Ticket #63: acpi4.log

File acpi4.log, 12.4 KB (added by Chuck McKinnis, 17 years ago)
Line 
1AllocIRQMem at 0xFFEA3000 (24576 bytes)
2
3PSD_install options:" /EIS /VBE" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40
4MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
5SS Selector fault
6CFG: Link [LNKA] IRQ10
7CFG: Link [LNKH] IRQ6
8AcpiOsInitialize ALLOC size 65536 at 0xF99F3000
9AcpiOsInitialize MapMem size 4096 at 0xFFE91000
10AcpiOsCreateLock F99F31F0
11AcpiOsCreateLock F99F3208
12AcpiOsPredefinedOverride: "_REV"
13AcpiOsPredefinedOverride: "_OS_"
14AcpiOsPredefinedOverride: override to eComStation
15AcpiOsPredefinedOverride: "_GL_"
16AcpiOsCreateSemaphore: O.K. Handle=0xF99F3428 M:1 I:0
17AcpiOsPredefinedOverride: "_OSI"
18AcpiOsPredefinedOverride: override to eCS
19*** AcpiInitializeSubsystem Status = 0 ***
20ACPI: RSDP @ 0xF6D70/0x24 (v2 IBM )
21ACPI: XSDT @ 0x2FF6A672/0x4C (v1 IBM TP-1R 0x3230 LTP 0x0)
22ACPI: FACP @ 0x2FF6A700/0xF4 (v3 IBM TP-1R 0x3230 IBM 0x1)
23ACPI Warning (tbfadt-505): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20070320]
24ACPI: DSDT @ 0x2FF6A8E7/0xC530 (v1 IBM TP-1R 0x3230 MSFT 0x100000E)
25ACPI: FACS @ 0x2FF78000/0x40
26ACPI: SSDT @ 0x2FF6A8B4/0x33 (v1 IBM TP-1R 0x3230 MSFT 0x100000E)
27ACPI: ECDT @ 0x2FF76E17/0x52 (v1 IBM TP-1R 0x3230 IBM 0x1)
28ACPI: TCPA @ 0x2FF76E69/0x32 (v1 IBM TP-1R 0x3230 PTL 0x1)
29ACPI: BOOT @ 0x2FF76FD8/0x28 (v1 IBM TP-1R 0x3230 LTP 0x1)
30*** AcpiInitializeTables Status = 0 ***
31AcpiOsTableOverride Ex:FFE838E7 New:FFDEADA4 SIG:[DSDT]
32AcpiOsCreateSemaphore: O.K. Handle=0xF99F1A90 M:FFFFFFFF I:0
33*** AcpiLoadTables Status = 0 ***
34Table [DSDT]
35Table [FACS]
36Table [FACP]
37Table [SSDT]
38Table [ECDT]
39EC Control: 66:1:8:0:0
40EC Data: 62:1:8:0:0
41UID: 0
42GPE bit: 1C
43Name in ACPI:\_SB.PCI0.LPC.EC
44Status GetHandle: 0 - AE_OK
45Table [TCPA]
46Table [BOOT]
47Size of FACDT 244
48Type of computer - Mobile
49System vector the SCI interrupt is wired to in 8259 mode. 9
50System port address of the SMI Command Port 0xB2
51The value to write to SMI_CMD to disable SMI 0xF0
52The value to write to SMI_CMD to re-enable SMI 0xF1
53The value to write to SMI_CMD to enter the S4BIOS state 0x0
54The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3
55System port address of the PM1a Event Register Block 1000
56System port address of the PM1b Event Register Block 0
57Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
58System port address of the PM1a Control Register Block 1004
59System port address of the PM1b Control Register Block 0
60Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
61System port address of the PM2 Control Register Block 1020
62Number of bytes decoded by PM2_CNT_BLK 1
63System port address of the Power Management Timer Control Register Block 1008
64Number of bytes decoded by PM_TMR_BLK (=4) 4
65System port address of General-Purpose Event 0 Register Block 1028
66System port address of General-Purpose Event 1 Register Block 0
67Number of bytes decoded by GPE0_BLK 0x8
68Number of bytes decoded by GPE1_BLK 0x0
69Offset within the ACPI general-purpose event model where GPE1 based events start 0
70GPE enable register: 0: 0: 0: 10
71GPE status register: 0: 0: FF: 8
72The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4
73The worst-case hardware latency to enter and exit a C2 state 1 us
74The worst-case hardware latency to enter and exit a C3 state 85 us
75The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
76The bit width of the processor's duty cycle setting value in the P_CNT register 3
77The RTC CMOS RAM index to the day-of-month alarm value 13
78The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
79IA-PC Boot Architecture Flags 0x3
80Fixed feature flags 2AD
81The reset register:
82Type of address space - System I/O
83Register Bit Width 8
84Register Bit Offset 0
85Access size 0
86Address 3321
87The value to write to the RESET_REG port to reset the system 6
88***** Throttl Width 3 Offset 1
89AcpiOsInstallIntterrupHandler IRQ9 handler F9B90F09
90************ AcpiEnableSubsystem Status = 0
91************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9B51CAC - AE_OK
92Install GPE Status 0
93GpeSetType Status = 0 - AE_OK
94EC[0] GPE1C GpeEnable Status = 0 - AE_OK
95ACPI Error (dswstate-185): Result stack is empty! State=F99C4F60 [20070320]
96ACPI Exception (dsutils-766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
97ACPI Exception (dsutils-894): AE_AML_NO_RETURN_VALUE, While creating Arg 2 [20070320]
98ACPI Error (psparse-626): Method parse/execution failed [\_SB_._INI] (Node F99F47A0), AE_AML_NO_RETURN_VALUE
99AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
100AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
101AcpiEcSetup handle F99F8958 Function 0 Count 1
102AcpiWaitIBF timeout KEE 8 rc=640
103AcpiWaitOBF timeout KEE 2 rc=640
104AcpiWaitIBF timeout KEE 8 rc=640
105AcpiWaitIBF timeout KEE 0 rc=640
106AcpiWaitIBF timeout KEE 8 rc=640
107AcpiWaitOBF timeout KEE 2 rc=640
108AcpiWaitIBF timeout KEE 8 rc=640
109AcpiWaitIBF timeout KEE 0 rc=640
110AcpiWaitIBF timeout KEE 8 rc=640
111AcpiWaitOBF timeout KEE 2 rc=640
112AcpiWaitIBF timeout KEE 8 rc=640
113AcpiWaitOBF timeout KEE 2 rc=640
114AcpiWaitIBF timeout KEE 8 rc=640
115AcpiWaitIBF timeout KEE 0 rc=640
116AcpiWaitIBF timeout KEE 8 rc=640
117AcpiWaitOBF timeout KEE 2 rc=640
118AcpiWaitIBF timeout KEE 8 rc=640
119AcpiWaitIBF timeout KEE 0 rc=640
120AcpiWaitIBF timeout KEE 8 rc=640
121AcpiWaitOBF timeout KEE 2 rc=640
122AcpiWaitIBF timeout KEE 8 rc=640
123AcpiWaitIBF timeout KEE 0 rc=640
124AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:2 Dev:0 Fun:0
125AcpiOsDerivePCIID([PCI0] ,[CBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:2 Dev:0 Fun:1
126AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7
127************ AcpiInitializeObjects mask:0 Status = 0
128Processor [CPU_]
129Status 0x0 0
130Status Evaluate Processor PDC 0x0 AE_OK
131Status Evaluate Processor 0x0 AE_OK
132Status C 0x0 AE_OK
133Usable:1 Counter:0
134 CPU id to N:0
135 ProcId: 0x1
136 P_BLK: 0x1010
137 P_BLK len: 0x6
138CPU0 Status Evaluate _PCT 0x0 AE_OK
139 Perf control: 0xB2
140 Perf status: 0xB3
141AcpiWaitIBF timeout KEE 8 rc=640
142AcpiWaitOBF timeout KEE 2 rc=640
143CPU0 Status Evaluate _CST 0x0 AE_OK
144_CST has 4 Cstates
145 C1State control: 0x0
146 Latency: 1 uSec
147 Power consuption: 1000 mWatt
148 C2State control: 0x1014
149 Latency: 1 uSec
150 Power consuption: 500 mWatt
151 C3State control: 0x1015
152 Latency: 85 uSec
153 Power consuption: 250 mWatt
154 C3State control: 0x1016
155 Latency: 185 uSec
156 Power consuption: 100 mWatt
157************ AcpiInstallNotifyHandler System Status = 0
158************ AcpiInstallNotifyHandler Device Status = 0
159Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
160AcpiWaitIBF timeout KEE 8 rc=640
161AcpiWaitOBF timeout KEE 2 rc=640
162AcpiWaitIBF timeout KEE 8 rc=640
163AcpiWaitOBF timeout KEE 2 rc=640
164Finding:1 bridges
1650:0.0 Class:600 Hdr:0 Bridge H->0
1660:1.0 Class:604 Hdr:1 Bridge 0->1
1670:29.0 Class:C03 Hdr:80
1680:29.1 Class:C03 Hdr:0
1690:29.2 Class:C03 Hdr:0
1700:29.7 Class:C03 Hdr:0
1710:30.0 Class:604 Hdr:1 Bridge 0->2..8
1720:31.0 Class:601 Hdr:80
1730:31.1 Class:101 Hdr:0
1740:31.3 Class:C05 Hdr:0
1750:31.5 Class:401 Hdr:0
1760:31.6 Class:703 Hdr:0
1771:0.0 Class:300 Hdr:0
1782:0.0 Class:607 Hdr:82 Bridge 2->3..5
1792:0.1 Class:607 Hdr:82 Bridge 2->6..8
1802:2.0 Class:200 Hdr:0
1812:8.0 Class:200 Hdr:0
182PCI Bus scan: 9 PCI buses found.
183Scan ACPI tree for PCI functions
1840:0.0 'PCI0' (F99F5E48)
1850:31.0 'LPC_' (F99F5E70)
1860:1.0 'AGP_' (F99FECE8)
1871:0.0 'VID_' (F99FF0A8)
1880:30.0 'PCI1' (F99FFCE0)
1892:0.0 'CBS0' (F99FFDA8)
1902:0.1 'CBS1' (F9A00090)
1912:3.0 'DOCK' (F9A00378)
1920:31.1 'IDE0' (F9A02CA8)
1930:29.0 'USB0' (F99E3F28)
1940:29.1 'USB1' (F99E4260)
1950:29.2 'USB2' (F99E4498)
1960:29.7 'USB7' (F99E44E8)
1970:31.6 'AC9M' (F99E4820)
198Bridges found:
1990:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F99F5E48) _PRT
2000:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F99FECE8) _PRT
2010:30.0 class:604 type: 1 Bus 0->2 ACPI: 'PCI1' (F99FFCE0) _PRT
2022:0.0 class:607 type: 2 Bus 2->3 ACPI: 'CBS0' (F99FFDA8)
2032:0.1 class:607 type: 2 Bus 2->6 ACPI: 'CBS1' (F9A00090)
204IRQLinks found:
205 Apic Set: 10 Apic Set: 10 Apic Set: 10 0: 'LNKA' (F99F4800) P[ 3, 4, 5, 6, 7, 9,*10, 11] <- 2:0.0 1:0.0 0:29.0
206 A[]
2071: 'LNKD' (F99F4ED8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1
208 A[]
2092: 'LNKC' (F99F4C90) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:2.0 0:31.1 0:29.2
210 A[]
211 Apic Set: 6 3: 'LNKH' (F99F57F8) P[ 3, 4, 5,*6, 7, 9, 10, 11] <- 0:29.7
212 A[]
2134: 'LNKB' (F99F4A48) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:0.1 0:31.6 0:31.5 0:31.3
214 A[]
2155: 'LNKE' (F99F5120) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 2:8.0
216 A[]
217PCI devices found:
2180:0.0 8086:3340 'PCI0'
2190:1.0 8086:3341 'AGP_'
2200:29.0 8086:24C2 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2210:29.1 8086:24C4 'USB1' IRQs: PCI:11 PIC:'LNKD':11 APIC:0
2220:29.2 8086:24C7 'USB2' IRQs: PCI:11 PIC:'LNKC':11 APIC:0
2230:29.7 8086:24CD 'USB7' IRQs: PCI:11 PIC:'LNKH':11 APIC:0
2240:30.0 8086:2448 'PCI1'
2250:31.0 8086:24CC 'LPC_'
2260:31.1 8086:24CA 'IDE0' IRQs: PCI:0 PIC:'LNKC':11 APIC:0
2270:31.3 8086:24C3 IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2280:31.5 8086:24C5 IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2290:31.6 8086:24C6 'AC9M' IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2301:0.0 1002:4C57 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2312:0.0 104C:AC55 'CBS0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0
2322:0.1 104C:AC55 'CBS1' IRQs: PCI:11 PIC:'LNKB':11 APIC:0
2332:2.0 168C:1014 IRQs: PCI:11 PIC:'LNKC':11 APIC:0
2342:8.0 8086:103D IRQs: PCI:11 PIC:'LNKE':11 APIC:0
235Bus detected - 8
236************ AcpiInstall Power Device Status = 0
237ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
238ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
239************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
240************ AcpiInstall PMTimer Device Status = 0
241** Total use:195808 unuse:13352 count:3884 **
242Get GpeHdl Status = 0 - AE_OK
243Event [_L18]
244Install GPE0x18 Status 0x0
245EndScan GPE Status 0
246===== Info ========
247Int Level 9
248In Xrupt F99D7550 in arg F99D7550
249 Node
250Name [_GPE]
251Flags: 0
252Reg count 4
253GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
254GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
255GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
256GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0
257GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
258GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
259GPE1 Status:1029 Enable:102D EnableWake:28 EnableRun:0 BaseGPENumber:8
260GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
261GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
262GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
263GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
264GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18
265=========== Status 0x0 0
266AcpiOsExecute type:1
267AcpiOsExecute - direct executing
268*** System Notify ***
269Dev: [DOCK] Value:0
270AcpiOsExecute type:1
271AcpiOsExecute - direct executing
272*** System Notify ***
273Dev: [FDD0] Value:1
274AcpiOsExecute type:1
275AcpiOsExecute - direct executing
276*** Device Notify ***
277Dev: [THM0] Value:80
278************ Leave Sleep Status = 0x0 - AE_OK
279APM: PSD find success. PSD Ftable:F9B501D0
280Register Notify 1st FD45A1CE
281APM: Found Smart Battery "BAT0"
282APM: Found Smart Battery "BAT1"
283APM: Unknown design capacity
284APM: Found AC "AC__"
285******** Event tread ***************
286APM: Unsetting suspend state
287******** Notify wait Counter 0 ***************
288******** Embedded wait Counter 0 ***************
289AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
290AcpiOsAcquireMutex Get H:F99F30F0 T:560006 Own:0 Cnt:0 P:0
291AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
292AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
293AcpiOsAcquireMutex Get H:F99F30F0 T:560006 Own:0 Cnt:0 P:0
294AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
295AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
296AcpiOsAcquireMutex Get H:F99F30F0 T:560006 Own:0 Cnt:0 P:0
297AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
298AcpiOsAcquireMutex Wait H:F99F30F0 T:560006 Own:30000A Cnt:1 P:0
299AcpiOsAcquireMutex Get H:F99F30F0 T:560006 Own:0 Cnt:0 P:0