AllocIRQMem at 0xFFE88000 (24576 bytes) PSD_install options:" /FS /CD" @#netlabs dot org:3.3#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Sep 28 2007 12:24:23 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 AcpiOsInitialize ALLOC size 65536 at 0xF9700000 AcpiOsInitialize MapMem size 4096 at 0xFFE9D000 AcpiOsCreateLock 8 AcpiOsCreateLock 8 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_GL_" AcpiOsCreateSemaphore: O.K. Handle=0xF97003F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** AcpiOsMapMemory start 0xF9710000 map:0x40E size 0x2 AcpiOsMapMemory start 0xF9710000 map:0x9F000 size 0x400 AcpiOsMapMemory start 0xF9710000 map:0xE0000 size 0x20000 AcpiOsMapMemory start 0xF9710000 map:0xFC9B0 size 0x24 ACPI: RSDP @ 0xFC9B0/0x14 (v0 DELL ) AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x24 ACPI: RSDT @ 0x3FFDA7D3/0x40 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61) AcpiOsMapMemory start 0xF9710000 map:0x3FFDA7D3 size 0x40 AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x24 ACPI: FACP @ 0x3FFDB400/0x74 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61) AcpiOsMapMemory start 0xF9710000 map:0x3FFDB400 size 0x74 AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x24 ACPI: DSDT @ 0x3FFDC000/0x2A1A (v1 INT430SYSFexxx SYSFexxx 0x1001 MSFT 0x100000E) AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x24 ACPI: FACS @ 0x3FFEA800/0x40 AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x24 ACPI: APIC @ 0x3FFDBC00/0x68 (v1 DELL CPi R CPi R 0x27D50913 ASL G 0x47) AcpiOsMapMemory start 0xF9710000 map:0x3FFDBBC0 size 0x24 ACPI: MCFG @ 0x3FFDBBC0/0x3E (v16 DELL CPi R CPi R 0x27D50913 ASL a 0x61) AcpiOsMapMemory start 0xF9710000 map:0x3FFDB7C0 size 0x24 ACPI: BOOT @ 0x3FFDB7C0/0x28 (v1 DELL CPi R CPi R 0x27D50913 ASL a 0x61) AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x24 ACPI: SSDT @ 0x3FFDABE6/0x23E (v1 PmRef Cpu0Ist 0x3000 INTL" 0x20030522) AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x24 ACPI: SSDT @ 0x3FFDAA0E/0x1D8 (v1 PmRef Cpu0Cst 0x3001 INTL" 0x20030522) AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x24 ACPI: SSDT @ 0x3FFDA813/0x1FB (v1 PmRef CpuPm 0x3000 INTL" 0x20030522) *** AcpiInitializeTables Status = 0 *** AcpiOsMapMemory start 0xF9710000 map:0x3FFDC000 size 0x2A1A AcpiOsTableOverride Ex:FFE85000 New:FFCFFFC4 SIG:[DSDT] AcpiOsMapMemory start 0xF9710000 map:0x3FFDABE6 size 0x23E AcpiOsMapMemory start 0xF9710000 map:0x3FFDAA0E size 0x1D8 AcpiOsMapMemory start 0xF9710000 map:0x3FFDA813 size 0x1FB *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [APIC] AcpiOsMapMemory start 0xF9710000 map:0x3FFDBC00 size 0x68 Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable APIC_IO: IO ApicID 1h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge Table [MCFG] Table [BOOT] Table [SSDT] Table [SSDT] Table [SSDT] Size of FACDT 244 Type of computer - Unspecified System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0x70 The value to write to SMI_CMD to re-enable SMI 0x71 The value to write to SMI_CMD to enter the S4BIOS state 0x97 The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80 System port address of the PM1a Event Register Block 1000 System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 1004 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 1020 Number of bytes decoded by PM2_CNT_BLK 1 System port address of the Power Management Timer Control Register Block 1008 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register Block 1028 System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 1 GPE status register: 0: 0: FF: EE The worst-case hardware latency to enter and exit a C2 state 50 us The worst-case hardware latency to enter and exit a C3 state 50 us The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 The bit width of the processor's duty cycle setting value in the P_CNT register 3 The RTC CMOS RAM index to the day-of-month alarm value 13 The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 IA-PC Boot Architecture Flags 0x0 Fixed feature flags 2B5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 3 Offset 1 AcpiOsInstallIntterrupHandler IRQ9 handler F9730A29 AcpiOsMapMemory start 0xF9710000 map:0x3FFEA800 size 0x40 ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[PIR1],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 ************ Scan EC Status = 0 AcpiOsAllocate: new pool F8F30000 ************ AcpiInitializeObjects mask:0 Status = 0 Processor [CPU0] Processor [CPU1] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0 ************ AcpiInstallNotifyHandler Device Status = 0 AcpiOsMapMemory start 0xF9710000 map:0xFEE00000 size 0x400 AcpiOsMapMemory start 0xF9710000 map:0xFEC00000 size 0x20 PSDFree: at 0xF9C00000 success! 0:0.0 Class:600 Hdr:0 Bridge H->0 0:1.0 Class:604 Hdr:1 Bridge 0->1 0:29.0 Class:C03 Hdr:80 0:29.1 Class:C03 Hdr:0 0:29.2 Class:C03 Hdr:0 0:29.3 Class:C03 Hdr:0 0:29.7 Class:C03 Hdr:0 0:30.0 Class:604 Hdr:81 Bridge 0->3..4 0:30.2 Class:401 Hdr:0 0:31.0 Class:601 Hdr:80 0:31.2 Class:101 Hdr:0 0:31.3 Class:C05 Hdr:0 1:0.0 Class:300 Hdr:0 3:0.0 Class:200 Hdr:0 3:1.0 Class:607 Hdr:82 Bridge 3->4 3:1.1 Class:C00 Hdr:80 3:1.2 Class:805 Hdr:80 3:3.0 Class:280 Hdr:0 PCI Bus scan: 5 PCI buses found. Scan ACPI tree for PCI functions 0:0.0 'PCI0'' (F9702F50) 0:31.0 'ISAB#' (F9703388) 0:29.0 'USB0#' (F9703F58) 0:29.1 'USB1#' (F9704238) 0:29.2 'USB2#' (F9704498) 0:29.3 'USB4#' (F97046F8) 0:29.7 'USB3#' (F9704958) 0:31.2 'IDE0#' (F9705EB8) 0:30.2 'AUD_#' (F9707E70) 0:30.3 'MODM#' (F9707EC0) 0:1.0 'AGP_#' (F9707F38) 1:0.0 'VID_#' (F9708038) 0:30.0 'PCIE#' (F97087E8) 3:1.0 'CRD0#' (F9708910) 3:1.5 'CRD1#' (F9708A10) Bridges found: 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9702F50) _PRT 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F9707F38) _PRT 0:30.0 class:604 type: 1 Bus 0->3 ACPI: 'PCIE' (F97087E8) _PRT 3:1.0 class:607 type: 2 Bus 3->4 ACPI: 'CRD0' (F9708910) IRQLinks found: 0: 'LNKC' (F9705418) P[*9, 10, 11] <- 3:1.1 3:0.0 0:29.2 A[] 1: 'LNKB ' (F97051F8) P[ 5, 7] <- 3:3.0 3:1.2 0:31.3 0:31.2 0:29.1 A[] 2: 'LNKD ' (F9705638) P[ 5,*7, 9, 10, 11] <- 3:1.0 0:29.3 A[] 3: 'LNKA' (F9704FD8) P[ 9, 10,*11] <- 1:0.0 0:30.2 0:29.7 0:29.0 A[] PCI devices found: 0:0.0 8086:2590 'PCI0' 0:1.0 8086:2591 'AGP_' 0:29.0 8086:2658 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:29.1 8086:2659 'USB1' IRQs: PCI:10 PIC:'LNKB':0 APIC:17 0:29.2 8086:265A 'USB2' IRQs: PCI:9 PIC:'LNKC':9 APIC:18 0:29.3 8086:265B 'USB4' IRQs: PCI:7 PIC:'LNKD':7 APIC:19 0:29.7 8086:265C 'USB3' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:30.0 8086:2448 'PCIE' 0:30.2 8086:266E 'AUD_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:31.0 8086:2641 'ISAB' 0:31.2 8086:2653 'IDE0' IRQs: PCI:10 PIC:'LNKB':0 APIC:17 0:31.3 8086:266A IRQs: PCI:10 PIC:'LNKB':0 APIC:17 1:0.0 1002:5460 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI 3:0.0 14E4:170C IRQs: PCI:9 PIC:'LNKC':9 APIC:18 3:1.0 1180:476 'CRD0' IRQs: PCI:0 PIC:'LNKD':7 APIC:19 3:1.1 1180:552 IRQs: PCI:9 PIC:'LNKC':9 APIC:18 3:1.2 1180:822 IRQs: PCI:10 PIC:'LNKB':0 APIC:17 3:3.0 8086:4220 IRQs: PCI:10 PIC:'LNKB':0 APIC:17 ************ AcpiInstall Power Device Status = 0 ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE ************ AcpiInstall PMTimer Device Status = 0 ** Total use:97600 unuse:11976 count:1513 ** Get GpeHdl Status = 0 - AE_OK Event [_L1D] Install GPE 1D Status 0 Set type GPE 1D Status 0 Event [_L1C] Install GPE 1C Status 0 Set type GPE 1C Status 0 Event [_L0B] Install GPE B Status 0 Set type GPE B Status 0 Event [_L18] Install GPE 18 Status 0 Set type GPE 18 Status 0 Event [_L03] Install GPE 3 Status 0 Set type GPE 3 Status 0 Event [_L04] Install GPE 4 Status 0 Set type GPE 4 Status 0 Event [_L0C] Install GPE C Status 0 Set type GPE C Status 0 Event [_L0D] Install GPE D Status 0 Set type GPE D Status 0 Event [_L0E] Install GPE E Status 0 Set type GPE E Status 0 Event [_L05] Install GPE 5 Status 0 Set type GPE 5 Status 0 EndScan GPE Status 0 ===== Info ======== Int Level 9 In Xrupt F970C2C0 in arg F970C2C0 Node Name [_GPE] Flags: 0 Reg count 4 GPE0 Status:1028 Enable:102C EnableWake:0 EnableRun:38 BaseGPENumber:0 GPE1 Status:1029 Enable:102D EnableWake:0 EnableRun:78 BaseGPENumber:8 GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10 GPE3 Status:102B Enable:102F EnableWake:0 EnableRun:31 BaseGPENumber:18 =========== Status 0x0 0 AcpiOsExecute type:1 AcpiOsExecute - direct executing *** Device Notify *** Dev: [AC__] Value:80 ************ Leave Sleep Status = 0x5 - AE_NOT_FOUND APM: PSD find success. PSD Ftable:F9C101C0 Register Notify 1st FFCB718E FindPCIDevice Need: B:0 D:1F F:2 Finding APIC17 PIC10 Dev: [IDE0] Gradd: PSD find success. PSD Ftable:F9C101C0 APM: Found AC "AC__" APM: Found Smart Battery "BAT0" ******** Event tread *************** APM: Unsetting suspend state ******** Notify wait Counter 0 ***************