Context Navigation

Back to Ticket #398

Ticket #398: acpica.4.log

File acpica.4.log, 169.8 KB (added by Lars Erdmann, 15 years ago)
acpi log file on use of acpi316full.zip

Line
1	08 Jul 23:31:38 acpica$ log is reading
2	--:--:-- KEE Version 0x10000
3	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
4	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
5	--:--:-- SS Selector fault
6	23:30:48 CFG: Link [LNKE] IRQ5
7	23:30:48 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
8	23:30:48 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
9	23:30:48 AcpiOsPredefinedOverride: "_REV"
10	23:30:48 AcpiOsPredefinedOverride: "_OS_"
11	23:30:48 AcpiOsPredefinedOverride: override to eComStation
12	23:30:48 AcpiOsPredefinedOverride: "_GL_"
13	23:30:48 AcpiOsPredefinedOverride: "_OSI"
14	23:30:48 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
15	23:30:48 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
16	23:30:48 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
17	23:30:48 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
18	23:30:48 ACPI: FACS @ 0x7FFF0000/0x40
19	23:30:48 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
20	23:30:48 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
21	23:30:48 Table [DSDT]
22	23:30:48 Table [FACS]
23	23:30:48 Table [FACP]
24	23:30:48 Table [APIC]
25	23:30:48 Local APIC address: FEE00000h
26	23:30:48 System also has 8259
27	23:30:48 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
28	23:30:48 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
29	23:30:48 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
30	23:30:48 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
31	23:30:48 Size of FACDT 244
32	23:30:48 Type of computer - Unspecified
33	23:30:48 System vector the SCI interrupt is wired to in 8259 mode. 9
34	23:30:48 System port address of the SMI Command Port 0x1048
35	23:30:48 The value to write to SMI_CMD to disable SMI 0x81
36	23:30:48 The value to write to SMI_CMD to re-enable SMI 0x80
37	23:30:48 The value to write to SMI_CMD to enter the S4BIOS state 0x0
38	23:30:48 System port address of the PM1a Event Register Block 1000
39	23:30:48 System port address of the PM1b Event Register Block 0
40	23:30:48 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
41	23:30:48 System port address of the PM1a Control Register Block 1004
42	23:30:48 System port address of the PM1b Control Register Block 0
43	23:30:48 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
44	23:30:48 System port address of the PM2 Control Register Block 1016
45	23:30:48 Number of bytes decoded by PM2_CNT_BLK 1
46	23:30:48 System port address of the Power Management Timer Control Register Block 1008
47	23:30:48 Number of bytes decoded by PM_TMR_BLK (=4) 4
48	23:30:48 System port address of General-Purpose Event 0 Register Block 1020
49	23:30:48 System port address of General-Purpose Event 1 Register Block 1030
50	23:30:48 Number of bytes decoded by GPE0_BLK 0x4
51	23:30:48 Number of bytes decoded by GPE1_BLK 0x4
52	23:30:48 Offset within the ACPI general-purpose event model where GPE1 based events start 10
53	23:30:48 The worst-case hardware latency to enter and exit a C2 state 90 us
54	23:30:48 The worst-case hardware latency to enter and exit a C3 state 900 us
55	23:30:48 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
56	23:30:48 The RTC CMOS RAM index to the day-of-month alarm value 126
57	23:30:48 The RTC CMOS RAM index to the month of year alarm value 127
58	23:30:48 IA-PC Boot Architecture Flags 0x0
59	23:30:48 Fixed feature flags 4A5
60	23:30:48 The reset register:
61	23:30:48 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
62	23:30:48 The value to write to the RESET_REG port to reset the system 0
63	23:30:48 ***** Throttl Width 0 Offset 1
64	23:30:48 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
65	23:30:49 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
66	23:30:49 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
67	23:30:49 ** Scan EC Status = 0 Find 0 EC
68	23:30:49 ** AcpiInitializeObjects mask:0 Status = 0
69	23:30:49 Processor [CPU0]
70	23:30:49 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
71	23:30:49 Status Evaluate Processor 0x0 AE_OK
72	23:30:49 Usable:1 Counter:0
73	23:30:49 CPU id to N:0
74	23:30:49 ProcId: 0x0
75	23:30:49 P_BLK: 0x0
76	23:30:49 P_BLK len: 0x0
77	23:30:49 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
78	23:30:49 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
79	23:30:49 Found bridge "PCI0" BBN is absent status:5
80	23:30:49 Finding:0 bridges
81	23:30:49 0:0.0 Class:600 Hdr:80 Bridge H->0
82	23:30:49 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
83	23:30:49 0:2.0 Class:601 Hdr:80
84	23:30:49 0:2.3 Class:C00 Hdr:0
85	23:30:49 0:2.5 Class:101 Hdr:0
86	23:30:49 0:2.7 Class:401 Hdr:0
87	23:30:49 0:3.0 Class:C03 Hdr:80
88	23:30:49 0:3.1 Class:C03 Hdr:0
89	23:30:49 0:3.2 Class:C03 Hdr:0
90	23:30:49 0:3.3 Class:C03 Hdr:0
91	23:30:49 0:4.0 Class:200 Hdr:0
92	23:30:49 0:8.0 Class:480 Hdr:0
93	23:30:49 0:10.0 Class:780 Hdr:0
94	23:30:49 1:0.0 Class:300 Hdr:0
95	23:30:49 PCI Bus scan: 2 PCI buses found.
96	23:30:49 Scan ACPI tree for PCI functions
97	23:30:49 0:0.0 'PCI0' (F96E5C20)
98	23:30:49 0:2.5 'IDEC' (F96E5CF8)
99	23:30:49 0:6.7 'PCI1' (F96E7630)
100	23:30:49 0:7.7 'PCI2' (F96E76A8)
101	23:30:49 0:8.7 'PCI3' (F96E7720)
102	23:30:49 0:10.7 'PCI4' (F96E7798)
103	23:30:49 0:2.0 'S962' (F96E7810)
104	23:30:49 0:3.0 'USB0' (F96E7E30)
105	23:30:49 0:3.1 'USB1' (F96E7EE0)
106	23:30:49 0:3.2 'USB2' (F96E7F90)
107	23:30:49 0:3.3 'USB3' (F96E8040)
108	23:30:49 0:4.0 'MAC0' (F96E80F0)
109	23:30:49 0:2.7 'AUD0' (F96E8140)
110	23:30:49 0:2.6 'AMR0' (F96E8190)
111	23:30:49 Bridges found:
112	23:30:49 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
113	23:30:49 0:1.0 class:604 type: 1 Bus 0->1
114	23:30:49 IRQLinks found:
115	23:30:49 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
116	23:30:49 A[]
117	23:30:49 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
118	23:30:49 A[]
119	23:30:49 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
120	23:30:49 A[]
121	23:30:49 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
122	23:30:49 A[]
123	23:30:49 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
124	23:30:49 A[]
125	23:30:49 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
126	23:30:49 A[]
127	23:30:49 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
128	23:30:49 A[]
129	23:30:49 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
130	23:30:49 A[]
131	23:30:49 PCI devices found:
132	23:30:49 0:0.0 1039:648 'PCI0'
133	23:30:49 0:1.0 1039:1
134	23:30:49 0:2.0 1039:8 'S962'
135	23:30:49 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
136	23:30:49 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
137	23:30:49 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
138	23:30:49 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
139	23:30:49 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
140	23:30:49 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
141	23:30:49 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
142	23:30:49 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
143	23:30:49 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
144	23:30:49 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
145	23:30:49 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
146	23:30:49 Bus detected - 1
147	23:30:49 ** AcpiInstall Power Device Status = 0
148	23:30:49 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
149	23:30:49 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
150	23:30:49 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
151	23:30:49 ** AcpiInstall PMTimer Device Status = 0
152	23:30:49 Total use:94208 unuse:9016 count:1573
153	23:30:49 Event [_L13] Install GPE0x13
154	23:30:49 Event [_L0E] Install GPE0xE
155	23:30:49 Event [_L04] Install GPE0x4
156	23:30:49 Event [_L07] Install GPE0x7
157	23:30:49 Event [_L06] Install GPE0x6
158	23:30:49 Event [_L05] Install GPE0x5
159	23:30:49 Event [_L08] Install GPE0x8
160	23:30:49 Event [_L0F] Install GPE0xF
161	23:30:49 Event [_L0D] Install GPE0xD
162	23:30:49 Event [_L0B] Install GPE0xB
163	23:30:49 Event [_L0C] Install GPE0xC
164	23:30:49 EndScan GPE Status 0
165	23:30:52 APM: PSD find success. PSD Ftable:F97402BC
166	23:30:52 APM:Max C state 0
167	23:30:52 Register Notify 1st FD05929D
168	23:30:55 FindPCIDevice
169	23:30:55 Need: B:0x0 D:0x2 F:0x5
170	23:30:55 Finding APIC0 PIC11 Dev: [IDEC]
171	23:31:26 Uniaud32: PSD find success. PSD Ftable:F97402BC
172	23:31:26 FindPCIDevice
173	23:31:26 Need: B:0x0 D:0x2 F:0x0
174	23:31:28 APM: End scan power object
175	23:31:31 ===== Info ========
176	23:31:31 Int Level 9
177	23:31:31 In Xrupt F96EFDB8 in arg F96EFDB8
178	23:31:31 Node
179	23:31:31 Name [_GPE]
180	23:31:31 Flags: 0x0
181	23:31:31 Reg count 2
182	23:31:31 GPE0x4 Type: Wake
183	23:31:31 GPE0x5 Type: Wake
184	23:31:31 GPE0x6 Type: Wake
185	23:31:31 GPE0x7 Type: Wake
186	23:31:31 GPE0x8 Type: Wake
187	23:31:31 GPE0xB Type: Wake
188	23:31:31 GPE0xC Type: Wake
189	23:31:31 GPE0xD Type: Wake
190	23:31:31 GPE0xE Type: Wake
191	23:31:31 GPE0xF Type: Wake
192	23:31:31 ===== Info ========
193	23:31:31 Int Level 9
194	23:31:31 In Xrupt F96EFDB8 in arg F96EFF30
195	23:31:31 Node
196	23:31:31 Name [_GPE]
197	23:31:31 Flags: 0x0
198	23:31:31 Reg count 2
199	23:31:31 GPE0x3 Type: Wake
200	23:31:38 Event tread
201	23:31:38 AllocateSuspendMemory s_cpu:0
202	23:31:38 Alloc s_cpu OK CPU0 2304 bytes at 26
203	23:31:38 AllocSuspend: CPU0 CR3:1FF000
204	23:31:38 Status 1Mb alloc 0
205	08 Jul 23:31:38 acpica$ log is reading
206	23:31:38 APM: Setting suspend state:3
207	23:31:38 APM:Max C state 2
208	09 Jul 00:29:59 acpica$ log is reading
209	--:--:-- KEE Version 0x10000
210	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
211	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
212	--:--:-- SS Selector fault
213	0:29:10 CFG: Link [LNKE] IRQ5
214	0:29:10 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
215	0:29:10 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
216	0:29:10 AcpiOsPredefinedOverride: "_REV"
217	0:29:10 AcpiOsPredefinedOverride: "_OS_"
218	0:29:10 AcpiOsPredefinedOverride: override to eComStation
219	0:29:10 AcpiOsPredefinedOverride: "_GL_"
220	0:29:10 AcpiOsPredefinedOverride: "_OSI"
221	0:29:10 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
222	0:29:10 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
223	0:29:10 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
224	0:29:10 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
225	0:29:10 ACPI: FACS @ 0x7FFF0000/0x40
226	0:29:10 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
227	0:29:10 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
228	0:29:10 Table [DSDT]
229	0:29:10 Table [FACS]
230	0:29:10 Table [FACP]
231	0:29:10 Table [APIC]
232	0:29:10 Local APIC address: FEE00000h
233	0:29:10 System also has 8259
234	0:29:10 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
235	0:29:10 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
236	0:29:10 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
237	0:29:10 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
238	0:29:10 Size of FACDT 244
239	0:29:10 Type of computer - Unspecified
240	0:29:10 System vector the SCI interrupt is wired to in 8259 mode. 9
241	0:29:10 System port address of the SMI Command Port 0x1048
242	0:29:10 The value to write to SMI_CMD to disable SMI 0x81
243	0:29:10 The value to write to SMI_CMD to re-enable SMI 0x80
244	0:29:10 The value to write to SMI_CMD to enter the S4BIOS state 0x0
245	0:29:10 System port address of the PM1a Event Register Block 1000
246	0:29:10 System port address of the PM1b Event Register Block 0
247	0:29:10 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
248	0:29:10 System port address of the PM1a Control Register Block 1004
249	0:29:10 System port address of the PM1b Control Register Block 0
250	0:29:10 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
251	0:29:10 System port address of the PM2 Control Register Block 1016
252	0:29:10 Number of bytes decoded by PM2_CNT_BLK 1
253	0:29:10 System port address of the Power Management Timer Control Register Block 1008
254	0:29:10 Number of bytes decoded by PM_TMR_BLK (=4) 4
255	0:29:10 System port address of General-Purpose Event 0 Register Block 1020
256	0:29:10 System port address of General-Purpose Event 1 Register Block 1030
257	0:29:10 Number of bytes decoded by GPE0_BLK 0x4
258	0:29:10 Number of bytes decoded by GPE1_BLK 0x4
259	0:29:10 Offset within the ACPI general-purpose event model where GPE1 based events start 10
260	0:29:10 The worst-case hardware latency to enter and exit a C2 state 90 us
261	0:29:10 The worst-case hardware latency to enter and exit a C3 state 900 us
262	0:29:10 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
263	0:29:10 The RTC CMOS RAM index to the day-of-month alarm value 126
264	0:29:10 The RTC CMOS RAM index to the month of year alarm value 127
265	0:29:10 IA-PC Boot Architecture Flags 0x0
266	0:29:10 Fixed feature flags 4A5
267	0:29:10 The reset register:
268	0:29:10 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
269	0:29:10 The value to write to the RESET_REG port to reset the system 0
270	0:29:10 ***** Throttl Width 0 Offset 1
271	0:29:10 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
272	0:29:10 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
273	0:29:10 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
274	0:29:10 ** Scan EC Status = 0 Find 0 EC
275	0:29:10 ** AcpiInitializeObjects mask:0 Status = 0
276	0:29:10 Processor [CPU0]
277	0:29:10 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
278	0:29:10 Status Evaluate Processor 0x0 AE_OK
279	0:29:10 Usable:1 Counter:0
280	0:29:10 CPU id to N:0
281	0:29:10 ProcId: 0x0
282	0:29:10 P_BLK: 0x0
283	0:29:10 P_BLK len: 0x0
284	0:29:10 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
285	0:29:10 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
286	0:29:10 Found bridge "PCI0" BBN is absent status:5
287	0:29:10 Finding:0 bridges
288	0:29:10 0:0.0 Class:600 Hdr:80 Bridge H->0
289	0:29:10 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
290	0:29:10 0:2.0 Class:601 Hdr:80
291	0:29:10 0:2.3 Class:C00 Hdr:0
292	0:29:10 0:2.5 Class:101 Hdr:0
293	0:29:10 0:2.7 Class:401 Hdr:0
294	0:29:10 0:3.0 Class:C03 Hdr:80
295	0:29:10 0:3.1 Class:C03 Hdr:0
296	0:29:10 0:3.2 Class:C03 Hdr:0
297	0:29:10 0:3.3 Class:C03 Hdr:0
298	0:29:10 0:4.0 Class:200 Hdr:0
299	0:29:10 0:8.0 Class:480 Hdr:0
300	0:29:10 0:10.0 Class:780 Hdr:0
301	0:29:10 1:0.0 Class:300 Hdr:0
302	0:29:10 PCI Bus scan: 2 PCI buses found.
303	0:29:10 Scan ACPI tree for PCI functions
304	0:29:10 0:0.0 'PCI0' (F96E5C20)
305	0:29:10 0:2.5 'IDEC' (F96E5CF8)
306	0:29:10 0:6.7 'PCI1' (F96E7630)
307	0:29:10 0:7.7 'PCI2' (F96E76A8)
308	0:29:10 0:8.7 'PCI3' (F96E7720)
309	0:29:10 0:10.7 'PCI4' (F96E7798)
310	0:29:10 0:2.0 'S962' (F96E7810)
311	0:29:10 0:3.0 'USB0' (F96E7E30)
312	0:29:10 0:3.1 'USB1' (F96E7EE0)
313	0:29:10 0:3.2 'USB2' (F96E7F90)
314	0:29:10 0:3.3 'USB3' (F96E8040)
315	0:29:10 0:4.0 'MAC0' (F96E80F0)
316	0:29:10 0:2.7 'AUD0' (F96E8140)
317	0:29:10 0:2.6 'AMR0' (F96E8190)
318	0:29:10 Bridges found:
319	0:29:10 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
320	0:29:10 0:1.0 class:604 type: 1 Bus 0->1
321	0:29:10 IRQLinks found:
322	0:29:10 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
323	0:29:10 A[]
324	0:29:10 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
325	0:29:10 A[]
326	0:29:10 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
327	0:29:10 A[]
328	0:29:10 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
329	0:29:10 A[]
330	0:29:10 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
331	0:29:10 A[]
332	0:29:10 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
333	0:29:10 A[]
334	0:29:10 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
335	0:29:10 A[]
336	0:29:10 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
337	0:29:10 A[]
338	0:29:10 PCI devices found:
339	0:29:10 0:0.0 1039:648 'PCI0'
340	0:29:10 0:1.0 1039:1
341	0:29:10 0:2.0 1039:8 'S962'
342	0:29:10 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
343	0:29:10 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
344	0:29:10 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
345	0:29:10 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
346	0:29:10 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
347	0:29:10 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
348	0:29:10 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
349	0:29:10 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
350	0:29:10 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
351	0:29:10 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
352	0:29:10 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
353	0:29:10 Bus detected - 1
354	0:29:10 ** AcpiInstall Power Device Status = 0
355	0:29:10 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
356	0:29:10 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
357	0:29:10 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
358	0:29:10 ** AcpiInstall PMTimer Device Status = 0
359	0:29:10 Total use:94208 unuse:9016 count:1573
360	0:29:10 Event [_L13] Install GPE0x13
361	0:29:10 Event [_L0E] Install GPE0xE
362	0:29:10 Event [_L04] Install GPE0x4
363	0:29:10 Event [_L07] Install GPE0x7
364	0:29:10 Event [_L06] Install GPE0x6
365	0:29:10 Event [_L05] Install GPE0x5
366	0:29:10 Event [_L08] Install GPE0x8
367	0:29:10 Event [_L0F] Install GPE0xF
368	0:29:10 Event [_L0D] Install GPE0xD
369	0:29:10 Event [_L0B] Install GPE0xB
370	0:29:10 Event [_L0C] Install GPE0xC
371	0:29:10 EndScan GPE Status 0
372	0:29:14 APM: PSD find success. PSD Ftable:F97402BC
373	0:29:14 APM:Max C state 0
374	0:29:14 Register Notify 1st FD05929D
375	0:29:16 FindPCIDevice
376	0:29:16 Need: B:0x0 D:0x2 F:0x5
377	0:29:16 Finding APIC0 PIC11 Dev: [IDEC]
378	0:29:47 Uniaud32: PSD find success. PSD Ftable:F97402BC
379	0:29:47 FindPCIDevice
380	0:29:47 Need: B:0x0 D:0x2 F:0x0
381	0:29:49 APM: End scan power object
382	0:29:52 ===== Info ========
383	0:29:52 Int Level 9
384	0:29:52 In Xrupt F96EFDB8 in arg F96EFDB8
385	0:29:52 Node
386	0:29:52 Name [_GPE]
387	0:29:52 Flags: 0x0
388	0:29:52 Reg count 2
389	0:29:52 GPE0x4 Type: Wake
390	0:29:52 GPE0x5 Type: Wake
391	0:29:52 GPE0x6 Type: Wake
392	0:29:52 GPE0x7 Type: Wake
393	0:29:52 GPE0x8 Type: Wake
394	0:29:52 GPE0xB Type: Wake
395	0:29:52 GPE0xC Type: Wake
396	0:29:52 GPE0xD Type: Wake
397	0:29:52 GPE0xE Type: Wake
398	0:29:52 GPE0xF Type: Wake
399	0:29:52 ===== Info ========
400	0:29:52 Int Level 9
401	0:29:52 In Xrupt F96EFDB8 in arg F96EFF30
402	0:29:52 Node
403	0:29:52 Name [_GPE]
404	0:29:52 Flags: 0x0
405	0:29:52 Reg count 2
406	0:29:52 GPE0x3 Type: Wake
407	0:29:59 Event tread
408	0:29:59 AllocateSuspendMemory s_cpu:0
409	0:29:59 Alloc s_cpu OK CPU0 2304 bytes at 3B
410	0:29:59 AllocSuspend: CPU0 CR3:1FF000
411	0:29:59 Status 1Mb alloc 0
412	09 Jul 00:29:59 acpica$ log is reading
413	0:29:59 APM: Setting suspend state:3
414	0:29:59 APM:Max C state 2
415	09 Jul 00:42:11 AcpiDaemon LID thread is starting ID 0x4
416	on 0x10000
417	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
418	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
419	--:--:-- SS Selector fault
420	0:41:24 CFG: Link [LNKE] IRQ5
421	0:41:24 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
422	0:41:24 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
423	0:41:24 AcpiOsPredefinedOverride: "_REV"
424	0:41:24 AcpiOsPredefinedOverride: "_OS_"
425	0:41:24 AcpiOsPredefinedOverride: override to eComStation
426	0:41:24 AcpiOsPredefinedOverride: "_GL_"
427	0:41:24 AcpiOsPredefinedOverride: "_OSI"
428	0:41:24 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
429	0:41:24 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
430	0:41:24 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
431	0:41:24 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
432	0:41:24 ACPI: FACS @ 0x7FFF0000/0x40
433	0:41:24 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
434	0:41:24 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
435	0:41:24 Table [DSDT]
436	0:41:24 Table [FACS]
437	0:41:24 Table [FACP]
438	0:41:24 Table [APIC]
439	0:41:24 Local APIC address: FEE00000h
440	0:41:24 System also has 8259
441	0:41:24 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
442	0:41:24 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
443	0:41:24 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
444	0:41:24 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
445	0:41:24 Size of FACDT 244
446	0:41:24 Type of computer - Unspecified
447	0:41:24 System vector the SCI interrupt is wired to in 8259 mode. 9
448	0:41:24 System port address of the SMI Command Port 0x1048
449	0:41:24 The value to write to SMI_CMD to disable SMI 0x81
450	0:41:24 The value to write to SMI_CMD to re-enable SMI 0x80
451	0:41:24 The value to write to SMI_CMD to enter the S4BIOS state 0x0
452	0:41:24 System port address of the PM1a Event Register Block 1000
453	0:41:24 System port address of the PM1b Event Register Block 0
454	0:41:24 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
455	0:41:24 System port address of the PM1a Control Register Block 1004
456	0:41:24 System port address of the PM1b Control Register Block 0
457	0:41:24 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
458	0:41:24 System port address of the PM2 Control Register Block 1016
459	0:41:24 Number of bytes decoded by PM2_CNT_BLK 1
460	0:41:24 System port address of the Power Management Timer Control Register Block 1008
461	0:41:24 Number of bytes decoded by PM_TMR_BLK (=4) 4
462	0:41:24 System port address of General-Purpose Event 0 Register Block 1020
463	0:41:24 System port address of General-Purpose Event 1 Register Block 1030
464	0:41:24 Number of bytes decoded by GPE0_BLK 0x4
465	0:41:24 Number of bytes decoded by GPE1_BLK 0x4
466	0:41:24 Offset within the ACPI general-purpose event model where GPE1 based events start 10
467	0:41:24 The worst-case hardware latency to enter and exit a C2 state 90 us
468	0:41:24 The worst-case hardware latency to enter and exit a C3 state 900 us
469	0:41:24 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
470	0:41:24 The RTC CMOS RAM index to the day-of-month alarm value 126
471	0:41:24 The RTC CMOS RAM index to the month of year alarm value 127
472	0:41:24 IA-PC Boot Architecture Flags 0x0
473	0:41:24 Fixed feature flags 4A5
474	0:41:24 The reset register:
475	0:41:24 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
476	0:41:24 The value to write to the RESET_REG port to reset the system 0
477	0:41:24 ***** Throttl Width 0 Offset 1
478	0:41:24 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
479	0:41:24 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
480	0:41:24 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
481	0:41:24 ** Scan EC Status = 0 Find 0 EC
482	0:41:24 ** AcpiInitializeObjects mask:0 Status = 0
483	0:41:24 Processor [CPU0]
484	0:41:24 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
485	0:41:24 Status Evaluate Processor 0x0 AE_OK
486	0:41:24 Usable:1 Counter:0
487	0:41:24 CPU id to N:0
488	0:41:24 ProcId: 0x0
489	0:41:24 P_BLK: 0x0
490	0:41:24 P_BLK len: 0x0
491	0:41:24 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
492	0:41:24 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
493	0:41:24 Found bridge "PCI0" BBN is absent status:5
494	0:41:24 Finding:0 bridges
495	0:41:24 0:0.0 Class:600 Hdr:80 Bridge H->0
496	0:41:24 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
497	0:41:24 0:2.0 Class:601 Hdr:80
498	0:41:24 0:2.3 Class:C00 Hdr:0
499	0:41:24 0:2.5 Class:101 Hdr:0
500	0:41:24 0:2.7 Class:401 Hdr:0
501	0:41:24 0:3.0 Class:C03 Hdr:80
502	0:41:24 0:3.1 Class:C03 Hdr:0
503	0:41:24 0:3.2 Class:C03 Hdr:0
504	0:41:24 0:3.3 Class:C03 Hdr:0
505	0:41:24 0:4.0 Class:200 Hdr:0
506	0:41:24 0:8.0 Class:480 Hdr:0
507	0:41:24 0:10.0 Class:780 Hdr:0
508	0:41:24 1:0.0 Class:300 Hdr:0
509	0:41:24 PCI Bus scan: 2 PCI buses found.
510	0:41:24 Scan ACPI tree for PCI functions
511	0:41:24 0:0.0 'PCI0' (F96E5C20)
512	0:41:24 0:2.5 'IDEC' (F96E5CF8)
513	0:41:24 0:6.7 'PCI1' (F96E7630)
514	0:41:24 0:7.7 'PCI2' (F96E76A8)
515	0:41:24 0:8.7 'PCI3' (F96E7720)
516	0:41:24 0:10.7 'PCI4' (F96E7798)
517	0:41:24 0:2.0 'S962' (F96E7810)
518	0:41:24 0:3.0 'USB0' (F96E7E30)
519	0:41:24 0:3.1 'USB1' (F96E7EE0)
520	0:41:24 0:3.2 'USB2' (F96E7F90)
521	0:41:24 0:3.3 'USB3' (F96E8040)
522	0:41:24 0:4.0 'MAC0' (F96E80F0)
523	0:41:24 0:2.7 'AUD0' (F96E8140)
524	0:41:24 0:2.6 'AMR0' (F96E8190)
525	0:41:24 Bridges found:
526	0:41:24 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
527	0:41:24 0:1.0 class:604 type: 1 Bus 0->1
528	0:41:24 IRQLinks found:
529	0:41:24 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
530	0:41:24 A[]
531	0:41:24 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
532	0:41:24 A[]
533	0:41:24 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
534	0:41:24 A[]
535	0:41:24 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
536	0:41:24 A[]
537	0:41:24 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
538	0:41:24 A[]
539	0:41:24 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
540	0:41:24 A[]
541	0:41:24 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
542	0:41:24 A[]
543	0:41:24 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
544	0:41:24 A[]
545	0:41:24 PCI devices found:
546	0:41:24 0:0.0 1039:648 'PCI0'
547	0:41:24 0:1.0 1039:1
548	0:41:24 0:2.0 1039:8 'S962'
549	0:41:24 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
550	0:41:24 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
551	0:41:24 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
552	0:41:24 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
553	0:41:24 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
554	0:41:24 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
555	0:41:24 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
556	0:41:24 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
557	0:41:24 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
558	0:41:24 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
559	0:41:24 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
560	0:41:24 Bus detected - 1
561	0:41:24 ** AcpiInstall Power Device Status = 0
562	0:41:24 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
563	0:41:24 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
564	0:41:24 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
565	0:41:24 ** AcpiInstall PMTimer Device Status = 0
566	0:41:24 Total use:94208 unuse:9016 count:1573
567	0:41:24 Event [_L13] Install GPE0x13
568	0:41:24 Event [_L0E] Install GPE0xE
569	0:41:24 Event [_L04] Install GPE0x4
570	0:41:24 Event [_L07] Install GPE0x7
571	0:41:24 Event [_L06] Install GPE0x6
572	0:41:24 Event [_L05] Install GPE0x5
573	0:41:24 Event [_L08] Install GPE0x8
574	0:41:24 Event [_L0F] Install GPE0xF
575	0:41:24 Event [_L0D] Install GPE0xD
576	0:41:24 Event [_L0B] Install GPE0xB
577	0:41:24 Event [_L0C] Install GPE0xC
578	0:41:24 EndScan GPE Status 0
579	0:41:27 APM: PSD find success. PSD Ftable:F97402BC
580	0:41:27 APM:Max C state 0
581	0:41:27 Register Notify 1st FD05929D
582	0:41:30 FindPCIDevice
583	0:41:30 Need: B:0x0 D:0x2 F:0x5
584	0:41:30 Finding APIC0 PIC11 Dev: [IDEC]
585	0:42:1 Uniaud32: PSD find success. PSD Ftable:F97402BC
586	0:42:1 FindPCIDevice
587	0:42:1 Need: B:0x0 D:0x2 F:0x0
588	0:42:2 APM: End scan power object
589	0:42:6 ===== Info ========
590	0:42:6 Int Level 9
591	0:42:6 In Xrupt F96EFDB8 in arg F96EFDB8
592	0:42:6 Node
593	0:42:6 Name [_GPE]
594	0:42:6 Flags: 0x0
595	0:42:6 Reg count 2
596	0:42:6 GPE0x4 Type: Wake
597	0:42:6 GPE0x5 Type: Wake
598	0:42:6 GPE0x6 Type: Wake
599	0:42:6 GPE0x7 Type: Wake
600	0:42:6 GPE0x8 Type: Wake
601	0:42:6 GPE0xB Type: Wake
602	0:42:6 GPE0xC Type: Wake
603	0:42:6 GPE0xD Type: Wake
604	0:42:6 GPE0xE Type: Wake
605	0:42:6 GPE0xF Type: Wake
606	0:42:6 ===== Info ========
607	0:42:6 Int Level 9
608	0:42:6 In Xrupt F96EFDB8 in arg F96EFF30
609	0:42:6 Node
610	0:42:6 Name [_GPE]
611	0:42:6 Flags: 0x0
612	0:42:6 Reg count 2
613	0:42:6 GPE0x3 Type: Wake
614	0:42:11 Event tread
615	0:42:11 AllocateSuspendMemory s_cpu:0
616	0:42:11 Alloc s_cpu OK CPU0 2304 bytes at B
617	0:42:11 AllocSuspend: CPU0 CR3:1FF000
618	0:42:11 Status 1Mb alloc 0
619	09 Jul 00:42:11 acpica$ log is reading
620	0:42:11 APM: Setting suspend state:3
621	0:42:11 APM:Max C state 2
622	09 Jul 20:15:38 acpica$ log is reading
623	--:--:-- KEE Version 0x10000
624	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
625	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
626	--:--:-- SS Selector fault
627	20:14:51 CFG: Link [LNKE] IRQ5
628	20:14:51 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
629	20:14:51 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
630	20:14:51 AcpiOsPredefinedOverride: "_REV"
631	20:14:51 AcpiOsPredefinedOverride: "_OS_"
632	20:14:51 AcpiOsPredefinedOverride: override to eComStation
633	20:14:51 AcpiOsPredefinedOverride: "_GL_"
634	20:14:51 AcpiOsPredefinedOverride: "_OSI"
635	20:14:51 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
636	20:14:51 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
637	20:14:51 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
638	20:14:51 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
639	20:14:51 ACPI: FACS @ 0x7FFF0000/0x40
640	20:14:51 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
641	20:14:51 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
642	20:14:51 Table [DSDT]
643	20:14:51 Table [FACS]
644	20:14:51 Table [FACP]
645	20:14:51 Table [APIC]
646	20:14:51 Local APIC address: FEE00000h
647	20:14:51 System also has 8259
648	20:14:51 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
649	20:14:51 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
650	20:14:51 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
651	20:14:51 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
652	20:14:51 Size of FACDT 244
653	20:14:51 Type of computer - Unspecified
654	20:14:51 System vector the SCI interrupt is wired to in 8259 mode. 9
655	20:14:51 System port address of the SMI Command Port 0x1048
656	20:14:51 The value to write to SMI_CMD to disable SMI 0x81
657	20:14:51 The value to write to SMI_CMD to re-enable SMI 0x80
658	20:14:51 The value to write to SMI_CMD to enter the S4BIOS state 0x0
659	20:14:51 System port address of the PM1a Event Register Block 1000
660	20:14:51 System port address of the PM1b Event Register Block 0
661	20:14:51 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
662	20:14:51 System port address of the PM1a Control Register Block 1004
663	20:14:51 System port address of the PM1b Control Register Block 0
664	20:14:51 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
665	20:14:51 System port address of the PM2 Control Register Block 1016
666	20:14:51 Number of bytes decoded by PM2_CNT_BLK 1
667	20:14:51 System port address of the Power Management Timer Control Register Block 1008
668	20:14:51 Number of bytes decoded by PM_TMR_BLK (=4) 4
669	20:14:51 System port address of General-Purpose Event 0 Register Block 1020
670	20:14:51 System port address of General-Purpose Event 1 Register Block 1030
671	20:14:51 Number of bytes decoded by GPE0_BLK 0x4
672	20:14:51 Number of bytes decoded by GPE1_BLK 0x4
673	20:14:51 Offset within the ACPI general-purpose event model where GPE1 based events start 10
674	20:14:51 The worst-case hardware latency to enter and exit a C2 state 90 us
675	20:14:51 The worst-case hardware latency to enter and exit a C3 state 900 us
676	20:14:51 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
677	20:14:51 The RTC CMOS RAM index to the day-of-month alarm value 126
678	20:14:51 The RTC CMOS RAM index to the month of year alarm value 127
679	20:14:51 IA-PC Boot Architecture Flags 0x0
680	20:14:51 Fixed feature flags 4A5
681	20:14:51 The reset register:
682	20:14:51 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
683	20:14:51 The value to write to the RESET_REG port to reset the system 0
684	20:14:51 ***** Throttl Width 0 Offset 1
685	20:14:51 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
686	20:14:51 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
687	20:14:51 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
688	20:14:51 ** Scan EC Status = 0 Find 0 EC
689	20:14:51 ** AcpiInitializeObjects mask:0 Status = 0
690	20:14:51 Processor [CPU0]
691	20:14:51 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
692	20:14:51 Status Evaluate Processor 0x0 AE_OK
693	20:14:51 Usable:1 Counter:0
694	20:14:51 CPU id to N:0
695	20:14:51 ProcId: 0x0
696	20:14:51 P_BLK: 0x0
697	20:14:51 P_BLK len: 0x0
698	20:14:51 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
699	20:14:51 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
700	20:14:51 Found bridge "PCI0" BBN is absent status:5
701	20:14:51 Finding:0 bridges
702	20:14:51 0:0.0 Class:600 Hdr:80 Bridge H->0
703	20:14:51 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
704	20:14:51 0:2.0 Class:601 Hdr:80
705	20:14:51 0:2.3 Class:C00 Hdr:0
706	20:14:51 0:2.5 Class:101 Hdr:0
707	20:14:51 0:2.7 Class:401 Hdr:0
708	20:14:51 0:3.0 Class:C03 Hdr:80
709	20:14:51 0:3.1 Class:C03 Hdr:0
710	20:14:51 0:3.2 Class:C03 Hdr:0
711	20:14:51 0:3.3 Class:C03 Hdr:0
712	20:14:51 0:4.0 Class:200 Hdr:0
713	20:14:51 0:8.0 Class:480 Hdr:0
714	20:14:51 0:10.0 Class:780 Hdr:0
715	20:14:51 1:0.0 Class:300 Hdr:0
716	20:14:51 PCI Bus scan: 2 PCI buses found.
717	20:14:51 Scan ACPI tree for PCI functions
718	20:14:51 0:0.0 'PCI0' (F96E5C20)
719	20:14:51 0:2.5 'IDEC' (F96E5CF8)
720	20:14:51 0:6.7 'PCI1' (F96E7630)
721	20:14:51 0:7.7 'PCI2' (F96E76A8)
722	20:14:51 0:8.7 'PCI3' (F96E7720)
723	20:14:51 0:10.7 'PCI4' (F96E7798)
724	20:14:51 0:2.0 'S962' (F96E7810)
725	20:14:51 0:3.0 'USB0' (F96E7E30)
726	20:14:51 0:3.1 'USB1' (F96E7EE0)
727	20:14:51 0:3.2 'USB2' (F96E7F90)
728	20:14:51 0:3.3 'USB3' (F96E8040)
729	20:14:51 0:4.0 'MAC0' (F96E80F0)
730	20:14:51 0:2.7 'AUD0' (F96E8140)
731	20:14:51 0:2.6 'AMR0' (F96E8190)
732	20:14:51 Bridges found:
733	20:14:51 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
734	20:14:51 0:1.0 class:604 type: 1 Bus 0->1
735	20:14:51 IRQLinks found:
736	20:14:51 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
737	20:14:51 A[]
738	20:14:51 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
739	20:14:51 A[]
740	20:14:51 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
741	20:14:51 A[]
742	20:14:51 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
743	20:14:51 A[]
744	20:14:51 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
745	20:14:51 A[]
746	20:14:51 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
747	20:14:51 A[]
748	20:14:51 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
749	20:14:51 A[]
750	20:14:51 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
751	20:14:51 A[]
752	20:14:51 PCI devices found:
753	20:14:51 0:0.0 1039:648 'PCI0'
754	20:14:51 0:1.0 1039:1
755	20:14:51 0:2.0 1039:8 'S962'
756	20:14:51 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
757	20:14:51 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
758	20:14:51 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
759	20:14:51 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
760	20:14:51 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
761	20:14:51 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
762	20:14:51 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
763	20:14:51 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
764	20:14:51 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
765	20:14:51 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
766	20:14:51 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
767	20:14:51 Bus detected - 1
768	20:14:51 ** AcpiInstall Power Device Status = 0
769	20:14:51 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
770	20:14:51 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
771	20:14:51 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
772	20:14:51 ** AcpiInstall PMTimer Device Status = 0
773	20:14:51 Total use:94208 unuse:9016 count:1573
774	20:14:51 Event [_L13] Install GPE0x13
775	20:14:51 Event [_L0E] Install GPE0xE
776	20:14:51 Event [_L04] Install GPE0x4
777	20:14:51 Event [_L07] Install GPE0x7
778	20:14:51 Event [_L06] Install GPE0x6
779	20:14:51 Event [_L05] Install GPE0x5
780	20:14:51 Event [_L08] Install GPE0x8
781	20:14:51 Event [_L0F] Install GPE0xF
782	20:14:51 Event [_L0D] Install GPE0xD
783	20:14:51 Event [_L0B] Install GPE0xB
784	20:14:51 Event [_L0C] Install GPE0xC
785	20:14:51 EndScan GPE Status 0
786	20:14:55 APM: PSD find success. PSD Ftable:F97402BC
787	20:14:55 APM:Max C state 0
788	20:14:55 Register Notify 1st FD05929D
789	20:14:57 FindPCIDevice
790	20:14:57 Need: B:0x0 D:0x2 F:0x5
791	20:14:57 Finding APIC0 PIC11 Dev: [IDEC]
792	20:15:28 Uniaud32: PSD find success. PSD Ftable:F97402BC
793	20:15:28 FindPCIDevice
794	20:15:28 Need: B:0x0 D:0x2 F:0x0
795	20:15:30 APM: End scan power object
796	20:15:33 ===== Info ========
797	20:15:33 Int Level 9
798	20:15:33 In Xrupt F96EFDB8 in arg F96EFDB8
799	20:15:33 Node
800	20:15:33 Name [_GPE]
801	20:15:33 Flags: 0x0
802	20:15:33 Reg count 2
803	20:15:33 GPE0x4 Type: Wake
804	20:15:33 GPE0x5 Type: Wake
805	20:15:33 GPE0x6 Type: Wake
806	20:15:33 GPE0x7 Type: Wake
807	20:15:33 GPE0x8 Type: Wake
808	20:15:33 GPE0xB Type: Wake
809	20:15:33 GPE0xC Type: Wake
810	20:15:33 GPE0xD Type: Wake
811	20:15:33 GPE0xE Type: Wake
812	20:15:33 GPE0xF Type: Wake
813	20:15:33 ===== Info ========
814	20:15:33 Int Level 9
815	20:15:33 In Xrupt F96EFDB8 in arg F96EFF30
816	20:15:33 Node
817	20:15:33 Name [_GPE]
818	20:15:33 Flags: 0x0
819	20:15:33 Reg count 2
820	20:15:33 GPE0x3 Type: Wake
821	20:15:38 Event tread
822	20:15:38 AllocateSuspendMemory s_cpu:0
823	20:15:38 Alloc s_cpu OK CPU0 2304 bytes at 26
824	20:15:38 AllocSuspend: CPU0 CR3:1FF000
825	20:15:38 Status 1Mb alloc 0
826	09 Jul 20:15:39 acpica$ log is reading
827	20:15:39 APM: Setting suspend state:3
828	20:15:39 APM:Max C state 2
829	10 Jul 00:41:26 acpica$ log is reading
830	--:--:-- KEE Version 0x10000
831	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
832	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
833	--:--:-- SS Selector fault
834	0:40:36 CFG: Link [LNKE] IRQ5
835	0:40:36 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
836	0:40:36 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
837	0:40:36 AcpiOsPredefinedOverride: "_REV"
838	0:40:36 AcpiOsPredefinedOverride: "_OS_"
839	0:40:36 AcpiOsPredefinedOverride: override to eComStation
840	0:40:36 AcpiOsPredefinedOverride: "_GL_"
841	0:40:36 AcpiOsPredefinedOverride: "_OSI"
842	0:40:36 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
843	0:40:36 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
844	0:40:36 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
845	0:40:36 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
846	0:40:36 ACPI: FACS @ 0x7FFF0000/0x40
847	0:40:36 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
848	0:40:36 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
849	0:40:36 Table [DSDT]
850	0:40:36 Table [FACS]
851	0:40:36 Table [FACP]
852	0:40:36 Table [APIC]
853	0:40:36 Local APIC address: FEE00000h
854	0:40:36 System also has 8259
855	0:40:36 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
856	0:40:36 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
857	0:40:36 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
858	0:40:36 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
859	0:40:36 Size of FACDT 244
860	0:40:36 Type of computer - Unspecified
861	0:40:36 System vector the SCI interrupt is wired to in 8259 mode. 9
862	0:40:36 System port address of the SMI Command Port 0x1048
863	0:40:36 The value to write to SMI_CMD to disable SMI 0x81
864	0:40:36 The value to write to SMI_CMD to re-enable SMI 0x80
865	0:40:36 The value to write to SMI_CMD to enter the S4BIOS state 0x0
866	0:40:36 System port address of the PM1a Event Register Block 1000
867	0:40:36 System port address of the PM1b Event Register Block 0
868	0:40:36 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
869	0:40:36 System port address of the PM1a Control Register Block 1004
870	0:40:36 System port address of the PM1b Control Register Block 0
871	0:40:36 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
872	0:40:36 System port address of the PM2 Control Register Block 1016
873	0:40:36 Number of bytes decoded by PM2_CNT_BLK 1
874	0:40:36 System port address of the Power Management Timer Control Register Block 1008
875	0:40:36 Number of bytes decoded by PM_TMR_BLK (=4) 4
876	0:40:36 System port address of General-Purpose Event 0 Register Block 1020
877	0:40:36 System port address of General-Purpose Event 1 Register Block 1030
878	0:40:36 Number of bytes decoded by GPE0_BLK 0x4
879	0:40:36 Number of bytes decoded by GPE1_BLK 0x4
880	0:40:36 Offset within the ACPI general-purpose event model where GPE1 based events start 10
881	0:40:36 The worst-case hardware latency to enter and exit a C2 state 90 us
882	0:40:36 The worst-case hardware latency to enter and exit a C3 state 900 us
883	0:40:36 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
884	0:40:36 The RTC CMOS RAM index to the day-of-month alarm value 126
885	0:40:36 The RTC CMOS RAM index to the month of year alarm value 127
886	0:40:36 IA-PC Boot Architecture Flags 0x0
887	0:40:36 Fixed feature flags 4A5
888	0:40:36 The reset register:
889	0:40:36 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
890	0:40:36 The value to write to the RESET_REG port to reset the system 0
891	0:40:36 ***** Throttl Width 0 Offset 1
892	0:40:36 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
893	0:40:36 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
894	0:40:36 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
895	0:40:36 ** Scan EC Status = 0 Find 0 EC
896	0:40:36 ** AcpiInitializeObjects mask:0 Status = 0
897	0:40:36 Processor [CPU0]
898	0:40:36 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
899	0:40:36 Status Evaluate Processor 0x0 AE_OK
900	0:40:36 Usable:1 Counter:0
901	0:40:36 CPU id to N:0
902	0:40:36 ProcId: 0x0
903	0:40:36 P_BLK: 0x0
904	0:40:36 P_BLK len: 0x0
905	0:40:36 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
906	0:40:36 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
907	0:40:36 Found bridge "PCI0" BBN is absent status:5
908	0:40:36 Finding:0 bridges
909	0:40:36 0:0.0 Class:600 Hdr:80 Bridge H->0
910	0:40:36 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
911	0:40:36 0:2.0 Class:601 Hdr:80
912	0:40:36 0:2.3 Class:C00 Hdr:0
913	0:40:36 0:2.5 Class:101 Hdr:0
914	0:40:36 0:2.7 Class:401 Hdr:0
915	0:40:36 0:3.0 Class:C03 Hdr:80
916	0:40:36 0:3.1 Class:C03 Hdr:0
917	0:40:36 0:3.2 Class:C03 Hdr:0
918	0:40:36 0:3.3 Class:C03 Hdr:0
919	0:40:36 0:4.0 Class:200 Hdr:0
920	0:40:36 0:8.0 Class:480 Hdr:0
921	0:40:36 0:10.0 Class:780 Hdr:0
922	0:40:36 1:0.0 Class:300 Hdr:0
923	0:40:36 PCI Bus scan: 2 PCI buses found.
924	0:40:36 Scan ACPI tree for PCI functions
925	0:40:36 0:0.0 'PCI0' (F96E5C20)
926	0:40:36 0:2.5 'IDEC' (F96E5CF8)
927	0:40:36 0:6.7 'PCI1' (F96E7630)
928	0:40:36 0:7.7 'PCI2' (F96E76A8)
929	0:40:36 0:8.7 'PCI3' (F96E7720)
930	0:40:36 0:10.7 'PCI4' (F96E7798)
931	0:40:36 0:2.0 'S962' (F96E7810)
932	0:40:36 0:3.0 'USB0' (F96E7E30)
933	0:40:36 0:3.1 'USB1' (F96E7EE0)
934	0:40:36 0:3.2 'USB2' (F96E7F90)
935	0:40:36 0:3.3 'USB3' (F96E8040)
936	0:40:36 0:4.0 'MAC0' (F96E80F0)
937	0:40:36 0:2.7 'AUD0' (F96E8140)
938	0:40:36 0:2.6 'AMR0' (F96E8190)
939	0:40:36 Bridges found:
940	0:40:36 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
941	0:40:36 0:1.0 class:604 type: 1 Bus 0->1
942	0:40:36 IRQLinks found:
943	0:40:36 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
944	0:40:36 A[]
945	0:40:36 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
946	0:40:36 A[]
947	0:40:36 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
948	0:40:36 A[]
949	0:40:36 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
950	0:40:36 A[]
951	0:40:36 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
952	0:40:36 A[]
953	0:40:36 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
954	0:40:36 A[]
955	0:40:36 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
956	0:40:36 A[]
957	0:40:36 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
958	0:40:36 A[]
959	0:40:36 PCI devices found:
960	0:40:36 0:0.0 1039:648 'PCI0'
961	0:40:36 0:1.0 1039:1
962	0:40:36 0:2.0 1039:8 'S962'
963	0:40:36 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
964	0:40:36 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
965	0:40:36 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
966	0:40:36 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
967	0:40:36 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
968	0:40:36 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
969	0:40:36 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
970	0:40:36 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
971	0:40:36 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
972	0:40:36 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
973	0:40:36 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
974	0:40:36 Bus detected - 1
975	0:40:36 ** AcpiInstall Power Device Status = 0
976	0:40:36 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
977	0:40:36 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
978	0:40:36 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
979	0:40:36 ** AcpiInstall PMTimer Device Status = 0
980	0:40:36 Total use:94208 unuse:9016 count:1573
981	0:40:36 Event [_L13] Install GPE0x13
982	0:40:36 Event [_L0E] Install GPE0xE
983	0:40:36 Event [_L04] Install GPE0x4
984	0:40:36 Event [_L07] Install GPE0x7
985	0:40:36 Event [_L06] Install GPE0x6
986	0:40:36 Event [_L05] Install GPE0x5
987	0:40:36 Event [_L08] Install GPE0x8
988	0:40:36 Event [_L0F] Install GPE0xF
989	0:40:36 Event [_L0D] Install GPE0xD
990	0:40:36 Event [_L0B] Install GPE0xB
991	0:40:36 Event [_L0C] Install GPE0xC
992	0:40:36 EndScan GPE Status 0
993	0:40:40 APM: PSD find success. PSD Ftable:F97402BC
994	0:40:40 APM:Max C state 0
995	0:40:40 Register Notify 1st FD05929D
996	0:40:43 FindPCIDevice
997	0:40:43 Need: B:0x0 D:0x2 F:0x5
998	0:40:43 Finding APIC0 PIC11 Dev: [IDEC]
999	0:41:13 Uniaud32: PSD find success. PSD Ftable:F97402BC
1000	0:41:13 FindPCIDevice
1001	0:41:13 Need: B:0x0 D:0x2 F:0x0
1002	0:41:15 APM: End scan power object
1003	0:41:19 ===== Info ========
1004	0:41:19 Int Level 9
1005	0:41:19 In Xrupt F96EFDB8 in arg F96EFDB8
1006	0:41:19 Node
1007	0:41:19 Name [_GPE]
1008	0:41:19 Flags: 0x0
1009	0:41:19 Reg count 2
1010	0:41:19 GPE0x4 Type: Wake
1011	0:41:19 GPE0x5 Type: Wake
1012	0:41:19 GPE0x6 Type: Wake
1013	0:41:19 GPE0x7 Type: Wake
1014	0:41:19 GPE0x8 Type: Wake
1015	0:41:19 GPE0xB Type: Wake
1016	0:41:19 GPE0xC Type: Wake
1017	0:41:19 GPE0xD Type: Wake
1018	0:41:19 GPE0xE Type: Wake
1019	0:41:19 GPE0xF Type: Wake
1020	0:41:19 ===== Info ========
1021	0:41:19 Int Level 9
1022	0:41:19 In Xrupt F96EFDB8 in arg F96EFF30
1023	0:41:19 Node
1024	0:41:19 Name [_GPE]
1025	0:41:19 Flags: 0x0
1026	0:41:19 Reg count 2
1027	0:41:19 GPE0x3 Type: Wake
1028	0:41:26 Event tread
1029	0:41:26 AllocateSuspendMemory s_cpu:0
1030	0:41:26 Alloc s_cpu OK CPU0 2304 bytes at 1A
1031	0:41:26 AllocSuspend: CPU0 CR3:1FF000
1032	0:41:26 Status 1Mb alloc 0
1033	10 Jul 00:41:26 acpica$ log is reading
1034	0:41:26 APM: Setting suspend state:3
1035	0:41:26 APM:Max C state 2
1036	10 Jul 00:45:44 acpica$ log is reading
1037	--:--:-- KEE Version 0x10000
1038	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
1039	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
1040	--:--:-- SS Selector fault
1041	0:44:55 CFG: Link [LNKE] IRQ5
1042	0:44:55 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
1043	0:44:55 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1044	0:44:55 AcpiOsPredefinedOverride: "_REV"
1045	0:44:55 AcpiOsPredefinedOverride: "_OS_"
1046	0:44:55 AcpiOsPredefinedOverride: override to eComStation
1047	0:44:55 AcpiOsPredefinedOverride: "_GL_"
1048	0:44:55 AcpiOsPredefinedOverride: "_OSI"
1049	0:44:55 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1050	0:44:55 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1051	0:44:55 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1052	0:44:55 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1053	0:44:55 ACPI: FACS @ 0x7FFF0000/0x40
1054	0:44:55 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1055	0:44:55 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
1056	0:44:55 Table [DSDT]
1057	0:44:55 Table [FACS]
1058	0:44:55 Table [FACP]
1059	0:44:55 Table [APIC]
1060	0:44:55 Local APIC address: FEE00000h
1061	0:44:55 System also has 8259
1062	0:44:55 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1063	0:44:55 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1064	0:44:55 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1065	0:44:55 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1066	0:44:55 Size of FACDT 244
1067	0:44:55 Type of computer - Unspecified
1068	0:44:55 System vector the SCI interrupt is wired to in 8259 mode. 9
1069	0:44:55 System port address of the SMI Command Port 0x1048
1070	0:44:55 The value to write to SMI_CMD to disable SMI 0x81
1071	0:44:55 The value to write to SMI_CMD to re-enable SMI 0x80
1072	0:44:55 The value to write to SMI_CMD to enter the S4BIOS state 0x0
1073	0:44:55 System port address of the PM1a Event Register Block 1000
1074	0:44:55 System port address of the PM1b Event Register Block 0
1075	0:44:55 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1076	0:44:55 System port address of the PM1a Control Register Block 1004
1077	0:44:55 System port address of the PM1b Control Register Block 0
1078	0:44:55 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1079	0:44:55 System port address of the PM2 Control Register Block 1016
1080	0:44:55 Number of bytes decoded by PM2_CNT_BLK 1
1081	0:44:55 System port address of the Power Management Timer Control Register Block 1008
1082	0:44:55 Number of bytes decoded by PM_TMR_BLK (=4) 4
1083	0:44:55 System port address of General-Purpose Event 0 Register Block 1020
1084	0:44:55 System port address of General-Purpose Event 1 Register Block 1030
1085	0:44:55 Number of bytes decoded by GPE0_BLK 0x4
1086	0:44:55 Number of bytes decoded by GPE1_BLK 0x4
1087	0:44:55 Offset within the ACPI general-purpose event model where GPE1 based events start 10
1088	0:44:55 The worst-case hardware latency to enter and exit a C2 state 90 us
1089	0:44:55 The worst-case hardware latency to enter and exit a C3 state 900 us
1090	0:44:55 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1091	0:44:55 The RTC CMOS RAM index to the day-of-month alarm value 126
1092	0:44:55 The RTC CMOS RAM index to the month of year alarm value 127
1093	0:44:55 IA-PC Boot Architecture Flags 0x0
1094	0:44:55 Fixed feature flags 4A5
1095	0:44:55 The reset register:
1096	0:44:55 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
1097	0:44:55 The value to write to the RESET_REG port to reset the system 0
1098	0:44:55 ***** Throttl Width 0 Offset 1
1099	0:44:55 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
1100	0:44:55 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1101	0:44:55 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1102	0:44:55 ** Scan EC Status = 0 Find 0 EC
1103	0:44:55 ** AcpiInitializeObjects mask:0 Status = 0
1104	0:44:55 Processor [CPU0]
1105	0:44:55 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1106	0:44:55 Status Evaluate Processor 0x0 AE_OK
1107	0:44:55 Usable:1 Counter:0
1108	0:44:55 CPU id to N:0
1109	0:44:55 ProcId: 0x0
1110	0:44:55 P_BLK: 0x0
1111	0:44:55 P_BLK len: 0x0
1112	0:44:55 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1113	0:44:55 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1114	0:44:55 Found bridge "PCI0" BBN is absent status:5
1115	0:44:55 Finding:0 bridges
1116	0:44:55 0:0.0 Class:600 Hdr:80 Bridge H->0
1117	0:44:55 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1118	0:44:55 0:2.0 Class:601 Hdr:80
1119	0:44:55 0:2.3 Class:C00 Hdr:0
1120	0:44:55 0:2.5 Class:101 Hdr:0
1121	0:44:55 0:2.7 Class:401 Hdr:0
1122	0:44:55 0:3.0 Class:C03 Hdr:80
1123	0:44:55 0:3.1 Class:C03 Hdr:0
1124	0:44:55 0:3.2 Class:C03 Hdr:0
1125	0:44:55 0:3.3 Class:C03 Hdr:0
1126	0:44:55 0:4.0 Class:200 Hdr:0
1127	0:44:55 0:8.0 Class:480 Hdr:0
1128	0:44:55 0:10.0 Class:780 Hdr:0
1129	0:44:55 1:0.0 Class:300 Hdr:0
1130	0:44:55 PCI Bus scan: 2 PCI buses found.
1131	0:44:55 Scan ACPI tree for PCI functions
1132	0:44:55 0:0.0 'PCI0' (F96E5C20)
1133	0:44:55 0:2.5 'IDEC' (F96E5CF8)
1134	0:44:55 0:6.7 'PCI1' (F96E7630)
1135	0:44:55 0:7.7 'PCI2' (F96E76A8)
1136	0:44:55 0:8.7 'PCI3' (F96E7720)
1137	0:44:55 0:10.7 'PCI4' (F96E7798)
1138	0:44:55 0:2.0 'S962' (F96E7810)
1139	0:44:55 0:3.0 'USB0' (F96E7E30)
1140	0:44:55 0:3.1 'USB1' (F96E7EE0)
1141	0:44:55 0:3.2 'USB2' (F96E7F90)
1142	0:44:55 0:3.3 'USB3' (F96E8040)
1143	0:44:55 0:4.0 'MAC0' (F96E80F0)
1144	0:44:55 0:2.7 'AUD0' (F96E8140)
1145	0:44:55 0:2.6 'AMR0' (F96E8190)
1146	0:44:55 Bridges found:
1147	0:44:55 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
1148	0:44:55 0:1.0 class:604 type: 1 Bus 0->1
1149	0:44:55 IRQLinks found:
1150	0:44:55 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
1151	0:44:55 A[]
1152	0:44:55 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
1153	0:44:55 A[]
1154	0:44:55 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
1155	0:44:55 A[]
1156	0:44:55 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
1157	0:44:55 A[]
1158	0:44:55 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
1159	0:44:55 A[]
1160	0:44:55 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
1161	0:44:55 A[]
1162	0:44:55 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
1163	0:44:55 A[]
1164	0:44:55 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
1165	0:44:55 A[]
1166	0:44:55 PCI devices found:
1167	0:44:55 0:0.0 1039:648 'PCI0'
1168	0:44:55 0:1.0 1039:1
1169	0:44:55 0:2.0 1039:8 'S962'
1170	0:44:55 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1171	0:44:55 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1172	0:44:55 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
1173	0:44:55 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
1174	0:44:55 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
1175	0:44:55 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
1176	0:44:55 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
1177	0:44:55 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1178	0:44:55 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1179	0:44:55 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1180	0:44:55 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1181	0:44:55 Bus detected - 1
1182	0:44:55 ** AcpiInstall Power Device Status = 0
1183	0:44:55 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
1184	0:44:55 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
1185	0:44:55 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1186	0:44:55 ** AcpiInstall PMTimer Device Status = 0
1187	0:44:55 Total use:94208 unuse:9016 count:1573
1188	0:44:55 Event [_L13] Install GPE0x13
1189	0:44:55 Event [_L0E] Install GPE0xE
1190	0:44:55 Event [_L04] Install GPE0x4
1191	0:44:55 Event [_L07] Install GPE0x7
1192	0:44:55 Event [_L06] Install GPE0x6
1193	0:44:55 Event [_L05] Install GPE0x5
1194	0:44:55 Event [_L08] Install GPE0x8
1195	0:44:55 Event [_L0F] Install GPE0xF
1196	0:44:55 Event [_L0D] Install GPE0xD
1197	0:44:55 Event [_L0B] Install GPE0xB
1198	0:44:55 Event [_L0C] Install GPE0xC
1199	0:44:55 EndScan GPE Status 0
1200	0:44:59 APM: PSD find success. PSD Ftable:F97402BC
1201	0:44:59 APM:Max C state 0
1202	0:44:59 Register Notify 1st FD05929D
1203	0:45:1 FindPCIDevice
1204	0:45:1 Need: B:0x0 D:0x2 F:0x5
1205	0:45:1 Finding APIC0 PIC11 Dev: [IDEC]
1206	0:45:32 Uniaud32: PSD find success. PSD Ftable:F97402BC
1207	0:45:32 FindPCIDevice
1208	0:45:32 Need: B:0x0 D:0x2 F:0x0
1209	0:45:34 APM: End scan power object
1210	0:45:37 ===== Info ========
1211	0:45:37 Int Level 9
1212	0:45:37 In Xrupt F96EFDB8 in arg F96EFDB8
1213	0:45:37 Node
1214	0:45:37 Name [_GPE]
1215	0:45:37 Flags: 0x0
1216	0:45:37 Reg count 2
1217	0:45:37 GPE0x4 Type: Wake
1218	0:45:37 GPE0x5 Type: Wake
1219	0:45:37 GPE0x6 Type: Wake
1220	0:45:37 GPE0x7 Type: Wake
1221	0:45:37 GPE0x8 Type: Wake
1222	0:45:37 GPE0xB Type: Wake
1223	0:45:37 GPE0xC Type: Wake
1224	0:45:37 GPE0xD Type: Wake
1225	0:45:37 GPE0xE Type: Wake
1226	0:45:37 GPE0xF Type: Wake
1227	0:45:37 ===== Info ========
1228	0:45:37 Int Level 9
1229	0:45:37 In Xrupt F96EFDB8 in arg F96EFF30
1230	0:45:37 Node
1231	0:45:37 Name [_GPE]
1232	0:45:37 Flags: 0x0
1233	0:45:37 Reg count 2
1234	0:45:37 GPE0x3 Type: Wake
1235	0:45:44 Event tread
1236	0:45:44 AllocateSuspendMemory s_cpu:0
1237	0:45:44 Alloc s_cpu OK CPU0 2304 bytes at 2C
1238	0:45:44 AllocSuspend: CPU0 CR3:1FF000
1239	0:45:44 Status 1Mb alloc 0
1240	10 Jul 00:45:44 acpica$ log is reading
1241	0:45:44 APM: Setting suspend state:3
1242	0:45:44 APM:Max C state 2
1243	10 Jul 20:27:08 acpica$ log is reading
1244	--:--:-- KEE Version 0x10000
1245	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
1246	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
1247	--:--:-- SS Selector fault
1248	20:26:19 CFG: Link [LNKE] IRQ5
1249	20:26:19 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
1250	20:26:19 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1251	20:26:19 AcpiOsPredefinedOverride: "_REV"
1252	20:26:19 AcpiOsPredefinedOverride: "_OS_"
1253	20:26:19 AcpiOsPredefinedOverride: override to eComStation
1254	20:26:19 AcpiOsPredefinedOverride: "_GL_"
1255	20:26:19 AcpiOsPredefinedOverride: "_OSI"
1256	20:26:19 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1257	20:26:19 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1258	20:26:19 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1259	20:26:19 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1260	20:26:19 ACPI: FACS @ 0x7FFF0000/0x40
1261	20:26:19 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1262	20:26:19 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
1263	20:26:19 Table [DSDT]
1264	20:26:19 Table [FACS]
1265	20:26:19 Table [FACP]
1266	20:26:19 Table [APIC]
1267	20:26:19 Local APIC address: FEE00000h
1268	20:26:19 System also has 8259
1269	20:26:19 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1270	20:26:19 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1271	20:26:19 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1272	20:26:19 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1273	20:26:19 Size of FACDT 244
1274	20:26:19 Type of computer - Unspecified
1275	20:26:19 System vector the SCI interrupt is wired to in 8259 mode. 9
1276	20:26:19 System port address of the SMI Command Port 0x1048
1277	20:26:19 The value to write to SMI_CMD to disable SMI 0x81
1278	20:26:19 The value to write to SMI_CMD to re-enable SMI 0x80
1279	20:26:19 The value to write to SMI_CMD to enter the S4BIOS state 0x0
1280	20:26:19 System port address of the PM1a Event Register Block 1000
1281	20:26:19 System port address of the PM1b Event Register Block 0
1282	20:26:19 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1283	20:26:19 System port address of the PM1a Control Register Block 1004
1284	20:26:19 System port address of the PM1b Control Register Block 0
1285	20:26:19 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1286	20:26:19 System port address of the PM2 Control Register Block 1016
1287	20:26:19 Number of bytes decoded by PM2_CNT_BLK 1
1288	20:26:19 System port address of the Power Management Timer Control Register Block 1008
1289	20:26:19 Number of bytes decoded by PM_TMR_BLK (=4) 4
1290	20:26:19 System port address of General-Purpose Event 0 Register Block 1020
1291	20:26:19 System port address of General-Purpose Event 1 Register Block 1030
1292	20:26:19 Number of bytes decoded by GPE0_BLK 0x4
1293	20:26:19 Number of bytes decoded by GPE1_BLK 0x4
1294	20:26:19 Offset within the ACPI general-purpose event model where GPE1 based events start 10
1295	20:26:19 The worst-case hardware latency to enter and exit a C2 state 90 us
1296	20:26:19 The worst-case hardware latency to enter and exit a C3 state 900 us
1297	20:26:19 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1298	20:26:19 The RTC CMOS RAM index to the day-of-month alarm value 126
1299	20:26:19 The RTC CMOS RAM index to the month of year alarm value 127
1300	20:26:19 IA-PC Boot Architecture Flags 0x0
1301	20:26:19 Fixed feature flags 4A5
1302	20:26:19 The reset register:
1303	20:26:19 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
1304	20:26:19 The value to write to the RESET_REG port to reset the system 0
1305	20:26:19 ***** Throttl Width 0 Offset 1
1306	20:26:19 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
1307	20:26:19 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1308	20:26:19 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1309	20:26:19 ** Scan EC Status = 0 Find 0 EC
1310	20:26:19 ** AcpiInitializeObjects mask:0 Status = 0
1311	20:26:19 Processor [CPU0]
1312	20:26:19 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1313	20:26:19 Status Evaluate Processor 0x0 AE_OK
1314	20:26:19 Usable:1 Counter:0
1315	20:26:19 CPU id to N:0
1316	20:26:19 ProcId: 0x0
1317	20:26:19 P_BLK: 0x0
1318	20:26:19 P_BLK len: 0x0
1319	20:26:19 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1320	20:26:19 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1321	20:26:19 Found bridge "PCI0" BBN is absent status:5
1322	20:26:19 Finding:0 bridges
1323	20:26:19 0:0.0 Class:600 Hdr:80 Bridge H->0
1324	20:26:19 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1325	20:26:19 0:2.0 Class:601 Hdr:80
1326	20:26:19 0:2.3 Class:C00 Hdr:0
1327	20:26:19 0:2.5 Class:101 Hdr:0
1328	20:26:19 0:2.7 Class:401 Hdr:0
1329	20:26:19 0:3.0 Class:C03 Hdr:80
1330	20:26:19 0:3.1 Class:C03 Hdr:0
1331	20:26:19 0:3.2 Class:C03 Hdr:0
1332	20:26:19 0:3.3 Class:C03 Hdr:0
1333	20:26:19 0:4.0 Class:200 Hdr:0
1334	20:26:19 0:8.0 Class:480 Hdr:0
1335	20:26:19 0:10.0 Class:780 Hdr:0
1336	20:26:19 1:0.0 Class:300 Hdr:0
1337	20:26:19 PCI Bus scan: 2 PCI buses found.
1338	20:26:19 Scan ACPI tree for PCI functions
1339	20:26:19 0:0.0 'PCI0' (F96E5C20)
1340	20:26:19 0:2.5 'IDEC' (F96E5CF8)
1341	20:26:19 0:6.7 'PCI1' (F96E7630)
1342	20:26:19 0:7.7 'PCI2' (F96E76A8)
1343	20:26:19 0:8.7 'PCI3' (F96E7720)
1344	20:26:19 0:10.7 'PCI4' (F96E7798)
1345	20:26:19 0:2.0 'S962' (F96E7810)
1346	20:26:19 0:3.0 'USB0' (F96E7E30)
1347	20:26:19 0:3.1 'USB1' (F96E7EE0)
1348	20:26:19 0:3.2 'USB2' (F96E7F90)
1349	20:26:19 0:3.3 'USB3' (F96E8040)
1350	20:26:19 0:4.0 'MAC0' (F96E80F0)
1351	20:26:19 0:2.7 'AUD0' (F96E8140)
1352	20:26:19 0:2.6 'AMR0' (F96E8190)
1353	20:26:19 Bridges found:
1354	20:26:19 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
1355	20:26:19 0:1.0 class:604 type: 1 Bus 0->1
1356	20:26:19 IRQLinks found:
1357	20:26:19 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
1358	20:26:19 A[]
1359	20:26:19 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
1360	20:26:19 A[]
1361	20:26:19 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
1362	20:26:19 A[]
1363	20:26:19 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
1364	20:26:19 A[]
1365	20:26:19 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
1366	20:26:19 A[]
1367	20:26:19 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
1368	20:26:19 A[]
1369	20:26:19 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
1370	20:26:19 A[]
1371	20:26:19 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
1372	20:26:19 A[]
1373	20:26:19 PCI devices found:
1374	20:26:19 0:0.0 1039:648 'PCI0'
1375	20:26:19 0:1.0 1039:1
1376	20:26:19 0:2.0 1039:8 'S962'
1377	20:26:19 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1378	20:26:19 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1379	20:26:19 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
1380	20:26:19 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
1381	20:26:19 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
1382	20:26:19 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
1383	20:26:19 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
1384	20:26:19 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1385	20:26:19 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1386	20:26:19 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1387	20:26:19 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1388	20:26:19 Bus detected - 1
1389	20:26:19 ** AcpiInstall Power Device Status = 0
1390	20:26:19 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
1391	20:26:19 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
1392	20:26:19 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1393	20:26:19 ** AcpiInstall PMTimer Device Status = 0
1394	20:26:19 Total use:94208 unuse:9016 count:1573
1395	20:26:19 Event [_L13] Install GPE0x13
1396	20:26:19 Event [_L0E] Install GPE0xE
1397	20:26:19 Event [_L04] Install GPE0x4
1398	20:26:19 Event [_L07] Install GPE0x7
1399	20:26:19 Event [_L06] Install GPE0x6
1400	20:26:19 Event [_L05] Install GPE0x5
1401	20:26:19 Event [_L08] Install GPE0x8
1402	20:26:19 Event [_L0F] Install GPE0xF
1403	20:26:19 Event [_L0D] Install GPE0xD
1404	20:26:19 Event [_L0B] Install GPE0xB
1405	20:26:19 Event [_L0C] Install GPE0xC
1406	20:26:19 EndScan GPE Status 0
1407	20:26:22 APM: PSD find success. PSD Ftable:F97402BC
1408	20:26:22 APM:Max C state 0
1409	20:26:22 Register Notify 1st FD05929D
1410	20:26:25 FindPCIDevice
1411	20:26:25 Need: B:0x0 D:0x2 F:0x5
1412	20:26:25 Finding APIC0 PIC11 Dev: [IDEC]
1413	20:26:56 Uniaud32: PSD find success. PSD Ftable:F97402BC
1414	20:26:56 FindPCIDevice
1415	20:26:56 Need: B:0x0 D:0x2 F:0x0
1416	20:26:58 APM: End scan power object
1417	20:27:1 ===== Info ========
1418	20:27:1 Int Level 9
1419	20:27:1 In Xrupt F96EFDB8 in arg F96EFDB8
1420	20:27:1 Node
1421	20:27:1 Name [_GPE]
1422	20:27:1 Flags: 0x0
1423	20:27:1 Reg count 2
1424	20:27:1 GPE0x4 Type: Wake
1425	20:27:1 GPE0x5 Type: Wake
1426	20:27:1 GPE0x6 Type: Wake
1427	20:27:1 GPE0x7 Type: Wake
1428	20:27:1 GPE0x8 Type: Wake
1429	20:27:1 GPE0xB Type: Wake
1430	20:27:1 GPE0xC Type: Wake
1431	20:27:1 GPE0xD Type: Wake
1432	20:27:1 GPE0xE Type: Wake
1433	20:27:1 GPE0xF Type: Wake
1434	20:27:1 ===== Info ========
1435	20:27:1 Int Level 9
1436	20:27:1 In Xrupt F96EFDB8 in arg F96EFF30
1437	20:27:1 Node
1438	20:27:1 Name [_GPE]
1439	20:27:1 Flags: 0x0
1440	20:27:1 Reg count 2
1441	20:27:1 GPE0x3 Type: Wake
1442	20:27:8 Event tread
1443	20:27:8 AllocateSuspendMemory s_cpu:0
1444	20:27:8 Alloc s_cpu OK CPU0 2304 bytes at 8
1445	20:27:8 AllocSuspend: CPU0 CR3:1FF000
1446	20:27:8 Status 1Mb alloc 0
1447	10 Jul 20:27:08 acpica$ log is reading
1448	20:27:8 APM: Setting suspend state:3
1449	20:27:8 APM:Max C state 2
1450	10 Jul 22:59:37 AcpiDaemon LID thread is starting ID 0x4
1451	on 0x10000
1452	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
1453	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
1454	--:--:-- SS Selector fault
1455	22:58:47 CFG: Link [LNKE] IRQ5
1456	22:58:47 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
1457	22:58:47 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1458	22:58:47 AcpiOsPredefinedOverride: "_REV"
1459	22:58:47 AcpiOsPredefinedOverride: "_OS_"
1460	22:58:47 AcpiOsPredefinedOverride: override to eComStation
1461	22:58:47 AcpiOsPredefinedOverride: "_GL_"
1462	22:58:47 AcpiOsPredefinedOverride: "_OSI"
1463	22:58:47 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1464	22:58:47 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1465	22:58:47 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1466	22:58:47 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1467	22:58:47 ACPI: FACS @ 0x7FFF0000/0x40
1468	22:58:47 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1469	22:58:47 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
1470	22:58:47 Table [DSDT]
1471	22:58:47 Table [FACS]
1472	22:58:47 Table [FACP]
1473	22:58:47 Table [APIC]
1474	22:58:47 Local APIC address: FEE00000h
1475	22:58:47 System also has 8259
1476	22:58:47 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1477	22:58:47 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1478	22:58:47 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1479	22:58:47 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1480	22:58:47 Size of FACDT 244
1481	22:58:47 Type of computer - Unspecified
1482	22:58:47 System vector the SCI interrupt is wired to in 8259 mode. 9
1483	22:58:47 System port address of the SMI Command Port 0x1048
1484	22:58:47 The value to write to SMI_CMD to disable SMI 0x81
1485	22:58:47 The value to write to SMI_CMD to re-enable SMI 0x80
1486	22:58:47 The value to write to SMI_CMD to enter the S4BIOS state 0x0
1487	22:58:47 System port address of the PM1a Event Register Block 1000
1488	22:58:47 System port address of the PM1b Event Register Block 0
1489	22:58:47 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1490	22:58:47 System port address of the PM1a Control Register Block 1004
1491	22:58:47 System port address of the PM1b Control Register Block 0
1492	22:58:47 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1493	22:58:47 System port address of the PM2 Control Register Block 1016
1494	22:58:47 Number of bytes decoded by PM2_CNT_BLK 1
1495	22:58:47 System port address of the Power Management Timer Control Register Block 1008
1496	22:58:47 Number of bytes decoded by PM_TMR_BLK (=4) 4
1497	22:58:47 System port address of General-Purpose Event 0 Register Block 1020
1498	22:58:47 System port address of General-Purpose Event 1 Register Block 1030
1499	22:58:47 Number of bytes decoded by GPE0_BLK 0x4
1500	22:58:47 Number of bytes decoded by GPE1_BLK 0x4
1501	22:58:47 Offset within the ACPI general-purpose event model where GPE1 based events start 10
1502	22:58:47 The worst-case hardware latency to enter and exit a C2 state 90 us
1503	22:58:47 The worst-case hardware latency to enter and exit a C3 state 900 us
1504	22:58:47 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1505	22:58:47 The RTC CMOS RAM index to the day-of-month alarm value 126
1506	22:58:47 The RTC CMOS RAM index to the month of year alarm value 127
1507	22:58:47 IA-PC Boot Architecture Flags 0x0
1508	22:58:47 Fixed feature flags 4A5
1509	22:58:47 The reset register:
1510	22:58:47 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
1511	22:58:47 The value to write to the RESET_REG port to reset the system 0
1512	22:58:47 ***** Throttl Width 0 Offset 1
1513	22:58:47 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
1514	22:58:47 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1515	22:58:47 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1516	22:58:47 ** Scan EC Status = 0 Find 0 EC
1517	22:58:47 ** AcpiInitializeObjects mask:0 Status = 0
1518	22:58:47 Processor [CPU0]
1519	22:58:47 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1520	22:58:47 Status Evaluate Processor 0x0 AE_OK
1521	22:58:47 Usable:1 Counter:0
1522	22:58:47 CPU id to N:0
1523	22:58:47 ProcId: 0x0
1524	22:58:47 P_BLK: 0x0
1525	22:58:47 P_BLK len: 0x0
1526	22:58:47 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1527	22:58:47 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1528	22:58:47 Found bridge "PCI0" BBN is absent status:5
1529	22:58:47 Finding:0 bridges
1530	22:58:47 0:0.0 Class:600 Hdr:80 Bridge H->0
1531	22:58:47 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1532	22:58:47 0:2.0 Class:601 Hdr:80
1533	22:58:47 0:2.3 Class:C00 Hdr:0
1534	22:58:47 0:2.5 Class:101 Hdr:0
1535	22:58:47 0:2.7 Class:401 Hdr:0
1536	22:58:47 0:3.0 Class:C03 Hdr:80
1537	22:58:47 0:3.1 Class:C03 Hdr:0
1538	22:58:47 0:3.2 Class:C03 Hdr:0
1539	22:58:47 0:3.3 Class:C03 Hdr:0
1540	22:58:47 0:4.0 Class:200 Hdr:0
1541	22:58:47 0:8.0 Class:480 Hdr:0
1542	22:58:47 0:10.0 Class:780 Hdr:0
1543	22:58:47 1:0.0 Class:300 Hdr:0
1544	22:58:47 PCI Bus scan: 2 PCI buses found.
1545	22:58:47 Scan ACPI tree for PCI functions
1546	22:58:47 0:0.0 'PCI0' (F96E5C20)
1547	22:58:47 0:2.5 'IDEC' (F96E5CF8)
1548	22:58:47 0:6.7 'PCI1' (F96E7630)
1549	22:58:47 0:7.7 'PCI2' (F96E76A8)
1550	22:58:47 0:8.7 'PCI3' (F96E7720)
1551	22:58:47 0:10.7 'PCI4' (F96E7798)
1552	22:58:47 0:2.0 'S962' (F96E7810)
1553	22:58:47 0:3.0 'USB0' (F96E7E30)
1554	22:58:47 0:3.1 'USB1' (F96E7EE0)
1555	22:58:47 0:3.2 'USB2' (F96E7F90)
1556	22:58:47 0:3.3 'USB3' (F96E8040)
1557	22:58:47 0:4.0 'MAC0' (F96E80F0)
1558	22:58:47 0:2.7 'AUD0' (F96E8140)
1559	22:58:47 0:2.6 'AMR0' (F96E8190)
1560	22:58:47 Bridges found:
1561	22:58:47 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
1562	22:58:47 0:1.0 class:604 type: 1 Bus 0->1
1563	22:58:47 IRQLinks found:
1564	22:58:47 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
1565	22:58:47 A[]
1566	22:58:47 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
1567	22:58:47 A[]
1568	22:58:47 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
1569	22:58:47 A[]
1570	22:58:47 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
1571	22:58:47 A[]
1572	22:58:47 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
1573	22:58:47 A[]
1574	22:58:47 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
1575	22:58:47 A[]
1576	22:58:47 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
1577	22:58:47 A[]
1578	22:58:47 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
1579	22:58:47 A[]
1580	22:58:47 PCI devices found:
1581	22:58:47 0:0.0 1039:648 'PCI0'
1582	22:58:47 0:1.0 1039:1
1583	22:58:47 0:2.0 1039:8 'S962'
1584	22:58:47 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1585	22:58:47 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1586	22:58:47 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
1587	22:58:47 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
1588	22:58:47 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
1589	22:58:47 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
1590	22:58:47 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
1591	22:58:47 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1592	22:58:47 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1593	22:58:47 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1594	22:58:47 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1595	22:58:47 Bus detected - 1
1596	22:58:47 ** AcpiInstall Power Device Status = 0
1597	22:58:47 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
1598	22:58:47 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
1599	22:58:47 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1600	22:58:47 ** AcpiInstall PMTimer Device Status = 0
1601	22:58:47 Total use:94208 unuse:9016 count:1573
1602	22:58:47 Event [_L13] Install GPE0x13
1603	22:58:47 Event [_L0E] Install GPE0xE
1604	22:58:47 Event [_L04] Install GPE0x4
1605	22:58:47 Event [_L07] Install GPE0x7
1606	22:58:47 Event [_L06] Install GPE0x6
1607	22:58:47 Event [_L05] Install GPE0x5
1608	22:58:47 Event [_L08] Install GPE0x8
1609	22:58:47 Event [_L0F] Install GPE0xF
1610	22:58:47 Event [_L0D] Install GPE0xD
1611	22:58:47 Event [_L0B] Install GPE0xB
1612	22:58:47 Event [_L0C] Install GPE0xC
1613	22:58:47 EndScan GPE Status 0
1614	22:58:51 APM: PSD find success. PSD Ftable:F97402BC
1615	22:58:51 APM:Max C state 0
1616	22:58:51 Register Notify 1st FD05929D
1617	22:58:54 FindPCIDevice
1618	22:58:54 Need: B:0x0 D:0x2 F:0x5
1619	22:58:54 Finding APIC0 PIC11 Dev: [IDEC]
1620	22:59:25 Uniaud32: PSD find success. PSD Ftable:F97402BC
1621	22:59:25 FindPCIDevice
1622	22:59:25 Need: B:0x0 D:0x2 F:0x0
1623	22:59:27 APM: End scan power object
1624	22:59:30 ===== Info ========
1625	22:59:30 Int Level 9
1626	22:59:30 In Xrupt F96EFDB8 in arg F96EFDB8
1627	22:59:30 Node
1628	22:59:30 Name [_GPE]
1629	22:59:30 Flags: 0x0
1630	22:59:30 Reg count 2
1631	22:59:30 GPE0x4 Type: Wake
1632	22:59:30 GPE0x5 Type: Wake
1633	22:59:30 GPE0x6 Type: Wake
1634	22:59:30 GPE0x7 Type: Wake
1635	22:59:30 GPE0x8 Type: Wake
1636	22:59:30 GPE0xB Type: Wake
1637	22:59:30 GPE0xC Type: Wake
1638	22:59:30 GPE0xD Type: Wake
1639	22:59:30 GPE0xE Type: Wake
1640	22:59:30 GPE0xF Type: Wake
1641	22:59:30 ===== Info ========
1642	22:59:30 Int Level 9
1643	22:59:30 In Xrupt F96EFDB8 in arg F96EFF30
1644	22:59:30 Node
1645	22:59:30 Name [_GPE]
1646	22:59:30 Flags: 0x0
1647	22:59:30 Reg count 2
1648	22:59:30 GPE0x3 Type: Wake
1649	22:59:37 Event tread
1650	22:59:37 AllocateSuspendMemory s_cpu:0
1651	22:59:37 Alloc s_cpu OK CPU0 2304 bytes at 25
1652	22:59:37 AllocSuspend: CPU0 CR3:1FF000
1653	22:59:37 Status 1Mb alloc 0
1654	10 Jul 22:59:37 acpica$ log is reading
1655	22:59:37 APM: Setting suspend state:3
1656	22:59:37 APM:Max C state 2
1657	10 Jul 23:07:34 acpica$ log is reading
1658	--:--:-- KEE Version 0x10000
1659	--:--:--
1660	PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
1661	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
1662	--:--:-- SS Selector fault
1663	23:6:45 CFG: Link [LNKE] IRQ5
1664	23:6:45 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
1665	23:6:45 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1666	23:6:45 AcpiOsPredefinedOverride: "_REV"
1667	23:6:45 AcpiOsPredefinedOverride: "_OS_"
1668	23:6:45 AcpiOsPredefinedOverride: override to eComStation
1669	23:6:45 AcpiOsPredefinedOverride: "_GL_"
1670	23:6:45 AcpiOsPredefinedOverride: "_OSI"
1671	23:6:45 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1672	23:6:45 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1673	23:6:45 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1674	23:6:45 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1675	23:6:45 ACPI: FACS @ 0x7FFF0000/0x40
1676	23:6:45 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1677	23:6:45 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
1678	23:6:45 Table [DSDT]
1679	23:6:45 Table [FACS]
1680	23:6:45 Table [FACP]
1681	23:6:45 Table [APIC]
1682	23:6:45 Local APIC address: FEE00000h
1683	23:6:45 System also has 8259
1684	23:6:45 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1685	23:6:45 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1686	23:6:45 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1687	23:6:45 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1688	23:6:45 Size of FACDT 244
1689	23:6:45 Type of computer - Unspecified
1690	23:6:45 System vector the SCI interrupt is wired to in 8259 mode. 9
1691	23:6:45 System port address of the SMI Command Port 0x1048
1692	23:6:45 The value to write to SMI_CMD to disable SMI 0x81
1693	23:6:45 The value to write to SMI_CMD to re-enable SMI 0x80
1694	23:6:45 The value to write to SMI_CMD to enter the S4BIOS state 0x0
1695	23:6:45 System port address of the PM1a Event Register Block 1000
1696	23:6:45 System port address of the PM1b Event Register Block 0
1697	23:6:45 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1698	23:6:45 System port address of the PM1a Control Register Block 1004
1699	23:6:45 System port address of the PM1b Control Register Block 0
1700	23:6:45 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1701	23:6:45 System port address of the PM2 Control Register Block 1016
1702	23:6:45 Number of bytes decoded by PM2_CNT_BLK 1
1703	23:6:45 System port address of the Power Management Timer Control Register Block 1008
1704	23:6:45 Number of bytes decoded by PM_TMR_BLK (=4) 4
1705	23:6:45 System port address of General-Purpose Event 0 Register Block 1020
1706	23:6:45 System port address of General-Purpose Event 1 Register Block 1030
1707	23:6:45 Number of bytes decoded by GPE0_BLK 0x4
1708	23:6:45 Number of bytes decoded by GPE1_BLK 0x4
1709	23:6:45 Offset within the ACPI general-purpose event model where GPE1 based events start 10
1710	23:6:45 The worst-case hardware latency to enter and exit a C2 state 90 us
1711	23:6:45 The worst-case hardware latency to enter and exit a C3 state 900 us
1712	23:6:45 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1713	23:6:45 The RTC CMOS RAM index to the day-of-month alarm value 126
1714	23:6:45 The RTC CMOS RAM index to the month of year alarm value 127
1715	23:6:45 IA-PC Boot Architecture Flags 0x0
1716	23:6:45 Fixed feature flags 4A5
1717	23:6:45 The reset register:
1718	23:6:45 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
1719	23:6:45 The value to write to the RESET_REG port to reset the system 0
1720	23:6:45 ***** Throttl Width 0 Offset 1
1721	23:6:45 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
1722	23:6:45 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1723	23:6:45 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1724	23:6:45 ** Scan EC Status = 0 Find 0 EC
1725	23:6:45 ** AcpiInitializeObjects mask:0 Status = 0
1726	23:6:45 Processor [CPU0]
1727	23:6:45 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1728	23:6:45 Status Evaluate Processor 0x0 AE_OK
1729	23:6:45 Usable:1 Counter:0
1730	23:6:45 CPU id to N:0
1731	23:6:45 ProcId: 0x0
1732	23:6:45 P_BLK: 0x0
1733	23:6:45 P_BLK len: 0x0
1734	23:6:45 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1735	23:6:45 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1736	23:6:45 ** AcpiInstall Power Device Status = 0
1737	23:6:45 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
1738	23:6:45 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
1739	23:6:45 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1740	23:6:45 ** AcpiInstall PMTimer Device Status = 0
1741	23:6:45 Total use:77360 unuse:11376 count:1533
1742	23:6:45 Event [_L13] Install GPE0x13
1743	23:6:45 Event [_L0E] Install GPE0xE
1744	23:6:45 Event [_L04] Install GPE0x4
1745	23:6:45 Event [_L07] Install GPE0x7
1746	23:6:45 Event [_L06] Install GPE0x6
1747	23:6:45 Event [_L05] Install GPE0x5
1748	23:6:45 Event [_L08] Install GPE0x8
1749	23:6:45 Event [_L0F] Install GPE0xF
1750	23:6:45 Event [_L0D] Install GPE0xD
1751	23:6:45 Event [_L0B] Install GPE0xB
1752	23:6:45 Event [_L0C] Install GPE0xC
1753	23:6:45 EndScan GPE Status 0
1754	23:6:48 APM: PSD find success. PSD Ftable:F97402BC
1755	23:6:48 APM:Max C state 0
1756	23:6:48 Register Notify 1st FD05929D
1757	23:6:51 FindPCIDevice
1758	23:7:21 Uniaud32: PSD find success. PSD Ftable:F97402BC
1759	23:7:21 FindPCIDevice
1760	23:7:23 APM: End scan power object
1761	23:7:27 ===== Info ========
1762	23:7:27 Int Level 9
1763	23:7:27 In Xrupt F96EFDB8 in arg F96EFDB8
1764	23:7:27 Node
1765	23:7:27 Name [_GPE]
1766	23:7:27 Flags: 0x0
1767	23:7:27 Reg count 2
1768	23:7:27 GPE0x4 Type: Wake
1769	23:7:27 GPE0x5 Type: Wake
1770	23:7:27 GPE0x6 Type: Wake
1771	23:7:27 GPE0x7 Type: Wake
1772	23:7:27 GPE0x8 Type: Wake
1773	23:7:27 GPE0xB Type: Wake
1774	23:7:27 GPE0xC Type: Wake
1775	23:7:27 GPE0xD Type: Wake
1776	23:7:27 GPE0xE Type: Wake
1777	23:7:27 GPE0xF Type: Wake
1778	23:7:27 ===== Info ========
1779	23:7:27 Int Level 9
1780	23:7:27 In Xrupt F96EFDB8 in arg F96EFF30
1781	23:7:27 Node
1782	23:7:27 Name [_GPE]
1783	23:7:27 Flags: 0x0
1784	23:7:27 Reg count 2
1785	23:7:27 GPE0x3 Type: Wake
1786	23:7:34 Event tread
1787	23:7:34 AllocateSuspendMemory s_cpu:0
1788	23:7:34 Alloc s_cpu OK CPU0 2304 bytes at 22
1789	23:7:34 AllocSuspend: CPU0 CR3:1FF000
1790	23:7:34 Status 1Mb alloc 0
1791	10 Jul 23:07:34 acpica$ log is reading
1792	23:7:34 APM: Setting suspend state:3
1793	23:7:34 APM:Max C state 2
1794	10 Jul 23:14:16 acpica$ log is reading
1795	--:--:-- KEE Version 0x10000
1796	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
1797	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
1798	--:--:-- SS Selector fault
1799	23:13:29 CFG: Link [LNKE] IRQ5
1800	23:13:29 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
1801	23:13:29 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
1802	23:13:29 AcpiOsPredefinedOverride: "_REV"
1803	23:13:29 AcpiOsPredefinedOverride: "_OS_"
1804	23:13:29 AcpiOsPredefinedOverride: override to eComStation
1805	23:13:29 AcpiOsPredefinedOverride: "_GL_"
1806	23:13:29 AcpiOsPredefinedOverride: "_OSI"
1807	23:13:29 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
1808	23:13:29 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1809	23:13:29 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1810	23:13:29 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
1811	23:13:29 ACPI: FACS @ 0x7FFF0000/0x40
1812	23:13:29 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
1813	23:13:29 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
1814	23:13:29 Table [DSDT]
1815	23:13:29 Table [FACS]
1816	23:13:29 Table [FACP]
1817	23:13:29 Table [APIC]
1818	23:13:29 Local APIC address: FEE00000h
1819	23:13:29 System also has 8259
1820	23:13:29 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
1821	23:13:29 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
1822	23:13:29 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
1823	23:13:29 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
1824	23:13:29 Size of FACDT 244
1825	23:13:29 Type of computer - Unspecified
1826	23:13:29 System vector the SCI interrupt is wired to in 8259 mode. 9
1827	23:13:29 System port address of the SMI Command Port 0x1048
1828	23:13:29 The value to write to SMI_CMD to disable SMI 0x81
1829	23:13:29 The value to write to SMI_CMD to re-enable SMI 0x80
1830	23:13:29 The value to write to SMI_CMD to enter the S4BIOS state 0x0
1831	23:13:29 System port address of the PM1a Event Register Block 1000
1832	23:13:29 System port address of the PM1b Event Register Block 0
1833	23:13:29 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
1834	23:13:29 System port address of the PM1a Control Register Block 1004
1835	23:13:29 System port address of the PM1b Control Register Block 0
1836	23:13:29 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
1837	23:13:29 System port address of the PM2 Control Register Block 1016
1838	23:13:29 Number of bytes decoded by PM2_CNT_BLK 1
1839	23:13:29 System port address of the Power Management Timer Control Register Block 1008
1840	23:13:29 Number of bytes decoded by PM_TMR_BLK (=4) 4
1841	23:13:29 System port address of General-Purpose Event 0 Register Block 1020
1842	23:13:29 System port address of General-Purpose Event 1 Register Block 1030
1843	23:13:29 Number of bytes decoded by GPE0_BLK 0x4
1844	23:13:29 Number of bytes decoded by GPE1_BLK 0x4
1845	23:13:29 Offset within the ACPI general-purpose event model where GPE1 based events start 10
1846	23:13:29 The worst-case hardware latency to enter and exit a C2 state 90 us
1847	23:13:29 The worst-case hardware latency to enter and exit a C3 state 900 us
1848	23:13:29 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
1849	23:13:29 The RTC CMOS RAM index to the day-of-month alarm value 126
1850	23:13:29 The RTC CMOS RAM index to the month of year alarm value 127
1851	23:13:29 IA-PC Boot Architecture Flags 0x0
1852	23:13:29 Fixed feature flags 4A5
1853	23:13:29 The reset register:
1854	23:13:29 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
1855	23:13:29 The value to write to the RESET_REG port to reset the system 0
1856	23:13:29 ***** Throttl Width 0 Offset 1
1857	23:13:29 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
1858	23:13:29 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1859	23:13:29 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
1860	23:13:29 ** Scan EC Status = 0 Find 0 EC
1861	23:13:29 ** AcpiInitializeObjects mask:0 Status = 0
1862	23:13:29 Processor [CPU0]
1863	23:13:29 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
1864	23:13:29 Status Evaluate Processor 0x0 AE_OK
1865	23:13:29 Usable:1 Counter:0
1866	23:13:29 CPU id to N:0
1867	23:13:29 ProcId: 0x0
1868	23:13:29 P_BLK: 0x0
1869	23:13:29 P_BLK len: 0x0
1870	23:13:29 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
1871	23:13:29 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
1872	23:13:29 Found bridge "PCI0" BBN is absent status:5
1873	23:13:29 Finding:0 bridges
1874	23:13:29 0:0.0 Class:600 Hdr:80 Bridge H->0
1875	23:13:29 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1876	23:13:29 0:2.0 Class:601 Hdr:80
1877	23:13:29 0:2.3 Class:C00 Hdr:0
1878	23:13:29 0:2.5 Class:101 Hdr:0
1879	23:13:29 0:2.7 Class:401 Hdr:0
1880	23:13:29 0:3.0 Class:C03 Hdr:80
1881	23:13:29 0:3.1 Class:C03 Hdr:0
1882	23:13:29 0:3.2 Class:C03 Hdr:0
1883	23:13:29 0:3.3 Class:C03 Hdr:0
1884	23:13:29 0:4.0 Class:200 Hdr:0
1885	23:13:29 0:8.0 Class:480 Hdr:0
1886	23:13:29 0:10.0 Class:780 Hdr:0
1887	23:13:29 1:0.0 Class:300 Hdr:0
1888	23:13:29 PCI Bus scan: 2 PCI buses found.
1889	23:13:29 Scan ACPI tree for PCI functions
1890	23:13:29 0:0.0 'PCI0' (F96E5C20)
1891	23:13:29 0:2.5 'IDEC' (F96E5CF8)
1892	23:13:29 0:6.7 'PCI1' (F96E7630)
1893	23:13:29 0:7.7 'PCI2' (F96E76A8)
1894	23:13:29 0:8.7 'PCI3' (F96E7720)
1895	23:13:29 0:10.7 'PCI4' (F96E7798)
1896	23:13:29 0:2.0 'S962' (F96E7810)
1897	23:13:29 0:3.0 'USB0' (F96E7E30)
1898	23:13:29 0:3.1 'USB1' (F96E7EE0)
1899	23:13:29 0:3.2 'USB2' (F96E7F90)
1900	23:13:29 0:3.3 'USB3' (F96E8040)
1901	23:13:29 0:4.0 'MAC0' (F96E80F0)
1902	23:13:29 0:2.7 'AUD0' (F96E8140)
1903	23:13:29 0:2.6 'AMR0' (F96E8190)
1904	23:13:29 Bridges found:
1905	23:13:29 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
1906	23:13:29 0:1.0 class:604 type: 1 Bus 0->1
1907	23:13:29 IRQLinks found:
1908	23:13:29 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
1909	23:13:29 A[]
1910	23:13:29 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
1911	23:13:29 A[]
1912	23:13:29 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
1913	23:13:29 A[]
1914	23:13:29 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
1915	23:13:29 A[]
1916	23:13:29 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
1917	23:13:29 A[]
1918	23:13:29 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
1919	23:13:29 A[]
1920	23:13:29 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
1921	23:13:29 A[]
1922	23:13:29 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
1923	23:13:29 A[]
1924	23:13:29 PCI devices found:
1925	23:13:29 0:0.0 1039:648 'PCI0'
1926	23:13:29 0:1.0 1039:1
1927	23:13:29 0:2.0 1039:8 'S962'
1928	23:13:29 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1929	23:13:29 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1930	23:13:29 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
1931	23:13:29 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
1932	23:13:29 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
1933	23:13:29 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
1934	23:13:29 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
1935	23:13:29 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1936	23:13:29 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
1937	23:13:29 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
1938	23:13:29 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
1939	23:13:29 Bus detected - 1
1940	23:13:29 ** AcpiInstall Power Device Status = 0
1941	23:13:29 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
1942	23:13:29 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
1943	23:13:29 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
1944	23:13:29 ** AcpiInstall PMTimer Device Status = 0
1945	23:13:29 Total use:94208 unuse:9016 count:1573
1946	23:13:29 Event [_L13] Install GPE0x13
1947	23:13:29 Event [_L0E] Install GPE0xE
1948	23:13:29 Event [_L04] Install GPE0x4
1949	23:13:29 Event [_L07] Install GPE0x7
1950	23:13:29 Event [_L06] Install GPE0x6
1951	23:13:29 Event [_L05] Install GPE0x5
1952	23:13:29 Event [_L08] Install GPE0x8
1953	23:13:29 Event [_L0F] Install GPE0xF
1954	23:13:29 Event [_L0D] Install GPE0xD
1955	23:13:29 Event [_L0B] Install GPE0xB
1956	23:13:29 Event [_L0C] Install GPE0xC
1957	23:13:29 EndScan GPE Status 0
1958	23:13:33 APM: PSD find success. PSD Ftable:F97402BC
1959	23:13:33 APM:Max C state 0
1960	23:13:33 Register Notify 1st FD05929D
1961	23:13:35 FindPCIDevice
1962	23:13:35 Need: B:0x0 D:0x2 F:0x5
1963	23:13:35 Finding APIC0 PIC11 Dev: [IDEC]
1964	23:14:6 Uniaud32: PSD find success. PSD Ftable:F97402BC
1965	23:14:6 FindPCIDevice
1966	23:14:6 Need: B:0x0 D:0x2 F:0x0
1967	23:14:7 APM: End scan power object
1968	23:14:11 ===== Info ========
1969	23:14:11 Int Level 9
1970	23:14:11 In Xrupt F96EFDB8 in arg F96EFDB8
1971	23:14:11 Node
1972	23:14:11 Name [_GPE]
1973	23:14:11 Flags: 0x0
1974	23:14:11 Reg count 2
1975	23:14:11 GPE0x4 Type: Wake
1976	23:14:11 GPE0x5 Type: Wake
1977	23:14:11 GPE0x6 Type: Wake
1978	23:14:11 GPE0x7 Type: Wake
1979	23:14:11 GPE0x8 Type: Wake
1980	23:14:11 GPE0xB Type: Wake
1981	23:14:11 GPE0xC Type: Wake
1982	23:14:11 GPE0xD Type: Wake
1983	23:14:11 GPE0xE Type: Wake
1984	23:14:11 GPE0xF Type: Wake
1985	23:14:11 ===== Info ========
1986	23:14:11 Int Level 9
1987	23:14:11 In Xrupt F96EFDB8 in arg F96EFF30
1988	23:14:11 Node
1989	23:14:11 Name [_GPE]
1990	23:14:11 Flags: 0x0
1991	23:14:11 Reg count 2
1992	23:14:11 GPE0x3 Type: Wake
1993	23:14:16 Event tread
1994	23:14:16 AllocateSuspendMemory s_cpu:0
1995	23:14:16 Alloc s_cpu OK CPU0 2304 bytes at 10
1996	23:14:16 AllocSuspend: CPU0 CR3:1FF000
1997	23:14:16 Status 1Mb alloc 0
1998	10 Jul 23:14:16 acpica$ log is reading
1999	23:14:16 APM: Setting suspend state:3
2000	23:14:16 APM:Max C state 2
2001	10 Jul 23:22:35 acpica$ log is reading
2002	--:--:-- KEE Version 0x10000
2003	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
2004	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
2005	--:--:-- SS Selector fault
2006	23:21:46 CFG: Link [LNKE] IRQ5
2007	23:21:46 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
2008	23:21:46 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
2009	23:21:46 AcpiOsPredefinedOverride: "_REV"
2010	23:21:46 AcpiOsPredefinedOverride: "_OS_"
2011	23:21:46 AcpiOsPredefinedOverride: override to eComStation
2012	23:21:46 AcpiOsPredefinedOverride: "_GL_"
2013	23:21:46 AcpiOsPredefinedOverride: "_OSI"
2014	23:21:46 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
2015	23:21:46 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2016	23:21:46 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2017	23:21:46 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
2018	23:21:46 ACPI: FACS @ 0x7FFF0000/0x40
2019	23:21:46 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2020	23:21:46 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
2021	23:21:46 Table [DSDT]
2022	23:21:46 Table [FACS]
2023	23:21:46 Table [FACP]
2024	23:21:46 Table [APIC]
2025	23:21:46 Local APIC address: FEE00000h
2026	23:21:46 System also has 8259
2027	23:21:46 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
2028	23:21:46 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
2029	23:21:46 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
2030	23:21:46 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
2031	23:21:46 Size of FACDT 244
2032	23:21:46 Type of computer - Unspecified
2033	23:21:46 System vector the SCI interrupt is wired to in 8259 mode. 9
2034	23:21:46 System port address of the SMI Command Port 0x1048
2035	23:21:46 The value to write to SMI_CMD to disable SMI 0x81
2036	23:21:46 The value to write to SMI_CMD to re-enable SMI 0x80
2037	23:21:46 The value to write to SMI_CMD to enter the S4BIOS state 0x0
2038	23:21:46 System port address of the PM1a Event Register Block 1000
2039	23:21:46 System port address of the PM1b Event Register Block 0
2040	23:21:46 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
2041	23:21:46 System port address of the PM1a Control Register Block 1004
2042	23:21:46 System port address of the PM1b Control Register Block 0
2043	23:21:46 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
2044	23:21:46 System port address of the PM2 Control Register Block 1016
2045	23:21:46 Number of bytes decoded by PM2_CNT_BLK 1
2046	23:21:46 System port address of the Power Management Timer Control Register Block 1008
2047	23:21:46 Number of bytes decoded by PM_TMR_BLK (=4) 4
2048	23:21:46 System port address of General-Purpose Event 0 Register Block 1020
2049	23:21:46 System port address of General-Purpose Event 1 Register Block 1030
2050	23:21:46 Number of bytes decoded by GPE0_BLK 0x4
2051	23:21:46 Number of bytes decoded by GPE1_BLK 0x4
2052	23:21:46 Offset within the ACPI general-purpose event model where GPE1 based events start 10
2053	23:21:46 The worst-case hardware latency to enter and exit a C2 state 90 us
2054	23:21:46 The worst-case hardware latency to enter and exit a C3 state 900 us
2055	23:21:46 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
2056	23:21:46 The RTC CMOS RAM index to the day-of-month alarm value 126
2057	23:21:46 The RTC CMOS RAM index to the month of year alarm value 127
2058	23:21:46 IA-PC Boot Architecture Flags 0x0
2059	23:21:46 Fixed feature flags 4A5
2060	23:21:46 The reset register:
2061	23:21:46 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
2062	23:21:46 The value to write to the RESET_REG port to reset the system 0
2063	23:21:46 ***** Throttl Width 0 Offset 1
2064	23:21:46 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
2065	23:21:46 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2066	23:21:46 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2067	23:21:46 ** Scan EC Status = 0 Find 0 EC
2068	23:21:46 ** AcpiInitializeObjects mask:0 Status = 0
2069	23:21:46 Processor [CPU0]
2070	23:21:46 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
2071	23:21:46 Status Evaluate Processor 0x0 AE_OK
2072	23:21:46 Usable:1 Counter:0
2073	23:21:46 CPU id to N:0
2074	23:21:46 ProcId: 0x0
2075	23:21:46 P_BLK: 0x0
2076	23:21:46 P_BLK len: 0x0
2077	23:21:46 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
2078	23:21:46 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
2079	23:21:46 Found bridge "PCI0" BBN is absent status:5
2080	23:21:46 Finding:0 bridges
2081	23:21:46 0:0.0 Class:600 Hdr:80 Bridge H->0
2082	23:21:46 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
2083	23:21:46 0:2.0 Class:601 Hdr:80
2084	23:21:46 0:2.3 Class:C00 Hdr:0
2085	23:21:46 0:2.5 Class:101 Hdr:0
2086	23:21:46 0:2.7 Class:401 Hdr:0
2087	23:21:46 0:3.0 Class:C03 Hdr:80
2088	23:21:46 0:3.1 Class:C03 Hdr:0
2089	23:21:46 0:3.2 Class:C03 Hdr:0
2090	23:21:46 0:3.3 Class:C03 Hdr:0
2091	23:21:46 0:4.0 Class:200 Hdr:0
2092	23:21:46 0:8.0 Class:480 Hdr:0
2093	23:21:46 0:10.0 Class:780 Hdr:0
2094	23:21:46 1:0.0 Class:300 Hdr:0
2095	23:21:46 PCI Bus scan: 2 PCI buses found.
2096	23:21:46 Scan ACPI tree for PCI functions
2097	23:21:46 0:0.0 'PCI0' (F96E5C20)
2098	23:21:46 0:2.5 'IDEC' (F96E5CF8)
2099	23:21:46 0:6.7 'PCI1' (F96E7630)
2100	23:21:46 0:7.7 'PCI2' (F96E76A8)
2101	23:21:46 0:8.7 'PCI3' (F96E7720)
2102	23:21:46 0:10.7 'PCI4' (F96E7798)
2103	23:21:46 0:2.0 'S962' (F96E7810)
2104	23:21:46 0:3.0 'USB0' (F96E7E30)
2105	23:21:46 0:3.1 'USB1' (F96E7EE0)
2106	23:21:46 0:3.2 'USB2' (F96E7F90)
2107	23:21:46 0:3.3 'USB3' (F96E8040)
2108	23:21:46 0:4.0 'MAC0' (F96E80F0)
2109	23:21:46 0:2.7 'AUD0' (F96E8140)
2110	23:21:46 0:2.6 'AMR0' (F96E8190)
2111	23:21:46 Bridges found:
2112	23:21:46 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
2113	23:21:46 0:1.0 class:604 type: 1 Bus 0->1
2114	23:21:46 IRQLinks found:
2115	23:21:46 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
2116	23:21:46 A[]
2117	23:21:46 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
2118	23:21:46 A[]
2119	23:21:46 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
2120	23:21:46 A[]
2121	23:21:46 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
2122	23:21:46 A[]
2123	23:21:46 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
2124	23:21:46 A[]
2125	23:21:46 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
2126	23:21:46 A[]
2127	23:21:46 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
2128	23:21:46 A[]
2129	23:21:46 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
2130	23:21:46 A[]
2131	23:21:46 PCI devices found:
2132	23:21:46 0:0.0 1039:648 'PCI0'
2133	23:21:46 0:1.0 1039:1
2134	23:21:46 0:2.0 1039:8 'S962'
2135	23:21:46 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2136	23:21:46 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2137	23:21:46 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
2138	23:21:46 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
2139	23:21:46 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
2140	23:21:46 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2141	23:21:46 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
2142	23:21:46 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2143	23:21:46 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2144	23:21:46 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2145	23:21:46 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2146	23:21:46 Bus detected - 1
2147	23:21:46 ** AcpiInstall Power Device Status = 0
2148	23:21:46 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
2149	23:21:46 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
2150	23:21:46 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
2151	23:21:46 ** AcpiInstall PMTimer Device Status = 0
2152	23:21:46 Total use:94208 unuse:9016 count:1573
2153	23:21:46 Event [_L13] Install GPE0x13
2154	23:21:46 Event [_L0E] Install GPE0xE
2155	23:21:46 Event [_L04] Install GPE0x4
2156	23:21:46 Event [_L07] Install GPE0x7
2157	23:21:46 Event [_L06] Install GPE0x6
2158	23:21:46 Event [_L05] Install GPE0x5
2159	23:21:46 Event [_L08] Install GPE0x8
2160	23:21:46 Event [_L0F] Install GPE0xF
2161	23:21:46 Event [_L0D] Install GPE0xD
2162	23:21:46 Event [_L0B] Install GPE0xB
2163	23:21:46 Event [_L0C] Install GPE0xC
2164	23:21:46 EndScan GPE Status 0
2165	23:21:50 APM: PSD find success. PSD Ftable:F97402BC
2166	23:21:50 APM:Max C state 0
2167	23:21:50 Register Notify 1st FD05929D
2168	23:21:52 FindPCIDevice
2169	23:21:52 Need: B:0x0 D:0x2 F:0x5
2170	23:21:52 Finding APIC0 PIC11 Dev: [IDEC]
2171	23:22:23 Uniaud32: PSD find success. PSD Ftable:F97402BC
2172	23:22:23 FindPCIDevice
2173	23:22:23 Need: B:0x0 D:0x2 F:0x0
2174	23:22:25 APM: End scan power object
2175	23:22:28 ===== Info ========
2176	23:22:28 Int Level 9
2177	23:22:28 In Xrupt F96EFDB8 in arg F96EFDB8
2178	23:22:28 Node
2179	23:22:28 Name [_GPE]
2180	23:22:28 Flags: 0x0
2181	23:22:28 Reg count 2
2182	23:22:28 GPE0x4 Type: Wake
2183	23:22:28 GPE0x5 Type: Wake
2184	23:22:28 GPE0x6 Type: Wake
2185	23:22:28 GPE0x7 Type: Wake
2186	23:22:28 GPE0x8 Type: Wake
2187	23:22:28 GPE0xB Type: Wake
2188	23:22:28 GPE0xC Type: Wake
2189	23:22:28 GPE0xD Type: Wake
2190	23:22:28 GPE0xE Type: Wake
2191	23:22:28 GPE0xF Type: Wake
2192	23:22:28 ===== Info ========
2193	23:22:28 Int Level 9
2194	23:22:28 In Xrupt F96EFDB8 in arg F96EFF30
2195	23:22:28 Node
2196	23:22:28 Name [_GPE]
2197	23:22:28 Flags: 0x0
2198	23:22:28 Reg count 2
2199	23:22:28 GPE0x3 Type: Wake
2200	23:22:35 Event tread
2201	23:22:35 AllocateSuspendMemory s_cpu:0
2202	23:22:35 Alloc s_cpu OK CPU0 2304 bytes at 23
2203	23:22:35 AllocSuspend: CPU0 CR3:1FF000
2204	23:22:35 Status 1Mb alloc 0
2205	10 Jul 23:22:35 acpica$ log is reading
2206	23:22:35 APM: Setting suspend state:3
2207	23:22:35 APM:Max C state 2
2208	10 Jul 23:39:23 acpica$ log is reading
2209	--:--:-- KEE Version 0x10000
2210	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
2211	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
2212	--:--:-- SS Selector fault
2213	23:38:33 CFG: Link [LNKE] IRQ5
2214	23:38:33 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
2215	23:38:33 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
2216	23:38:33 AcpiOsPredefinedOverride: "_REV"
2217	23:38:33 AcpiOsPredefinedOverride: "_OS_"
2218	23:38:33 AcpiOsPredefinedOverride: override to eComStation
2219	23:38:33 AcpiOsPredefinedOverride: "_GL_"
2220	23:38:33 AcpiOsPredefinedOverride: "_OSI"
2221	23:38:33 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
2222	23:38:33 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2223	23:38:33 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2224	23:38:33 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
2225	23:38:33 ACPI: FACS @ 0x7FFF0000/0x40
2226	23:38:33 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2227	23:38:33 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
2228	23:38:33 Table [DSDT]
2229	23:38:33 Table [FACS]
2230	23:38:33 Table [FACP]
2231	23:38:33 Table [APIC]
2232	23:38:33 Local APIC address: FEE00000h
2233	23:38:33 System also has 8259
2234	23:38:33 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
2235	23:38:33 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
2236	23:38:33 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
2237	23:38:33 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
2238	23:38:33 Size of FACDT 244
2239	23:38:33 Type of computer - Unspecified
2240	23:38:33 System vector the SCI interrupt is wired to in 8259 mode. 9
2241	23:38:33 System port address of the SMI Command Port 0x1048
2242	23:38:33 The value to write to SMI_CMD to disable SMI 0x81
2243	23:38:33 The value to write to SMI_CMD to re-enable SMI 0x80
2244	23:38:33 The value to write to SMI_CMD to enter the S4BIOS state 0x0
2245	23:38:33 System port address of the PM1a Event Register Block 1000
2246	23:38:33 System port address of the PM1b Event Register Block 0
2247	23:38:33 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
2248	23:38:33 System port address of the PM1a Control Register Block 1004
2249	23:38:33 System port address of the PM1b Control Register Block 0
2250	23:38:33 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
2251	23:38:33 System port address of the PM2 Control Register Block 1016
2252	23:38:33 Number of bytes decoded by PM2_CNT_BLK 1
2253	23:38:33 System port address of the Power Management Timer Control Register Block 1008
2254	23:38:33 Number of bytes decoded by PM_TMR_BLK (=4) 4
2255	23:38:33 System port address of General-Purpose Event 0 Register Block 1020
2256	23:38:33 System port address of General-Purpose Event 1 Register Block 1030
2257	23:38:33 Number of bytes decoded by GPE0_BLK 0x4
2258	23:38:33 Number of bytes decoded by GPE1_BLK 0x4
2259	23:38:33 Offset within the ACPI general-purpose event model where GPE1 based events start 10
2260	23:38:33 The worst-case hardware latency to enter and exit a C2 state 90 us
2261	23:38:33 The worst-case hardware latency to enter and exit a C3 state 900 us
2262	23:38:33 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
2263	23:38:33 The RTC CMOS RAM index to the day-of-month alarm value 126
2264	23:38:33 The RTC CMOS RAM index to the month of year alarm value 127
2265	23:38:33 IA-PC Boot Architecture Flags 0x0
2266	23:38:33 Fixed feature flags 4A5
2267	23:38:33 The reset register:
2268	23:38:33 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
2269	23:38:33 The value to write to the RESET_REG port to reset the system 0
2270	23:38:33 ***** Throttl Width 0 Offset 1
2271	23:38:33 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
2272	23:38:33 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2273	23:38:33 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2274	23:38:33 ** Scan EC Status = 0 Find 0 EC
2275	23:38:33 ** AcpiInitializeObjects mask:0 Status = 0
2276	23:38:33 Processor [CPU0]
2277	23:38:33 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
2278	23:38:33 Status Evaluate Processor 0x0 AE_OK
2279	23:38:33 Usable:1 Counter:0
2280	23:38:33 CPU id to N:0
2281	23:38:33 ProcId: 0x0
2282	23:38:33 P_BLK: 0x0
2283	23:38:33 P_BLK len: 0x0
2284	23:38:33 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
2285	23:38:33 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
2286	23:38:33 Found bridge "PCI0" BBN is absent status:5
2287	23:38:33 Finding:0 bridges
2288	23:38:33 0:0.0 Class:600 Hdr:80 Bridge H->0
2289	23:38:33 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
2290	23:38:33 0:2.0 Class:601 Hdr:80
2291	23:38:33 0:2.3 Class:C00 Hdr:0
2292	23:38:33 0:2.5 Class:101 Hdr:0
2293	23:38:33 0:2.7 Class:401 Hdr:0
2294	23:38:33 0:3.0 Class:C03 Hdr:80
2295	23:38:33 0:3.1 Class:C03 Hdr:0
2296	23:38:33 0:3.2 Class:C03 Hdr:0
2297	23:38:33 0:3.3 Class:C03 Hdr:0
2298	23:38:33 0:4.0 Class:200 Hdr:0
2299	23:38:33 0:8.0 Class:480 Hdr:0
2300	23:38:33 0:10.0 Class:780 Hdr:0
2301	23:38:33 1:0.0 Class:300 Hdr:0
2302	23:38:33 PCI Bus scan: 2 PCI buses found.
2303	23:38:33 Scan ACPI tree for PCI functions
2304	23:38:33 0:0.0 'PCI0' (F96E5C20)
2305	23:38:33 0:2.5 'IDEC' (F96E5CF8)
2306	23:38:33 0:6.7 'PCI1' (F96E7630)
2307	23:38:33 0:7.7 'PCI2' (F96E76A8)
2308	23:38:33 0:8.7 'PCI3' (F96E7720)
2309	23:38:33 0:10.7 'PCI4' (F96E7798)
2310	23:38:33 0:2.0 'S962' (F96E7810)
2311	23:38:33 0:3.0 'USB0' (F96E7E30)
2312	23:38:33 0:3.1 'USB1' (F96E7EE0)
2313	23:38:33 0:3.2 'USB2' (F96E7F90)
2314	23:38:33 0:3.3 'USB3' (F96E8040)
2315	23:38:33 0:4.0 'MAC0' (F96E80F0)
2316	23:38:33 0:2.7 'AUD0' (F96E8140)
2317	23:38:33 0:2.6 'AMR0' (F96E8190)
2318	23:38:33 Bridges found:
2319	23:38:33 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
2320	23:38:33 0:1.0 class:604 type: 1 Bus 0->1
2321	23:38:33 IRQLinks found:
2322	23:38:33 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
2323	23:38:33 A[]
2324	23:38:33 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
2325	23:38:33 A[]
2326	23:38:33 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
2327	23:38:33 A[]
2328	23:38:33 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
2329	23:38:33 A[]
2330	23:38:33 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
2331	23:38:33 A[]
2332	23:38:33 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
2333	23:38:33 A[]
2334	23:38:33 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
2335	23:38:33 A[]
2336	23:38:33 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
2337	23:38:33 A[]
2338	23:38:33 PCI devices found:
2339	23:38:33 0:0.0 1039:648 'PCI0'
2340	23:38:33 0:1.0 1039:1
2341	23:38:33 0:2.0 1039:8 'S962'
2342	23:38:33 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2343	23:38:33 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2344	23:38:33 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
2345	23:38:33 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
2346	23:38:33 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
2347	23:38:33 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2348	23:38:33 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
2349	23:38:33 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2350	23:38:33 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2351	23:38:33 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2352	23:38:33 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2353	23:38:33 Bus detected - 1
2354	23:38:33 ** AcpiInstall Power Device Status = 0
2355	23:38:33 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
2356	23:38:33 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
2357	23:38:33 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
2358	23:38:33 ** AcpiInstall PMTimer Device Status = 0
2359	23:38:33 Total use:94208 unuse:9016 count:1573
2360	23:38:33 Event [_L13] Install GPE0x13
2361	23:38:33 Event [_L0E] Install GPE0xE
2362	23:38:33 Event [_L04] Install GPE0x4
2363	23:38:33 Event [_L07] Install GPE0x7
2364	23:38:33 Event [_L06] Install GPE0x6
2365	23:38:33 Event [_L05] Install GPE0x5
2366	23:38:33 Event [_L08] Install GPE0x8
2367	23:38:33 Event [_L0F] Install GPE0xF
2368	23:38:33 Event [_L0D] Install GPE0xD
2369	23:38:33 Event [_L0B] Install GPE0xB
2370	23:38:33 Event [_L0C] Install GPE0xC
2371	23:38:33 EndScan GPE Status 0
2372	23:38:37 APM: PSD find success. PSD Ftable:F97402BC
2373	23:38:37 APM:Max C state 0
2374	23:38:37 Register Notify 1st FD05929D
2375	23:38:40 FindPCIDevice
2376	23:38:40 Need: B:0x0 D:0x2 F:0x5
2377	23:38:40 Finding APIC0 PIC11 Dev: [IDEC]
2378	23:39:11 Uniaud32: PSD find success. PSD Ftable:F97402BC
2379	23:39:11 FindPCIDevice
2380	23:39:11 Need: B:0x0 D:0x2 F:0x0
2381	23:39:13 APM: End scan power object
2382	23:39:16 ===== Info ========
2383	23:39:16 Int Level 9
2384	23:39:16 In Xrupt F96EFDB8 in arg F96EFDB8
2385	23:39:16 Node
2386	23:39:16 Name [_GPE]
2387	23:39:16 Flags: 0x0
2388	23:39:16 Reg count 2
2389	23:39:16 GPE0x4 Type: Wake
2390	23:39:16 GPE0x5 Type: Wake
2391	23:39:16 GPE0x6 Type: Wake
2392	23:39:16 GPE0x7 Type: Wake
2393	23:39:16 GPE0x8 Type: Wake
2394	23:39:16 GPE0xB Type: Wake
2395	23:39:16 GPE0xC Type: Wake
2396	23:39:16 GPE0xD Type: Wake
2397	23:39:16 GPE0xE Type: Wake
2398	23:39:16 GPE0xF Type: Wake
2399	23:39:16 ===== Info ========
2400	23:39:16 Int Level 9
2401	23:39:16 In Xrupt F96EFDB8 in arg F96EFF30
2402	23:39:16 Node
2403	23:39:16 Name [_GPE]
2404	23:39:16 Flags: 0x0
2405	23:39:16 Reg count 2
2406	23:39:16 GPE0x3 Type: Wake
2407	23:39:23 Event tread
2408	23:39:23 AllocateSuspendMemory s_cpu:0
2409	23:39:23 Alloc s_cpu OK CPU0 2304 bytes at 17
2410	23:39:23 AllocSuspend: CPU0 CR3:1FF000
2411	23:39:23 Status 1Mb alloc 0
2412	10 Jul 23:39:23 acpica$ log is reading
2413	23:39:23 APM: Setting suspend state:3
2414	23:39:23 APM:Max C state 2
2415	11 Jul 14:33:31 AcpiDaemon LID thread is starting ID 0x4
2416	on 0x10000
2417	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
2418	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
2419	--:--:-- SS Selector fault
2420	14:32:42 CFG: Link [LNKE] IRQ5
2421	14:32:42 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
2422	14:32:42 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
2423	14:32:42 AcpiOsPredefinedOverride: "_REV"
2424	14:32:42 AcpiOsPredefinedOverride: "_OS_"
2425	14:32:42 AcpiOsPredefinedOverride: override to eComStation
2426	14:32:42 AcpiOsPredefinedOverride: "_GL_"
2427	14:32:42 AcpiOsPredefinedOverride: "_OSI"
2428	14:32:42 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
2429	14:32:42 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2430	14:32:42 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2431	14:32:42 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
2432	14:32:42 ACPI: FACS @ 0x7FFF0000/0x40
2433	14:32:42 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2434	14:32:42 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
2435	14:32:42 Table [DSDT]
2436	14:32:42 Table [FACS]
2437	14:32:42 Table [FACP]
2438	14:32:42 Table [APIC]
2439	14:32:42 Local APIC address: FEE00000h
2440	14:32:42 System also has 8259
2441	14:32:42 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
2442	14:32:42 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
2443	14:32:42 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
2444	14:32:42 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
2445	14:32:42 Size of FACDT 244
2446	14:32:42 Type of computer - Unspecified
2447	14:32:42 System vector the SCI interrupt is wired to in 8259 mode. 9
2448	14:32:42 System port address of the SMI Command Port 0x1048
2449	14:32:42 The value to write to SMI_CMD to disable SMI 0x81
2450	14:32:42 The value to write to SMI_CMD to re-enable SMI 0x80
2451	14:32:42 The value to write to SMI_CMD to enter the S4BIOS state 0x0
2452	14:32:42 System port address of the PM1a Event Register Block 1000
2453	14:32:42 System port address of the PM1b Event Register Block 0
2454	14:32:42 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
2455	14:32:42 System port address of the PM1a Control Register Block 1004
2456	14:32:42 System port address of the PM1b Control Register Block 0
2457	14:32:42 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
2458	14:32:42 System port address of the PM2 Control Register Block 1016
2459	14:32:42 Number of bytes decoded by PM2_CNT_BLK 1
2460	14:32:42 System port address of the Power Management Timer Control Register Block 1008
2461	14:32:42 Number of bytes decoded by PM_TMR_BLK (=4) 4
2462	14:32:42 System port address of General-Purpose Event 0 Register Block 1020
2463	14:32:42 System port address of General-Purpose Event 1 Register Block 1030
2464	14:32:42 Number of bytes decoded by GPE0_BLK 0x4
2465	14:32:42 Number of bytes decoded by GPE1_BLK 0x4
2466	14:32:42 Offset within the ACPI general-purpose event model where GPE1 based events start 10
2467	14:32:42 The worst-case hardware latency to enter and exit a C2 state 90 us
2468	14:32:42 The worst-case hardware latency to enter and exit a C3 state 900 us
2469	14:32:42 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
2470	14:32:42 The RTC CMOS RAM index to the day-of-month alarm value 126
2471	14:32:42 The RTC CMOS RAM index to the month of year alarm value 127
2472	14:32:42 IA-PC Boot Architecture Flags 0x0
2473	14:32:42 Fixed feature flags 4A5
2474	14:32:42 The reset register:
2475	14:32:42 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
2476	14:32:42 The value to write to the RESET_REG port to reset the system 0
2477	14:32:42 ***** Throttl Width 0 Offset 1
2478	14:32:42 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
2479	14:32:42 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2480	14:32:42 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2481	14:32:42 ** Scan EC Status = 0 Find 0 EC
2482	14:32:42 ** AcpiInitializeObjects mask:0 Status = 0
2483	14:32:42 Processor [CPU0]
2484	14:32:42 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
2485	14:32:42 Status Evaluate Processor 0x0 AE_OK
2486	14:32:42 Usable:1 Counter:0
2487	14:32:42 CPU id to N:0
2488	14:32:42 ProcId: 0x0
2489	14:32:42 P_BLK: 0x0
2490	14:32:42 P_BLK len: 0x0
2491	14:32:42 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
2492	14:32:42 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
2493	14:32:42 Found bridge "PCI0" BBN is absent status:5
2494	14:32:42 Finding:0 bridges
2495	14:32:42 0:0.0 Class:600 Hdr:80 Bridge H->0
2496	14:32:42 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
2497	14:32:42 0:2.0 Class:601 Hdr:80
2498	14:32:42 0:2.3 Class:C00 Hdr:0
2499	14:32:42 0:2.5 Class:101 Hdr:0
2500	14:32:42 0:2.7 Class:401 Hdr:0
2501	14:32:42 0:3.0 Class:C03 Hdr:80
2502	14:32:42 0:3.1 Class:C03 Hdr:0
2503	14:32:42 0:3.2 Class:C03 Hdr:0
2504	14:32:42 0:3.3 Class:C03 Hdr:0
2505	14:32:42 0:4.0 Class:200 Hdr:0
2506	14:32:42 0:8.0 Class:480 Hdr:0
2507	14:32:42 0:10.0 Class:780 Hdr:0
2508	14:32:42 1:0.0 Class:300 Hdr:0
2509	14:32:42 PCI Bus scan: 2 PCI buses found.
2510	14:32:42 Scan ACPI tree for PCI functions
2511	14:32:42 0:0.0 'PCI0' (F96E5C20)
2512	14:32:42 0:2.5 'IDEC' (F96E5CF8)
2513	14:32:42 0:6.7 'PCI1' (F96E7630)
2514	14:32:42 0:7.7 'PCI2' (F96E76A8)
2515	14:32:42 0:8.7 'PCI3' (F96E7720)
2516	14:32:42 0:10.7 'PCI4' (F96E7798)
2517	14:32:42 0:2.0 'S962' (F96E7810)
2518	14:32:42 0:3.0 'USB0' (F96E7E30)
2519	14:32:42 0:3.1 'USB1' (F96E7EE0)
2520	14:32:42 0:3.2 'USB2' (F96E7F90)
2521	14:32:42 0:3.3 'USB3' (F96E8040)
2522	14:32:42 0:4.0 'MAC0' (F96E80F0)
2523	14:32:42 0:2.7 'AUD0' (F96E8140)
2524	14:32:42 0:2.6 'AMR0' (F96E8190)
2525	14:32:42 Bridges found:
2526	14:32:42 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
2527	14:32:42 0:1.0 class:604 type: 1 Bus 0->1
2528	14:32:42 IRQLinks found:
2529	14:32:42 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
2530	14:32:42 A[]
2531	14:32:42 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
2532	14:32:42 A[]
2533	14:32:42 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
2534	14:32:42 A[]
2535	14:32:42 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
2536	14:32:42 A[]
2537	14:32:42 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
2538	14:32:42 A[]
2539	14:32:42 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
2540	14:32:42 A[]
2541	14:32:42 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
2542	14:32:42 A[]
2543	14:32:42 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
2544	14:32:42 A[]
2545	14:32:42 PCI devices found:
2546	14:32:42 0:0.0 1039:648 'PCI0'
2547	14:32:42 0:1.0 1039:1
2548	14:32:42 0:2.0 1039:8 'S962'
2549	14:32:42 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2550	14:32:42 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2551	14:32:42 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
2552	14:32:42 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
2553	14:32:42 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
2554	14:32:42 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2555	14:32:42 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
2556	14:32:42 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2557	14:32:42 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2558	14:32:42 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2559	14:32:42 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2560	14:32:42 Bus detected - 1
2561	14:32:42 ** AcpiInstall Power Device Status = 0
2562	14:32:42 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
2563	14:32:42 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
2564	14:32:42 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
2565	14:32:42 ** AcpiInstall PMTimer Device Status = 0
2566	14:32:42 Total use:94208 unuse:9016 count:1573
2567	14:32:42 Event [_L13] Install GPE0x13
2568	14:32:42 Event [_L0E] Install GPE0xE
2569	14:32:42 Event [_L04] Install GPE0x4
2570	14:32:42 Event [_L07] Install GPE0x7
2571	14:32:42 Event [_L06] Install GPE0x6
2572	14:32:42 Event [_L05] Install GPE0x5
2573	14:32:42 Event [_L08] Install GPE0x8
2574	14:32:42 Event [_L0F] Install GPE0xF
2575	14:32:42 Event [_L0D] Install GPE0xD
2576	14:32:42 Event [_L0B] Install GPE0xB
2577	14:32:42 Event [_L0C] Install GPE0xC
2578	14:32:42 EndScan GPE Status 0
2579	14:32:46 APM: PSD find success. PSD Ftable:F97402BC
2580	14:32:46 APM:Max C state 0
2581	14:32:46 Register Notify 1st FD05929D
2582	14:32:49 FindPCIDevice
2583	14:32:49 Need: B:0x0 D:0x2 F:0x5
2584	14:32:49 Finding APIC0 PIC11 Dev: [IDEC]
2585	14:33:20 Uniaud32: PSD find success. PSD Ftable:F97402BC
2586	14:33:20 FindPCIDevice
2587	14:33:20 Need: B:0x0 D:0x2 F:0x0
2588	14:33:22 APM: End scan power object
2589	14:33:25 ===== Info ========
2590	14:33:25 Int Level 9
2591	14:33:25 In Xrupt F96EFDB8 in arg F96EFDB8
2592	14:33:25 Node
2593	14:33:25 Name [_GPE]
2594	14:33:25 Flags: 0x0
2595	14:33:25 Reg count 2
2596	14:33:25 GPE0x4 Type: Wake
2597	14:33:25 GPE0x5 Type: Wake
2598	14:33:25 GPE0x6 Type: Wake
2599	14:33:25 GPE0x7 Type: Wake
2600	14:33:25 GPE0x8 Type: Wake
2601	14:33:25 GPE0xB Type: Wake
2602	14:33:25 GPE0xC Type: Wake
2603	14:33:25 GPE0xD Type: Wake
2604	14:33:25 GPE0xE Type: Wake
2605	14:33:25 GPE0xF Type: Wake
2606	14:33:25 ===== Info ========
2607	14:33:25 Int Level 9
2608	14:33:25 In Xrupt F96EFDB8 in arg F96EFF30
2609	14:33:25 Node
2610	14:33:25 Name [_GPE]
2611	14:33:25 Flags: 0x0
2612	14:33:25 Reg count 2
2613	14:33:25 GPE0x3 Type: Wake
2614	14:33:31 Event tread
2615	14:33:31 AllocateSuspendMemory s_cpu:0
2616	14:33:31 Alloc s_cpu OK CPU0 2304 bytes at 1F
2617	14:33:31 AllocSuspend: CPU0 CR3:1FF000
2618	14:33:31 Status 1Mb alloc 0
2619	11 Jul 14:33:31 acpica$ log is reading
2620	14:33:31 APM: Setting suspend state:3
2621	14:33:31 APM:Max C state 2
2622	11 Jul 18:06:57 AcpiDaemon LID device not finding, finish thread
2623	00
2624	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
2625	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
2626	--:--:-- SS Selector fault
2627	18:6:8 CFG: Link [LNKE] IRQ5
2628	18:6:8 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
2629	18:6:8 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
2630	18:6:8 AcpiOsPredefinedOverride: "_REV"
2631	18:6:8 AcpiOsPredefinedOverride: "_OS_"
2632	18:6:8 AcpiOsPredefinedOverride: override to eComStation
2633	18:6:8 AcpiOsPredefinedOverride: "_GL_"
2634	18:6:8 AcpiOsPredefinedOverride: "_OSI"
2635	18:6:8 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
2636	18:6:8 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2637	18:6:8 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2638	18:6:8 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
2639	18:6:8 ACPI: FACS @ 0x7FFF0000/0x40
2640	18:6:8 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2641	18:6:8 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
2642	18:6:8 Table [DSDT]
2643	18:6:8 Table [FACS]
2644	18:6:8 Table [FACP]
2645	18:6:8 Table [APIC]
2646	18:6:8 Local APIC address: FEE00000h
2647	18:6:8 System also has 8259
2648	18:6:8 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
2649	18:6:8 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
2650	18:6:8 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
2651	18:6:8 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
2652	18:6:8 Size of FACDT 244
2653	18:6:8 Type of computer - Unspecified
2654	18:6:8 System vector the SCI interrupt is wired to in 8259 mode. 9
2655	18:6:8 System port address of the SMI Command Port 0x1048
2656	18:6:8 The value to write to SMI_CMD to disable SMI 0x81
2657	18:6:8 The value to write to SMI_CMD to re-enable SMI 0x80
2658	18:6:8 The value to write to SMI_CMD to enter the S4BIOS state 0x0
2659	18:6:8 System port address of the PM1a Event Register Block 1000
2660	18:6:8 System port address of the PM1b Event Register Block 0
2661	18:6:8 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
2662	18:6:8 System port address of the PM1a Control Register Block 1004
2663	18:6:8 System port address of the PM1b Control Register Block 0
2664	18:6:8 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
2665	18:6:8 System port address of the PM2 Control Register Block 1016
2666	18:6:8 Number of bytes decoded by PM2_CNT_BLK 1
2667	18:6:8 System port address of the Power Management Timer Control Register Block 1008
2668	18:6:8 Number of bytes decoded by PM_TMR_BLK (=4) 4
2669	18:6:8 System port address of General-Purpose Event 0 Register Block 1020
2670	18:6:8 System port address of General-Purpose Event 1 Register Block 1030
2671	18:6:8 Number of bytes decoded by GPE0_BLK 0x4
2672	18:6:8 Number of bytes decoded by GPE1_BLK 0x4
2673	18:6:8 Offset within the ACPI general-purpose event model where GPE1 based events start 10
2674	18:6:8 The worst-case hardware latency to enter and exit a C2 state 90 us
2675	18:6:8 The worst-case hardware latency to enter and exit a C3 state 900 us
2676	18:6:8 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
2677	18:6:8 The RTC CMOS RAM index to the day-of-month alarm value 126
2678	18:6:8 The RTC CMOS RAM index to the month of year alarm value 127
2679	18:6:8 IA-PC Boot Architecture Flags 0x0
2680	18:6:8 Fixed feature flags 4A5
2681	18:6:8 The reset register:
2682	18:6:8 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
2683	18:6:8 The value to write to the RESET_REG port to reset the system 0
2684	18:6:8 ***** Throttl Width 0 Offset 1
2685	18:6:8 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
2686	18:6:8 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2687	18:6:8 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2688	18:6:8 ** Scan EC Status = 0 Find 0 EC
2689	18:6:8 ** AcpiInitializeObjects mask:0 Status = 0
2690	18:6:8 Processor [CPU0]
2691	18:6:8 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
2692	18:6:8 Status Evaluate Processor 0x0 AE_OK
2693	18:6:8 Usable:1 Counter:0
2694	18:6:8 CPU id to N:0
2695	18:6:8 ProcId: 0x0
2696	18:6:8 P_BLK: 0x0
2697	18:6:8 P_BLK len: 0x0
2698	18:6:8 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
2699	18:6:8 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
2700	18:6:8 Found bridge "PCI0" BBN is absent status:5
2701	18:6:8 Finding:0 bridges
2702	18:6:8 0:0.0 Class:600 Hdr:80 Bridge H->0
2703	18:6:8 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
2704	18:6:8 0:2.0 Class:601 Hdr:80
2705	18:6:8 0:2.3 Class:C00 Hdr:0
2706	18:6:8 0:2.5 Class:101 Hdr:0
2707	18:6:8 0:2.7 Class:401 Hdr:0
2708	18:6:8 0:3.0 Class:C03 Hdr:80
2709	18:6:8 0:3.1 Class:C03 Hdr:0
2710	18:6:8 0:3.2 Class:C03 Hdr:0
2711	18:6:8 0:3.3 Class:C03 Hdr:0
2712	18:6:8 0:4.0 Class:200 Hdr:0
2713	18:6:8 0:8.0 Class:480 Hdr:0
2714	18:6:8 0:10.0 Class:780 Hdr:0
2715	18:6:8 1:0.0 Class:300 Hdr:0
2716	18:6:8 PCI Bus scan: 2 PCI buses found.
2717	18:6:8 Scan ACPI tree for PCI functions
2718	18:6:8 0:0.0 'PCI0' (F96E5C20)
2719	18:6:8 0:2.5 'IDEC' (F96E5CF8)
2720	18:6:8 0:6.7 'PCI1' (F96E7630)
2721	18:6:8 0:7.7 'PCI2' (F96E76A8)
2722	18:6:8 0:8.7 'PCI3' (F96E7720)
2723	18:6:8 0:10.7 'PCI4' (F96E7798)
2724	18:6:8 0:2.0 'S962' (F96E7810)
2725	18:6:8 0:3.0 'USB0' (F96E7E30)
2726	18:6:8 0:3.1 'USB1' (F96E7EE0)
2727	18:6:8 0:3.2 'USB2' (F96E7F90)
2728	18:6:8 0:3.3 'USB3' (F96E8040)
2729	18:6:8 0:4.0 'MAC0' (F96E80F0)
2730	18:6:8 0:2.7 'AUD0' (F96E8140)
2731	18:6:8 0:2.6 'AMR0' (F96E8190)
2732	18:6:8 Bridges found:
2733	18:6:8 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
2734	18:6:8 0:1.0 class:604 type: 1 Bus 0->1
2735	18:6:8 IRQLinks found:
2736	18:6:8 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
2737	18:6:8 A[]
2738	18:6:8 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
2739	18:6:8 A[]
2740	18:6:8 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
2741	18:6:8 A[]
2742	18:6:8 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
2743	18:6:8 A[]
2744	18:6:8 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
2745	18:6:8 A[]
2746	18:6:8 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
2747	18:6:8 A[]
2748	18:6:8 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
2749	18:6:8 A[]
2750	18:6:8 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
2751	18:6:8 A[]
2752	18:6:8 PCI devices found:
2753	18:6:8 0:0.0 1039:648 'PCI0'
2754	18:6:8 0:1.0 1039:1
2755	18:6:8 0:2.0 1039:8 'S962'
2756	18:6:8 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2757	18:6:8 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2758	18:6:8 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
2759	18:6:8 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
2760	18:6:8 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
2761	18:6:8 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2762	18:6:8 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
2763	18:6:8 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2764	18:6:8 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2765	18:6:8 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2766	18:6:8 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2767	18:6:8 Bus detected - 1
2768	18:6:8 ** AcpiInstall Power Device Status = 0
2769	18:6:8 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
2770	18:6:8 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
2771	18:6:8 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
2772	18:6:8 ** AcpiInstall PMTimer Device Status = 0
2773	18:6:8 Total use:94208 unuse:9016 count:1573
2774	18:6:8 Event [_L13] Install GPE0x13
2775	18:6:8 Event [_L0E] Install GPE0xE
2776	18:6:8 Event [_L04] Install GPE0x4
2777	18:6:8 Event [_L07] Install GPE0x7
2778	18:6:8 Event [_L06] Install GPE0x6
2779	18:6:8 Event [_L05] Install GPE0x5
2780	18:6:8 Event [_L08] Install GPE0x8
2781	18:6:8 Event [_L0F] Install GPE0xF
2782	18:6:8 Event [_L0D] Install GPE0xD
2783	18:6:8 Event [_L0B] Install GPE0xB
2784	18:6:8 Event [_L0C] Install GPE0xC
2785	18:6:8 EndScan GPE Status 0
2786	18:6:12 APM: PSD find success. PSD Ftable:F97402BC
2787	18:6:12 APM:Max C state 0
2788	18:6:12 Register Notify 1st FD05929D
2789	18:6:14 FindPCIDevice
2790	18:6:14 Need: B:0x0 D:0x2 F:0x5
2791	18:6:14 Finding APIC0 PIC11 Dev: [IDEC]
2792	18:6:45 Uniaud32: PSD find success. PSD Ftable:F97402BC
2793	18:6:45 FindPCIDevice
2794	18:6:45 Need: B:0x0 D:0x2 F:0x0
2795	18:6:47 APM: End scan power object
2796	18:6:50 ===== Info ========
2797	18:6:50 Int Level 9
2798	18:6:50 In Xrupt F96EFDB8 in arg F96EFDB8
2799	18:6:50 Node
2800	18:6:50 Name [_GPE]
2801	18:6:50 Flags: 0x0
2802	18:6:50 Reg count 2
2803	18:6:50 GPE0x4 Type: Wake
2804	18:6:50 GPE0x5 Type: Wake
2805	18:6:50 GPE0x6 Type: Wake
2806	18:6:50 GPE0x7 Type: Wake
2807	18:6:50 GPE0x8 Type: Wake
2808	18:6:50 GPE0xB Type: Wake
2809	18:6:50 GPE0xC Type: Wake
2810	18:6:50 GPE0xD Type: Wake
2811	18:6:50 GPE0xE Type: Wake
2812	18:6:50 GPE0xF Type: Wake
2813	18:6:50 ===== Info ========
2814	18:6:50 Int Level 9
2815	18:6:50 In Xrupt F96EFDB8 in arg F96EFF30
2816	18:6:50 Node
2817	18:6:50 Name [_GPE]
2818	18:6:50 Flags: 0x0
2819	18:6:50 Reg count 2
2820	18:6:50 GPE0x3 Type: Wake
2821	18:6:57 Event tread
2822	18:6:57 AllocateSuspendMemory s_cpu:0
2823	18:6:57 Alloc s_cpu OK CPU0 2304 bytes at 39
2824	18:6:57 AllocSuspend: CPU0 CR3:1FF000
2825	18:6:57 Status 1Mb alloc 0
2826	11 Jul 18:06:57 acpica$ log is reading
2827	18:6:57 APM: Setting suspend state:3
2828	18:6:57 APM:Max C state 2
2829	12 Jul 13:08:18 AcpiDaemon LID thread is starting ID 0x4
2830	on 0x10000
2831	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
2832	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
2833	--:--:-- SS Selector fault
2834	13:7:31 CFG: Link [LNKE] IRQ5
2835	13:7:31 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
2836	13:7:31 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
2837	13:7:31 AcpiOsPredefinedOverride: "_REV"
2838	13:7:31 AcpiOsPredefinedOverride: "_OS_"
2839	13:7:31 AcpiOsPredefinedOverride: override to eComStation
2840	13:7:31 AcpiOsPredefinedOverride: "_GL_"
2841	13:7:31 AcpiOsPredefinedOverride: "_OSI"
2842	13:7:31 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
2843	13:7:31 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2844	13:7:31 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2845	13:7:31 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
2846	13:7:31 ACPI: FACS @ 0x7FFF0000/0x40
2847	13:7:31 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
2848	13:7:31 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
2849	13:7:31 Table [DSDT]
2850	13:7:31 Table [FACS]
2851	13:7:31 Table [FACP]
2852	13:7:31 Table [APIC]
2853	13:7:31 Local APIC address: FEE00000h
2854	13:7:31 System also has 8259
2855	13:7:31 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
2856	13:7:31 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
2857	13:7:31 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
2858	13:7:31 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
2859	13:7:31 Size of FACDT 244
2860	13:7:31 Type of computer - Unspecified
2861	13:7:31 System vector the SCI interrupt is wired to in 8259 mode. 9
2862	13:7:31 System port address of the SMI Command Port 0x1048
2863	13:7:31 The value to write to SMI_CMD to disable SMI 0x81
2864	13:7:31 The value to write to SMI_CMD to re-enable SMI 0x80
2865	13:7:31 The value to write to SMI_CMD to enter the S4BIOS state 0x0
2866	13:7:31 System port address of the PM1a Event Register Block 1000
2867	13:7:31 System port address of the PM1b Event Register Block 0
2868	13:7:31 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
2869	13:7:31 System port address of the PM1a Control Register Block 1004
2870	13:7:31 System port address of the PM1b Control Register Block 0
2871	13:7:31 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
2872	13:7:31 System port address of the PM2 Control Register Block 1016
2873	13:7:31 Number of bytes decoded by PM2_CNT_BLK 1
2874	13:7:31 System port address of the Power Management Timer Control Register Block 1008
2875	13:7:31 Number of bytes decoded by PM_TMR_BLK (=4) 4
2876	13:7:31 System port address of General-Purpose Event 0 Register Block 1020
2877	13:7:31 System port address of General-Purpose Event 1 Register Block 1030
2878	13:7:31 Number of bytes decoded by GPE0_BLK 0x4
2879	13:7:31 Number of bytes decoded by GPE1_BLK 0x4
2880	13:7:31 Offset within the ACPI general-purpose event model where GPE1 based events start 10
2881	13:7:31 The worst-case hardware latency to enter and exit a C2 state 90 us
2882	13:7:31 The worst-case hardware latency to enter and exit a C3 state 900 us
2883	13:7:31 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
2884	13:7:31 The RTC CMOS RAM index to the day-of-month alarm value 126
2885	13:7:31 The RTC CMOS RAM index to the month of year alarm value 127
2886	13:7:31 IA-PC Boot Architecture Flags 0x0
2887	13:7:31 Fixed feature flags 4A5
2888	13:7:31 The reset register:
2889	13:7:31 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
2890	13:7:31 The value to write to the RESET_REG port to reset the system 0
2891	13:7:31 ***** Throttl Width 0 Offset 1
2892	13:7:31 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
2893	13:7:31 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2894	13:7:31 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
2895	13:7:31 ** Scan EC Status = 0 Find 0 EC
2896	13:7:31 ** AcpiInitializeObjects mask:0 Status = 0
2897	13:7:31 Processor [CPU0]
2898	13:7:31 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
2899	13:7:31 Status Evaluate Processor 0x0 AE_OK
2900	13:7:31 Usable:1 Counter:0
2901	13:7:31 CPU id to N:0
2902	13:7:31 ProcId: 0x0
2903	13:7:31 P_BLK: 0x0
2904	13:7:31 P_BLK len: 0x0
2905	13:7:31 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
2906	13:7:31 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
2907	13:7:31 Found bridge "PCI0" BBN is absent status:5
2908	13:7:31 Finding:0 bridges
2909	13:7:31 0:0.0 Class:600 Hdr:80 Bridge H->0
2910	13:7:31 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
2911	13:7:31 0:2.0 Class:601 Hdr:80
2912	13:7:31 0:2.3 Class:C00 Hdr:0
2913	13:7:31 0:2.5 Class:101 Hdr:0
2914	13:7:31 0:2.7 Class:401 Hdr:0
2915	13:7:31 0:3.0 Class:C03 Hdr:80
2916	13:7:31 0:3.1 Class:C03 Hdr:0
2917	13:7:31 0:3.2 Class:C03 Hdr:0
2918	13:7:31 0:3.3 Class:C03 Hdr:0
2919	13:7:31 0:4.0 Class:200 Hdr:0
2920	13:7:31 0:8.0 Class:480 Hdr:0
2921	13:7:31 0:10.0 Class:780 Hdr:0
2922	13:7:31 1:0.0 Class:300 Hdr:0
2923	13:7:31 PCI Bus scan: 2 PCI buses found.
2924	13:7:31 Scan ACPI tree for PCI functions
2925	13:7:31 0:0.0 'PCI0' (F96E5C20)
2926	13:7:31 0:2.5 'IDEC' (F96E5CF8)
2927	13:7:31 0:6.7 'PCI1' (F96E7630)
2928	13:7:31 0:7.7 'PCI2' (F96E76A8)
2929	13:7:31 0:8.7 'PCI3' (F96E7720)
2930	13:7:31 0:10.7 'PCI4' (F96E7798)
2931	13:7:31 0:2.0 'S962' (F96E7810)
2932	13:7:31 0:3.0 'USB0' (F96E7E30)
2933	13:7:31 0:3.1 'USB1' (F96E7EE0)
2934	13:7:31 0:3.2 'USB2' (F96E7F90)
2935	13:7:31 0:3.3 'USB3' (F96E8040)
2936	13:7:31 0:4.0 'MAC0' (F96E80F0)
2937	13:7:31 0:2.7 'AUD0' (F96E8140)
2938	13:7:31 0:2.6 'AMR0' (F96E8190)
2939	13:7:31 Bridges found:
2940	13:7:31 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
2941	13:7:31 0:1.0 class:604 type: 1 Bus 0->1
2942	13:7:31 IRQLinks found:
2943	13:7:31 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
2944	13:7:31 A[]
2945	13:7:31 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
2946	13:7:31 A[]
2947	13:7:31 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
2948	13:7:31 A[]
2949	13:7:31 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
2950	13:7:31 A[]
2951	13:7:31 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
2952	13:7:31 A[]
2953	13:7:31 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
2954	13:7:31 A[]
2955	13:7:31 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
2956	13:7:31 A[]
2957	13:7:31 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
2958	13:7:31 A[]
2959	13:7:31 PCI devices found:
2960	13:7:31 0:0.0 1039:648 'PCI0'
2961	13:7:31 0:1.0 1039:1
2962	13:7:31 0:2.0 1039:8 'S962'
2963	13:7:31 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2964	13:7:31 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2965	13:7:31 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
2966	13:7:31 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
2967	13:7:31 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
2968	13:7:31 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2969	13:7:31 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
2970	13:7:31 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2971	13:7:31 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
2972	13:7:31 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
2973	13:7:31 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2974	13:7:31 Bus detected - 1
2975	13:7:31 ** AcpiInstall Power Device Status = 0
2976	13:7:31 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
2977	13:7:31 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
2978	13:7:31 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
2979	13:7:31 ** AcpiInstall PMTimer Device Status = 0
2980	13:7:31 Total use:94208 unuse:9016 count:1573
2981	13:7:31 Event [_L13] Install GPE0x13
2982	13:7:31 Event [_L0E] Install GPE0xE
2983	13:7:31 Event [_L04] Install GPE0x4
2984	13:7:31 Event [_L07] Install GPE0x7
2985	13:7:31 Event [_L06] Install GPE0x6
2986	13:7:31 Event [_L05] Install GPE0x5
2987	13:7:31 Event [_L08] Install GPE0x8
2988	13:7:31 Event [_L0F] Install GPE0xF
2989	13:7:31 Event [_L0D] Install GPE0xD
2990	13:7:31 Event [_L0B] Install GPE0xB
2991	13:7:31 Event [_L0C] Install GPE0xC
2992	13:7:31 EndScan GPE Status 0
2993	13:7:35 APM: PSD find success. PSD Ftable:F97402BC
2994	13:7:35 APM:Max C state 0
2995	13:7:35 Register Notify 1st FD05929D
2996	13:7:37 FindPCIDevice
2997	13:7:37 Need: B:0x0 D:0x2 F:0x5
2998	13:7:37 Finding APIC0 PIC11 Dev: [IDEC]
2999	13:8:8 Uniaud32: PSD find success. PSD Ftable:F97402BC
3000	13:8:8 FindPCIDevice
3001	13:8:8 Need: B:0x0 D:0x2 F:0x0
3002	13:8:10 APM: End scan power object
3003	13:8:13 ===== Info ========
3004	13:8:13 Int Level 9
3005	13:8:13 In Xrupt F96EFDB8 in arg F96EFDB8
3006	13:8:13 Node
3007	13:8:13 Name [_GPE]
3008	13:8:13 Flags: 0x0
3009	13:8:13 Reg count 2
3010	13:8:13 GPE0x4 Type: Wake
3011	13:8:13 GPE0x5 Type: Wake
3012	13:8:13 GPE0x6 Type: Wake
3013	13:8:13 GPE0x7 Type: Wake
3014	13:8:13 GPE0x8 Type: Wake
3015	13:8:13 GPE0xB Type: Wake
3016	13:8:13 GPE0xC Type: Wake
3017	13:8:13 GPE0xD Type: Wake
3018	13:8:13 GPE0xE Type: Wake
3019	13:8:13 GPE0xF Type: Wake
3020	13:8:13 ===== Info ========
3021	13:8:13 Int Level 9
3022	13:8:13 In Xrupt F96EFDB8 in arg F96EFF30
3023	13:8:13 Node
3024	13:8:13 Name [_GPE]
3025	13:8:13 Flags: 0x0
3026	13:8:13 Reg count 2
3027	13:8:13 GPE0x3 Type: Wake
3028	13:8:18 Event tread
3029	13:8:18 AllocateSuspendMemory s_cpu:0
3030	13:8:18 Alloc s_cpu OK CPU0 2304 bytes at 12
3031	13:8:18 AllocSuspend: CPU0 CR3:1FF000
3032	13:8:18 Status 1Mb alloc 0
3033	12 Jul 13:08:18 acpica$ log is reading
3034	13:8:18 APM: Setting suspend state:3
3035	13:8:18 APM:Max C state 2
3036	21 Jul 16:23:46 AcpiDaemon LID thread is starting ID 0x4
3037	on 0x10000
3038	--:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
3039	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
3040	--:--:-- SS Selector fault
3041	16:22:59 CFG: Link [LNKE] IRQ5
3042	16:22:59 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
3043	16:22:59 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
3044	16:22:59 AcpiOsPredefinedOverride: "_REV"
3045	16:22:59 AcpiOsPredefinedOverride: "_OS_"
3046	16:22:59 AcpiOsPredefinedOverride: override to eComStation
3047	16:22:59 AcpiOsPredefinedOverride: "_GL_"
3048	16:22:59 AcpiOsPredefinedOverride: "_OSI"
3049	16:22:59 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
3050	16:22:59 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3051	16:22:59 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3052	16:22:59 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
3053	16:22:59 ACPI: FACS @ 0x7FFF0000/0x40
3054	16:22:59 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3055	16:22:59 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
3056	16:22:59 Table [DSDT]
3057	16:22:59 Table [FACS]
3058	16:22:59 Table [FACP]
3059	16:22:59 Table [APIC]
3060	16:22:59 Local APIC address: FEE00000h
3061	16:22:59 System also has 8259
3062	16:22:59 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
3063	16:22:59 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
3064	16:22:59 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
3065	16:22:59 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
3066	16:22:59 Size of FACDT 244
3067	16:22:59 Type of computer - Unspecified
3068	16:22:59 System vector the SCI interrupt is wired to in 8259 mode. 9
3069	16:22:59 System port address of the SMI Command Port 0x1048
3070	16:22:59 The value to write to SMI_CMD to disable SMI 0x81
3071	16:22:59 The value to write to SMI_CMD to re-enable SMI 0x80
3072	16:22:59 The value to write to SMI_CMD to enter the S4BIOS state 0x0
3073	16:22:59 System port address of the PM1a Event Register Block 1000
3074	16:22:59 System port address of the PM1b Event Register Block 0
3075	16:22:59 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
3076	16:22:59 System port address of the PM1a Control Register Block 1004
3077	16:22:59 System port address of the PM1b Control Register Block 0
3078	16:22:59 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
3079	16:22:59 System port address of the PM2 Control Register Block 1016
3080	16:22:59 Number of bytes decoded by PM2_CNT_BLK 1
3081	16:22:59 System port address of the Power Management Timer Control Register Block 1008
3082	16:22:59 Number of bytes decoded by PM_TMR_BLK (=4) 4
3083	16:22:59 System port address of General-Purpose Event 0 Register Block 1020
3084	16:22:59 System port address of General-Purpose Event 1 Register Block 1030
3085	16:22:59 Number of bytes decoded by GPE0_BLK 0x4
3086	16:22:59 Number of bytes decoded by GPE1_BLK 0x4
3087	16:22:59 Offset within the ACPI general-purpose event model where GPE1 based events start 10
3088	16:22:59 The worst-case hardware latency to enter and exit a C2 state 90 us
3089	16:22:59 The worst-case hardware latency to enter and exit a C3 state 900 us
3090	16:22:59 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
3091	16:22:59 The RTC CMOS RAM index to the day-of-month alarm value 126
3092	16:22:59 The RTC CMOS RAM index to the month of year alarm value 127
3093	16:22:59 IA-PC Boot Architecture Flags 0x0
3094	16:22:59 Fixed feature flags 4A5
3095	16:22:59 The reset register:
3096	16:22:59 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
3097	16:22:59 The value to write to the RESET_REG port to reset the system 0
3098	16:22:59 ***** Throttl Width 0 Offset 1
3099	16:22:59 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
3100	16:22:59 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3101	16:22:59 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3102	16:22:59 ** Scan EC Status = 0 Find 0 EC
3103	16:22:59 ** AcpiInitializeObjects mask:0 Status = 0
3104	16:22:59 Processor [CPU0]
3105	16:22:59 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
3106	16:22:59 Status Evaluate Processor 0x0 AE_OK
3107	16:22:59 Usable:1 Counter:0
3108	16:22:59 CPU id to N:0
3109	16:22:59 ProcId: 0x0
3110	16:22:59 P_BLK: 0x0
3111	16:22:59 P_BLK len: 0x0
3112	16:22:59 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
3113	16:22:59 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
3114	16:22:59 Found bridge "PCI0" BBN is absent status:5
3115	16:22:59 Finding:0 bridges
3116	16:22:59 0:0.0 Class:600 Hdr:80 Bridge H->0
3117	16:22:59 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
3118	16:22:59 0:2.0 Class:601 Hdr:80
3119	16:22:59 0:2.3 Class:C00 Hdr:0
3120	16:22:59 0:2.5 Class:101 Hdr:0
3121	16:22:59 0:2.7 Class:401 Hdr:0
3122	16:22:59 0:3.0 Class:C03 Hdr:80
3123	16:22:59 0:3.1 Class:C03 Hdr:0
3124	16:22:59 0:3.2 Class:C03 Hdr:0
3125	16:22:59 0:3.3 Class:C03 Hdr:0
3126	16:22:59 0:4.0 Class:200 Hdr:0
3127	16:22:59 0:8.0 Class:480 Hdr:0
3128	16:22:59 0:10.0 Class:780 Hdr:0
3129	16:22:59 1:0.0 Class:300 Hdr:0
3130	16:22:59 PCI Bus scan: 2 PCI buses found.
3131	16:22:59 Scan ACPI tree for PCI functions
3132	16:22:59 0:0.0 'PCI0' (F96E5C20)
3133	16:22:59 0:2.5 'IDEC' (F96E5CF8)
3134	16:22:59 0:6.7 'PCI1' (F96E7630)
3135	16:22:59 0:7.7 'PCI2' (F96E76A8)
3136	16:22:59 0:8.7 'PCI3' (F96E7720)
3137	16:22:59 0:10.7 'PCI4' (F96E7798)
3138	16:22:59 0:2.0 'S962' (F96E7810)
3139	16:22:59 0:3.0 'USB0' (F96E7E30)
3140	16:22:59 0:3.1 'USB1' (F96E7EE0)
3141	16:22:59 0:3.2 'USB2' (F96E7F90)
3142	16:22:59 0:3.3 'USB3' (F96E8040)
3143	16:22:59 0:4.0 'MAC0' (F96E80F0)
3144	16:22:59 0:2.7 'AUD0' (F96E8140)
3145	16:22:59 0:2.6 'AMR0' (F96E8190)
3146	16:22:59 Bridges found:
3147	16:22:59 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT
3148	16:22:59 0:1.0 class:604 type: 1 Bus 0->1
3149	16:22:59 IRQLinks found:
3150	16:22:59 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
3151	16:22:59 A[]
3152	16:22:59 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7
3153	16:22:59 A[]
3154	16:22:59 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0
3155	16:22:59 A[]
3156	16:22:59 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5
3157	16:22:59 A[]
3158	16:22:59 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
3159	16:22:59 A[]
3160	16:22:59 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
3161	16:22:59 A[]
3162	16:22:59 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
3163	16:22:59 A[]
3164	16:22:59 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3
3165	16:22:59 A[]
3166	16:22:59 PCI devices found:
3167	16:22:59 0:0.0 1039:648 'PCI0'
3168	16:22:59 0:1.0 1039:1
3169	16:22:59 0:2.0 1039:8 'S962'
3170	16:22:59 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
3171	16:22:59 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
3172	16:22:59 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18
3173	16:22:59 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20
3174	16:22:59 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21
3175	16:22:59 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
3176	16:22:59 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23
3177	16:22:59 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19
3178	16:22:59 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19
3179	16:22:59 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17
3180	16:22:59 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16
3181	16:22:59 Bus detected - 1
3182	16:22:59 ** AcpiInstall Power Device Status = 0
3183	16:22:59 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
3184	16:22:59 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
3185	16:22:59 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
3186	16:22:59 ** AcpiInstall PMTimer Device Status = 0
3187	16:22:59 Total use:94208 unuse:9016 count:1573
3188	16:22:59 Event [_L13] Install GPE0x13
3189	16:22:59 Event [_L0E] Install GPE0xE
3190	16:22:59 Event [_L04] Install GPE0x4
3191	16:22:59 Event [_L07] Install GPE0x7
3192	16:22:59 Event [_L06] Install GPE0x6
3193	16:22:59 Event [_L05] Install GPE0x5
3194	16:22:59 Event [_L08] Install GPE0x8
3195	16:22:59 Event [_L0F] Install GPE0xF
3196	16:22:59 Event [_L0D] Install GPE0xD
3197	16:22:59 Event [_L0B] Install GPE0xB
3198	16:22:59 Event [_L0C] Install GPE0xC
3199	16:22:59 EndScan GPE Status 0
3200	16:23:3 APM: PSD find success. PSD Ftable:F97402BC
3201	16:23:3 APM:Max C state 0
3202	16:23:3 Register Notify 1st FD05929D
3203	16:23:6 FindPCIDevice
3204	16:23:6 Need: B:0x0 D:0x2 F:0x5
3205	16:23:6 Finding APIC0 PIC11 Dev: [IDEC]
3206	16:23:36 Uniaud32: PSD find success. PSD Ftable:F97402BC
3207	16:23:36 FindPCIDevice
3208	16:23:36 Need: B:0x0 D:0x2 F:0x0
3209	16:23:38 APM: End scan power object
3210	16:23:41 ===== Info ========
3211	16:23:41 Int Level 9
3212	16:23:41 In Xrupt F96EFDB8 in arg F96EFDB8
3213	16:23:41 Node
3214	16:23:41 Name [_GPE]
3215	16:23:41 Flags: 0x0
3216	16:23:41 Reg count 2
3217	16:23:41 GPE0x4 Type: Wake
3218	16:23:41 GPE0x5 Type: Wake
3219	16:23:41 GPE0x6 Type: Wake
3220	16:23:41 GPE0x7 Type: Wake
3221	16:23:41 GPE0x8 Type: Wake
3222	16:23:41 GPE0xB Type: Wake
3223	16:23:41 GPE0xC Type: Wake
3224	16:23:41 GPE0xD Type: Wake
3225	16:23:41 GPE0xE Type: Wake
3226	16:23:41 GPE0xF Type: Wake
3227	16:23:41 ===== Info ========
3228	16:23:41 Int Level 9
3229	16:23:41 In Xrupt F96EFDB8 in arg F96EFF30
3230	16:23:41 Node
3231	16:23:41 Name [_GPE]
3232	16:23:41 Flags: 0x0
3233	16:23:41 Reg count 2
3234	16:23:41 GPE0x3 Type: Wake
3235	16:23:46 Event tread
3236	16:23:46 AllocateSuspendMemory s_cpu:0
3237	16:23:46 Alloc s_cpu OK CPU0 2304 bytes at 2E
3238	16:23:46 AllocSuspend: CPU0 CR3:1FF000
3239	16:23:46 Status 1Mb alloc 0
3240	21 Jul 16:23:47 acpica$ log is reading
3241	16:23:47 APM: Setting suspend state:3
3242	16:23:47 APM:Max C state 2
3243	21 Jul 16:28:13 AcpiDaemon LID device not finding, finish thread
3244	00
3245	--:--:--
3246	PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
3247	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
3248	--:--:-- SS Selector fault
3249	16:27:25 CFG: Link [LNKE] IRQ5
3250	16:27:25 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
3251	16:27:25 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
3252	16:27:25 AcpiOsPredefinedOverride: "_REV"
3253	16:27:25 AcpiOsPredefinedOverride: "_OS_"
3254	16:27:25 AcpiOsPredefinedOverride: override to eComStation
3255	16:27:25 AcpiOsPredefinedOverride: "_GL_"
3256	16:27:25 AcpiOsPredefinedOverride: "_OSI"
3257	16:27:25 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
3258	16:27:25 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3259	16:27:25 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3260	16:27:25 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
3261	16:27:25 ACPI: FACS @ 0x7FFF0000/0x40
3262	16:27:25 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3263	16:27:25 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
3264	16:27:25 Table [DSDT]
3265	16:27:25 Table [FACS]
3266	16:27:25 Table [FACP]
3267	16:27:25 Table [APIC]
3268	16:27:25 Local APIC address: FEE00000h
3269	16:27:25 System also has 8259
3270	16:27:25 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
3271	16:27:25 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
3272	16:27:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
3273	16:27:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
3274	16:27:25 Size of FACDT 244
3275	16:27:25 Type of computer - Unspecified
3276	16:27:25 System vector the SCI interrupt is wired to in 8259 mode. 9
3277	16:27:25 System port address of the SMI Command Port 0x1048
3278	16:27:25 The value to write to SMI_CMD to disable SMI 0x81
3279	16:27:25 The value to write to SMI_CMD to re-enable SMI 0x80
3280	16:27:25 The value to write to SMI_CMD to enter the S4BIOS state 0x0
3281	16:27:25 System port address of the PM1a Event Register Block 1000
3282	16:27:25 System port address of the PM1b Event Register Block 0
3283	16:27:25 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
3284	16:27:25 System port address of the PM1a Control Register Block 1004
3285	16:27:25 System port address of the PM1b Control Register Block 0
3286	16:27:25 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
3287	16:27:25 System port address of the PM2 Control Register Block 1016
3288	16:27:25 Number of bytes decoded by PM2_CNT_BLK 1
3289	16:27:25 System port address of the Power Management Timer Control Register Block 1008
3290	16:27:25 Number of bytes decoded by PM_TMR_BLK (=4) 4
3291	16:27:25 System port address of General-Purpose Event 0 Register Block 1020
3292	16:27:25 System port address of General-Purpose Event 1 Register Block 1030
3293	16:27:25 Number of bytes decoded by GPE0_BLK 0x4
3294	16:27:25 Number of bytes decoded by GPE1_BLK 0x4
3295	16:27:25 Offset within the ACPI general-purpose event model where GPE1 based events start 10
3296	16:27:25 The worst-case hardware latency to enter and exit a C2 state 90 us
3297	16:27:25 The worst-case hardware latency to enter and exit a C3 state 900 us
3298	16:27:25 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
3299	16:27:25 The RTC CMOS RAM index to the day-of-month alarm value 126
3300	16:27:25 The RTC CMOS RAM index to the month of year alarm value 127
3301	16:27:25 IA-PC Boot Architecture Flags 0x0
3302	16:27:25 Fixed feature flags 4A5
3303	16:27:25 The reset register:
3304	16:27:25 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
3305	16:27:25 The value to write to the RESET_REG port to reset the system 0
3306	16:27:25 ***** Throttl Width 0 Offset 1
3307	16:27:25 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
3308	16:27:25 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3309	16:27:25 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3310	16:27:25 ** Scan EC Status = 0 Find 0 EC
3311	16:27:25 ** AcpiInitializeObjects mask:0 Status = 0
3312	16:27:25 Processor [CPU0]
3313	16:27:25 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
3314	16:27:25 Status Evaluate Processor 0x0 AE_OK
3315	16:27:25 Usable:1 Counter:0
3316	16:27:25 CPU id to N:0
3317	16:27:25 ProcId: 0x0
3318	16:27:25 P_BLK: 0x0
3319	16:27:25 P_BLK len: 0x0
3320	16:27:25 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
3321	16:27:25 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
3322	16:27:25 ** AcpiInstall Power Device Status = 0
3323	16:27:25 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
3324	16:27:25 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
3325	16:27:25 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
3326	16:27:25 ** AcpiInstall PMTimer Device Status = 0
3327	16:27:25 Total use:77360 unuse:11376 count:1533
3328	16:27:25 Event [_L13] Install GPE0x13
3329	16:27:25 Event [_L0E] Install GPE0xE
3330	16:27:25 Event [_L04] Install GPE0x4
3331	16:27:25 Event [_L07] Install GPE0x7
3332	16:27:25 Event [_L06] Install GPE0x6
3333	16:27:25 Event [_L05] Install GPE0x5
3334	16:27:25 Event [_L08] Install GPE0x8
3335	16:27:25 Event [_L0F] Install GPE0xF
3336	16:27:25 Event [_L0D] Install GPE0xD
3337	16:27:25 Event [_L0B] Install GPE0xB
3338	16:27:25 Event [_L0C] Install GPE0xC
3339	16:27:25 EndScan GPE Status 0
3340	16:27:29 APM: PSD find success. PSD Ftable:F97402BC
3341	16:27:29 APM:Max C state 0
3342	16:27:29 Register Notify 1st FD05929D
3343	16:27:32 FindPCIDevice
3344	16:28:3 Uniaud32: PSD find success. PSD Ftable:F97402BC
3345	16:28:3 FindPCIDevice
3346	16:28:5 APM: End scan power object
3347	16:28:8 ===== Info ========
3348	16:28:8 Int Level 9
3349	16:28:8 In Xrupt F96EFDB8 in arg F96EFDB8
3350	16:28:8 Node
3351	16:28:8 Name [_GPE]
3352	16:28:8 Flags: 0x0
3353	16:28:8 Reg count 2
3354	16:28:8 GPE0x4 Type: Wake
3355	16:28:8 GPE0x5 Type: Wake
3356	16:28:8 GPE0x6 Type: Wake
3357	16:28:8 GPE0x7 Type: Wake
3358	16:28:8 GPE0x8 Type: Wake
3359	16:28:8 GPE0xB Type: Wake
3360	16:28:8 GPE0xC Type: Wake
3361	16:28:8 GPE0xD Type: Wake
3362	16:28:8 GPE0xE Type: Wake
3363	16:28:8 GPE0xF Type: Wake
3364	16:28:8 ===== Info ========
3365	16:28:8 Int Level 9
3366	16:28:8 In Xrupt F96EFDB8 in arg F96EFF30
3367	16:28:8 Node
3368	16:28:8 Name [_GPE]
3369	16:28:8 Flags: 0x0
3370	16:28:8 Reg count 2
3371	16:28:8 GPE0x3 Type: Wake
3372	16:28:13 Event tread
3373	16:28:13 AllocateSuspendMemory s_cpu:0
3374	16:28:13 Alloc s_cpu OK CPU0 2304 bytes at D
3375	16:28:13 AllocSuspend: CPU0 CR3:1FF000
3376	16:28:13 Status 1Mb alloc 0
3377	21 Jul 16:28:14 acpica$ log is reading
3378	16:28:14 APM: Setting suspend state:3
3379	16:28:14 APM:Max C state 2
3380	21 Jul 16:53:50 acpica$ log is reading
3381	--:--:-- KEE Version 0x10000
3382	--:--:--
3383	PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
3384	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
3385	--:--:-- SS Selector fault
3386	16:53:1 CFG: Link [LNKE] IRQ5
3387	16:53:1 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
3388	16:53:1 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
3389	16:53:1 AcpiOsPredefinedOverride: "_REV"
3390	16:53:1 AcpiOsPredefinedOverride: "_OS_"
3391	16:53:1 AcpiOsPredefinedOverride: override to eComStation
3392	16:53:1 AcpiOsPredefinedOverride: "_GL_"
3393	16:53:1 AcpiOsPredefinedOverride: "_OSI"
3394	16:53:1 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
3395	16:53:1 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3396	16:53:1 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3397	16:53:1 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
3398	16:53:1 ACPI: FACS @ 0x7FFF0000/0x40
3399	16:53:1 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3400	16:53:1 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
3401	16:53:2 Table [DSDT]
3402	16:53:2 Table [FACS]
3403	16:53:2 Table [FACP]
3404	16:53:2 Table [APIC]
3405	16:53:2 Local APIC address: FEE00000h
3406	16:53:2 System also has 8259
3407	16:53:2 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
3408	16:53:2 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
3409	16:53:2 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
3410	16:53:2 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
3411	16:53:2 Size of FACDT 244
3412	16:53:2 Type of computer - Unspecified
3413	16:53:2 System vector the SCI interrupt is wired to in 8259 mode. 9
3414	16:53:2 System port address of the SMI Command Port 0x1048
3415	16:53:2 The value to write to SMI_CMD to disable SMI 0x81
3416	16:53:2 The value to write to SMI_CMD to re-enable SMI 0x80
3417	16:53:2 The value to write to SMI_CMD to enter the S4BIOS state 0x0
3418	16:53:2 System port address of the PM1a Event Register Block 1000
3419	16:53:2 System port address of the PM1b Event Register Block 0
3420	16:53:2 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
3421	16:53:2 System port address of the PM1a Control Register Block 1004
3422	16:53:2 System port address of the PM1b Control Register Block 0
3423	16:53:2 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
3424	16:53:2 System port address of the PM2 Control Register Block 1016
3425	16:53:2 Number of bytes decoded by PM2_CNT_BLK 1
3426	16:53:2 System port address of the Power Management Timer Control Register Block 1008
3427	16:53:2 Number of bytes decoded by PM_TMR_BLK (=4) 4
3428	16:53:2 System port address of General-Purpose Event 0 Register Block 1020
3429	16:53:2 System port address of General-Purpose Event 1 Register Block 1030
3430	16:53:2 Number of bytes decoded by GPE0_BLK 0x4
3431	16:53:2 Number of bytes decoded by GPE1_BLK 0x4
3432	16:53:2 Offset within the ACPI general-purpose event model where GPE1 based events start 10
3433	16:53:2 The worst-case hardware latency to enter and exit a C2 state 90 us
3434	16:53:2 The worst-case hardware latency to enter and exit a C3 state 900 us
3435	16:53:2 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
3436	16:53:2 The RTC CMOS RAM index to the day-of-month alarm value 126
3437	16:53:2 The RTC CMOS RAM index to the month of year alarm value 127
3438	16:53:2 IA-PC Boot Architecture Flags 0x0
3439	16:53:2 Fixed feature flags 4A5
3440	16:53:2 The reset register:
3441	16:53:2 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
3442	16:53:2 The value to write to the RESET_REG port to reset the system 0
3443	16:53:2 ***** Throttl Width 0 Offset 1
3444	16:53:2 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
3445	16:53:2 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3446	16:53:2 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3447	16:53:2 ** Scan EC Status = 0 Find 0 EC
3448	16:53:2 ** AcpiInitializeObjects mask:0 Status = 0
3449	16:53:2 Processor [CPU0]
3450	16:53:2 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
3451	16:53:2 Status Evaluate Processor 0x0 AE_OK
3452	16:53:2 Usable:1 Counter:0
3453	16:53:2 CPU id to N:0
3454	16:53:2 ProcId: 0x0
3455	16:53:2 P_BLK: 0x0
3456	16:53:2 P_BLK len: 0x0
3457	16:53:2 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
3458	16:53:2 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
3459	16:53:2 ** AcpiInstall Power Device Status = 0
3460	16:53:2 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
3461	16:53:2 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
3462	16:53:2 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
3463	16:53:2 ** AcpiInstall PMTimer Device Status = 0
3464	16:53:2 Total use:77360 unuse:11376 count:1533
3465	16:53:2 Event [_L13] Install GPE0x13
3466	16:53:2 Event [_L0E] Install GPE0xE
3467	16:53:2 Event [_L04] Install GPE0x4
3468	16:53:2 Event [_L07] Install GPE0x7
3469	16:53:2 Event [_L06] Install GPE0x6
3470	16:53:2 Event [_L05] Install GPE0x5
3471	16:53:2 Event [_L08] Install GPE0x8
3472	16:53:2 Event [_L0F] Install GPE0xF
3473	16:53:2 Event [_L0D] Install GPE0xD
3474	16:53:2 Event [_L0B] Install GPE0xB
3475	16:53:2 Event [_L0C] Install GPE0xC
3476	16:53:2 EndScan GPE Status 0
3477	16:53:6 APM: PSD find success. PSD Ftable:F97402BC
3478	16:53:6 APM:Max C state 0
3479	16:53:6 Register Notify 1st FD05929D
3480	16:53:8 FindPCIDevice
3481	16:53:39 Uniaud32: PSD find success. PSD Ftable:F97402BC
3482	16:53:39 FindPCIDevice
3483	16:53:41 APM: End scan power object
3484	16:53:44 ===== Info ========
3485	16:53:44 Int Level 9
3486	16:53:44 In Xrupt F96EFDB8 in arg F96EFDB8
3487	16:53:44 Node
3488	16:53:44 Name [_GPE]
3489	16:53:44 Flags: 0x0
3490	16:53:44 Reg count 2
3491	16:53:44 GPE0x4 Type: Wake
3492	16:53:44 GPE0x5 Type: Wake
3493	16:53:44 GPE0x6 Type: Wake
3494	16:53:44 GPE0x7 Type: Wake
3495	16:53:44 GPE0x8 Type: Wake
3496	16:53:44 GPE0xB Type: Wake
3497	16:53:44 GPE0xC Type: Wake
3498	16:53:44 GPE0xD Type: Wake
3499	16:53:44 GPE0xE Type: Wake
3500	16:53:44 GPE0xF Type: Wake
3501	16:53:44 ===== Info ========
3502	16:53:44 Int Level 9
3503	16:53:44 In Xrupt F96EFDB8 in arg F96EFF30
3504	16:53:44 Node
3505	16:53:44 Name [_GPE]
3506	16:53:44 Flags: 0x0
3507	16:53:44 Reg count 2
3508	16:53:44 GPE0x3 Type: Wake
3509	16:53:50 Event tread
3510	16:53:50 AllocateSuspendMemory s_cpu:0
3511	16:53:50 Alloc s_cpu OK CPU0 2304 bytes at 32
3512	16:53:50 AllocSuspend: CPU0 CR3:1FF000
3513	16:53:50 Status 1Mb alloc 0
3514	21 Jul 16:53:50 acpica$ log is reading
3515	16:53:50 APM: Setting suspend state:3
3516	16:53:50 APM:Max C state 2
3517	25 Jul 08:18:12 acpica$ logLID device not finding, finish thread
3518	00
3519	--:--:--
3520	PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06
3521	--:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0
3522	--:--:-- SS Selector fault
3523	8:17:25 CFG: Link [LNKE] IRQ5
3524	8:17:25 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000
3525	8:17:25 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
3526	8:17:25 AcpiOsPredefinedOverride: "_REV"
3527	8:17:25 AcpiOsPredefinedOverride: "_OS_"
3528	8:17:25 AcpiOsPredefinedOverride: override to eComStation
3529	8:17:25 AcpiOsPredefinedOverride: "_GL_"
3530	8:17:25 AcpiOsPredefinedOverride: "_OSI"
3531	8:17:25 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD )
3532	8:17:25 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3533	8:17:25 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3534	8:17:25 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D)
3535	8:17:25 ACPI: FACS @ 0x7FFF0000/0x40
3536	8:17:25 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0)
3537	8:17:25 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT]
3538	8:17:25 Table [DSDT]
3539	8:17:25 Table [FACS]
3540	8:17:25 Table [FACP]
3541	8:17:25 Table [APIC]
3542	8:17:25 Local APIC address: FEE00000h
3543	8:17:25 System also has 8259
3544	8:17:25 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
3545	8:17:25 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
3546	8:17:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
3547	8:17:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec
3548	8:17:25 Size of FACDT 244
3549	8:17:25 Type of computer - Unspecified
3550	8:17:25 System vector the SCI interrupt is wired to in 8259 mode. 9
3551	8:17:25 System port address of the SMI Command Port 0x1048
3552	8:17:25 The value to write to SMI_CMD to disable SMI 0x81
3553	8:17:25 The value to write to SMI_CMD to re-enable SMI 0x80
3554	8:17:25 The value to write to SMI_CMD to enter the S4BIOS state 0x0
3555	8:17:25 System port address of the PM1a Event Register Block 1000
3556	8:17:25 System port address of the PM1b Event Register Block 0
3557	8:17:25 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
3558	8:17:25 System port address of the PM1a Control Register Block 1004
3559	8:17:25 System port address of the PM1b Control Register Block 0
3560	8:17:25 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
3561	8:17:25 System port address of the PM2 Control Register Block 1016
3562	8:17:25 Number of bytes decoded by PM2_CNT_BLK 1
3563	8:17:25 System port address of the Power Management Timer Control Register Block 1008
3564	8:17:25 Number of bytes decoded by PM_TMR_BLK (=4) 4
3565	8:17:25 System port address of General-Purpose Event 0 Register Block 1020
3566	8:17:25 System port address of General-Purpose Event 1 Register Block 1030
3567	8:17:25 Number of bytes decoded by GPE0_BLK 0x4
3568	8:17:25 Number of bytes decoded by GPE1_BLK 0x4
3569	8:17:25 Offset within the ACPI general-purpose event model where GPE1 based events start 10
3570	8:17:25 The worst-case hardware latency to enter and exit a C2 state 90 us
3571	8:17:25 The worst-case hardware latency to enter and exit a C3 state 900 us
3572	8:17:25 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
3573	8:17:25 The RTC CMOS RAM index to the day-of-month alarm value 126
3574	8:17:25 The RTC CMOS RAM index to the month of year alarm value 127
3575	8:17:25 IA-PC Boot Architecture Flags 0x0
3576	8:17:25 Fixed feature flags 4A5
3577	8:17:25 The reset register:
3578	8:17:25 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0
3579	8:17:25 The value to write to the RESET_REG port to reset the system 0
3580	8:17:25 ***** Throttl Width 0 Offset 1
3581	8:17:25 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B
3582	8:17:25 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3583	8:17:25 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
3584	8:17:25 ** Scan EC Status = 0 Find 0 EC
3585	8:17:25 ** AcpiInitializeObjects mask:0 Status = 0
3586	8:17:25 Processor [CPU0]
3587	8:17:25 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
3588	8:17:25 Status Evaluate Processor 0x0 AE_OK
3589	8:17:25 Usable:1 Counter:0
3590	8:17:25 CPU id to N:0
3591	8:17:25 ProcId: 0x0
3592	8:17:25 P_BLK: 0x0
3593	8:17:25 P_BLK len: 0x0
3594	8:17:25 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
3595	8:17:25 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
3596	8:17:25 ** AcpiInstall Power Device Status = 0
3597	8:17:25 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204]
3598	8:17:25 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204]
3599	8:17:25 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
3600	8:17:25 ** AcpiInstall PMTimer Device Status = 0
3601	8:17:25 Total use:77360 unuse:11376 count:1533
3602	8:17:25 Event [_L13] Install GPE0x13
3603	8:17:25 Event [_L0E] Install GPE0xE
3604	8:17:25 Event [_L04] Install GPE0x4
3605	8:17:25 Event [_L07] Install GPE0x7
3606	8:17:25 Event [_L06] Install GPE0x6
3607	8:17:25 Event [_L05] Install GPE0x5
3608	8:17:25 Event [_L08] Install GPE0x8
3609	8:17:25 Event [_L0F] Install GPE0xF
3610	8:17:25 Event [_L0D] Install GPE0xD
3611	8:17:25 Event [_L0B] Install GPE0xB
3612	8:17:25 Event [_L0C] Install GPE0xC
3613	8:17:25 EndScan GPE Status 0
3614	8:17:29 APM: PSD find success. PSD Ftable:F97402BC
3615	8:17:29 APM:Max C state 0
3616	8:17:29 Register Notify 1st FD05929D
3617	8:17:31 FindPCIDevice
3618	8:18:2 Uniaud32: PSD find success. PSD Ftable:F97402BC
3619	8:18:2 FindPCIDevice
3620	8:18:4 APM: End scan power object
3621	8:18:7 ===== Info ========
3622	8:18:7 Int Level 9
3623	8:18:7 In Xrupt F96EFDB8 in arg F96EFDB8
3624	8:18:7 Node
3625	8:18:7 Name [_GPE]
3626	8:18:7 Flags: 0x0
3627	8:18:7 Reg count 2
3628	8:18:7 GPE0x4 Type: Wake
3629	8:18:7 GPE0x5 Type: Wake
3630	8:18:7 GPE0x6 Type: Wake
3631	8:18:7 GPE0x7 Type: Wake
3632	8:18:7 GPE0x8 Type: Wake
3633	8:18:7 GPE0xB Type: Wake
3634	8:18:7 GPE0xC Type: Wake
3635	8:18:7 GPE0xD Type: Wake
3636	8:18:7 GPE0xE Type: Wake
3637	8:18:7 GPE0xF Type: Wake
3638	8:18:7 ===== Info ========
3639	8:18:7 Int Level 9
3640	8:18:7 In Xrupt F96EFDB8 in arg F96EFF30
3641	8:18:7 Node
3642	8:18:7 Name [_GPE]
3643	8:18:7 Flags: 0x0
3644	8:18:7 Reg count 2
3645	8:18:7 GPE0x3 Type: Wake
3646	8:18:12 Event tread
3647	8:18:12 AllocateSuspendMemory s_cpu:0
3648	8:18:12 Alloc s_cpu OK CPU0 2304 bytes at C
3649	8:18:12 AllocSuspend: CPU0 CR3:1FF000
3650	8:18:12 Status 1Mb alloc 0
3651	25 Jul 08:18:12 acpica$ log is reading
3652	8:18:12 APM: Setting suspend state:3
3653	8:18:12 APM:Max C state 2

Download in other formats:

Original Format