Ticket #57: acpi-smp305.log

File acpi-smp305.log, 12.8 KB (added by Chuck McKinnis, 16 years ago)

Debug ACPICA$ with SMP kernel and /Q switch

Line 
1
2PSD_install options:" /Q" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 01:57:22
3MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
4New Stack = FFD00000 Size:0x8000
5PSD_INIT ESP=0xFFCFFFE0
6AcpiOsInitialize ALLOC size 65536 at 0xF9AB0000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
8AcpiOsCreateLock 8
9AcpiOsCreateLock 0
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsCreateSemaphore: O.K. Handle=0xF9AB03F8 M:1 I:0
15AcpiOsPredefinedOverride: "_OSI"
16AcpiOsPredefinedOverride: override to eCS
17*** AcpiInitializeSubsystem Status = 0 ***
18ACPI: RSDP @ 0xF8590/0x14 (v0 PTLTD )
19ACPI: RSDT @ 0x1FEF6B1F/0x30 (v1 Arima  161Fh    0x6040000  LTP 0x0)
20ACPI: FACP @ 0x1FEFAE66/0x74 (v1 Arima  161Fh    0x6040000 PTL_ 0xF4240)
21ACPI: DSDT @ 0x1FEF6B4F/0x4317 (v1 Arima 161Fh    0x6040000 MSFT 0x100000E)
22ACPI: FACS @ 0x1FEFBFC0/0x40
23ACPI: SSDT @ 0x1FEFAEDA/0xD6 (v1 PTLTD  POWERNOW 0x6040000  LTP 0x1)
24ACPI: APIC @ 0x1FEFAFB0/0x50 (v1 PTLTD   0x6040000  LTP 0x0)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFE81B4F New:FFCFFFAC SIG:[DSDT]
27tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired
28*** AcpiLoadTables Status = 0 ***
29Table [DSDT]
30Table [FACS]
31Table [FACP]
32Table [SSDT]
33Table [APIC]
34Local APIC address: FEE00000h
35System also has 8259
36APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
37APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: High 0 Trigger by: Edge
39APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
40Size of FACDT 244
41Type of computer - Unspecified
42System vector the SCI interrupt is wired to in 8259 mode. 10
43System port address of the SMI Command Port 0x402F
44The value to write to SMI_CMD to disable SMI   0xF0
45The value to write to SMI_CMD to re-enable SMI 0xF1
46The value to write to SMI_CMD to enter the S4BIOS state 0x0
47System port address of the PM1a Event Register Block 4000
48System port address of the PM1b Event Register Block 0
49Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
50System port address of the PM1a Control Register Block F510
51System port address of the PM1b Control Register Block 0
52Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
53System port address of the PM2 Control Register Block 0
54System port address of the Power Management Timer Control Register Block 4008
55Number of bytes decoded by PM_TMR_BLK (=4) 4
56System port address of General-Purpose Event 0 Register Block 4020
57System port address of General-Purpose Event 1 Register Block 0
58Number of bytes decoded by GPE0_BLK 0x4
59Number of bytes decoded by GPE1_BLK 0x0
60Offset within the ACPI general-purpose event model where GPE1 based events start 0
61GPE enable register: 0: 0
62GPE status register: 0: 0
63The worst-case hardware latency to enter and exit a C2 state 10 us
64The system does not support a C3 state 7D0
65The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0
66The RTC CMOS RAM index to the day-of-month alarm value 125
67The RTC CMOS RAM index to the month of year alarm value 126
68The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
69IA-PC Boot Architecture Flags 0x0
70Fixed feature flags A5
71The reset register:
72Type of address space - System Memory
73Register Bit Width  0
74Register Bit Offset 0
75Access size 0
76Address 0
77The value to write to the RESET_REG port to reset the system 0
78***** Throttl Width 0 Offset 0
79evxfevnt-176 [2] Enable: Transition to ACPI mode successful
80evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to F [_GPE] 2 regs on int 0xA
81AcpiOsInstallIntterrupHandler IRQA handler F9AFDC8D
82evgpeblk-1205 [3] EvInitializeGpeBlock: Found 7 Wake, Enabled 0 Runtime GPEs in this block
83************ AcpiEnableSubsystem Status = 0
84AcpiOsDerivePCIID([PCI0] ,[IRQR],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
85Device [EC__]
86 Set DATA to IO:[1 0x62 - 0x62 Al:1 Len:1]
87 Set Control to IO:[1 0x66 - 0x66 Al:1 Len:1]
88 Set Control to END_TAG Checksum:0
89GPE 1 EC
90Find 1 EC
91************ Scan EC Status = 1
92************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:FA001DD4 - AE_OK
93Install GPE Status 0
94GpeSetType Status = 0 - AE_OK
95EC[0] GPE1 GpeEnable Status = 0 - AE_OK
96Completing Region/Field/Buffer/Package initialization:.................................................
97Initialized 15/16 Regions 0/0 Fields 17/18 Buffers 17/27 Packages (495 nodes)
98Initializing Device/Processor/Thermal objects by executing _INI methods:AcpiOsDerivePCIID([PCI0] ,[CCRD],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
99ACPI Error (exfldio-288): Field [PMEN] Base+Offset+Width A4+0+4 is beyond end of region [CCRD] (length A7) [20070320]
100ACPI Error (psparse-626): Method parse/execution failed [\_SB_.PCI0.CRD0._INI] (Node F9AB6898), AE_AML_REGION_LIMIT
101ACPI Exception (nsinit-682): AE_AML_REGION_LIMIT, during \_SB_.PCI0.CRD0._INI._INI execution [20070320]
102.
103Executed 1 _INI methods requiring 1 _STA executions (examined 49 objects)
104************ AcpiInitializeObjects mask:0 Status = 0
105Processor [CPU0]
106Status 0x0 0
107************ AcpiInstallNotifyHandler System Status = 0
108************ AcpiInstallNotifyHandler Device Status = 0
109
110Init ACPI rc=0
111APIC0 phys FEC00000 lin: FFDED000 APIC ID 1000000 (178003) Ver 3 MaxIO entry 0x17 (1000000) Arbitration ID 1 set to (1000000) 1 Id  (1000000) 1
112Set 24 lines from IRQ0
113WakeupVector Lin: FFDEC000
114WakeupVector Lin: FFDEC000 Phys: 6E000 IPIStack:FFDEB000 s_cpu:FFDE3000
115GetWakeupVector Status = 0
116PIC Mask:FFFFDFFB
117ProcInit CPU0
118UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4
119OemHlpXHandler: ACPI.CFG opened: Size is 2064 bytes
120OemHlpXHandler: ACPI.CFG read: 2064 bytes
121OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD79C01C
122CFG: Link [LNKA] IRQ9
123CFG: Link [LNKB] IRQ11
124CFG: Link [LNKC] IRQ11
125CFG: Link [LNKD] IRQ9
126PSDFree: at 0xF9AC0000 success!
127Found bridge "PCI0" Addr:0x0 BBN is 0 Dev:0x0 Fun:0x0
128AcpiEcSetup handle F9AB6DD8 Function 0 Count 1
129AcpiWaitIBF timeout KEE 8 rc=640
130AcpiWaitOBF  timeout KEE 2 rc=640
131Finding:1 bridges
1320:0.0  Class:600  Hdr:0   Bridge H->0
1330:1.0  Class:604  Hdr:1   Bridge 0->1
1340:10.0  Class:607  Hdr:2   Bridge 0->129
1350:12.0  Class:280  Hdr:0
1360:16.0  Class:C03  Hdr:80
1370:16.1  Class:C03  Hdr:80
1380:16.2  Class:C03  Hdr:80
1390:16.3  Class:C03  Hdr:0
1400:17.0  Class:601  Hdr:80
1410:17.1  Class:101  Hdr:0
1420:17.5  Class:401  Hdr:0
1430:17.6  Class:780  Hdr:0
1440:18.0  Class:200  Hdr:0
1450:19.0  Class:C00  Hdr:0
1460:24.0  Class:600  Hdr:80   Bridge H->0
1470:24.1  Class:600  Hdr:80   Bridge H->0
1480:24.2  Class:600  Hdr:80   Bridge H->0
1490:24.3  Class:600  Hdr:80   Bridge H->0
1501:0.0  Class:300  Hdr:0
151PCI Bus scan: 130 PCI buses found.
152Scan ACPI tree for PCI functions
153AcpiOsDerivePCIID([PCI0] ,[NB00],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
1540:0.0  'PCI0' (F9AB1A38)
1550:17.0  'PIB_' (F9AB2638)
1560:17.1  'IDE_' (F9AB5308)
1570:16.0  'USB1' (F9AB5D80)
1580:16.1  'USB2' (F9AB5F18)
1590:16.2  'USB3' (F9AB60B0)
1600:16.3  'USB4' (F9AB6248)
1610:17.5  'Z007' (F9AB62F8)
1620:17.6  'Z00A' (F9AB6578)
1630:10.0  'CRD0' (F9AB6820)
1640:18.0  'NICD' (F9AB6D38)
1650:1.0  'AGP_' (F9AB6EA8)
1661:0.0  'VGA_' (F9AB6EF8)
167Bridges found:
1680:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9AB1A38) _PRT
1690:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGP_' (F9AB6EA8)
1700:10.0  class:607  type: 2  Bus 0->129  ACPI: 'CRD0' (F9AB6820)
171IRQLinks found:
172 Apic Set: 9  Apic Set: 9  Apic Set: 9  Apic Set: 9 0: 'LNKA' (F9AB3A20)  P[ 3, 4, 5, 7,*9, 12, 14, 15] <- 1:0.0 0:17.6 0:17.5 0:16.0
173                       A[]
174 Apic Set: 11  Apic Set: 11  Apic Set: 11 1: 'LNKB' (F9AB3C40)  P[ 3, 4, 5, 7, 10,*11, 12, 14, 15] <- 0:18.0 0:16.1 0:10.0
175                       A[]
176 Apic Set: 11  Apic Set: 11  Apic Set: 11 2: 'LNKC' (F9AB3E60)  P[ 3, 4, 5, 7, 11, 12, 14, 15] <- 0:17.1 0:16.2 0:12.0
177                       A[]
178 Apic Set: 9  Apic Set: 9 3: 'LNKD' (F9AB4080)  P[ 3, 4, 5, 7,*9, 10, 11, 12, 14, 15] <- 0:19.0 0:16.3
179                       A[]
1804: 'ALKA' (F9AB30E8)  P[]
181                       A[#16, 17, 18, 19, 20, 21, 22, 23] <- 0:17.1 0:16.2 0:12.0
1825: 'ALKB' (F9AB33C0)  P[]
183                       A[#23] <- 0:18.0 0:16.1 0:10.0
1846: 'ALKC' (F9AB35E0)  P[]
185                       A[#22] <- 0:17.6 0:17.5 0:16.0
1867: 'ALKD' (F9AB3800)  P[]
187                       A[#21] <- 0:16.3
188PCI devices found:
1890:0.0  1106:3188  'PCI0'
1900:1.0  1106:B188  'AGP_'
1910:10.0  1524:1410  'CRD0'  IRQs: PCI:0 PIC:'LNKB':11 APIC:17
1920:12.0  14E4:4320          IRQs: PCI:9 PIC:'LNKC': R 9 APIC:18
1930:16.0  1106:3038  'USB1'  IRQs: PCI:0 PIC:'LNKA':9 APIC:'ALKD':21
1940:16.1  1106:3038  'USB2'  IRQs: PCI:0 PIC:'LNKB':11 APIC:'ALKD':21
1950:16.2  1106:3038  'USB3'  IRQs: PCI:0 PIC:'LNKC':0 APIC:'ALKD':21
1960:16.3  1106:3104  'USB4'  IRQs: PCI:0 PIC:'LNKD':10 APIC:'ALKD':21
1970:17.0  1106:3177  'PIB_'
1980:17.1  1106:571  'IDE_'  IRQs: PCI:0 PIC:'LNKC':0 APIC:'ALKA':16
1990:17.5  1106:3059  'Z007'  IRQs: PCI:10 PIC:'LNKA':9 APIC:'ALKC':22
2000:17.6  1106:3068  'Z00A'  IRQs: PCI:10 PIC:'LNKA':9 APIC:'ALKC':22
2010:18.0  1106:3065  'NICD'  IRQs: PCI:9 PIC:'LNKB':11 APIC:'ALKB':23
2020:19.0  1106:3044          IRQs: PCI:10 PIC:'LNKD':10 APIC:19
2030:24.0  1022:1100       
2040:24.1  1022:1101       
2050:24.2  1022:1102       
2060:24.3  1022:1103       
2071:0.0  1002:4E50  'VGA_'  IRQs: PCI:9 PIC:'LNKA':9 APIC:16
208Bus detected - 129
209UNMASK PIC IRQ10 mask 0xFFFFDAFB Real:FFEBB8F4
210** Create resource, max = 31 **
211OemHlpXHandler: ACPI_START_EVENTS 3
212************ AcpiInstall Power Device Status = 0
213************ AcpiInstall Sleep Device Status = 0 - AE_OK
214************ AcpiInstall PMTimer Device Status = 0
215** Total use:110392 unuse:2656 count:1861 **
216Get GpeHdl Status = 0 - AE_OK
217Event [GPEF]
218Event [GUSB]
219Event [_L03]
220Install GPE0x3  Status 0x0
221Event [_L05]
222Install GPE0x5  Status 0x0
223Event [_L08]
224Install GPE0x8  Status 0x0
225Event [_L0E]
226Install GPE0xE  Status 0x0
227Event [_L0D]
228Install GPE0xD  Status 0x0
229EndScan GPE Status 0
230===== Info ========
231Int Level A
232In Xrupt F9ABD968 in arg F9ABD968
233      Node
234Name [_GPE]
235Flags: 0
236Reg count 2
237GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
238GPE0x2 Flag:0x2 Status - Set 0x0 Enable 0x0
239GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
240GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
241GPE0 Status:4020 Enable:4022 EnableWake:2C EnableRun:2 BaseGPENumber:0
242GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
243GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
244GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
245GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
246GPE1 Status:4021 Enable:4023 EnableWake:71 EnableRun:0 BaseGPENumber:8
247=========== Status 0x0 0
248************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
249OemHlpXHandler: ACPI_START_EVENTS 4
250OemHlpXHandler: CallACPI16: 47008DF, CallACPI32: F9AD5182, ExportTable32: FA0001CC
251UNMASK PIC IRQ1 mask 0xFFFFDAF9 Real:FFEBB8F4
252UNMASK PIC IRQ9 mask 0xFFFFD8F9 Real:FFEBB8F4
253UNMASK PIC IRQ11 mask 0xFFFFD2F9 Real:FFEBB8F4
254UNMASK PIC IRQ11 mask 0xFFFFD2F9 Real:FFEBB8F4
255UNMASK PIC IRQ9 mask 0xFFFFD8F9 Real:FFEBB8F4
256APM: PSD find success. PSD Ftable:FA0001D0
257Register Notify 1st FFCBE1CE
258UNMASK PIC IRQ6 mask 0xFFFFDAB9 Real:FFEBB8F4
259UNMASK PIC IRQ6 mask 0xFFFFDAB9 Real:FFEBB8F4
260FindPCIDevice
261 Need: B:0 D:11 F:1
262Finding APIC16 PIC0 Dev: [IDE_]
263UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4
264UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4
265UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4
266UNMASK PIC IRQ14 mask 0xFFFF9AF9 Real:FFEBB8F4
267UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4
268UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4
269UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4
270UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4
271UNMASK PIC IRQ14 mask 0xFFFF1AF9 Real:FFEBB8F4
272UNMASK PIC IRQ15 mask 0xFFFF1AF9 Real:FFEBB8F4
273UNMASK PIC IRQ12 mask 0xFFFF0AF9 Real:FFEBB8F4
274UNMASK PIC IRQ9 mask 0xFFFF08F9 Real:FFEBB8F4
275APM: Found AC "AC__"
276AcpiOsExecute type:1
277AcpiOsExecute - direct executing
278*** System Notify ***
279Dev: [AC__] Value:0
280Calling FFCBE1CE
281APM: ******** Notify: 0 *********
282APM: ******** End Notify: 0 *********
283APM: Found Smart Battery "BAT0"
284AcpiOsExecute type:1
285AcpiOsExecute - direct executing
286*** Device Notify ***
287Dev: [CPU0] Value:80
288CPU0 Status Evaluate _PCT 0x0 AE_OK
289 Perf control:  0x0
290 Perf status:  0x0
291Calling FFCBE1CE
292APM: ******** Notify: 80 *********
293APM: ******** End Notify: 80 *********
294UNMASK PIC IRQ9 mask 0xFFFF08F9 Real:FFEBB8F4
295UNMASK PIC IRQ11 mask 0xFFFF00F9 Real:FFEBB8F4
296UNMASK PIC IRQ11 mask 0xFFFF00F9 Real:FFEBB8F4
297UNMASK PIC IRQ9 mask 0xFFFF00F9 Real:FFEBB8F4
298OemHlpXHandler: CMD_INIT_COMPLETE
299PSD_SET_ADV_INT_MODE Apic 0 PIC 1
300UNMASK PIC IRQ0 mask 0xFFFF00F8 Real:FFEBB8F4
301UNMASK PIC IRQ11 mask 0xFFFF00F8 Real:FFEBB8F4
302UNMASK PIC IRQ11 mask 0xFFFF00F8 Real:FFEBB8F4
303******** Event tread ***************
304APM: Setting suspend state:3
305******** Notify wait Counter 0 ***************
306Button KernBlock 4294967295 timeout