created if one runs the debug versions of the ACPI support files ?

Cheers/2

Ed

edurrant at durrant dot mine dot nu

comment:2 Changed 12 years ago by pasha

copy acpica$ acpi.log works in any version, attach pls this log.

comment:3 Changed 12 years ago by eco

Please download experimental ACPI build from Mensys site:

comment:4 Changed 11 years ago by guest

  • Resolution set to fixed
  • Status changed from new to closed

I can confirm that with version 3.7, the WPS and boot hang no longer occur, however when doing a shutdown, the system still reboots rather than closing down - I believe this is a hardware related incompatibility with just my system - I have gone back to V 3.03 for this reason. The more major, hang issue has been resolved however so this ticket should be closed.

Note: See TracTickets for help on using tickets.