Ticket #72: acpi303.txt

File acpi303.txt, 10.9 KB (added by Yuri Dario, 17 years ago)

acpica log from acpi 3.03

Line 
1AllocIRQMem at 0xFFE88000 (24576 bytes)
2
3PSD_install options:" /FS /CD" @#netlabs dot org:3.3#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Sep 28 2007 12:24:23
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xF9700000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9D000
8AcpiOsCreateLock 8
9AcpiOsCreateLock 8
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsCreateSemaphore: O.K. Handle=0xF97003F8 M:1 I:0
15AcpiOsPredefinedOverride: "_OSI"
16AcpiOsPredefinedOverride: override to eCS
17*** AcpiInitializeSubsystem Status = 0 ***
18AcpiOsMapMemory start 0xF9710000 map:0x40E size 0x2
19AcpiOsMapMemory start 0xF9710000 map:0x9F000 size 0x400
20AcpiOsMapMemory start 0xF9710000 map:0xE0000 size 0x20000
21AcpiOsMapMemory start 0xF9710000 map:0xFC9B0 size 0x24
22ACPI: RSDP @ 0xFC9B0/0x14 (v0 DELL )
23AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x24
24ACPI: RSDT @ 0x3FFDA7D3/0x40 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61)
25AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x40
26AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x24
27ACPI: FACP @ 0x3FFDB400/0x74 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61)
28AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x74
29AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x24
30ACPI: DSDT @ 0x3FFDC000/0x2A1A (v1 INT430SYSFexxx SYSFexxx 0x1001 MSFT 0x100000E)
31AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x24
32ACPI: FACS @ 0x3FFEA800/0x40
33AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x24
34ACPI: APIC @ 0x3FFDBC00/0x68 (v1 DELL CPi R CPi R 0x27D50913 ASL G 0x47)
35AcpiOsMapMemory start 0xF9710000 map:0x3FFDBBC0 size 0x24
36ACPI: MCFG @ 0x3FFDBBC0/0x3E (v16 DELL CPi R CPi R 0x27D50913 ASL a 0x61)
37AcpiOsMapMemory start 0xF9710000 map:0x3FFDB7C0 size 0x24
38ACPI: BOOT @ 0x3FFDB7C0/0x28 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61)
39AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x24
40ACPI: SSDT @ 0x3FFDABE6/0x23E (v1 PmRef Cpu0Ist 0x3000 INTL" 0x20030522)
41AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x24
42ACPI: SSDT @ 0x3FFDAA0E/0x1D8 (v1 PmRef Cpu0Cst 0x3001 INTL" 0x20030522)
43AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x24
44ACPI: SSDT @ 0x3FFDA813/0x1FB (v1 PmRef CpuPm 0x3000 INTL" 0x20030522)
45*** AcpiInitializeTables Status = 0 ***
46AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x2A1A
47AcpiOsTableOverride Ex:FFE85000 New:FFCFFFC4 SIG:[DSDT]
48AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x23E
49AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x1D8
50AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x1FB
51*** AcpiLoadTables Status = 0 ***
52Table [DSDT]
53Table [FACS]
54Table [FACP]
55Table [APIC]
56AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x68
57Local APIC address: FEE00000h
58System also has 8259
59APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
60APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable
61APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
62APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
63APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
64APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
65APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
66Table [MCFG]
67Table [BOOT]
68Table [SSDT]
69Table [SSDT]
70Table [SSDT]
71Size of FACDT 244
72Type of computer - Unspecified
73System vector the SCI interrupt is wired to in 8259 mode. 9
74System port address of the SMI Command Port 0xB2
75The value to write to SMI_CMD to disable SMI 0x70
76The value to write to SMI_CMD to re-enable SMI 0x71
77The value to write to SMI_CMD to enter the S4BIOS state 0x97
78The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80
79System port address of the PM1a Event Register Block 1000
80System port address of the PM1b Event Register Block 0
81Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
82System port address of the PM1a Control Register Block 1004
83System port address of the PM1b Control Register Block 0
84Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
85System port address of the PM2 Control Register Block 1020
86Number of bytes decoded by PM2_CNT_BLK 1
87System port address of the Power Management Timer Control Register Block 1008
88Number of bytes decoded by PM_TMR_BLK (=4) 4
89System port address of General-Purpose Event 0 Register Block 1028
90System port address of General-Purpose Event 1 Register Block 0
91Number of bytes decoded by GPE0_BLK 0x8
92Number of bytes decoded by GPE1_BLK 0x0
93Offset within the ACPI general-purpose event model where GPE1 based events start 0
94GPE enable register: 0: 0: 0: 1
95GPE status register: 0: 0: FF: EE
96The worst-case hardware latency to enter and exit a C2 state 50 us
97The worst-case hardware latency to enter and exit a C3 state 50 us
98The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
99The bit width of the processor's duty cycle setting value in the P_CNT register 3
100The RTC CMOS RAM index to the day-of-month alarm value 13
101The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
102IA-PC Boot Architecture Flags 0x0
103Fixed feature flags 2B5
104The reset register:
105Type of address space - System Memory
106Register Bit Width 0
107Register Bit Offset 0
108Access size 0
109Address 0
110The value to write to the RESET_REG port to reset the system 0
111***** Throttl Width 3 Offset 1
112AcpiOsInstallIntterrupHandler IRQ9 handler F9730A29
113AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x40
114************ AcpiEnableSubsystem Status = 0
115AcpiOsDerivePCIID([PCI0] ,[PIR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
116AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
117************ Scan EC Status = 0
118AcpiOsAllocate: new pool F8F30000
119************ AcpiInitializeObjects mask:0 Status = 0
120Processor [CPU0]
121Processor [CPU1]
122Status 0x0 0
123************ AcpiInstallNotifyHandler System Status = 0
124************ AcpiInstallNotifyHandler Device Status = 0
125AcpiOsMapMemory start 0xF9710000 map:0xFEE00000 size 0x400
126AcpiOsMapMemory start 0xF9710000 map:0xFEC00000 size 0x20
127PSDFree: at 0xF9C00000 success!
1280:0.0 Class:600 Hdr:0 Bridge H->0
1290:1.0 Class:604 Hdr:1 Bridge 0->1
1300:29.0 Class:C03 Hdr:80
1310:29.1 Class:C03 Hdr:0
1320:29.2 Class:C03 Hdr:0
1330:29.3 Class:C03 Hdr:0
1340:29.7 Class:C03 Hdr:0
1350:30.0 Class:604 Hdr:81 Bridge 0->3..4
1360:30.2 Class:401 Hdr:0
1370:31.0 Class:601 Hdr:80
1380:31.2 Class:101 Hdr:0
1390:31.3 Class:C05 Hdr:0
1401:0.0 Class:300 Hdr:0
1413:0.0 Class:200 Hdr:0
1423:1.0 Class:607 Hdr:82 Bridge 3->4
1433:1.1 Class:C00 Hdr:80
1443:1.2 Class:805 Hdr:80
1453:3.0 Class:280 Hdr:0
146PCI Bus scan: 5 PCI buses found.
147Scan ACPI tree for PCI functions
1480:0.0 'PCI0'' (F9702F50)
1490:31.0 'ISAB#' (F9703388)
1500:29.0 'USB0#' (F9703F58)
1510:29.1 'USB1#' (F9704238)
1520:29.2 'USB2#' (F9704498)
1530:29.3 'USB4#' (F97046F8)
1540:29.7 'USB3#' (F9704958)
1550:31.2 'IDE0#' (F9705EB8)
1560:30.2 'AUD_#' (F9707E70)
1570:30.3 'MODM#' (F9707EC0)
1580:1.0 'AGP_#' (F9707F38)
1591:0.0 'VID_#' (F9708038)
1600:30.0 'PCIE#' (F97087E8)
1613:1.0 'CRD0#' (F9708910)
1623:1.5 'CRD1#' (F9708A10)
163Bridges found:
1640:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9702F50) _PRT
1650:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9707F38) _PRT
1660:30.0 class:604 type: 1 Bus 0->3 ACPI: 'PCIE' (F97087E8) _PRT
1673:1.0 class:607 type: 2 Bus 3->4 ACPI: 'CRD0' (F9708910)
168IRQLinks found:
1690: 'LNKC' (F9705418) P[*9, 10, 11] <- 3:1.1 3:0.0 0:29.2
170 A[]
1711: 'LNKB ' (F97051F8) P[ 5, 7] <- 3:3.0 3:1.2 0:31.3 0:31.2 0:29.1
172 A[]
1732: 'LNKD ' (F9705638) P[ 5,*7, 9, 10, 11] <- 3:1.0 0:29.3
174 A[]
1753: 'LNKA' (F9704FD8) P[ 9, 10,*11] <- 1:0.0 0:30.2 0:29.7 0:29.0
176 A[]
177PCI devices found:
1780:0.0 8086:2590 'PCI0'
1790:1.0 8086:2591 'AGP_'
1800:29.0 8086:2658 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1810:29.1 8086:2659 'USB1' IRQs: PCI:10 PIC:'LNKB':0 APIC:17
1820:29.2 8086:265A 'USB2' IRQs: PCI:9 PIC:'LNKC':9 APIC:18
1830:29.3 8086:265B 'USB4' IRQs: PCI:7 PIC:'LNKD':7 APIC:19
1840:29.7 8086:265C 'USB3' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1850:30.0 8086:2448 'PCIE'
1860:30.2 8086:266E 'AUD_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1870:31.0 8086:2641 'ISAB'
1880:31.2 8086:2653 'IDE0' IRQs: PCI:10 PIC:'LNKB':0 APIC:17
1890:31.3 8086:266A IRQs: PCI:10 PIC:'LNKB':0 APIC:17
1901:0.0 1002:5460 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI
1913:0.0 14E4:170C IRQs: PCI:9 PIC:'LNKC':9 APIC:18
1923:1.0 1180:476 'CRD0' IRQs: PCI:0 PIC:'LNKD':7 APIC:19
1933:1.1 1180:552 IRQs: PCI:9 PIC:'LNKC':9 APIC:18
1943:1.2 1180:822 IRQs: PCI:10 PIC:'LNKB':0 APIC:17
1953:3.0 8086:4220 IRQs: PCI:10 PIC:'LNKB':0 APIC:17
196************ AcpiInstall Power Device Status = 0
197ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
198ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
199************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
200************ AcpiInstall PMTimer Device Status = 0
201** Total use:97600 unuse:11976 count:1513 **
202Get GpeHdl Status = 0 - AE_OK
203Event [_L1D]
204Install GPE 1D Status 0
205Set type GPE 1D Status 0
206Event [_L1C]
207Install GPE 1C Status 0
208Set type GPE 1C Status 0
209Event [_L0B]
210Install GPE B Status 0
211Set type GPE B Status 0
212Event [_L18]
213Install GPE 18 Status 0
214Set type GPE 18 Status 0
215Event [_L03]
216Install GPE 3 Status 0
217Set type GPE 3 Status 0
218Event [_L04]
219Install GPE 4 Status 0
220Set type GPE 4 Status 0
221Event [_L0C]
222Install GPE C Status 0
223Set type GPE C Status 0
224Event [_L0D]
225Install GPE D Status 0
226Set type GPE D Status 0
227Event [_L0E]
228Install GPE E Status 0
229Set type GPE E Status 0
230Event [_L05]
231Install GPE 5 Status 0
232Set type GPE 5 Status 0
233EndScan GPE Status 0
234===== Info ========
235Int Level 9
236In Xrupt F970C2C0 in arg F970C2C0
237 Node
238Name [_GPE]
239Flags: 0
240Reg count 4
241GPE0 Status:1028 Enable:102C EnableWake:0 EnableRun:38 BaseGPENumber:0
242GPE1 Status:1029 Enable:102D EnableWake:0 EnableRun:78 BaseGPENumber:8
243GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
244GPE3 Status:102B Enable:102F EnableWake:0 EnableRun:31 BaseGPENumber:18
245=========== Status 0x0 0
246AcpiOsExecute type:1
247AcpiOsExecute - direct executing
248*** Device Notify ***
249Dev: [AC__] Value:80
250************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
251APM: PSD find success. PSD Ftable:F9C101C0
252Register Notify 1st FFCB718E
253FindPCIDevice
254 Need: B:0 D:1F F:2
255Finding APIC17 PIC10 Dev: [IDE0]
256Gradd: PSD find success. PSD Ftable:F9C101C0
257APM: Found AC "AC__"
258APM: Found Smart Battery "BAT0"
259******** Event tread ***************
260APM: Unsetting suspend state
261******** Notify wait Counter 0 ***************