08 Jul 23:31:38 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 23:30:48 CFG: Link [LNKE] IRQ5 23:30:48 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 23:30:48 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 23:30:48 AcpiOsPredefinedOverride: "_REV" 23:30:48 AcpiOsPredefinedOverride: "_OS_" 23:30:48 AcpiOsPredefinedOverride: override to eComStation 23:30:48 AcpiOsPredefinedOverride: "_GL_" 23:30:48 AcpiOsPredefinedOverride: "_OSI" 23:30:48 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 23:30:48 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:30:48 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:30:48 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 23:30:48 ACPI: FACS @ 0x7FFF0000/0x40 23:30:48 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:30:48 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 23:30:48 Table [DSDT] 23:30:48 Table [FACS] 23:30:48 Table [FACP] 23:30:48 Table [APIC] 23:30:48 Local APIC address: FEE00000h 23:30:48 System also has 8259 23:30:48 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 23:30:48 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 23:30:48 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 23:30:48 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 23:30:48 Size of FACDT 244 23:30:48 Type of computer - Unspecified 23:30:48 System vector the SCI interrupt is wired to in 8259 mode. 9 23:30:48 System port address of the SMI Command Port 0x1048 23:30:48 The value to write to SMI_CMD to disable SMI 0x81 23:30:48 The value to write to SMI_CMD to re-enable SMI 0x80 23:30:48 The value to write to SMI_CMD to enter the S4BIOS state 0x0 23:30:48 System port address of the PM1a Event Register Block 1000 23:30:48 System port address of the PM1b Event Register Block 0 23:30:48 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 23:30:48 System port address of the PM1a Control Register Block 1004 23:30:48 System port address of the PM1b Control Register Block 0 23:30:48 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 23:30:48 System port address of the PM2 Control Register Block 1016 23:30:48 Number of bytes decoded by PM2_CNT_BLK 1 23:30:48 System port address of the Power Management Timer Control Register Block 1008 23:30:48 Number of bytes decoded by PM_TMR_BLK (=4) 4 23:30:48 System port address of General-Purpose Event 0 Register Block 1020 23:30:48 System port address of General-Purpose Event 1 Register Block 1030 23:30:48 Number of bytes decoded by GPE0_BLK 0x4 23:30:48 Number of bytes decoded by GPE1_BLK 0x4 23:30:48 Offset within the ACPI general-purpose event model where GPE1 based events start 10 23:30:48 The worst-case hardware latency to enter and exit a C2 state 90 us 23:30:48 The worst-case hardware latency to enter and exit a C3 state 900 us 23:30:48 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 23:30:48 The RTC CMOS RAM index to the day-of-month alarm value 126 23:30:48 The RTC CMOS RAM index to the month of year alarm value 127 23:30:48 IA-PC Boot Architecture Flags 0x0 23:30:48 Fixed feature flags 4A5 23:30:48 The reset register: 23:30:48 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 23:30:48 The value to write to the RESET_REG port to reset the system 0 23:30:48 ***** Throttl Width 0 Offset 1 23:30:48 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 23:30:49 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:30:49 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:30:49 ** Scan EC Status = 0 Find 0 EC 23:30:49 ** AcpiInitializeObjects mask:0 Status = 0 23:30:49 Processor [CPU0] 23:30:49 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 23:30:49 Status Evaluate Processor 0x0 AE_OK 23:30:49 Usable:1 Counter:0 23:30:49 CPU id to N:0 23:30:49 ProcId: 0x0 23:30:49 P_BLK: 0x0 23:30:49 P_BLK len: 0x0 23:30:49 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 23:30:49 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 23:30:49 Found bridge "PCI0" BBN is absent status:5 23:30:49 Finding:0 bridges 23:30:49 0:0.0 Class:600 Hdr:80 Bridge H->0 23:30:49 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 23:30:49 0:2.0 Class:601 Hdr:80 23:30:49 0:2.3 Class:C00 Hdr:0 23:30:49 0:2.5 Class:101 Hdr:0 23:30:49 0:2.7 Class:401 Hdr:0 23:30:49 0:3.0 Class:C03 Hdr:80 23:30:49 0:3.1 Class:C03 Hdr:0 23:30:49 0:3.2 Class:C03 Hdr:0 23:30:49 0:3.3 Class:C03 Hdr:0 23:30:49 0:4.0 Class:200 Hdr:0 23:30:49 0:8.0 Class:480 Hdr:0 23:30:49 0:10.0 Class:780 Hdr:0 23:30:49 1:0.0 Class:300 Hdr:0 23:30:49 PCI Bus scan: 2 PCI buses found. 23:30:49 Scan ACPI tree for PCI functions 23:30:49 0:0.0 'PCI0' (F96E5C20) 23:30:49 0:2.5 'IDEC' (F96E5CF8) 23:30:49 0:6.7 'PCI1' (F96E7630) 23:30:49 0:7.7 'PCI2' (F96E76A8) 23:30:49 0:8.7 'PCI3' (F96E7720) 23:30:49 0:10.7 'PCI4' (F96E7798) 23:30:49 0:2.0 'S962' (F96E7810) 23:30:49 0:3.0 'USB0' (F96E7E30) 23:30:49 0:3.1 'USB1' (F96E7EE0) 23:30:49 0:3.2 'USB2' (F96E7F90) 23:30:49 0:3.3 'USB3' (F96E8040) 23:30:49 0:4.0 'MAC0' (F96E80F0) 23:30:49 0:2.7 'AUD0' (F96E8140) 23:30:49 0:2.6 'AMR0' (F96E8190) 23:30:49 Bridges found: 23:30:49 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 23:30:49 0:1.0 class:604 type: 1 Bus 0->1 23:30:49 IRQLinks found: 23:30:49 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 23:30:49 A[] 23:30:49 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 23:30:49 A[] 23:30:49 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 23:30:49 A[] 23:30:49 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 23:30:49 A[] 23:30:49 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 23:30:49 A[] 23:30:49 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 23:30:49 A[] 23:30:49 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 23:30:49 A[] 23:30:49 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 23:30:49 A[] 23:30:49 PCI devices found: 23:30:49 0:0.0 1039:648 'PCI0' 23:30:49 0:1.0 1039:1 23:30:49 0:2.0 1039:8 'S962' 23:30:49 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:30:49 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:30:49 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 23:30:49 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 23:30:49 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 23:30:49 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 23:30:49 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 23:30:49 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:30:49 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:30:49 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:30:49 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:30:49 Bus detected - 1 23:30:49 ** AcpiInstall Power Device Status = 0 23:30:49 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 23:30:49 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 23:30:49 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 23:30:49 ** AcpiInstall PMTimer Device Status = 0 23:30:49 ** Total use:94208 unuse:9016 count:1573 ** 23:30:49 Event [_L13] Install GPE0x13 23:30:49 Event [_L0E] Install GPE0xE 23:30:49 Event [_L04] Install GPE0x4 23:30:49 Event [_L07] Install GPE0x7 23:30:49 Event [_L06] Install GPE0x6 23:30:49 Event [_L05] Install GPE0x5 23:30:49 Event [_L08] Install GPE0x8 23:30:49 Event [_L0F] Install GPE0xF 23:30:49 Event [_L0D] Install GPE0xD 23:30:49 Event [_L0B] Install GPE0xB 23:30:49 Event [_L0C] Install GPE0xC 23:30:49 EndScan GPE Status 0 23:30:52 APM: PSD find success. PSD Ftable:F97402BC 23:30:52 APM:Max C state 0 23:30:52 Register Notify 1st FD05929D 23:30:55 FindPCIDevice 23:30:55 Need: B:0x0 D:0x2 F:0x5 23:30:55 Finding APIC0 PIC11 Dev: [IDEC] 23:31:26 Uniaud32: PSD find success. PSD Ftable:F97402BC 23:31:26 FindPCIDevice 23:31:26 Need: B:0x0 D:0x2 F:0x0 23:31:28 APM: End scan power object 23:31:31 ===== Info ======== 23:31:31 Int Level 9 23:31:31 In Xrupt F96EFDB8 in arg F96EFDB8 23:31:31 Node 23:31:31 Name [_GPE] 23:31:31 Flags: 0x0 23:31:31 Reg count 2 23:31:31 GPE0x4 Type: Wake 23:31:31 GPE0x5 Type: Wake 23:31:31 GPE0x6 Type: Wake 23:31:31 GPE0x7 Type: Wake 23:31:31 GPE0x8 Type: Wake 23:31:31 GPE0xB Type: Wake 23:31:31 GPE0xC Type: Wake 23:31:31 GPE0xD Type: Wake 23:31:31 GPE0xE Type: Wake 23:31:31 GPE0xF Type: Wake 23:31:31 ===== Info ======== 23:31:31 Int Level 9 23:31:31 In Xrupt F96EFDB8 in arg F96EFF30 23:31:31 Node 23:31:31 Name [_GPE] 23:31:31 Flags: 0x0 23:31:31 Reg count 2 23:31:31 GPE0x3 Type: Wake 23:31:38 ** Event tread ** 23:31:38 AllocateSuspendMemory s_cpu:0 23:31:38 Alloc s_cpu OK CPU0 2304 bytes at 26 23:31:38 AllocSuspend: CPU0 CR3:1FF000 23:31:38 Status 1Mb alloc 0 08 Jul 23:31:38 acpica$ log is reading 23:31:38 APM: Setting suspend state:3 23:31:38 APM:Max C state 2 09 Jul 00:29:59 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 0:29:10 CFG: Link [LNKE] IRQ5 0:29:10 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 0:29:10 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 0:29:10 AcpiOsPredefinedOverride: "_REV" 0:29:10 AcpiOsPredefinedOverride: "_OS_" 0:29:10 AcpiOsPredefinedOverride: override to eComStation 0:29:10 AcpiOsPredefinedOverride: "_GL_" 0:29:10 AcpiOsPredefinedOverride: "_OSI" 0:29:10 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 0:29:10 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:29:10 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:29:10 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 0:29:10 ACPI: FACS @ 0x7FFF0000/0x40 0:29:10 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:29:10 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 0:29:10 Table [DSDT] 0:29:10 Table [FACS] 0:29:10 Table [FACP] 0:29:10 Table [APIC] 0:29:10 Local APIC address: FEE00000h 0:29:10 System also has 8259 0:29:10 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 0:29:10 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 0:29:10 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 0:29:10 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 0:29:10 Size of FACDT 244 0:29:10 Type of computer - Unspecified 0:29:10 System vector the SCI interrupt is wired to in 8259 mode. 9 0:29:10 System port address of the SMI Command Port 0x1048 0:29:10 The value to write to SMI_CMD to disable SMI 0x81 0:29:10 The value to write to SMI_CMD to re-enable SMI 0x80 0:29:10 The value to write to SMI_CMD to enter the S4BIOS state 0x0 0:29:10 System port address of the PM1a Event Register Block 1000 0:29:10 System port address of the PM1b Event Register Block 0 0:29:10 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 0:29:10 System port address of the PM1a Control Register Block 1004 0:29:10 System port address of the PM1b Control Register Block 0 0:29:10 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 0:29:10 System port address of the PM2 Control Register Block 1016 0:29:10 Number of bytes decoded by PM2_CNT_BLK 1 0:29:10 System port address of the Power Management Timer Control Register Block 1008 0:29:10 Number of bytes decoded by PM_TMR_BLK (=4) 4 0:29:10 System port address of General-Purpose Event 0 Register Block 1020 0:29:10 System port address of General-Purpose Event 1 Register Block 1030 0:29:10 Number of bytes decoded by GPE0_BLK 0x4 0:29:10 Number of bytes decoded by GPE1_BLK 0x4 0:29:10 Offset within the ACPI general-purpose event model where GPE1 based events start 10 0:29:10 The worst-case hardware latency to enter and exit a C2 state 90 us 0:29:10 The worst-case hardware latency to enter and exit a C3 state 900 us 0:29:10 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 0:29:10 The RTC CMOS RAM index to the day-of-month alarm value 126 0:29:10 The RTC CMOS RAM index to the month of year alarm value 127 0:29:10 IA-PC Boot Architecture Flags 0x0 0:29:10 Fixed feature flags 4A5 0:29:10 The reset register: 0:29:10 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 0:29:10 The value to write to the RESET_REG port to reset the system 0 0:29:10 ***** Throttl Width 0 Offset 1 0:29:10 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 0:29:10 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:29:10 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:29:10 ** Scan EC Status = 0 Find 0 EC 0:29:10 ** AcpiInitializeObjects mask:0 Status = 0 0:29:10 Processor [CPU0] 0:29:10 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 0:29:10 Status Evaluate Processor 0x0 AE_OK 0:29:10 Usable:1 Counter:0 0:29:10 CPU id to N:0 0:29:10 ProcId: 0x0 0:29:10 P_BLK: 0x0 0:29:10 P_BLK len: 0x0 0:29:10 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 0:29:10 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 0:29:10 Found bridge "PCI0" BBN is absent status:5 0:29:10 Finding:0 bridges 0:29:10 0:0.0 Class:600 Hdr:80 Bridge H->0 0:29:10 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 0:29:10 0:2.0 Class:601 Hdr:80 0:29:10 0:2.3 Class:C00 Hdr:0 0:29:10 0:2.5 Class:101 Hdr:0 0:29:10 0:2.7 Class:401 Hdr:0 0:29:10 0:3.0 Class:C03 Hdr:80 0:29:10 0:3.1 Class:C03 Hdr:0 0:29:10 0:3.2 Class:C03 Hdr:0 0:29:10 0:3.3 Class:C03 Hdr:0 0:29:10 0:4.0 Class:200 Hdr:0 0:29:10 0:8.0 Class:480 Hdr:0 0:29:10 0:10.0 Class:780 Hdr:0 0:29:10 1:0.0 Class:300 Hdr:0 0:29:10 PCI Bus scan: 2 PCI buses found. 0:29:10 Scan ACPI tree for PCI functions 0:29:10 0:0.0 'PCI0' (F96E5C20) 0:29:10 0:2.5 'IDEC' (F96E5CF8) 0:29:10 0:6.7 'PCI1' (F96E7630) 0:29:10 0:7.7 'PCI2' (F96E76A8) 0:29:10 0:8.7 'PCI3' (F96E7720) 0:29:10 0:10.7 'PCI4' (F96E7798) 0:29:10 0:2.0 'S962' (F96E7810) 0:29:10 0:3.0 'USB0' (F96E7E30) 0:29:10 0:3.1 'USB1' (F96E7EE0) 0:29:10 0:3.2 'USB2' (F96E7F90) 0:29:10 0:3.3 'USB3' (F96E8040) 0:29:10 0:4.0 'MAC0' (F96E80F0) 0:29:10 0:2.7 'AUD0' (F96E8140) 0:29:10 0:2.6 'AMR0' (F96E8190) 0:29:10 Bridges found: 0:29:10 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 0:29:10 0:1.0 class:604 type: 1 Bus 0->1 0:29:10 IRQLinks found: 0:29:10 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 0:29:10 A[] 0:29:10 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 0:29:10 A[] 0:29:10 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 0:29:10 A[] 0:29:10 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 0:29:10 A[] 0:29:10 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 0:29:10 A[] 0:29:10 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 0:29:10 A[] 0:29:10 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 0:29:10 A[] 0:29:10 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 0:29:10 A[] 0:29:10 PCI devices found: 0:29:10 0:0.0 1039:648 'PCI0' 0:29:10 0:1.0 1039:1 0:29:10 0:2.0 1039:8 'S962' 0:29:10 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:29:10 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:29:10 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 0:29:10 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 0:29:10 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 0:29:10 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 0:29:10 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 0:29:10 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:29:10 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:29:10 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:29:10 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:29:10 Bus detected - 1 0:29:10 ** AcpiInstall Power Device Status = 0 0:29:10 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 0:29:10 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 0:29:10 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 0:29:10 ** AcpiInstall PMTimer Device Status = 0 0:29:10 ** Total use:94208 unuse:9016 count:1573 ** 0:29:10 Event [_L13] Install GPE0x13 0:29:10 Event [_L0E] Install GPE0xE 0:29:10 Event [_L04] Install GPE0x4 0:29:10 Event [_L07] Install GPE0x7 0:29:10 Event [_L06] Install GPE0x6 0:29:10 Event [_L05] Install GPE0x5 0:29:10 Event [_L08] Install GPE0x8 0:29:10 Event [_L0F] Install GPE0xF 0:29:10 Event [_L0D] Install GPE0xD 0:29:10 Event [_L0B] Install GPE0xB 0:29:10 Event [_L0C] Install GPE0xC 0:29:10 EndScan GPE Status 0 0:29:14 APM: PSD find success. PSD Ftable:F97402BC 0:29:14 APM:Max C state 0 0:29:14 Register Notify 1st FD05929D 0:29:16 FindPCIDevice 0:29:16 Need: B:0x0 D:0x2 F:0x5 0:29:16 Finding APIC0 PIC11 Dev: [IDEC] 0:29:47 Uniaud32: PSD find success. PSD Ftable:F97402BC 0:29:47 FindPCIDevice 0:29:47 Need: B:0x0 D:0x2 F:0x0 0:29:49 APM: End scan power object 0:29:52 ===== Info ======== 0:29:52 Int Level 9 0:29:52 In Xrupt F96EFDB8 in arg F96EFDB8 0:29:52 Node 0:29:52 Name [_GPE] 0:29:52 Flags: 0x0 0:29:52 Reg count 2 0:29:52 GPE0x4 Type: Wake 0:29:52 GPE0x5 Type: Wake 0:29:52 GPE0x6 Type: Wake 0:29:52 GPE0x7 Type: Wake 0:29:52 GPE0x8 Type: Wake 0:29:52 GPE0xB Type: Wake 0:29:52 GPE0xC Type: Wake 0:29:52 GPE0xD Type: Wake 0:29:52 GPE0xE Type: Wake 0:29:52 GPE0xF Type: Wake 0:29:52 ===== Info ======== 0:29:52 Int Level 9 0:29:52 In Xrupt F96EFDB8 in arg F96EFF30 0:29:52 Node 0:29:52 Name [_GPE] 0:29:52 Flags: 0x0 0:29:52 Reg count 2 0:29:52 GPE0x3 Type: Wake 0:29:59 ** Event tread ** 0:29:59 AllocateSuspendMemory s_cpu:0 0:29:59 Alloc s_cpu OK CPU0 2304 bytes at 3B 0:29:59 AllocSuspend: CPU0 CR3:1FF000 0:29:59 Status 1Mb alloc 0 09 Jul 00:29:59 acpica$ log is reading 0:29:59 APM: Setting suspend state:3 0:29:59 APM:Max C state 2 09 Jul 00:42:11 AcpiDaemon LID thread is starting ID 0x4 on 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 0:41:24 CFG: Link [LNKE] IRQ5 0:41:24 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 0:41:24 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 0:41:24 AcpiOsPredefinedOverride: "_REV" 0:41:24 AcpiOsPredefinedOverride: "_OS_" 0:41:24 AcpiOsPredefinedOverride: override to eComStation 0:41:24 AcpiOsPredefinedOverride: "_GL_" 0:41:24 AcpiOsPredefinedOverride: "_OSI" 0:41:24 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 0:41:24 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:41:24 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:41:24 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 0:41:24 ACPI: FACS @ 0x7FFF0000/0x40 0:41:24 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:41:24 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 0:41:24 Table [DSDT] 0:41:24 Table [FACS] 0:41:24 Table [FACP] 0:41:24 Table [APIC] 0:41:24 Local APIC address: FEE00000h 0:41:24 System also has 8259 0:41:24 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 0:41:24 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 0:41:24 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 0:41:24 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 0:41:24 Size of FACDT 244 0:41:24 Type of computer - Unspecified 0:41:24 System vector the SCI interrupt is wired to in 8259 mode. 9 0:41:24 System port address of the SMI Command Port 0x1048 0:41:24 The value to write to SMI_CMD to disable SMI 0x81 0:41:24 The value to write to SMI_CMD to re-enable SMI 0x80 0:41:24 The value to write to SMI_CMD to enter the S4BIOS state 0x0 0:41:24 System port address of the PM1a Event Register Block 1000 0:41:24 System port address of the PM1b Event Register Block 0 0:41:24 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 0:41:24 System port address of the PM1a Control Register Block 1004 0:41:24 System port address of the PM1b Control Register Block 0 0:41:24 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 0:41:24 System port address of the PM2 Control Register Block 1016 0:41:24 Number of bytes decoded by PM2_CNT_BLK 1 0:41:24 System port address of the Power Management Timer Control Register Block 1008 0:41:24 Number of bytes decoded by PM_TMR_BLK (=4) 4 0:41:24 System port address of General-Purpose Event 0 Register Block 1020 0:41:24 System port address of General-Purpose Event 1 Register Block 1030 0:41:24 Number of bytes decoded by GPE0_BLK 0x4 0:41:24 Number of bytes decoded by GPE1_BLK 0x4 0:41:24 Offset within the ACPI general-purpose event model where GPE1 based events start 10 0:41:24 The worst-case hardware latency to enter and exit a C2 state 90 us 0:41:24 The worst-case hardware latency to enter and exit a C3 state 900 us 0:41:24 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 0:41:24 The RTC CMOS RAM index to the day-of-month alarm value 126 0:41:24 The RTC CMOS RAM index to the month of year alarm value 127 0:41:24 IA-PC Boot Architecture Flags 0x0 0:41:24 Fixed feature flags 4A5 0:41:24 The reset register: 0:41:24 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 0:41:24 The value to write to the RESET_REG port to reset the system 0 0:41:24 ***** Throttl Width 0 Offset 1 0:41:24 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 0:41:24 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:41:24 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:41:24 ** Scan EC Status = 0 Find 0 EC 0:41:24 ** AcpiInitializeObjects mask:0 Status = 0 0:41:24 Processor [CPU0] 0:41:24 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 0:41:24 Status Evaluate Processor 0x0 AE_OK 0:41:24 Usable:1 Counter:0 0:41:24 CPU id to N:0 0:41:24 ProcId: 0x0 0:41:24 P_BLK: 0x0 0:41:24 P_BLK len: 0x0 0:41:24 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 0:41:24 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 0:41:24 Found bridge "PCI0" BBN is absent status:5 0:41:24 Finding:0 bridges 0:41:24 0:0.0 Class:600 Hdr:80 Bridge H->0 0:41:24 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 0:41:24 0:2.0 Class:601 Hdr:80 0:41:24 0:2.3 Class:C00 Hdr:0 0:41:24 0:2.5 Class:101 Hdr:0 0:41:24 0:2.7 Class:401 Hdr:0 0:41:24 0:3.0 Class:C03 Hdr:80 0:41:24 0:3.1 Class:C03 Hdr:0 0:41:24 0:3.2 Class:C03 Hdr:0 0:41:24 0:3.3 Class:C03 Hdr:0 0:41:24 0:4.0 Class:200 Hdr:0 0:41:24 0:8.0 Class:480 Hdr:0 0:41:24 0:10.0 Class:780 Hdr:0 0:41:24 1:0.0 Class:300 Hdr:0 0:41:24 PCI Bus scan: 2 PCI buses found. 0:41:24 Scan ACPI tree for PCI functions 0:41:24 0:0.0 'PCI0' (F96E5C20) 0:41:24 0:2.5 'IDEC' (F96E5CF8) 0:41:24 0:6.7 'PCI1' (F96E7630) 0:41:24 0:7.7 'PCI2' (F96E76A8) 0:41:24 0:8.7 'PCI3' (F96E7720) 0:41:24 0:10.7 'PCI4' (F96E7798) 0:41:24 0:2.0 'S962' (F96E7810) 0:41:24 0:3.0 'USB0' (F96E7E30) 0:41:24 0:3.1 'USB1' (F96E7EE0) 0:41:24 0:3.2 'USB2' (F96E7F90) 0:41:24 0:3.3 'USB3' (F96E8040) 0:41:24 0:4.0 'MAC0' (F96E80F0) 0:41:24 0:2.7 'AUD0' (F96E8140) 0:41:24 0:2.6 'AMR0' (F96E8190) 0:41:24 Bridges found: 0:41:24 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 0:41:24 0:1.0 class:604 type: 1 Bus 0->1 0:41:24 IRQLinks found: 0:41:24 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 0:41:24 A[] 0:41:24 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 0:41:24 A[] 0:41:24 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 0:41:24 A[] 0:41:24 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 0:41:24 A[] 0:41:24 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 0:41:24 A[] 0:41:24 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 0:41:24 A[] 0:41:24 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 0:41:24 A[] 0:41:24 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 0:41:24 A[] 0:41:24 PCI devices found: 0:41:24 0:0.0 1039:648 'PCI0' 0:41:24 0:1.0 1039:1 0:41:24 0:2.0 1039:8 'S962' 0:41:24 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:41:24 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:41:24 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 0:41:24 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 0:41:24 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 0:41:24 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 0:41:24 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 0:41:24 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:41:24 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:41:24 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:41:24 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:41:24 Bus detected - 1 0:41:24 ** AcpiInstall Power Device Status = 0 0:41:24 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 0:41:24 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 0:41:24 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 0:41:24 ** AcpiInstall PMTimer Device Status = 0 0:41:24 ** Total use:94208 unuse:9016 count:1573 ** 0:41:24 Event [_L13] Install GPE0x13 0:41:24 Event [_L0E] Install GPE0xE 0:41:24 Event [_L04] Install GPE0x4 0:41:24 Event [_L07] Install GPE0x7 0:41:24 Event [_L06] Install GPE0x6 0:41:24 Event [_L05] Install GPE0x5 0:41:24 Event [_L08] Install GPE0x8 0:41:24 Event [_L0F] Install GPE0xF 0:41:24 Event [_L0D] Install GPE0xD 0:41:24 Event [_L0B] Install GPE0xB 0:41:24 Event [_L0C] Install GPE0xC 0:41:24 EndScan GPE Status 0 0:41:27 APM: PSD find success. PSD Ftable:F97402BC 0:41:27 APM:Max C state 0 0:41:27 Register Notify 1st FD05929D 0:41:30 FindPCIDevice 0:41:30 Need: B:0x0 D:0x2 F:0x5 0:41:30 Finding APIC0 PIC11 Dev: [IDEC] 0:42:1 Uniaud32: PSD find success. PSD Ftable:F97402BC 0:42:1 FindPCIDevice 0:42:1 Need: B:0x0 D:0x2 F:0x0 0:42:2 APM: End scan power object 0:42:6 ===== Info ======== 0:42:6 Int Level 9 0:42:6 In Xrupt F96EFDB8 in arg F96EFDB8 0:42:6 Node 0:42:6 Name [_GPE] 0:42:6 Flags: 0x0 0:42:6 Reg count 2 0:42:6 GPE0x4 Type: Wake 0:42:6 GPE0x5 Type: Wake 0:42:6 GPE0x6 Type: Wake 0:42:6 GPE0x7 Type: Wake 0:42:6 GPE0x8 Type: Wake 0:42:6 GPE0xB Type: Wake 0:42:6 GPE0xC Type: Wake 0:42:6 GPE0xD Type: Wake 0:42:6 GPE0xE Type: Wake 0:42:6 GPE0xF Type: Wake 0:42:6 ===== Info ======== 0:42:6 Int Level 9 0:42:6 In Xrupt F96EFDB8 in arg F96EFF30 0:42:6 Node 0:42:6 Name [_GPE] 0:42:6 Flags: 0x0 0:42:6 Reg count 2 0:42:6 GPE0x3 Type: Wake 0:42:11 ** Event tread ** 0:42:11 AllocateSuspendMemory s_cpu:0 0:42:11 Alloc s_cpu OK CPU0 2304 bytes at B 0:42:11 AllocSuspend: CPU0 CR3:1FF000 0:42:11 Status 1Mb alloc 0 09 Jul 00:42:11 acpica$ log is reading 0:42:11 APM: Setting suspend state:3 0:42:11 APM:Max C state 2 09 Jul 20:15:38 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 20:14:51 CFG: Link [LNKE] IRQ5 20:14:51 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 20:14:51 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 20:14:51 AcpiOsPredefinedOverride: "_REV" 20:14:51 AcpiOsPredefinedOverride: "_OS_" 20:14:51 AcpiOsPredefinedOverride: override to eComStation 20:14:51 AcpiOsPredefinedOverride: "_GL_" 20:14:51 AcpiOsPredefinedOverride: "_OSI" 20:14:51 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 20:14:51 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:14:51 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:14:51 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 20:14:51 ACPI: FACS @ 0x7FFF0000/0x40 20:14:51 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:14:51 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 20:14:51 Table [DSDT] 20:14:51 Table [FACS] 20:14:51 Table [FACP] 20:14:51 Table [APIC] 20:14:51 Local APIC address: FEE00000h 20:14:51 System also has 8259 20:14:51 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 20:14:51 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 20:14:51 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 20:14:51 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 20:14:51 Size of FACDT 244 20:14:51 Type of computer - Unspecified 20:14:51 System vector the SCI interrupt is wired to in 8259 mode. 9 20:14:51 System port address of the SMI Command Port 0x1048 20:14:51 The value to write to SMI_CMD to disable SMI 0x81 20:14:51 The value to write to SMI_CMD to re-enable SMI 0x80 20:14:51 The value to write to SMI_CMD to enter the S4BIOS state 0x0 20:14:51 System port address of the PM1a Event Register Block 1000 20:14:51 System port address of the PM1b Event Register Block 0 20:14:51 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 20:14:51 System port address of the PM1a Control Register Block 1004 20:14:51 System port address of the PM1b Control Register Block 0 20:14:51 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 20:14:51 System port address of the PM2 Control Register Block 1016 20:14:51 Number of bytes decoded by PM2_CNT_BLK 1 20:14:51 System port address of the Power Management Timer Control Register Block 1008 20:14:51 Number of bytes decoded by PM_TMR_BLK (=4) 4 20:14:51 System port address of General-Purpose Event 0 Register Block 1020 20:14:51 System port address of General-Purpose Event 1 Register Block 1030 20:14:51 Number of bytes decoded by GPE0_BLK 0x4 20:14:51 Number of bytes decoded by GPE1_BLK 0x4 20:14:51 Offset within the ACPI general-purpose event model where GPE1 based events start 10 20:14:51 The worst-case hardware latency to enter and exit a C2 state 90 us 20:14:51 The worst-case hardware latency to enter and exit a C3 state 900 us 20:14:51 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 20:14:51 The RTC CMOS RAM index to the day-of-month alarm value 126 20:14:51 The RTC CMOS RAM index to the month of year alarm value 127 20:14:51 IA-PC Boot Architecture Flags 0x0 20:14:51 Fixed feature flags 4A5 20:14:51 The reset register: 20:14:51 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 20:14:51 The value to write to the RESET_REG port to reset the system 0 20:14:51 ***** Throttl Width 0 Offset 1 20:14:51 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 20:14:51 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 20:14:51 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 20:14:51 ** Scan EC Status = 0 Find 0 EC 20:14:51 ** AcpiInitializeObjects mask:0 Status = 0 20:14:51 Processor [CPU0] 20:14:51 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 20:14:51 Status Evaluate Processor 0x0 AE_OK 20:14:51 Usable:1 Counter:0 20:14:51 CPU id to N:0 20:14:51 ProcId: 0x0 20:14:51 P_BLK: 0x0 20:14:51 P_BLK len: 0x0 20:14:51 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 20:14:51 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 20:14:51 Found bridge "PCI0" BBN is absent status:5 20:14:51 Finding:0 bridges 20:14:51 0:0.0 Class:600 Hdr:80 Bridge H->0 20:14:51 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 20:14:51 0:2.0 Class:601 Hdr:80 20:14:51 0:2.3 Class:C00 Hdr:0 20:14:51 0:2.5 Class:101 Hdr:0 20:14:51 0:2.7 Class:401 Hdr:0 20:14:51 0:3.0 Class:C03 Hdr:80 20:14:51 0:3.1 Class:C03 Hdr:0 20:14:51 0:3.2 Class:C03 Hdr:0 20:14:51 0:3.3 Class:C03 Hdr:0 20:14:51 0:4.0 Class:200 Hdr:0 20:14:51 0:8.0 Class:480 Hdr:0 20:14:51 0:10.0 Class:780 Hdr:0 20:14:51 1:0.0 Class:300 Hdr:0 20:14:51 PCI Bus scan: 2 PCI buses found. 20:14:51 Scan ACPI tree for PCI functions 20:14:51 0:0.0 'PCI0' (F96E5C20) 20:14:51 0:2.5 'IDEC' (F96E5CF8) 20:14:51 0:6.7 'PCI1' (F96E7630) 20:14:51 0:7.7 'PCI2' (F96E76A8) 20:14:51 0:8.7 'PCI3' (F96E7720) 20:14:51 0:10.7 'PCI4' (F96E7798) 20:14:51 0:2.0 'S962' (F96E7810) 20:14:51 0:3.0 'USB0' (F96E7E30) 20:14:51 0:3.1 'USB1' (F96E7EE0) 20:14:51 0:3.2 'USB2' (F96E7F90) 20:14:51 0:3.3 'USB3' (F96E8040) 20:14:51 0:4.0 'MAC0' (F96E80F0) 20:14:51 0:2.7 'AUD0' (F96E8140) 20:14:51 0:2.6 'AMR0' (F96E8190) 20:14:51 Bridges found: 20:14:51 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 20:14:51 0:1.0 class:604 type: 1 Bus 0->1 20:14:51 IRQLinks found: 20:14:51 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 20:14:51 A[] 20:14:51 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 20:14:51 A[] 20:14:51 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 20:14:51 A[] 20:14:51 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 20:14:51 A[] 20:14:51 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 20:14:51 A[] 20:14:51 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 20:14:51 A[] 20:14:51 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 20:14:51 A[] 20:14:51 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 20:14:51 A[] 20:14:51 PCI devices found: 20:14:51 0:0.0 1039:648 'PCI0' 20:14:51 0:1.0 1039:1 20:14:51 0:2.0 1039:8 'S962' 20:14:51 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 20:14:51 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 20:14:51 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 20:14:51 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 20:14:51 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 20:14:51 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 20:14:51 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 20:14:51 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 20:14:51 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 20:14:51 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 20:14:51 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 20:14:51 Bus detected - 1 20:14:51 ** AcpiInstall Power Device Status = 0 20:14:51 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 20:14:51 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 20:14:51 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 20:14:51 ** AcpiInstall PMTimer Device Status = 0 20:14:51 ** Total use:94208 unuse:9016 count:1573 ** 20:14:51 Event [_L13] Install GPE0x13 20:14:51 Event [_L0E] Install GPE0xE 20:14:51 Event [_L04] Install GPE0x4 20:14:51 Event [_L07] Install GPE0x7 20:14:51 Event [_L06] Install GPE0x6 20:14:51 Event [_L05] Install GPE0x5 20:14:51 Event [_L08] Install GPE0x8 20:14:51 Event [_L0F] Install GPE0xF 20:14:51 Event [_L0D] Install GPE0xD 20:14:51 Event [_L0B] Install GPE0xB 20:14:51 Event [_L0C] Install GPE0xC 20:14:51 EndScan GPE Status 0 20:14:55 APM: PSD find success. PSD Ftable:F97402BC 20:14:55 APM:Max C state 0 20:14:55 Register Notify 1st FD05929D 20:14:57 FindPCIDevice 20:14:57 Need: B:0x0 D:0x2 F:0x5 20:14:57 Finding APIC0 PIC11 Dev: [IDEC] 20:15:28 Uniaud32: PSD find success. PSD Ftable:F97402BC 20:15:28 FindPCIDevice 20:15:28 Need: B:0x0 D:0x2 F:0x0 20:15:30 APM: End scan power object 20:15:33 ===== Info ======== 20:15:33 Int Level 9 20:15:33 In Xrupt F96EFDB8 in arg F96EFDB8 20:15:33 Node 20:15:33 Name [_GPE] 20:15:33 Flags: 0x0 20:15:33 Reg count 2 20:15:33 GPE0x4 Type: Wake 20:15:33 GPE0x5 Type: Wake 20:15:33 GPE0x6 Type: Wake 20:15:33 GPE0x7 Type: Wake 20:15:33 GPE0x8 Type: Wake 20:15:33 GPE0xB Type: Wake 20:15:33 GPE0xC Type: Wake 20:15:33 GPE0xD Type: Wake 20:15:33 GPE0xE Type: Wake 20:15:33 GPE0xF Type: Wake 20:15:33 ===== Info ======== 20:15:33 Int Level 9 20:15:33 In Xrupt F96EFDB8 in arg F96EFF30 20:15:33 Node 20:15:33 Name [_GPE] 20:15:33 Flags: 0x0 20:15:33 Reg count 2 20:15:33 GPE0x3 Type: Wake 20:15:38 ** Event tread ** 20:15:38 AllocateSuspendMemory s_cpu:0 20:15:38 Alloc s_cpu OK CPU0 2304 bytes at 26 20:15:38 AllocSuspend: CPU0 CR3:1FF000 20:15:38 Status 1Mb alloc 0 09 Jul 20:15:39 acpica$ log is reading 20:15:39 APM: Setting suspend state:3 20:15:39 APM:Max C state 2 10 Jul 00:41:26 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 0:40:36 CFG: Link [LNKE] IRQ5 0:40:36 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 0:40:36 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 0:40:36 AcpiOsPredefinedOverride: "_REV" 0:40:36 AcpiOsPredefinedOverride: "_OS_" 0:40:36 AcpiOsPredefinedOverride: override to eComStation 0:40:36 AcpiOsPredefinedOverride: "_GL_" 0:40:36 AcpiOsPredefinedOverride: "_OSI" 0:40:36 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 0:40:36 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:40:36 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:40:36 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 0:40:36 ACPI: FACS @ 0x7FFF0000/0x40 0:40:36 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:40:36 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 0:40:36 Table [DSDT] 0:40:36 Table [FACS] 0:40:36 Table [FACP] 0:40:36 Table [APIC] 0:40:36 Local APIC address: FEE00000h 0:40:36 System also has 8259 0:40:36 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 0:40:36 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 0:40:36 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 0:40:36 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 0:40:36 Size of FACDT 244 0:40:36 Type of computer - Unspecified 0:40:36 System vector the SCI interrupt is wired to in 8259 mode. 9 0:40:36 System port address of the SMI Command Port 0x1048 0:40:36 The value to write to SMI_CMD to disable SMI 0x81 0:40:36 The value to write to SMI_CMD to re-enable SMI 0x80 0:40:36 The value to write to SMI_CMD to enter the S4BIOS state 0x0 0:40:36 System port address of the PM1a Event Register Block 1000 0:40:36 System port address of the PM1b Event Register Block 0 0:40:36 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 0:40:36 System port address of the PM1a Control Register Block 1004 0:40:36 System port address of the PM1b Control Register Block 0 0:40:36 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 0:40:36 System port address of the PM2 Control Register Block 1016 0:40:36 Number of bytes decoded by PM2_CNT_BLK 1 0:40:36 System port address of the Power Management Timer Control Register Block 1008 0:40:36 Number of bytes decoded by PM_TMR_BLK (=4) 4 0:40:36 System port address of General-Purpose Event 0 Register Block 1020 0:40:36 System port address of General-Purpose Event 1 Register Block 1030 0:40:36 Number of bytes decoded by GPE0_BLK 0x4 0:40:36 Number of bytes decoded by GPE1_BLK 0x4 0:40:36 Offset within the ACPI general-purpose event model where GPE1 based events start 10 0:40:36 The worst-case hardware latency to enter and exit a C2 state 90 us 0:40:36 The worst-case hardware latency to enter and exit a C3 state 900 us 0:40:36 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 0:40:36 The RTC CMOS RAM index to the day-of-month alarm value 126 0:40:36 The RTC CMOS RAM index to the month of year alarm value 127 0:40:36 IA-PC Boot Architecture Flags 0x0 0:40:36 Fixed feature flags 4A5 0:40:36 The reset register: 0:40:36 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 0:40:36 The value to write to the RESET_REG port to reset the system 0 0:40:36 ***** Throttl Width 0 Offset 1 0:40:36 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 0:40:36 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:40:36 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:40:36 ** Scan EC Status = 0 Find 0 EC 0:40:36 ** AcpiInitializeObjects mask:0 Status = 0 0:40:36 Processor [CPU0] 0:40:36 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 0:40:36 Status Evaluate Processor 0x0 AE_OK 0:40:36 Usable:1 Counter:0 0:40:36 CPU id to N:0 0:40:36 ProcId: 0x0 0:40:36 P_BLK: 0x0 0:40:36 P_BLK len: 0x0 0:40:36 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 0:40:36 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 0:40:36 Found bridge "PCI0" BBN is absent status:5 0:40:36 Finding:0 bridges 0:40:36 0:0.0 Class:600 Hdr:80 Bridge H->0 0:40:36 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 0:40:36 0:2.0 Class:601 Hdr:80 0:40:36 0:2.3 Class:C00 Hdr:0 0:40:36 0:2.5 Class:101 Hdr:0 0:40:36 0:2.7 Class:401 Hdr:0 0:40:36 0:3.0 Class:C03 Hdr:80 0:40:36 0:3.1 Class:C03 Hdr:0 0:40:36 0:3.2 Class:C03 Hdr:0 0:40:36 0:3.3 Class:C03 Hdr:0 0:40:36 0:4.0 Class:200 Hdr:0 0:40:36 0:8.0 Class:480 Hdr:0 0:40:36 0:10.0 Class:780 Hdr:0 0:40:36 1:0.0 Class:300 Hdr:0 0:40:36 PCI Bus scan: 2 PCI buses found. 0:40:36 Scan ACPI tree for PCI functions 0:40:36 0:0.0 'PCI0' (F96E5C20) 0:40:36 0:2.5 'IDEC' (F96E5CF8) 0:40:36 0:6.7 'PCI1' (F96E7630) 0:40:36 0:7.7 'PCI2' (F96E76A8) 0:40:36 0:8.7 'PCI3' (F96E7720) 0:40:36 0:10.7 'PCI4' (F96E7798) 0:40:36 0:2.0 'S962' (F96E7810) 0:40:36 0:3.0 'USB0' (F96E7E30) 0:40:36 0:3.1 'USB1' (F96E7EE0) 0:40:36 0:3.2 'USB2' (F96E7F90) 0:40:36 0:3.3 'USB3' (F96E8040) 0:40:36 0:4.0 'MAC0' (F96E80F0) 0:40:36 0:2.7 'AUD0' (F96E8140) 0:40:36 0:2.6 'AMR0' (F96E8190) 0:40:36 Bridges found: 0:40:36 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 0:40:36 0:1.0 class:604 type: 1 Bus 0->1 0:40:36 IRQLinks found: 0:40:36 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 0:40:36 A[] 0:40:36 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 0:40:36 A[] 0:40:36 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 0:40:36 A[] 0:40:36 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 0:40:36 A[] 0:40:36 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 0:40:36 A[] 0:40:36 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 0:40:36 A[] 0:40:36 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 0:40:36 A[] 0:40:36 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 0:40:36 A[] 0:40:36 PCI devices found: 0:40:36 0:0.0 1039:648 'PCI0' 0:40:36 0:1.0 1039:1 0:40:36 0:2.0 1039:8 'S962' 0:40:36 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:40:36 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:40:36 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 0:40:36 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 0:40:36 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 0:40:36 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 0:40:36 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 0:40:36 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:40:36 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:40:36 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:40:36 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:40:36 Bus detected - 1 0:40:36 ** AcpiInstall Power Device Status = 0 0:40:36 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 0:40:36 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 0:40:36 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 0:40:36 ** AcpiInstall PMTimer Device Status = 0 0:40:36 ** Total use:94208 unuse:9016 count:1573 ** 0:40:36 Event [_L13] Install GPE0x13 0:40:36 Event [_L0E] Install GPE0xE 0:40:36 Event [_L04] Install GPE0x4 0:40:36 Event [_L07] Install GPE0x7 0:40:36 Event [_L06] Install GPE0x6 0:40:36 Event [_L05] Install GPE0x5 0:40:36 Event [_L08] Install GPE0x8 0:40:36 Event [_L0F] Install GPE0xF 0:40:36 Event [_L0D] Install GPE0xD 0:40:36 Event [_L0B] Install GPE0xB 0:40:36 Event [_L0C] Install GPE0xC 0:40:36 EndScan GPE Status 0 0:40:40 APM: PSD find success. PSD Ftable:F97402BC 0:40:40 APM:Max C state 0 0:40:40 Register Notify 1st FD05929D 0:40:43 FindPCIDevice 0:40:43 Need: B:0x0 D:0x2 F:0x5 0:40:43 Finding APIC0 PIC11 Dev: [IDEC] 0:41:13 Uniaud32: PSD find success. PSD Ftable:F97402BC 0:41:13 FindPCIDevice 0:41:13 Need: B:0x0 D:0x2 F:0x0 0:41:15 APM: End scan power object 0:41:19 ===== Info ======== 0:41:19 Int Level 9 0:41:19 In Xrupt F96EFDB8 in arg F96EFDB8 0:41:19 Node 0:41:19 Name [_GPE] 0:41:19 Flags: 0x0 0:41:19 Reg count 2 0:41:19 GPE0x4 Type: Wake 0:41:19 GPE0x5 Type: Wake 0:41:19 GPE0x6 Type: Wake 0:41:19 GPE0x7 Type: Wake 0:41:19 GPE0x8 Type: Wake 0:41:19 GPE0xB Type: Wake 0:41:19 GPE0xC Type: Wake 0:41:19 GPE0xD Type: Wake 0:41:19 GPE0xE Type: Wake 0:41:19 GPE0xF Type: Wake 0:41:19 ===== Info ======== 0:41:19 Int Level 9 0:41:19 In Xrupt F96EFDB8 in arg F96EFF30 0:41:19 Node 0:41:19 Name [_GPE] 0:41:19 Flags: 0x0 0:41:19 Reg count 2 0:41:19 GPE0x3 Type: Wake 0:41:26 ** Event tread ** 0:41:26 AllocateSuspendMemory s_cpu:0 0:41:26 Alloc s_cpu OK CPU0 2304 bytes at 1A 0:41:26 AllocSuspend: CPU0 CR3:1FF000 0:41:26 Status 1Mb alloc 0 10 Jul 00:41:26 acpica$ log is reading 0:41:26 APM: Setting suspend state:3 0:41:26 APM:Max C state 2 10 Jul 00:45:44 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 0:44:55 CFG: Link [LNKE] IRQ5 0:44:55 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 0:44:55 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 0:44:55 AcpiOsPredefinedOverride: "_REV" 0:44:55 AcpiOsPredefinedOverride: "_OS_" 0:44:55 AcpiOsPredefinedOverride: override to eComStation 0:44:55 AcpiOsPredefinedOverride: "_GL_" 0:44:55 AcpiOsPredefinedOverride: "_OSI" 0:44:55 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 0:44:55 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:44:55 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:44:55 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 0:44:55 ACPI: FACS @ 0x7FFF0000/0x40 0:44:55 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 0:44:55 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 0:44:55 Table [DSDT] 0:44:55 Table [FACS] 0:44:55 Table [FACP] 0:44:55 Table [APIC] 0:44:55 Local APIC address: FEE00000h 0:44:55 System also has 8259 0:44:55 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 0:44:55 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 0:44:55 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 0:44:55 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 0:44:55 Size of FACDT 244 0:44:55 Type of computer - Unspecified 0:44:55 System vector the SCI interrupt is wired to in 8259 mode. 9 0:44:55 System port address of the SMI Command Port 0x1048 0:44:55 The value to write to SMI_CMD to disable SMI 0x81 0:44:55 The value to write to SMI_CMD to re-enable SMI 0x80 0:44:55 The value to write to SMI_CMD to enter the S4BIOS state 0x0 0:44:55 System port address of the PM1a Event Register Block 1000 0:44:55 System port address of the PM1b Event Register Block 0 0:44:55 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 0:44:55 System port address of the PM1a Control Register Block 1004 0:44:55 System port address of the PM1b Control Register Block 0 0:44:55 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 0:44:55 System port address of the PM2 Control Register Block 1016 0:44:55 Number of bytes decoded by PM2_CNT_BLK 1 0:44:55 System port address of the Power Management Timer Control Register Block 1008 0:44:55 Number of bytes decoded by PM_TMR_BLK (=4) 4 0:44:55 System port address of General-Purpose Event 0 Register Block 1020 0:44:55 System port address of General-Purpose Event 1 Register Block 1030 0:44:55 Number of bytes decoded by GPE0_BLK 0x4 0:44:55 Number of bytes decoded by GPE1_BLK 0x4 0:44:55 Offset within the ACPI general-purpose event model where GPE1 based events start 10 0:44:55 The worst-case hardware latency to enter and exit a C2 state 90 us 0:44:55 The worst-case hardware latency to enter and exit a C3 state 900 us 0:44:55 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 0:44:55 The RTC CMOS RAM index to the day-of-month alarm value 126 0:44:55 The RTC CMOS RAM index to the month of year alarm value 127 0:44:55 IA-PC Boot Architecture Flags 0x0 0:44:55 Fixed feature flags 4A5 0:44:55 The reset register: 0:44:55 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 0:44:55 The value to write to the RESET_REG port to reset the system 0 0:44:55 ***** Throttl Width 0 Offset 1 0:44:55 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 0:44:55 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:44:55 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 0:44:55 ** Scan EC Status = 0 Find 0 EC 0:44:55 ** AcpiInitializeObjects mask:0 Status = 0 0:44:55 Processor [CPU0] 0:44:55 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 0:44:55 Status Evaluate Processor 0x0 AE_OK 0:44:55 Usable:1 Counter:0 0:44:55 CPU id to N:0 0:44:55 ProcId: 0x0 0:44:55 P_BLK: 0x0 0:44:55 P_BLK len: 0x0 0:44:55 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 0:44:55 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 0:44:55 Found bridge "PCI0" BBN is absent status:5 0:44:55 Finding:0 bridges 0:44:55 0:0.0 Class:600 Hdr:80 Bridge H->0 0:44:55 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 0:44:55 0:2.0 Class:601 Hdr:80 0:44:55 0:2.3 Class:C00 Hdr:0 0:44:55 0:2.5 Class:101 Hdr:0 0:44:55 0:2.7 Class:401 Hdr:0 0:44:55 0:3.0 Class:C03 Hdr:80 0:44:55 0:3.1 Class:C03 Hdr:0 0:44:55 0:3.2 Class:C03 Hdr:0 0:44:55 0:3.3 Class:C03 Hdr:0 0:44:55 0:4.0 Class:200 Hdr:0 0:44:55 0:8.0 Class:480 Hdr:0 0:44:55 0:10.0 Class:780 Hdr:0 0:44:55 1:0.0 Class:300 Hdr:0 0:44:55 PCI Bus scan: 2 PCI buses found. 0:44:55 Scan ACPI tree for PCI functions 0:44:55 0:0.0 'PCI0' (F96E5C20) 0:44:55 0:2.5 'IDEC' (F96E5CF8) 0:44:55 0:6.7 'PCI1' (F96E7630) 0:44:55 0:7.7 'PCI2' (F96E76A8) 0:44:55 0:8.7 'PCI3' (F96E7720) 0:44:55 0:10.7 'PCI4' (F96E7798) 0:44:55 0:2.0 'S962' (F96E7810) 0:44:55 0:3.0 'USB0' (F96E7E30) 0:44:55 0:3.1 'USB1' (F96E7EE0) 0:44:55 0:3.2 'USB2' (F96E7F90) 0:44:55 0:3.3 'USB3' (F96E8040) 0:44:55 0:4.0 'MAC0' (F96E80F0) 0:44:55 0:2.7 'AUD0' (F96E8140) 0:44:55 0:2.6 'AMR0' (F96E8190) 0:44:55 Bridges found: 0:44:55 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 0:44:55 0:1.0 class:604 type: 1 Bus 0->1 0:44:55 IRQLinks found: 0:44:55 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 0:44:55 A[] 0:44:55 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 0:44:55 A[] 0:44:55 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 0:44:55 A[] 0:44:55 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 0:44:55 A[] 0:44:55 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 0:44:55 A[] 0:44:55 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 0:44:55 A[] 0:44:55 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 0:44:55 A[] 0:44:55 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 0:44:55 A[] 0:44:55 PCI devices found: 0:44:55 0:0.0 1039:648 'PCI0' 0:44:55 0:1.0 1039:1 0:44:55 0:2.0 1039:8 'S962' 0:44:55 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:44:55 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:44:55 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 0:44:55 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 0:44:55 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 0:44:55 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 0:44:55 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 0:44:55 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:44:55 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 0:44:55 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 0:44:55 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 0:44:55 Bus detected - 1 0:44:55 ** AcpiInstall Power Device Status = 0 0:44:55 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 0:44:55 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 0:44:55 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 0:44:55 ** AcpiInstall PMTimer Device Status = 0 0:44:55 ** Total use:94208 unuse:9016 count:1573 ** 0:44:55 Event [_L13] Install GPE0x13 0:44:55 Event [_L0E] Install GPE0xE 0:44:55 Event [_L04] Install GPE0x4 0:44:55 Event [_L07] Install GPE0x7 0:44:55 Event [_L06] Install GPE0x6 0:44:55 Event [_L05] Install GPE0x5 0:44:55 Event [_L08] Install GPE0x8 0:44:55 Event [_L0F] Install GPE0xF 0:44:55 Event [_L0D] Install GPE0xD 0:44:55 Event [_L0B] Install GPE0xB 0:44:55 Event [_L0C] Install GPE0xC 0:44:55 EndScan GPE Status 0 0:44:59 APM: PSD find success. PSD Ftable:F97402BC 0:44:59 APM:Max C state 0 0:44:59 Register Notify 1st FD05929D 0:45:1 FindPCIDevice 0:45:1 Need: B:0x0 D:0x2 F:0x5 0:45:1 Finding APIC0 PIC11 Dev: [IDEC] 0:45:32 Uniaud32: PSD find success. PSD Ftable:F97402BC 0:45:32 FindPCIDevice 0:45:32 Need: B:0x0 D:0x2 F:0x0 0:45:34 APM: End scan power object 0:45:37 ===== Info ======== 0:45:37 Int Level 9 0:45:37 In Xrupt F96EFDB8 in arg F96EFDB8 0:45:37 Node 0:45:37 Name [_GPE] 0:45:37 Flags: 0x0 0:45:37 Reg count 2 0:45:37 GPE0x4 Type: Wake 0:45:37 GPE0x5 Type: Wake 0:45:37 GPE0x6 Type: Wake 0:45:37 GPE0x7 Type: Wake 0:45:37 GPE0x8 Type: Wake 0:45:37 GPE0xB Type: Wake 0:45:37 GPE0xC Type: Wake 0:45:37 GPE0xD Type: Wake 0:45:37 GPE0xE Type: Wake 0:45:37 GPE0xF Type: Wake 0:45:37 ===== Info ======== 0:45:37 Int Level 9 0:45:37 In Xrupt F96EFDB8 in arg F96EFF30 0:45:37 Node 0:45:37 Name [_GPE] 0:45:37 Flags: 0x0 0:45:37 Reg count 2 0:45:37 GPE0x3 Type: Wake 0:45:44 ** Event tread ** 0:45:44 AllocateSuspendMemory s_cpu:0 0:45:44 Alloc s_cpu OK CPU0 2304 bytes at 2C 0:45:44 AllocSuspend: CPU0 CR3:1FF000 0:45:44 Status 1Mb alloc 0 10 Jul 00:45:44 acpica$ log is reading 0:45:44 APM: Setting suspend state:3 0:45:44 APM:Max C state 2 10 Jul 20:27:08 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 20:26:19 CFG: Link [LNKE] IRQ5 20:26:19 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 20:26:19 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 20:26:19 AcpiOsPredefinedOverride: "_REV" 20:26:19 AcpiOsPredefinedOverride: "_OS_" 20:26:19 AcpiOsPredefinedOverride: override to eComStation 20:26:19 AcpiOsPredefinedOverride: "_GL_" 20:26:19 AcpiOsPredefinedOverride: "_OSI" 20:26:19 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 20:26:19 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:26:19 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:26:19 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 20:26:19 ACPI: FACS @ 0x7FFF0000/0x40 20:26:19 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 20:26:19 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 20:26:19 Table [DSDT] 20:26:19 Table [FACS] 20:26:19 Table [FACP] 20:26:19 Table [APIC] 20:26:19 Local APIC address: FEE00000h 20:26:19 System also has 8259 20:26:19 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 20:26:19 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 20:26:19 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 20:26:19 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 20:26:19 Size of FACDT 244 20:26:19 Type of computer - Unspecified 20:26:19 System vector the SCI interrupt is wired to in 8259 mode. 9 20:26:19 System port address of the SMI Command Port 0x1048 20:26:19 The value to write to SMI_CMD to disable SMI 0x81 20:26:19 The value to write to SMI_CMD to re-enable SMI 0x80 20:26:19 The value to write to SMI_CMD to enter the S4BIOS state 0x0 20:26:19 System port address of the PM1a Event Register Block 1000 20:26:19 System port address of the PM1b Event Register Block 0 20:26:19 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 20:26:19 System port address of the PM1a Control Register Block 1004 20:26:19 System port address of the PM1b Control Register Block 0 20:26:19 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 20:26:19 System port address of the PM2 Control Register Block 1016 20:26:19 Number of bytes decoded by PM2_CNT_BLK 1 20:26:19 System port address of the Power Management Timer Control Register Block 1008 20:26:19 Number of bytes decoded by PM_TMR_BLK (=4) 4 20:26:19 System port address of General-Purpose Event 0 Register Block 1020 20:26:19 System port address of General-Purpose Event 1 Register Block 1030 20:26:19 Number of bytes decoded by GPE0_BLK 0x4 20:26:19 Number of bytes decoded by GPE1_BLK 0x4 20:26:19 Offset within the ACPI general-purpose event model where GPE1 based events start 10 20:26:19 The worst-case hardware latency to enter and exit a C2 state 90 us 20:26:19 The worst-case hardware latency to enter and exit a C3 state 900 us 20:26:19 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 20:26:19 The RTC CMOS RAM index to the day-of-month alarm value 126 20:26:19 The RTC CMOS RAM index to the month of year alarm value 127 20:26:19 IA-PC Boot Architecture Flags 0x0 20:26:19 Fixed feature flags 4A5 20:26:19 The reset register: 20:26:19 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 20:26:19 The value to write to the RESET_REG port to reset the system 0 20:26:19 ***** Throttl Width 0 Offset 1 20:26:19 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 20:26:19 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 20:26:19 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 20:26:19 ** Scan EC Status = 0 Find 0 EC 20:26:19 ** AcpiInitializeObjects mask:0 Status = 0 20:26:19 Processor [CPU0] 20:26:19 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 20:26:19 Status Evaluate Processor 0x0 AE_OK 20:26:19 Usable:1 Counter:0 20:26:19 CPU id to N:0 20:26:19 ProcId: 0x0 20:26:19 P_BLK: 0x0 20:26:19 P_BLK len: 0x0 20:26:19 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 20:26:19 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 20:26:19 Found bridge "PCI0" BBN is absent status:5 20:26:19 Finding:0 bridges 20:26:19 0:0.0 Class:600 Hdr:80 Bridge H->0 20:26:19 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 20:26:19 0:2.0 Class:601 Hdr:80 20:26:19 0:2.3 Class:C00 Hdr:0 20:26:19 0:2.5 Class:101 Hdr:0 20:26:19 0:2.7 Class:401 Hdr:0 20:26:19 0:3.0 Class:C03 Hdr:80 20:26:19 0:3.1 Class:C03 Hdr:0 20:26:19 0:3.2 Class:C03 Hdr:0 20:26:19 0:3.3 Class:C03 Hdr:0 20:26:19 0:4.0 Class:200 Hdr:0 20:26:19 0:8.0 Class:480 Hdr:0 20:26:19 0:10.0 Class:780 Hdr:0 20:26:19 1:0.0 Class:300 Hdr:0 20:26:19 PCI Bus scan: 2 PCI buses found. 20:26:19 Scan ACPI tree for PCI functions 20:26:19 0:0.0 'PCI0' (F96E5C20) 20:26:19 0:2.5 'IDEC' (F96E5CF8) 20:26:19 0:6.7 'PCI1' (F96E7630) 20:26:19 0:7.7 'PCI2' (F96E76A8) 20:26:19 0:8.7 'PCI3' (F96E7720) 20:26:19 0:10.7 'PCI4' (F96E7798) 20:26:19 0:2.0 'S962' (F96E7810) 20:26:19 0:3.0 'USB0' (F96E7E30) 20:26:19 0:3.1 'USB1' (F96E7EE0) 20:26:19 0:3.2 'USB2' (F96E7F90) 20:26:19 0:3.3 'USB3' (F96E8040) 20:26:19 0:4.0 'MAC0' (F96E80F0) 20:26:19 0:2.7 'AUD0' (F96E8140) 20:26:19 0:2.6 'AMR0' (F96E8190) 20:26:19 Bridges found: 20:26:19 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 20:26:19 0:1.0 class:604 type: 1 Bus 0->1 20:26:19 IRQLinks found: 20:26:19 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 20:26:19 A[] 20:26:19 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 20:26:19 A[] 20:26:19 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 20:26:19 A[] 20:26:19 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 20:26:19 A[] 20:26:19 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 20:26:19 A[] 20:26:19 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 20:26:19 A[] 20:26:19 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 20:26:19 A[] 20:26:19 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 20:26:19 A[] 20:26:19 PCI devices found: 20:26:19 0:0.0 1039:648 'PCI0' 20:26:19 0:1.0 1039:1 20:26:19 0:2.0 1039:8 'S962' 20:26:19 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 20:26:19 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 20:26:19 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 20:26:19 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 20:26:19 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 20:26:19 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 20:26:19 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 20:26:19 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 20:26:19 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 20:26:19 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 20:26:19 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 20:26:19 Bus detected - 1 20:26:19 ** AcpiInstall Power Device Status = 0 20:26:19 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 20:26:19 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 20:26:19 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 20:26:19 ** AcpiInstall PMTimer Device Status = 0 20:26:19 ** Total use:94208 unuse:9016 count:1573 ** 20:26:19 Event [_L13] Install GPE0x13 20:26:19 Event [_L0E] Install GPE0xE 20:26:19 Event [_L04] Install GPE0x4 20:26:19 Event [_L07] Install GPE0x7 20:26:19 Event [_L06] Install GPE0x6 20:26:19 Event [_L05] Install GPE0x5 20:26:19 Event [_L08] Install GPE0x8 20:26:19 Event [_L0F] Install GPE0xF 20:26:19 Event [_L0D] Install GPE0xD 20:26:19 Event [_L0B] Install GPE0xB 20:26:19 Event [_L0C] Install GPE0xC 20:26:19 EndScan GPE Status 0 20:26:22 APM: PSD find success. PSD Ftable:F97402BC 20:26:22 APM:Max C state 0 20:26:22 Register Notify 1st FD05929D 20:26:25 FindPCIDevice 20:26:25 Need: B:0x0 D:0x2 F:0x5 20:26:25 Finding APIC0 PIC11 Dev: [IDEC] 20:26:56 Uniaud32: PSD find success. PSD Ftable:F97402BC 20:26:56 FindPCIDevice 20:26:56 Need: B:0x0 D:0x2 F:0x0 20:26:58 APM: End scan power object 20:27:1 ===== Info ======== 20:27:1 Int Level 9 20:27:1 In Xrupt F96EFDB8 in arg F96EFDB8 20:27:1 Node 20:27:1 Name [_GPE] 20:27:1 Flags: 0x0 20:27:1 Reg count 2 20:27:1 GPE0x4 Type: Wake 20:27:1 GPE0x5 Type: Wake 20:27:1 GPE0x6 Type: Wake 20:27:1 GPE0x7 Type: Wake 20:27:1 GPE0x8 Type: Wake 20:27:1 GPE0xB Type: Wake 20:27:1 GPE0xC Type: Wake 20:27:1 GPE0xD Type: Wake 20:27:1 GPE0xE Type: Wake 20:27:1 GPE0xF Type: Wake 20:27:1 ===== Info ======== 20:27:1 Int Level 9 20:27:1 In Xrupt F96EFDB8 in arg F96EFF30 20:27:1 Node 20:27:1 Name [_GPE] 20:27:1 Flags: 0x0 20:27:1 Reg count 2 20:27:1 GPE0x3 Type: Wake 20:27:8 ** Event tread ** 20:27:8 AllocateSuspendMemory s_cpu:0 20:27:8 Alloc s_cpu OK CPU0 2304 bytes at 8 20:27:8 AllocSuspend: CPU0 CR3:1FF000 20:27:8 Status 1Mb alloc 0 10 Jul 20:27:08 acpica$ log is reading 20:27:8 APM: Setting suspend state:3 20:27:8 APM:Max C state 2 10 Jul 22:59:37 AcpiDaemon LID thread is starting ID 0x4 on 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 22:58:47 CFG: Link [LNKE] IRQ5 22:58:47 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 22:58:47 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 22:58:47 AcpiOsPredefinedOverride: "_REV" 22:58:47 AcpiOsPredefinedOverride: "_OS_" 22:58:47 AcpiOsPredefinedOverride: override to eComStation 22:58:47 AcpiOsPredefinedOverride: "_GL_" 22:58:47 AcpiOsPredefinedOverride: "_OSI" 22:58:47 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 22:58:47 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 22:58:47 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 22:58:47 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 22:58:47 ACPI: FACS @ 0x7FFF0000/0x40 22:58:47 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 22:58:47 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 22:58:47 Table [DSDT] 22:58:47 Table [FACS] 22:58:47 Table [FACP] 22:58:47 Table [APIC] 22:58:47 Local APIC address: FEE00000h 22:58:47 System also has 8259 22:58:47 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 22:58:47 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 22:58:47 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 22:58:47 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 22:58:47 Size of FACDT 244 22:58:47 Type of computer - Unspecified 22:58:47 System vector the SCI interrupt is wired to in 8259 mode. 9 22:58:47 System port address of the SMI Command Port 0x1048 22:58:47 The value to write to SMI_CMD to disable SMI 0x81 22:58:47 The value to write to SMI_CMD to re-enable SMI 0x80 22:58:47 The value to write to SMI_CMD to enter the S4BIOS state 0x0 22:58:47 System port address of the PM1a Event Register Block 1000 22:58:47 System port address of the PM1b Event Register Block 0 22:58:47 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 22:58:47 System port address of the PM1a Control Register Block 1004 22:58:47 System port address of the PM1b Control Register Block 0 22:58:47 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 22:58:47 System port address of the PM2 Control Register Block 1016 22:58:47 Number of bytes decoded by PM2_CNT_BLK 1 22:58:47 System port address of the Power Management Timer Control Register Block 1008 22:58:47 Number of bytes decoded by PM_TMR_BLK (=4) 4 22:58:47 System port address of General-Purpose Event 0 Register Block 1020 22:58:47 System port address of General-Purpose Event 1 Register Block 1030 22:58:47 Number of bytes decoded by GPE0_BLK 0x4 22:58:47 Number of bytes decoded by GPE1_BLK 0x4 22:58:47 Offset within the ACPI general-purpose event model where GPE1 based events start 10 22:58:47 The worst-case hardware latency to enter and exit a C2 state 90 us 22:58:47 The worst-case hardware latency to enter and exit a C3 state 900 us 22:58:47 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 22:58:47 The RTC CMOS RAM index to the day-of-month alarm value 126 22:58:47 The RTC CMOS RAM index to the month of year alarm value 127 22:58:47 IA-PC Boot Architecture Flags 0x0 22:58:47 Fixed feature flags 4A5 22:58:47 The reset register: 22:58:47 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 22:58:47 The value to write to the RESET_REG port to reset the system 0 22:58:47 ***** Throttl Width 0 Offset 1 22:58:47 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 22:58:47 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 22:58:47 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 22:58:47 ** Scan EC Status = 0 Find 0 EC 22:58:47 ** AcpiInitializeObjects mask:0 Status = 0 22:58:47 Processor [CPU0] 22:58:47 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 22:58:47 Status Evaluate Processor 0x0 AE_OK 22:58:47 Usable:1 Counter:0 22:58:47 CPU id to N:0 22:58:47 ProcId: 0x0 22:58:47 P_BLK: 0x0 22:58:47 P_BLK len: 0x0 22:58:47 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 22:58:47 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 22:58:47 Found bridge "PCI0" BBN is absent status:5 22:58:47 Finding:0 bridges 22:58:47 0:0.0 Class:600 Hdr:80 Bridge H->0 22:58:47 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 22:58:47 0:2.0 Class:601 Hdr:80 22:58:47 0:2.3 Class:C00 Hdr:0 22:58:47 0:2.5 Class:101 Hdr:0 22:58:47 0:2.7 Class:401 Hdr:0 22:58:47 0:3.0 Class:C03 Hdr:80 22:58:47 0:3.1 Class:C03 Hdr:0 22:58:47 0:3.2 Class:C03 Hdr:0 22:58:47 0:3.3 Class:C03 Hdr:0 22:58:47 0:4.0 Class:200 Hdr:0 22:58:47 0:8.0 Class:480 Hdr:0 22:58:47 0:10.0 Class:780 Hdr:0 22:58:47 1:0.0 Class:300 Hdr:0 22:58:47 PCI Bus scan: 2 PCI buses found. 22:58:47 Scan ACPI tree for PCI functions 22:58:47 0:0.0 'PCI0' (F96E5C20) 22:58:47 0:2.5 'IDEC' (F96E5CF8) 22:58:47 0:6.7 'PCI1' (F96E7630) 22:58:47 0:7.7 'PCI2' (F96E76A8) 22:58:47 0:8.7 'PCI3' (F96E7720) 22:58:47 0:10.7 'PCI4' (F96E7798) 22:58:47 0:2.0 'S962' (F96E7810) 22:58:47 0:3.0 'USB0' (F96E7E30) 22:58:47 0:3.1 'USB1' (F96E7EE0) 22:58:47 0:3.2 'USB2' (F96E7F90) 22:58:47 0:3.3 'USB3' (F96E8040) 22:58:47 0:4.0 'MAC0' (F96E80F0) 22:58:47 0:2.7 'AUD0' (F96E8140) 22:58:47 0:2.6 'AMR0' (F96E8190) 22:58:47 Bridges found: 22:58:47 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 22:58:47 0:1.0 class:604 type: 1 Bus 0->1 22:58:47 IRQLinks found: 22:58:47 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 22:58:47 A[] 22:58:47 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 22:58:47 A[] 22:58:47 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 22:58:47 A[] 22:58:47 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 22:58:47 A[] 22:58:47 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 22:58:47 A[] 22:58:47 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 22:58:47 A[] 22:58:47 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 22:58:47 A[] 22:58:47 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 22:58:47 A[] 22:58:47 PCI devices found: 22:58:47 0:0.0 1039:648 'PCI0' 22:58:47 0:1.0 1039:1 22:58:47 0:2.0 1039:8 'S962' 22:58:47 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 22:58:47 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 22:58:47 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 22:58:47 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 22:58:47 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 22:58:47 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 22:58:47 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 22:58:47 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 22:58:47 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 22:58:47 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 22:58:47 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 22:58:47 Bus detected - 1 22:58:47 ** AcpiInstall Power Device Status = 0 22:58:47 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 22:58:47 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 22:58:47 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 22:58:47 ** AcpiInstall PMTimer Device Status = 0 22:58:47 ** Total use:94208 unuse:9016 count:1573 ** 22:58:47 Event [_L13] Install GPE0x13 22:58:47 Event [_L0E] Install GPE0xE 22:58:47 Event [_L04] Install GPE0x4 22:58:47 Event [_L07] Install GPE0x7 22:58:47 Event [_L06] Install GPE0x6 22:58:47 Event [_L05] Install GPE0x5 22:58:47 Event [_L08] Install GPE0x8 22:58:47 Event [_L0F] Install GPE0xF 22:58:47 Event [_L0D] Install GPE0xD 22:58:47 Event [_L0B] Install GPE0xB 22:58:47 Event [_L0C] Install GPE0xC 22:58:47 EndScan GPE Status 0 22:58:51 APM: PSD find success. PSD Ftable:F97402BC 22:58:51 APM:Max C state 0 22:58:51 Register Notify 1st FD05929D 22:58:54 FindPCIDevice 22:58:54 Need: B:0x0 D:0x2 F:0x5 22:58:54 Finding APIC0 PIC11 Dev: [IDEC] 22:59:25 Uniaud32: PSD find success. PSD Ftable:F97402BC 22:59:25 FindPCIDevice 22:59:25 Need: B:0x0 D:0x2 F:0x0 22:59:27 APM: End scan power object 22:59:30 ===== Info ======== 22:59:30 Int Level 9 22:59:30 In Xrupt F96EFDB8 in arg F96EFDB8 22:59:30 Node 22:59:30 Name [_GPE] 22:59:30 Flags: 0x0 22:59:30 Reg count 2 22:59:30 GPE0x4 Type: Wake 22:59:30 GPE0x5 Type: Wake 22:59:30 GPE0x6 Type: Wake 22:59:30 GPE0x7 Type: Wake 22:59:30 GPE0x8 Type: Wake 22:59:30 GPE0xB Type: Wake 22:59:30 GPE0xC Type: Wake 22:59:30 GPE0xD Type: Wake 22:59:30 GPE0xE Type: Wake 22:59:30 GPE0xF Type: Wake 22:59:30 ===== Info ======== 22:59:30 Int Level 9 22:59:30 In Xrupt F96EFDB8 in arg F96EFF30 22:59:30 Node 22:59:30 Name [_GPE] 22:59:30 Flags: 0x0 22:59:30 Reg count 2 22:59:30 GPE0x3 Type: Wake 22:59:37 ** Event tread ** 22:59:37 AllocateSuspendMemory s_cpu:0 22:59:37 Alloc s_cpu OK CPU0 2304 bytes at 25 22:59:37 AllocSuspend: CPU0 CR3:1FF000 22:59:37 Status 1Mb alloc 0 10 Jul 22:59:37 acpica$ log is reading 22:59:37 APM: Setting suspend state:3 22:59:37 APM:Max C state 2 10 Jul 23:07:34 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 23:6:45 CFG: Link [LNKE] IRQ5 23:6:45 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 23:6:45 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 23:6:45 AcpiOsPredefinedOverride: "_REV" 23:6:45 AcpiOsPredefinedOverride: "_OS_" 23:6:45 AcpiOsPredefinedOverride: override to eComStation 23:6:45 AcpiOsPredefinedOverride: "_GL_" 23:6:45 AcpiOsPredefinedOverride: "_OSI" 23:6:45 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 23:6:45 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:6:45 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:6:45 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 23:6:45 ACPI: FACS @ 0x7FFF0000/0x40 23:6:45 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:6:45 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 23:6:45 Table [DSDT] 23:6:45 Table [FACS] 23:6:45 Table [FACP] 23:6:45 Table [APIC] 23:6:45 Local APIC address: FEE00000h 23:6:45 System also has 8259 23:6:45 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 23:6:45 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 23:6:45 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 23:6:45 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 23:6:45 Size of FACDT 244 23:6:45 Type of computer - Unspecified 23:6:45 System vector the SCI interrupt is wired to in 8259 mode. 9 23:6:45 System port address of the SMI Command Port 0x1048 23:6:45 The value to write to SMI_CMD to disable SMI 0x81 23:6:45 The value to write to SMI_CMD to re-enable SMI 0x80 23:6:45 The value to write to SMI_CMD to enter the S4BIOS state 0x0 23:6:45 System port address of the PM1a Event Register Block 1000 23:6:45 System port address of the PM1b Event Register Block 0 23:6:45 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 23:6:45 System port address of the PM1a Control Register Block 1004 23:6:45 System port address of the PM1b Control Register Block 0 23:6:45 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 23:6:45 System port address of the PM2 Control Register Block 1016 23:6:45 Number of bytes decoded by PM2_CNT_BLK 1 23:6:45 System port address of the Power Management Timer Control Register Block 1008 23:6:45 Number of bytes decoded by PM_TMR_BLK (=4) 4 23:6:45 System port address of General-Purpose Event 0 Register Block 1020 23:6:45 System port address of General-Purpose Event 1 Register Block 1030 23:6:45 Number of bytes decoded by GPE0_BLK 0x4 23:6:45 Number of bytes decoded by GPE1_BLK 0x4 23:6:45 Offset within the ACPI general-purpose event model where GPE1 based events start 10 23:6:45 The worst-case hardware latency to enter and exit a C2 state 90 us 23:6:45 The worst-case hardware latency to enter and exit a C3 state 900 us 23:6:45 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 23:6:45 The RTC CMOS RAM index to the day-of-month alarm value 126 23:6:45 The RTC CMOS RAM index to the month of year alarm value 127 23:6:45 IA-PC Boot Architecture Flags 0x0 23:6:45 Fixed feature flags 4A5 23:6:45 The reset register: 23:6:45 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 23:6:45 The value to write to the RESET_REG port to reset the system 0 23:6:45 ***** Throttl Width 0 Offset 1 23:6:45 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 23:6:45 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:6:45 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:6:45 ** Scan EC Status = 0 Find 0 EC 23:6:45 ** AcpiInitializeObjects mask:0 Status = 0 23:6:45 Processor [CPU0] 23:6:45 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 23:6:45 Status Evaluate Processor 0x0 AE_OK 23:6:45 Usable:1 Counter:0 23:6:45 CPU id to N:0 23:6:45 ProcId: 0x0 23:6:45 P_BLK: 0x0 23:6:45 P_BLK len: 0x0 23:6:45 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 23:6:45 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 23:6:45 ** AcpiInstall Power Device Status = 0 23:6:45 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 23:6:45 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 23:6:45 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 23:6:45 ** AcpiInstall PMTimer Device Status = 0 23:6:45 ** Total use:77360 unuse:11376 count:1533 ** 23:6:45 Event [_L13] Install GPE0x13 23:6:45 Event [_L0E] Install GPE0xE 23:6:45 Event [_L04] Install GPE0x4 23:6:45 Event [_L07] Install GPE0x7 23:6:45 Event [_L06] Install GPE0x6 23:6:45 Event [_L05] Install GPE0x5 23:6:45 Event [_L08] Install GPE0x8 23:6:45 Event [_L0F] Install GPE0xF 23:6:45 Event [_L0D] Install GPE0xD 23:6:45 Event [_L0B] Install GPE0xB 23:6:45 Event [_L0C] Install GPE0xC 23:6:45 EndScan GPE Status 0 23:6:48 APM: PSD find success. PSD Ftable:F97402BC 23:6:48 APM:Max C state 0 23:6:48 Register Notify 1st FD05929D 23:6:51 FindPCIDevice 23:7:21 Uniaud32: PSD find success. PSD Ftable:F97402BC 23:7:21 FindPCIDevice 23:7:23 APM: End scan power object 23:7:27 ===== Info ======== 23:7:27 Int Level 9 23:7:27 In Xrupt F96EFDB8 in arg F96EFDB8 23:7:27 Node 23:7:27 Name [_GPE] 23:7:27 Flags: 0x0 23:7:27 Reg count 2 23:7:27 GPE0x4 Type: Wake 23:7:27 GPE0x5 Type: Wake 23:7:27 GPE0x6 Type: Wake 23:7:27 GPE0x7 Type: Wake 23:7:27 GPE0x8 Type: Wake 23:7:27 GPE0xB Type: Wake 23:7:27 GPE0xC Type: Wake 23:7:27 GPE0xD Type: Wake 23:7:27 GPE0xE Type: Wake 23:7:27 GPE0xF Type: Wake 23:7:27 ===== Info ======== 23:7:27 Int Level 9 23:7:27 In Xrupt F96EFDB8 in arg F96EFF30 23:7:27 Node 23:7:27 Name [_GPE] 23:7:27 Flags: 0x0 23:7:27 Reg count 2 23:7:27 GPE0x3 Type: Wake 23:7:34 ** Event tread ** 23:7:34 AllocateSuspendMemory s_cpu:0 23:7:34 Alloc s_cpu OK CPU0 2304 bytes at 22 23:7:34 AllocSuspend: CPU0 CR3:1FF000 23:7:34 Status 1Mb alloc 0 10 Jul 23:07:34 acpica$ log is reading 23:7:34 APM: Setting suspend state:3 23:7:34 APM:Max C state 2 10 Jul 23:14:16 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 23:13:29 CFG: Link [LNKE] IRQ5 23:13:29 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 23:13:29 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 23:13:29 AcpiOsPredefinedOverride: "_REV" 23:13:29 AcpiOsPredefinedOverride: "_OS_" 23:13:29 AcpiOsPredefinedOverride: override to eComStation 23:13:29 AcpiOsPredefinedOverride: "_GL_" 23:13:29 AcpiOsPredefinedOverride: "_OSI" 23:13:29 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 23:13:29 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:13:29 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:13:29 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 23:13:29 ACPI: FACS @ 0x7FFF0000/0x40 23:13:29 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:13:29 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 23:13:29 Table [DSDT] 23:13:29 Table [FACS] 23:13:29 Table [FACP] 23:13:29 Table [APIC] 23:13:29 Local APIC address: FEE00000h 23:13:29 System also has 8259 23:13:29 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 23:13:29 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 23:13:29 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 23:13:29 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 23:13:29 Size of FACDT 244 23:13:29 Type of computer - Unspecified 23:13:29 System vector the SCI interrupt is wired to in 8259 mode. 9 23:13:29 System port address of the SMI Command Port 0x1048 23:13:29 The value to write to SMI_CMD to disable SMI 0x81 23:13:29 The value to write to SMI_CMD to re-enable SMI 0x80 23:13:29 The value to write to SMI_CMD to enter the S4BIOS state 0x0 23:13:29 System port address of the PM1a Event Register Block 1000 23:13:29 System port address of the PM1b Event Register Block 0 23:13:29 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 23:13:29 System port address of the PM1a Control Register Block 1004 23:13:29 System port address of the PM1b Control Register Block 0 23:13:29 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 23:13:29 System port address of the PM2 Control Register Block 1016 23:13:29 Number of bytes decoded by PM2_CNT_BLK 1 23:13:29 System port address of the Power Management Timer Control Register Block 1008 23:13:29 Number of bytes decoded by PM_TMR_BLK (=4) 4 23:13:29 System port address of General-Purpose Event 0 Register Block 1020 23:13:29 System port address of General-Purpose Event 1 Register Block 1030 23:13:29 Number of bytes decoded by GPE0_BLK 0x4 23:13:29 Number of bytes decoded by GPE1_BLK 0x4 23:13:29 Offset within the ACPI general-purpose event model where GPE1 based events start 10 23:13:29 The worst-case hardware latency to enter and exit a C2 state 90 us 23:13:29 The worst-case hardware latency to enter and exit a C3 state 900 us 23:13:29 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 23:13:29 The RTC CMOS RAM index to the day-of-month alarm value 126 23:13:29 The RTC CMOS RAM index to the month of year alarm value 127 23:13:29 IA-PC Boot Architecture Flags 0x0 23:13:29 Fixed feature flags 4A5 23:13:29 The reset register: 23:13:29 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 23:13:29 The value to write to the RESET_REG port to reset the system 0 23:13:29 ***** Throttl Width 0 Offset 1 23:13:29 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 23:13:29 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:13:29 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:13:29 ** Scan EC Status = 0 Find 0 EC 23:13:29 ** AcpiInitializeObjects mask:0 Status = 0 23:13:29 Processor [CPU0] 23:13:29 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 23:13:29 Status Evaluate Processor 0x0 AE_OK 23:13:29 Usable:1 Counter:0 23:13:29 CPU id to N:0 23:13:29 ProcId: 0x0 23:13:29 P_BLK: 0x0 23:13:29 P_BLK len: 0x0 23:13:29 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 23:13:29 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 23:13:29 Found bridge "PCI0" BBN is absent status:5 23:13:29 Finding:0 bridges 23:13:29 0:0.0 Class:600 Hdr:80 Bridge H->0 23:13:29 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 23:13:29 0:2.0 Class:601 Hdr:80 23:13:29 0:2.3 Class:C00 Hdr:0 23:13:29 0:2.5 Class:101 Hdr:0 23:13:29 0:2.7 Class:401 Hdr:0 23:13:29 0:3.0 Class:C03 Hdr:80 23:13:29 0:3.1 Class:C03 Hdr:0 23:13:29 0:3.2 Class:C03 Hdr:0 23:13:29 0:3.3 Class:C03 Hdr:0 23:13:29 0:4.0 Class:200 Hdr:0 23:13:29 0:8.0 Class:480 Hdr:0 23:13:29 0:10.0 Class:780 Hdr:0 23:13:29 1:0.0 Class:300 Hdr:0 23:13:29 PCI Bus scan: 2 PCI buses found. 23:13:29 Scan ACPI tree for PCI functions 23:13:29 0:0.0 'PCI0' (F96E5C20) 23:13:29 0:2.5 'IDEC' (F96E5CF8) 23:13:29 0:6.7 'PCI1' (F96E7630) 23:13:29 0:7.7 'PCI2' (F96E76A8) 23:13:29 0:8.7 'PCI3' (F96E7720) 23:13:29 0:10.7 'PCI4' (F96E7798) 23:13:29 0:2.0 'S962' (F96E7810) 23:13:29 0:3.0 'USB0' (F96E7E30) 23:13:29 0:3.1 'USB1' (F96E7EE0) 23:13:29 0:3.2 'USB2' (F96E7F90) 23:13:29 0:3.3 'USB3' (F96E8040) 23:13:29 0:4.0 'MAC0' (F96E80F0) 23:13:29 0:2.7 'AUD0' (F96E8140) 23:13:29 0:2.6 'AMR0' (F96E8190) 23:13:29 Bridges found: 23:13:29 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 23:13:29 0:1.0 class:604 type: 1 Bus 0->1 23:13:29 IRQLinks found: 23:13:29 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 23:13:29 A[] 23:13:29 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 23:13:29 A[] 23:13:29 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 23:13:29 A[] 23:13:29 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 23:13:29 A[] 23:13:29 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 23:13:29 A[] 23:13:29 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 23:13:29 A[] 23:13:29 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 23:13:29 A[] 23:13:29 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 23:13:29 A[] 23:13:29 PCI devices found: 23:13:29 0:0.0 1039:648 'PCI0' 23:13:29 0:1.0 1039:1 23:13:29 0:2.0 1039:8 'S962' 23:13:29 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:13:29 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:13:29 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 23:13:29 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 23:13:29 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 23:13:29 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 23:13:29 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 23:13:29 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:13:29 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:13:29 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:13:29 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:13:29 Bus detected - 1 23:13:29 ** AcpiInstall Power Device Status = 0 23:13:29 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 23:13:29 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 23:13:29 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 23:13:29 ** AcpiInstall PMTimer Device Status = 0 23:13:29 ** Total use:94208 unuse:9016 count:1573 ** 23:13:29 Event [_L13] Install GPE0x13 23:13:29 Event [_L0E] Install GPE0xE 23:13:29 Event [_L04] Install GPE0x4 23:13:29 Event [_L07] Install GPE0x7 23:13:29 Event [_L06] Install GPE0x6 23:13:29 Event [_L05] Install GPE0x5 23:13:29 Event [_L08] Install GPE0x8 23:13:29 Event [_L0F] Install GPE0xF 23:13:29 Event [_L0D] Install GPE0xD 23:13:29 Event [_L0B] Install GPE0xB 23:13:29 Event [_L0C] Install GPE0xC 23:13:29 EndScan GPE Status 0 23:13:33 APM: PSD find success. PSD Ftable:F97402BC 23:13:33 APM:Max C state 0 23:13:33 Register Notify 1st FD05929D 23:13:35 FindPCIDevice 23:13:35 Need: B:0x0 D:0x2 F:0x5 23:13:35 Finding APIC0 PIC11 Dev: [IDEC] 23:14:6 Uniaud32: PSD find success. PSD Ftable:F97402BC 23:14:6 FindPCIDevice 23:14:6 Need: B:0x0 D:0x2 F:0x0 23:14:7 APM: End scan power object 23:14:11 ===== Info ======== 23:14:11 Int Level 9 23:14:11 In Xrupt F96EFDB8 in arg F96EFDB8 23:14:11 Node 23:14:11 Name [_GPE] 23:14:11 Flags: 0x0 23:14:11 Reg count 2 23:14:11 GPE0x4 Type: Wake 23:14:11 GPE0x5 Type: Wake 23:14:11 GPE0x6 Type: Wake 23:14:11 GPE0x7 Type: Wake 23:14:11 GPE0x8 Type: Wake 23:14:11 GPE0xB Type: Wake 23:14:11 GPE0xC Type: Wake 23:14:11 GPE0xD Type: Wake 23:14:11 GPE0xE Type: Wake 23:14:11 GPE0xF Type: Wake 23:14:11 ===== Info ======== 23:14:11 Int Level 9 23:14:11 In Xrupt F96EFDB8 in arg F96EFF30 23:14:11 Node 23:14:11 Name [_GPE] 23:14:11 Flags: 0x0 23:14:11 Reg count 2 23:14:11 GPE0x3 Type: Wake 23:14:16 ** Event tread ** 23:14:16 AllocateSuspendMemory s_cpu:0 23:14:16 Alloc s_cpu OK CPU0 2304 bytes at 10 23:14:16 AllocSuspend: CPU0 CR3:1FF000 23:14:16 Status 1Mb alloc 0 10 Jul 23:14:16 acpica$ log is reading 23:14:16 APM: Setting suspend state:3 23:14:16 APM:Max C state 2 10 Jul 23:22:35 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 23:21:46 CFG: Link [LNKE] IRQ5 23:21:46 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 23:21:46 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 23:21:46 AcpiOsPredefinedOverride: "_REV" 23:21:46 AcpiOsPredefinedOverride: "_OS_" 23:21:46 AcpiOsPredefinedOverride: override to eComStation 23:21:46 AcpiOsPredefinedOverride: "_GL_" 23:21:46 AcpiOsPredefinedOverride: "_OSI" 23:21:46 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 23:21:46 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:21:46 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:21:46 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 23:21:46 ACPI: FACS @ 0x7FFF0000/0x40 23:21:46 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:21:46 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 23:21:46 Table [DSDT] 23:21:46 Table [FACS] 23:21:46 Table [FACP] 23:21:46 Table [APIC] 23:21:46 Local APIC address: FEE00000h 23:21:46 System also has 8259 23:21:46 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 23:21:46 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 23:21:46 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 23:21:46 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 23:21:46 Size of FACDT 244 23:21:46 Type of computer - Unspecified 23:21:46 System vector the SCI interrupt is wired to in 8259 mode. 9 23:21:46 System port address of the SMI Command Port 0x1048 23:21:46 The value to write to SMI_CMD to disable SMI 0x81 23:21:46 The value to write to SMI_CMD to re-enable SMI 0x80 23:21:46 The value to write to SMI_CMD to enter the S4BIOS state 0x0 23:21:46 System port address of the PM1a Event Register Block 1000 23:21:46 System port address of the PM1b Event Register Block 0 23:21:46 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 23:21:46 System port address of the PM1a Control Register Block 1004 23:21:46 System port address of the PM1b Control Register Block 0 23:21:46 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 23:21:46 System port address of the PM2 Control Register Block 1016 23:21:46 Number of bytes decoded by PM2_CNT_BLK 1 23:21:46 System port address of the Power Management Timer Control Register Block 1008 23:21:46 Number of bytes decoded by PM_TMR_BLK (=4) 4 23:21:46 System port address of General-Purpose Event 0 Register Block 1020 23:21:46 System port address of General-Purpose Event 1 Register Block 1030 23:21:46 Number of bytes decoded by GPE0_BLK 0x4 23:21:46 Number of bytes decoded by GPE1_BLK 0x4 23:21:46 Offset within the ACPI general-purpose event model where GPE1 based events start 10 23:21:46 The worst-case hardware latency to enter and exit a C2 state 90 us 23:21:46 The worst-case hardware latency to enter and exit a C3 state 900 us 23:21:46 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 23:21:46 The RTC CMOS RAM index to the day-of-month alarm value 126 23:21:46 The RTC CMOS RAM index to the month of year alarm value 127 23:21:46 IA-PC Boot Architecture Flags 0x0 23:21:46 Fixed feature flags 4A5 23:21:46 The reset register: 23:21:46 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 23:21:46 The value to write to the RESET_REG port to reset the system 0 23:21:46 ***** Throttl Width 0 Offset 1 23:21:46 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 23:21:46 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:21:46 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:21:46 ** Scan EC Status = 0 Find 0 EC 23:21:46 ** AcpiInitializeObjects mask:0 Status = 0 23:21:46 Processor [CPU0] 23:21:46 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 23:21:46 Status Evaluate Processor 0x0 AE_OK 23:21:46 Usable:1 Counter:0 23:21:46 CPU id to N:0 23:21:46 ProcId: 0x0 23:21:46 P_BLK: 0x0 23:21:46 P_BLK len: 0x0 23:21:46 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 23:21:46 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 23:21:46 Found bridge "PCI0" BBN is absent status:5 23:21:46 Finding:0 bridges 23:21:46 0:0.0 Class:600 Hdr:80 Bridge H->0 23:21:46 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 23:21:46 0:2.0 Class:601 Hdr:80 23:21:46 0:2.3 Class:C00 Hdr:0 23:21:46 0:2.5 Class:101 Hdr:0 23:21:46 0:2.7 Class:401 Hdr:0 23:21:46 0:3.0 Class:C03 Hdr:80 23:21:46 0:3.1 Class:C03 Hdr:0 23:21:46 0:3.2 Class:C03 Hdr:0 23:21:46 0:3.3 Class:C03 Hdr:0 23:21:46 0:4.0 Class:200 Hdr:0 23:21:46 0:8.0 Class:480 Hdr:0 23:21:46 0:10.0 Class:780 Hdr:0 23:21:46 1:0.0 Class:300 Hdr:0 23:21:46 PCI Bus scan: 2 PCI buses found. 23:21:46 Scan ACPI tree for PCI functions 23:21:46 0:0.0 'PCI0' (F96E5C20) 23:21:46 0:2.5 'IDEC' (F96E5CF8) 23:21:46 0:6.7 'PCI1' (F96E7630) 23:21:46 0:7.7 'PCI2' (F96E76A8) 23:21:46 0:8.7 'PCI3' (F96E7720) 23:21:46 0:10.7 'PCI4' (F96E7798) 23:21:46 0:2.0 'S962' (F96E7810) 23:21:46 0:3.0 'USB0' (F96E7E30) 23:21:46 0:3.1 'USB1' (F96E7EE0) 23:21:46 0:3.2 'USB2' (F96E7F90) 23:21:46 0:3.3 'USB3' (F96E8040) 23:21:46 0:4.0 'MAC0' (F96E80F0) 23:21:46 0:2.7 'AUD0' (F96E8140) 23:21:46 0:2.6 'AMR0' (F96E8190) 23:21:46 Bridges found: 23:21:46 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 23:21:46 0:1.0 class:604 type: 1 Bus 0->1 23:21:46 IRQLinks found: 23:21:46 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 23:21:46 A[] 23:21:46 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 23:21:46 A[] 23:21:46 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 23:21:46 A[] 23:21:46 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 23:21:46 A[] 23:21:46 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 23:21:46 A[] 23:21:46 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 23:21:46 A[] 23:21:46 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 23:21:46 A[] 23:21:46 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 23:21:46 A[] 23:21:46 PCI devices found: 23:21:46 0:0.0 1039:648 'PCI0' 23:21:46 0:1.0 1039:1 23:21:46 0:2.0 1039:8 'S962' 23:21:46 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:21:46 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:21:46 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 23:21:46 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 23:21:46 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 23:21:46 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 23:21:46 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 23:21:46 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:21:46 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:21:46 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:21:46 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:21:46 Bus detected - 1 23:21:46 ** AcpiInstall Power Device Status = 0 23:21:46 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 23:21:46 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 23:21:46 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 23:21:46 ** AcpiInstall PMTimer Device Status = 0 23:21:46 ** Total use:94208 unuse:9016 count:1573 ** 23:21:46 Event [_L13] Install GPE0x13 23:21:46 Event [_L0E] Install GPE0xE 23:21:46 Event [_L04] Install GPE0x4 23:21:46 Event [_L07] Install GPE0x7 23:21:46 Event [_L06] Install GPE0x6 23:21:46 Event [_L05] Install GPE0x5 23:21:46 Event [_L08] Install GPE0x8 23:21:46 Event [_L0F] Install GPE0xF 23:21:46 Event [_L0D] Install GPE0xD 23:21:46 Event [_L0B] Install GPE0xB 23:21:46 Event [_L0C] Install GPE0xC 23:21:46 EndScan GPE Status 0 23:21:50 APM: PSD find success. PSD Ftable:F97402BC 23:21:50 APM:Max C state 0 23:21:50 Register Notify 1st FD05929D 23:21:52 FindPCIDevice 23:21:52 Need: B:0x0 D:0x2 F:0x5 23:21:52 Finding APIC0 PIC11 Dev: [IDEC] 23:22:23 Uniaud32: PSD find success. PSD Ftable:F97402BC 23:22:23 FindPCIDevice 23:22:23 Need: B:0x0 D:0x2 F:0x0 23:22:25 APM: End scan power object 23:22:28 ===== Info ======== 23:22:28 Int Level 9 23:22:28 In Xrupt F96EFDB8 in arg F96EFDB8 23:22:28 Node 23:22:28 Name [_GPE] 23:22:28 Flags: 0x0 23:22:28 Reg count 2 23:22:28 GPE0x4 Type: Wake 23:22:28 GPE0x5 Type: Wake 23:22:28 GPE0x6 Type: Wake 23:22:28 GPE0x7 Type: Wake 23:22:28 GPE0x8 Type: Wake 23:22:28 GPE0xB Type: Wake 23:22:28 GPE0xC Type: Wake 23:22:28 GPE0xD Type: Wake 23:22:28 GPE0xE Type: Wake 23:22:28 GPE0xF Type: Wake 23:22:28 ===== Info ======== 23:22:28 Int Level 9 23:22:28 In Xrupt F96EFDB8 in arg F96EFF30 23:22:28 Node 23:22:28 Name [_GPE] 23:22:28 Flags: 0x0 23:22:28 Reg count 2 23:22:28 GPE0x3 Type: Wake 23:22:35 ** Event tread ** 23:22:35 AllocateSuspendMemory s_cpu:0 23:22:35 Alloc s_cpu OK CPU0 2304 bytes at 23 23:22:35 AllocSuspend: CPU0 CR3:1FF000 23:22:35 Status 1Mb alloc 0 10 Jul 23:22:35 acpica$ log is reading 23:22:35 APM: Setting suspend state:3 23:22:35 APM:Max C state 2 10 Jul 23:39:23 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 23:38:33 CFG: Link [LNKE] IRQ5 23:38:33 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 23:38:33 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 23:38:33 AcpiOsPredefinedOverride: "_REV" 23:38:33 AcpiOsPredefinedOverride: "_OS_" 23:38:33 AcpiOsPredefinedOverride: override to eComStation 23:38:33 AcpiOsPredefinedOverride: "_GL_" 23:38:33 AcpiOsPredefinedOverride: "_OSI" 23:38:33 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 23:38:33 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:38:33 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:38:33 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 23:38:33 ACPI: FACS @ 0x7FFF0000/0x40 23:38:33 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 23:38:33 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 23:38:33 Table [DSDT] 23:38:33 Table [FACS] 23:38:33 Table [FACP] 23:38:33 Table [APIC] 23:38:33 Local APIC address: FEE00000h 23:38:33 System also has 8259 23:38:33 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 23:38:33 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 23:38:33 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 23:38:33 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 23:38:33 Size of FACDT 244 23:38:33 Type of computer - Unspecified 23:38:33 System vector the SCI interrupt is wired to in 8259 mode. 9 23:38:33 System port address of the SMI Command Port 0x1048 23:38:33 The value to write to SMI_CMD to disable SMI 0x81 23:38:33 The value to write to SMI_CMD to re-enable SMI 0x80 23:38:33 The value to write to SMI_CMD to enter the S4BIOS state 0x0 23:38:33 System port address of the PM1a Event Register Block 1000 23:38:33 System port address of the PM1b Event Register Block 0 23:38:33 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 23:38:33 System port address of the PM1a Control Register Block 1004 23:38:33 System port address of the PM1b Control Register Block 0 23:38:33 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 23:38:33 System port address of the PM2 Control Register Block 1016 23:38:33 Number of bytes decoded by PM2_CNT_BLK 1 23:38:33 System port address of the Power Management Timer Control Register Block 1008 23:38:33 Number of bytes decoded by PM_TMR_BLK (=4) 4 23:38:33 System port address of General-Purpose Event 0 Register Block 1020 23:38:33 System port address of General-Purpose Event 1 Register Block 1030 23:38:33 Number of bytes decoded by GPE0_BLK 0x4 23:38:33 Number of bytes decoded by GPE1_BLK 0x4 23:38:33 Offset within the ACPI general-purpose event model where GPE1 based events start 10 23:38:33 The worst-case hardware latency to enter and exit a C2 state 90 us 23:38:33 The worst-case hardware latency to enter and exit a C3 state 900 us 23:38:33 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 23:38:33 The RTC CMOS RAM index to the day-of-month alarm value 126 23:38:33 The RTC CMOS RAM index to the month of year alarm value 127 23:38:33 IA-PC Boot Architecture Flags 0x0 23:38:33 Fixed feature flags 4A5 23:38:33 The reset register: 23:38:33 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 23:38:33 The value to write to the RESET_REG port to reset the system 0 23:38:33 ***** Throttl Width 0 Offset 1 23:38:33 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 23:38:33 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:38:33 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 23:38:33 ** Scan EC Status = 0 Find 0 EC 23:38:33 ** AcpiInitializeObjects mask:0 Status = 0 23:38:33 Processor [CPU0] 23:38:33 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 23:38:33 Status Evaluate Processor 0x0 AE_OK 23:38:33 Usable:1 Counter:0 23:38:33 CPU id to N:0 23:38:33 ProcId: 0x0 23:38:33 P_BLK: 0x0 23:38:33 P_BLK len: 0x0 23:38:33 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 23:38:33 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 23:38:33 Found bridge "PCI0" BBN is absent status:5 23:38:33 Finding:0 bridges 23:38:33 0:0.0 Class:600 Hdr:80 Bridge H->0 23:38:33 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 23:38:33 0:2.0 Class:601 Hdr:80 23:38:33 0:2.3 Class:C00 Hdr:0 23:38:33 0:2.5 Class:101 Hdr:0 23:38:33 0:2.7 Class:401 Hdr:0 23:38:33 0:3.0 Class:C03 Hdr:80 23:38:33 0:3.1 Class:C03 Hdr:0 23:38:33 0:3.2 Class:C03 Hdr:0 23:38:33 0:3.3 Class:C03 Hdr:0 23:38:33 0:4.0 Class:200 Hdr:0 23:38:33 0:8.0 Class:480 Hdr:0 23:38:33 0:10.0 Class:780 Hdr:0 23:38:33 1:0.0 Class:300 Hdr:0 23:38:33 PCI Bus scan: 2 PCI buses found. 23:38:33 Scan ACPI tree for PCI functions 23:38:33 0:0.0 'PCI0' (F96E5C20) 23:38:33 0:2.5 'IDEC' (F96E5CF8) 23:38:33 0:6.7 'PCI1' (F96E7630) 23:38:33 0:7.7 'PCI2' (F96E76A8) 23:38:33 0:8.7 'PCI3' (F96E7720) 23:38:33 0:10.7 'PCI4' (F96E7798) 23:38:33 0:2.0 'S962' (F96E7810) 23:38:33 0:3.0 'USB0' (F96E7E30) 23:38:33 0:3.1 'USB1' (F96E7EE0) 23:38:33 0:3.2 'USB2' (F96E7F90) 23:38:33 0:3.3 'USB3' (F96E8040) 23:38:33 0:4.0 'MAC0' (F96E80F0) 23:38:33 0:2.7 'AUD0' (F96E8140) 23:38:33 0:2.6 'AMR0' (F96E8190) 23:38:33 Bridges found: 23:38:33 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 23:38:33 0:1.0 class:604 type: 1 Bus 0->1 23:38:33 IRQLinks found: 23:38:33 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 23:38:33 A[] 23:38:33 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 23:38:33 A[] 23:38:33 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 23:38:33 A[] 23:38:33 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 23:38:33 A[] 23:38:33 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 23:38:33 A[] 23:38:33 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 23:38:33 A[] 23:38:33 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 23:38:33 A[] 23:38:33 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 23:38:33 A[] 23:38:33 PCI devices found: 23:38:33 0:0.0 1039:648 'PCI0' 23:38:33 0:1.0 1039:1 23:38:33 0:2.0 1039:8 'S962' 23:38:33 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:38:33 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:38:33 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 23:38:33 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 23:38:33 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 23:38:33 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 23:38:33 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 23:38:33 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:38:33 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 23:38:33 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 23:38:33 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 23:38:33 Bus detected - 1 23:38:33 ** AcpiInstall Power Device Status = 0 23:38:33 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 23:38:33 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 23:38:33 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 23:38:33 ** AcpiInstall PMTimer Device Status = 0 23:38:33 ** Total use:94208 unuse:9016 count:1573 ** 23:38:33 Event [_L13] Install GPE0x13 23:38:33 Event [_L0E] Install GPE0xE 23:38:33 Event [_L04] Install GPE0x4 23:38:33 Event [_L07] Install GPE0x7 23:38:33 Event [_L06] Install GPE0x6 23:38:33 Event [_L05] Install GPE0x5 23:38:33 Event [_L08] Install GPE0x8 23:38:33 Event [_L0F] Install GPE0xF 23:38:33 Event [_L0D] Install GPE0xD 23:38:33 Event [_L0B] Install GPE0xB 23:38:33 Event [_L0C] Install GPE0xC 23:38:33 EndScan GPE Status 0 23:38:37 APM: PSD find success. PSD Ftable:F97402BC 23:38:37 APM:Max C state 0 23:38:37 Register Notify 1st FD05929D 23:38:40 FindPCIDevice 23:38:40 Need: B:0x0 D:0x2 F:0x5 23:38:40 Finding APIC0 PIC11 Dev: [IDEC] 23:39:11 Uniaud32: PSD find success. PSD Ftable:F97402BC 23:39:11 FindPCIDevice 23:39:11 Need: B:0x0 D:0x2 F:0x0 23:39:13 APM: End scan power object 23:39:16 ===== Info ======== 23:39:16 Int Level 9 23:39:16 In Xrupt F96EFDB8 in arg F96EFDB8 23:39:16 Node 23:39:16 Name [_GPE] 23:39:16 Flags: 0x0 23:39:16 Reg count 2 23:39:16 GPE0x4 Type: Wake 23:39:16 GPE0x5 Type: Wake 23:39:16 GPE0x6 Type: Wake 23:39:16 GPE0x7 Type: Wake 23:39:16 GPE0x8 Type: Wake 23:39:16 GPE0xB Type: Wake 23:39:16 GPE0xC Type: Wake 23:39:16 GPE0xD Type: Wake 23:39:16 GPE0xE Type: Wake 23:39:16 GPE0xF Type: Wake 23:39:16 ===== Info ======== 23:39:16 Int Level 9 23:39:16 In Xrupt F96EFDB8 in arg F96EFF30 23:39:16 Node 23:39:16 Name [_GPE] 23:39:16 Flags: 0x0 23:39:16 Reg count 2 23:39:16 GPE0x3 Type: Wake 23:39:23 ** Event tread ** 23:39:23 AllocateSuspendMemory s_cpu:0 23:39:23 Alloc s_cpu OK CPU0 2304 bytes at 17 23:39:23 AllocSuspend: CPU0 CR3:1FF000 23:39:23 Status 1Mb alloc 0 10 Jul 23:39:23 acpica$ log is reading 23:39:23 APM: Setting suspend state:3 23:39:23 APM:Max C state 2 11 Jul 14:33:31 AcpiDaemon LID thread is starting ID 0x4 on 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 14:32:42 CFG: Link [LNKE] IRQ5 14:32:42 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 14:32:42 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 14:32:42 AcpiOsPredefinedOverride: "_REV" 14:32:42 AcpiOsPredefinedOverride: "_OS_" 14:32:42 AcpiOsPredefinedOverride: override to eComStation 14:32:42 AcpiOsPredefinedOverride: "_GL_" 14:32:42 AcpiOsPredefinedOverride: "_OSI" 14:32:42 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 14:32:42 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 14:32:42 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 14:32:42 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 14:32:42 ACPI: FACS @ 0x7FFF0000/0x40 14:32:42 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 14:32:42 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 14:32:42 Table [DSDT] 14:32:42 Table [FACS] 14:32:42 Table [FACP] 14:32:42 Table [APIC] 14:32:42 Local APIC address: FEE00000h 14:32:42 System also has 8259 14:32:42 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 14:32:42 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 14:32:42 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 14:32:42 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 14:32:42 Size of FACDT 244 14:32:42 Type of computer - Unspecified 14:32:42 System vector the SCI interrupt is wired to in 8259 mode. 9 14:32:42 System port address of the SMI Command Port 0x1048 14:32:42 The value to write to SMI_CMD to disable SMI 0x81 14:32:42 The value to write to SMI_CMD to re-enable SMI 0x80 14:32:42 The value to write to SMI_CMD to enter the S4BIOS state 0x0 14:32:42 System port address of the PM1a Event Register Block 1000 14:32:42 System port address of the PM1b Event Register Block 0 14:32:42 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 14:32:42 System port address of the PM1a Control Register Block 1004 14:32:42 System port address of the PM1b Control Register Block 0 14:32:42 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 14:32:42 System port address of the PM2 Control Register Block 1016 14:32:42 Number of bytes decoded by PM2_CNT_BLK 1 14:32:42 System port address of the Power Management Timer Control Register Block 1008 14:32:42 Number of bytes decoded by PM_TMR_BLK (=4) 4 14:32:42 System port address of General-Purpose Event 0 Register Block 1020 14:32:42 System port address of General-Purpose Event 1 Register Block 1030 14:32:42 Number of bytes decoded by GPE0_BLK 0x4 14:32:42 Number of bytes decoded by GPE1_BLK 0x4 14:32:42 Offset within the ACPI general-purpose event model where GPE1 based events start 10 14:32:42 The worst-case hardware latency to enter and exit a C2 state 90 us 14:32:42 The worst-case hardware latency to enter and exit a C3 state 900 us 14:32:42 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 14:32:42 The RTC CMOS RAM index to the day-of-month alarm value 126 14:32:42 The RTC CMOS RAM index to the month of year alarm value 127 14:32:42 IA-PC Boot Architecture Flags 0x0 14:32:42 Fixed feature flags 4A5 14:32:42 The reset register: 14:32:42 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 14:32:42 The value to write to the RESET_REG port to reset the system 0 14:32:42 ***** Throttl Width 0 Offset 1 14:32:42 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 14:32:42 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 14:32:42 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 14:32:42 ** Scan EC Status = 0 Find 0 EC 14:32:42 ** AcpiInitializeObjects mask:0 Status = 0 14:32:42 Processor [CPU0] 14:32:42 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 14:32:42 Status Evaluate Processor 0x0 AE_OK 14:32:42 Usable:1 Counter:0 14:32:42 CPU id to N:0 14:32:42 ProcId: 0x0 14:32:42 P_BLK: 0x0 14:32:42 P_BLK len: 0x0 14:32:42 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 14:32:42 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 14:32:42 Found bridge "PCI0" BBN is absent status:5 14:32:42 Finding:0 bridges 14:32:42 0:0.0 Class:600 Hdr:80 Bridge H->0 14:32:42 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 14:32:42 0:2.0 Class:601 Hdr:80 14:32:42 0:2.3 Class:C00 Hdr:0 14:32:42 0:2.5 Class:101 Hdr:0 14:32:42 0:2.7 Class:401 Hdr:0 14:32:42 0:3.0 Class:C03 Hdr:80 14:32:42 0:3.1 Class:C03 Hdr:0 14:32:42 0:3.2 Class:C03 Hdr:0 14:32:42 0:3.3 Class:C03 Hdr:0 14:32:42 0:4.0 Class:200 Hdr:0 14:32:42 0:8.0 Class:480 Hdr:0 14:32:42 0:10.0 Class:780 Hdr:0 14:32:42 1:0.0 Class:300 Hdr:0 14:32:42 PCI Bus scan: 2 PCI buses found. 14:32:42 Scan ACPI tree for PCI functions 14:32:42 0:0.0 'PCI0' (F96E5C20) 14:32:42 0:2.5 'IDEC' (F96E5CF8) 14:32:42 0:6.7 'PCI1' (F96E7630) 14:32:42 0:7.7 'PCI2' (F96E76A8) 14:32:42 0:8.7 'PCI3' (F96E7720) 14:32:42 0:10.7 'PCI4' (F96E7798) 14:32:42 0:2.0 'S962' (F96E7810) 14:32:42 0:3.0 'USB0' (F96E7E30) 14:32:42 0:3.1 'USB1' (F96E7EE0) 14:32:42 0:3.2 'USB2' (F96E7F90) 14:32:42 0:3.3 'USB3' (F96E8040) 14:32:42 0:4.0 'MAC0' (F96E80F0) 14:32:42 0:2.7 'AUD0' (F96E8140) 14:32:42 0:2.6 'AMR0' (F96E8190) 14:32:42 Bridges found: 14:32:42 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 14:32:42 0:1.0 class:604 type: 1 Bus 0->1 14:32:42 IRQLinks found: 14:32:42 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 14:32:42 A[] 14:32:42 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 14:32:42 A[] 14:32:42 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 14:32:42 A[] 14:32:42 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 14:32:42 A[] 14:32:42 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 14:32:42 A[] 14:32:42 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 14:32:42 A[] 14:32:42 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 14:32:42 A[] 14:32:42 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 14:32:42 A[] 14:32:42 PCI devices found: 14:32:42 0:0.0 1039:648 'PCI0' 14:32:42 0:1.0 1039:1 14:32:42 0:2.0 1039:8 'S962' 14:32:42 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 14:32:42 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 14:32:42 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 14:32:42 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 14:32:42 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 14:32:42 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 14:32:42 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 14:32:42 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 14:32:42 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 14:32:42 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 14:32:42 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 14:32:42 Bus detected - 1 14:32:42 ** AcpiInstall Power Device Status = 0 14:32:42 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 14:32:42 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 14:32:42 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 14:32:42 ** AcpiInstall PMTimer Device Status = 0 14:32:42 ** Total use:94208 unuse:9016 count:1573 ** 14:32:42 Event [_L13] Install GPE0x13 14:32:42 Event [_L0E] Install GPE0xE 14:32:42 Event [_L04] Install GPE0x4 14:32:42 Event [_L07] Install GPE0x7 14:32:42 Event [_L06] Install GPE0x6 14:32:42 Event [_L05] Install GPE0x5 14:32:42 Event [_L08] Install GPE0x8 14:32:42 Event [_L0F] Install GPE0xF 14:32:42 Event [_L0D] Install GPE0xD 14:32:42 Event [_L0B] Install GPE0xB 14:32:42 Event [_L0C] Install GPE0xC 14:32:42 EndScan GPE Status 0 14:32:46 APM: PSD find success. PSD Ftable:F97402BC 14:32:46 APM:Max C state 0 14:32:46 Register Notify 1st FD05929D 14:32:49 FindPCIDevice 14:32:49 Need: B:0x0 D:0x2 F:0x5 14:32:49 Finding APIC0 PIC11 Dev: [IDEC] 14:33:20 Uniaud32: PSD find success. PSD Ftable:F97402BC 14:33:20 FindPCIDevice 14:33:20 Need: B:0x0 D:0x2 F:0x0 14:33:22 APM: End scan power object 14:33:25 ===== Info ======== 14:33:25 Int Level 9 14:33:25 In Xrupt F96EFDB8 in arg F96EFDB8 14:33:25 Node 14:33:25 Name [_GPE] 14:33:25 Flags: 0x0 14:33:25 Reg count 2 14:33:25 GPE0x4 Type: Wake 14:33:25 GPE0x5 Type: Wake 14:33:25 GPE0x6 Type: Wake 14:33:25 GPE0x7 Type: Wake 14:33:25 GPE0x8 Type: Wake 14:33:25 GPE0xB Type: Wake 14:33:25 GPE0xC Type: Wake 14:33:25 GPE0xD Type: Wake 14:33:25 GPE0xE Type: Wake 14:33:25 GPE0xF Type: Wake 14:33:25 ===== Info ======== 14:33:25 Int Level 9 14:33:25 In Xrupt F96EFDB8 in arg F96EFF30 14:33:25 Node 14:33:25 Name [_GPE] 14:33:25 Flags: 0x0 14:33:25 Reg count 2 14:33:25 GPE0x3 Type: Wake 14:33:31 ** Event tread ** 14:33:31 AllocateSuspendMemory s_cpu:0 14:33:31 Alloc s_cpu OK CPU0 2304 bytes at 1F 14:33:31 AllocSuspend: CPU0 CR3:1FF000 14:33:31 Status 1Mb alloc 0 11 Jul 14:33:31 acpica$ log is reading 14:33:31 APM: Setting suspend state:3 14:33:31 APM:Max C state 2 11 Jul 18:06:57 AcpiDaemon LID device not finding, finish thread 00 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 18:6:8 CFG: Link [LNKE] IRQ5 18:6:8 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 18:6:8 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 18:6:8 AcpiOsPredefinedOverride: "_REV" 18:6:8 AcpiOsPredefinedOverride: "_OS_" 18:6:8 AcpiOsPredefinedOverride: override to eComStation 18:6:8 AcpiOsPredefinedOverride: "_GL_" 18:6:8 AcpiOsPredefinedOverride: "_OSI" 18:6:8 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 18:6:8 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 18:6:8 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 18:6:8 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 18:6:8 ACPI: FACS @ 0x7FFF0000/0x40 18:6:8 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 18:6:8 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 18:6:8 Table [DSDT] 18:6:8 Table [FACS] 18:6:8 Table [FACP] 18:6:8 Table [APIC] 18:6:8 Local APIC address: FEE00000h 18:6:8 System also has 8259 18:6:8 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 18:6:8 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 18:6:8 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 18:6:8 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 18:6:8 Size of FACDT 244 18:6:8 Type of computer - Unspecified 18:6:8 System vector the SCI interrupt is wired to in 8259 mode. 9 18:6:8 System port address of the SMI Command Port 0x1048 18:6:8 The value to write to SMI_CMD to disable SMI 0x81 18:6:8 The value to write to SMI_CMD to re-enable SMI 0x80 18:6:8 The value to write to SMI_CMD to enter the S4BIOS state 0x0 18:6:8 System port address of the PM1a Event Register Block 1000 18:6:8 System port address of the PM1b Event Register Block 0 18:6:8 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 18:6:8 System port address of the PM1a Control Register Block 1004 18:6:8 System port address of the PM1b Control Register Block 0 18:6:8 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 18:6:8 System port address of the PM2 Control Register Block 1016 18:6:8 Number of bytes decoded by PM2_CNT_BLK 1 18:6:8 System port address of the Power Management Timer Control Register Block 1008 18:6:8 Number of bytes decoded by PM_TMR_BLK (=4) 4 18:6:8 System port address of General-Purpose Event 0 Register Block 1020 18:6:8 System port address of General-Purpose Event 1 Register Block 1030 18:6:8 Number of bytes decoded by GPE0_BLK 0x4 18:6:8 Number of bytes decoded by GPE1_BLK 0x4 18:6:8 Offset within the ACPI general-purpose event model where GPE1 based events start 10 18:6:8 The worst-case hardware latency to enter and exit a C2 state 90 us 18:6:8 The worst-case hardware latency to enter and exit a C3 state 900 us 18:6:8 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 18:6:8 The RTC CMOS RAM index to the day-of-month alarm value 126 18:6:8 The RTC CMOS RAM index to the month of year alarm value 127 18:6:8 IA-PC Boot Architecture Flags 0x0 18:6:8 Fixed feature flags 4A5 18:6:8 The reset register: 18:6:8 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 18:6:8 The value to write to the RESET_REG port to reset the system 0 18:6:8 ***** Throttl Width 0 Offset 1 18:6:8 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 18:6:8 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 18:6:8 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 18:6:8 ** Scan EC Status = 0 Find 0 EC 18:6:8 ** AcpiInitializeObjects mask:0 Status = 0 18:6:8 Processor [CPU0] 18:6:8 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 18:6:8 Status Evaluate Processor 0x0 AE_OK 18:6:8 Usable:1 Counter:0 18:6:8 CPU id to N:0 18:6:8 ProcId: 0x0 18:6:8 P_BLK: 0x0 18:6:8 P_BLK len: 0x0 18:6:8 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 18:6:8 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 18:6:8 Found bridge "PCI0" BBN is absent status:5 18:6:8 Finding:0 bridges 18:6:8 0:0.0 Class:600 Hdr:80 Bridge H->0 18:6:8 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 18:6:8 0:2.0 Class:601 Hdr:80 18:6:8 0:2.3 Class:C00 Hdr:0 18:6:8 0:2.5 Class:101 Hdr:0 18:6:8 0:2.7 Class:401 Hdr:0 18:6:8 0:3.0 Class:C03 Hdr:80 18:6:8 0:3.1 Class:C03 Hdr:0 18:6:8 0:3.2 Class:C03 Hdr:0 18:6:8 0:3.3 Class:C03 Hdr:0 18:6:8 0:4.0 Class:200 Hdr:0 18:6:8 0:8.0 Class:480 Hdr:0 18:6:8 0:10.0 Class:780 Hdr:0 18:6:8 1:0.0 Class:300 Hdr:0 18:6:8 PCI Bus scan: 2 PCI buses found. 18:6:8 Scan ACPI tree for PCI functions 18:6:8 0:0.0 'PCI0' (F96E5C20) 18:6:8 0:2.5 'IDEC' (F96E5CF8) 18:6:8 0:6.7 'PCI1' (F96E7630) 18:6:8 0:7.7 'PCI2' (F96E76A8) 18:6:8 0:8.7 'PCI3' (F96E7720) 18:6:8 0:10.7 'PCI4' (F96E7798) 18:6:8 0:2.0 'S962' (F96E7810) 18:6:8 0:3.0 'USB0' (F96E7E30) 18:6:8 0:3.1 'USB1' (F96E7EE0) 18:6:8 0:3.2 'USB2' (F96E7F90) 18:6:8 0:3.3 'USB3' (F96E8040) 18:6:8 0:4.0 'MAC0' (F96E80F0) 18:6:8 0:2.7 'AUD0' (F96E8140) 18:6:8 0:2.6 'AMR0' (F96E8190) 18:6:8 Bridges found: 18:6:8 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 18:6:8 0:1.0 class:604 type: 1 Bus 0->1 18:6:8 IRQLinks found: 18:6:8 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 18:6:8 A[] 18:6:8 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 18:6:8 A[] 18:6:8 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 18:6:8 A[] 18:6:8 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 18:6:8 A[] 18:6:8 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 18:6:8 A[] 18:6:8 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 18:6:8 A[] 18:6:8 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 18:6:8 A[] 18:6:8 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 18:6:8 A[] 18:6:8 PCI devices found: 18:6:8 0:0.0 1039:648 'PCI0' 18:6:8 0:1.0 1039:1 18:6:8 0:2.0 1039:8 'S962' 18:6:8 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 18:6:8 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 18:6:8 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 18:6:8 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 18:6:8 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 18:6:8 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 18:6:8 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 18:6:8 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 18:6:8 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 18:6:8 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 18:6:8 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 18:6:8 Bus detected - 1 18:6:8 ** AcpiInstall Power Device Status = 0 18:6:8 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 18:6:8 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 18:6:8 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 18:6:8 ** AcpiInstall PMTimer Device Status = 0 18:6:8 ** Total use:94208 unuse:9016 count:1573 ** 18:6:8 Event [_L13] Install GPE0x13 18:6:8 Event [_L0E] Install GPE0xE 18:6:8 Event [_L04] Install GPE0x4 18:6:8 Event [_L07] Install GPE0x7 18:6:8 Event [_L06] Install GPE0x6 18:6:8 Event [_L05] Install GPE0x5 18:6:8 Event [_L08] Install GPE0x8 18:6:8 Event [_L0F] Install GPE0xF 18:6:8 Event [_L0D] Install GPE0xD 18:6:8 Event [_L0B] Install GPE0xB 18:6:8 Event [_L0C] Install GPE0xC 18:6:8 EndScan GPE Status 0 18:6:12 APM: PSD find success. PSD Ftable:F97402BC 18:6:12 APM:Max C state 0 18:6:12 Register Notify 1st FD05929D 18:6:14 FindPCIDevice 18:6:14 Need: B:0x0 D:0x2 F:0x5 18:6:14 Finding APIC0 PIC11 Dev: [IDEC] 18:6:45 Uniaud32: PSD find success. PSD Ftable:F97402BC 18:6:45 FindPCIDevice 18:6:45 Need: B:0x0 D:0x2 F:0x0 18:6:47 APM: End scan power object 18:6:50 ===== Info ======== 18:6:50 Int Level 9 18:6:50 In Xrupt F96EFDB8 in arg F96EFDB8 18:6:50 Node 18:6:50 Name [_GPE] 18:6:50 Flags: 0x0 18:6:50 Reg count 2 18:6:50 GPE0x4 Type: Wake 18:6:50 GPE0x5 Type: Wake 18:6:50 GPE0x6 Type: Wake 18:6:50 GPE0x7 Type: Wake 18:6:50 GPE0x8 Type: Wake 18:6:50 GPE0xB Type: Wake 18:6:50 GPE0xC Type: Wake 18:6:50 GPE0xD Type: Wake 18:6:50 GPE0xE Type: Wake 18:6:50 GPE0xF Type: Wake 18:6:50 ===== Info ======== 18:6:50 Int Level 9 18:6:50 In Xrupt F96EFDB8 in arg F96EFF30 18:6:50 Node 18:6:50 Name [_GPE] 18:6:50 Flags: 0x0 18:6:50 Reg count 2 18:6:50 GPE0x3 Type: Wake 18:6:57 ** Event tread ** 18:6:57 AllocateSuspendMemory s_cpu:0 18:6:57 Alloc s_cpu OK CPU0 2304 bytes at 39 18:6:57 AllocSuspend: CPU0 CR3:1FF000 18:6:57 Status 1Mb alloc 0 11 Jul 18:06:57 acpica$ log is reading 18:6:57 APM: Setting suspend state:3 18:6:57 APM:Max C state 2 12 Jul 13:08:18 AcpiDaemon LID thread is starting ID 0x4 on 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 13:7:31 CFG: Link [LNKE] IRQ5 13:7:31 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 13:7:31 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 13:7:31 AcpiOsPredefinedOverride: "_REV" 13:7:31 AcpiOsPredefinedOverride: "_OS_" 13:7:31 AcpiOsPredefinedOverride: override to eComStation 13:7:31 AcpiOsPredefinedOverride: "_GL_" 13:7:31 AcpiOsPredefinedOverride: "_OSI" 13:7:31 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 13:7:31 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 13:7:31 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 13:7:31 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 13:7:31 ACPI: FACS @ 0x7FFF0000/0x40 13:7:31 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 13:7:31 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 13:7:31 Table [DSDT] 13:7:31 Table [FACS] 13:7:31 Table [FACP] 13:7:31 Table [APIC] 13:7:31 Local APIC address: FEE00000h 13:7:31 System also has 8259 13:7:31 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 13:7:31 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 13:7:31 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 13:7:31 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 13:7:31 Size of FACDT 244 13:7:31 Type of computer - Unspecified 13:7:31 System vector the SCI interrupt is wired to in 8259 mode. 9 13:7:31 System port address of the SMI Command Port 0x1048 13:7:31 The value to write to SMI_CMD to disable SMI 0x81 13:7:31 The value to write to SMI_CMD to re-enable SMI 0x80 13:7:31 The value to write to SMI_CMD to enter the S4BIOS state 0x0 13:7:31 System port address of the PM1a Event Register Block 1000 13:7:31 System port address of the PM1b Event Register Block 0 13:7:31 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 13:7:31 System port address of the PM1a Control Register Block 1004 13:7:31 System port address of the PM1b Control Register Block 0 13:7:31 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 13:7:31 System port address of the PM2 Control Register Block 1016 13:7:31 Number of bytes decoded by PM2_CNT_BLK 1 13:7:31 System port address of the Power Management Timer Control Register Block 1008 13:7:31 Number of bytes decoded by PM_TMR_BLK (=4) 4 13:7:31 System port address of General-Purpose Event 0 Register Block 1020 13:7:31 System port address of General-Purpose Event 1 Register Block 1030 13:7:31 Number of bytes decoded by GPE0_BLK 0x4 13:7:31 Number of bytes decoded by GPE1_BLK 0x4 13:7:31 Offset within the ACPI general-purpose event model where GPE1 based events start 10 13:7:31 The worst-case hardware latency to enter and exit a C2 state 90 us 13:7:31 The worst-case hardware latency to enter and exit a C3 state 900 us 13:7:31 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 13:7:31 The RTC CMOS RAM index to the day-of-month alarm value 126 13:7:31 The RTC CMOS RAM index to the month of year alarm value 127 13:7:31 IA-PC Boot Architecture Flags 0x0 13:7:31 Fixed feature flags 4A5 13:7:31 The reset register: 13:7:31 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 13:7:31 The value to write to the RESET_REG port to reset the system 0 13:7:31 ***** Throttl Width 0 Offset 1 13:7:31 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 13:7:31 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 13:7:31 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 13:7:31 ** Scan EC Status = 0 Find 0 EC 13:7:31 ** AcpiInitializeObjects mask:0 Status = 0 13:7:31 Processor [CPU0] 13:7:31 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 13:7:31 Status Evaluate Processor 0x0 AE_OK 13:7:31 Usable:1 Counter:0 13:7:31 CPU id to N:0 13:7:31 ProcId: 0x0 13:7:31 P_BLK: 0x0 13:7:31 P_BLK len: 0x0 13:7:31 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 13:7:31 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 13:7:31 Found bridge "PCI0" BBN is absent status:5 13:7:31 Finding:0 bridges 13:7:31 0:0.0 Class:600 Hdr:80 Bridge H->0 13:7:31 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 13:7:31 0:2.0 Class:601 Hdr:80 13:7:31 0:2.3 Class:C00 Hdr:0 13:7:31 0:2.5 Class:101 Hdr:0 13:7:31 0:2.7 Class:401 Hdr:0 13:7:31 0:3.0 Class:C03 Hdr:80 13:7:31 0:3.1 Class:C03 Hdr:0 13:7:31 0:3.2 Class:C03 Hdr:0 13:7:31 0:3.3 Class:C03 Hdr:0 13:7:31 0:4.0 Class:200 Hdr:0 13:7:31 0:8.0 Class:480 Hdr:0 13:7:31 0:10.0 Class:780 Hdr:0 13:7:31 1:0.0 Class:300 Hdr:0 13:7:31 PCI Bus scan: 2 PCI buses found. 13:7:31 Scan ACPI tree for PCI functions 13:7:31 0:0.0 'PCI0' (F96E5C20) 13:7:31 0:2.5 'IDEC' (F96E5CF8) 13:7:31 0:6.7 'PCI1' (F96E7630) 13:7:31 0:7.7 'PCI2' (F96E76A8) 13:7:31 0:8.7 'PCI3' (F96E7720) 13:7:31 0:10.7 'PCI4' (F96E7798) 13:7:31 0:2.0 'S962' (F96E7810) 13:7:31 0:3.0 'USB0' (F96E7E30) 13:7:31 0:3.1 'USB1' (F96E7EE0) 13:7:31 0:3.2 'USB2' (F96E7F90) 13:7:31 0:3.3 'USB3' (F96E8040) 13:7:31 0:4.0 'MAC0' (F96E80F0) 13:7:31 0:2.7 'AUD0' (F96E8140) 13:7:31 0:2.6 'AMR0' (F96E8190) 13:7:31 Bridges found: 13:7:31 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 13:7:31 0:1.0 class:604 type: 1 Bus 0->1 13:7:31 IRQLinks found: 13:7:31 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 13:7:31 A[] 13:7:31 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 13:7:31 A[] 13:7:31 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 13:7:31 A[] 13:7:31 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 13:7:31 A[] 13:7:31 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 13:7:31 A[] 13:7:31 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 13:7:31 A[] 13:7:31 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 13:7:31 A[] 13:7:31 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 13:7:31 A[] 13:7:31 PCI devices found: 13:7:31 0:0.0 1039:648 'PCI0' 13:7:31 0:1.0 1039:1 13:7:31 0:2.0 1039:8 'S962' 13:7:31 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 13:7:31 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 13:7:31 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 13:7:31 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 13:7:31 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 13:7:31 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 13:7:31 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 13:7:31 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 13:7:31 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 13:7:31 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 13:7:31 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 13:7:31 Bus detected - 1 13:7:31 ** AcpiInstall Power Device Status = 0 13:7:31 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 13:7:31 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 13:7:31 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 13:7:31 ** AcpiInstall PMTimer Device Status = 0 13:7:31 ** Total use:94208 unuse:9016 count:1573 ** 13:7:31 Event [_L13] Install GPE0x13 13:7:31 Event [_L0E] Install GPE0xE 13:7:31 Event [_L04] Install GPE0x4 13:7:31 Event [_L07] Install GPE0x7 13:7:31 Event [_L06] Install GPE0x6 13:7:31 Event [_L05] Install GPE0x5 13:7:31 Event [_L08] Install GPE0x8 13:7:31 Event [_L0F] Install GPE0xF 13:7:31 Event [_L0D] Install GPE0xD 13:7:31 Event [_L0B] Install GPE0xB 13:7:31 Event [_L0C] Install GPE0xC 13:7:31 EndScan GPE Status 0 13:7:35 APM: PSD find success. PSD Ftable:F97402BC 13:7:35 APM:Max C state 0 13:7:35 Register Notify 1st FD05929D 13:7:37 FindPCIDevice 13:7:37 Need: B:0x0 D:0x2 F:0x5 13:7:37 Finding APIC0 PIC11 Dev: [IDEC] 13:8:8 Uniaud32: PSD find success. PSD Ftable:F97402BC 13:8:8 FindPCIDevice 13:8:8 Need: B:0x0 D:0x2 F:0x0 13:8:10 APM: End scan power object 13:8:13 ===== Info ======== 13:8:13 Int Level 9 13:8:13 In Xrupt F96EFDB8 in arg F96EFDB8 13:8:13 Node 13:8:13 Name [_GPE] 13:8:13 Flags: 0x0 13:8:13 Reg count 2 13:8:13 GPE0x4 Type: Wake 13:8:13 GPE0x5 Type: Wake 13:8:13 GPE0x6 Type: Wake 13:8:13 GPE0x7 Type: Wake 13:8:13 GPE0x8 Type: Wake 13:8:13 GPE0xB Type: Wake 13:8:13 GPE0xC Type: Wake 13:8:13 GPE0xD Type: Wake 13:8:13 GPE0xE Type: Wake 13:8:13 GPE0xF Type: Wake 13:8:13 ===== Info ======== 13:8:13 Int Level 9 13:8:13 In Xrupt F96EFDB8 in arg F96EFF30 13:8:13 Node 13:8:13 Name [_GPE] 13:8:13 Flags: 0x0 13:8:13 Reg count 2 13:8:13 GPE0x3 Type: Wake 13:8:18 ** Event tread ** 13:8:18 AllocateSuspendMemory s_cpu:0 13:8:18 Alloc s_cpu OK CPU0 2304 bytes at 12 13:8:18 AllocSuspend: CPU0 CR3:1FF000 13:8:18 Status 1Mb alloc 0 12 Jul 13:08:18 acpica$ log is reading 13:8:18 APM: Setting suspend state:3 13:8:18 APM:Max C state 2 21 Jul 16:23:46 AcpiDaemon LID thread is starting ID 0x4 on 0x10000 --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 16:22:59 CFG: Link [LNKE] IRQ5 16:22:59 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 16:22:59 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 16:22:59 AcpiOsPredefinedOverride: "_REV" 16:22:59 AcpiOsPredefinedOverride: "_OS_" 16:22:59 AcpiOsPredefinedOverride: override to eComStation 16:22:59 AcpiOsPredefinedOverride: "_GL_" 16:22:59 AcpiOsPredefinedOverride: "_OSI" 16:22:59 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 16:22:59 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:22:59 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:22:59 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 16:22:59 ACPI: FACS @ 0x7FFF0000/0x40 16:22:59 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:22:59 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 16:22:59 Table [DSDT] 16:22:59 Table [FACS] 16:22:59 Table [FACP] 16:22:59 Table [APIC] 16:22:59 Local APIC address: FEE00000h 16:22:59 System also has 8259 16:22:59 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 16:22:59 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 16:22:59 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 16:22:59 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 16:22:59 Size of FACDT 244 16:22:59 Type of computer - Unspecified 16:22:59 System vector the SCI interrupt is wired to in 8259 mode. 9 16:22:59 System port address of the SMI Command Port 0x1048 16:22:59 The value to write to SMI_CMD to disable SMI 0x81 16:22:59 The value to write to SMI_CMD to re-enable SMI 0x80 16:22:59 The value to write to SMI_CMD to enter the S4BIOS state 0x0 16:22:59 System port address of the PM1a Event Register Block 1000 16:22:59 System port address of the PM1b Event Register Block 0 16:22:59 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 16:22:59 System port address of the PM1a Control Register Block 1004 16:22:59 System port address of the PM1b Control Register Block 0 16:22:59 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 16:22:59 System port address of the PM2 Control Register Block 1016 16:22:59 Number of bytes decoded by PM2_CNT_BLK 1 16:22:59 System port address of the Power Management Timer Control Register Block 1008 16:22:59 Number of bytes decoded by PM_TMR_BLK (=4) 4 16:22:59 System port address of General-Purpose Event 0 Register Block 1020 16:22:59 System port address of General-Purpose Event 1 Register Block 1030 16:22:59 Number of bytes decoded by GPE0_BLK 0x4 16:22:59 Number of bytes decoded by GPE1_BLK 0x4 16:22:59 Offset within the ACPI general-purpose event model where GPE1 based events start 10 16:22:59 The worst-case hardware latency to enter and exit a C2 state 90 us 16:22:59 The worst-case hardware latency to enter and exit a C3 state 900 us 16:22:59 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 16:22:59 The RTC CMOS RAM index to the day-of-month alarm value 126 16:22:59 The RTC CMOS RAM index to the month of year alarm value 127 16:22:59 IA-PC Boot Architecture Flags 0x0 16:22:59 Fixed feature flags 4A5 16:22:59 The reset register: 16:22:59 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 16:22:59 The value to write to the RESET_REG port to reset the system 0 16:22:59 ***** Throttl Width 0 Offset 1 16:22:59 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 16:22:59 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:22:59 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:22:59 ** Scan EC Status = 0 Find 0 EC 16:22:59 ** AcpiInitializeObjects mask:0 Status = 0 16:22:59 Processor [CPU0] 16:22:59 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 16:22:59 Status Evaluate Processor 0x0 AE_OK 16:22:59 Usable:1 Counter:0 16:22:59 CPU id to N:0 16:22:59 ProcId: 0x0 16:22:59 P_BLK: 0x0 16:22:59 P_BLK len: 0x0 16:22:59 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 16:22:59 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 16:22:59 Found bridge "PCI0" BBN is absent status:5 16:22:59 Finding:0 bridges 16:22:59 0:0.0 Class:600 Hdr:80 Bridge H->0 16:22:59 0:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge 16:22:59 0:2.0 Class:601 Hdr:80 16:22:59 0:2.3 Class:C00 Hdr:0 16:22:59 0:2.5 Class:101 Hdr:0 16:22:59 0:2.7 Class:401 Hdr:0 16:22:59 0:3.0 Class:C03 Hdr:80 16:22:59 0:3.1 Class:C03 Hdr:0 16:22:59 0:3.2 Class:C03 Hdr:0 16:22:59 0:3.3 Class:C03 Hdr:0 16:22:59 0:4.0 Class:200 Hdr:0 16:22:59 0:8.0 Class:480 Hdr:0 16:22:59 0:10.0 Class:780 Hdr:0 16:22:59 1:0.0 Class:300 Hdr:0 16:22:59 PCI Bus scan: 2 PCI buses found. 16:22:59 Scan ACPI tree for PCI functions 16:22:59 0:0.0 'PCI0' (F96E5C20) 16:22:59 0:2.5 'IDEC' (F96E5CF8) 16:22:59 0:6.7 'PCI1' (F96E7630) 16:22:59 0:7.7 'PCI2' (F96E76A8) 16:22:59 0:8.7 'PCI3' (F96E7720) 16:22:59 0:10.7 'PCI4' (F96E7798) 16:22:59 0:2.0 'S962' (F96E7810) 16:22:59 0:3.0 'USB0' (F96E7E30) 16:22:59 0:3.1 'USB1' (F96E7EE0) 16:22:59 0:3.2 'USB2' (F96E7F90) 16:22:59 0:3.3 'USB3' (F96E8040) 16:22:59 0:4.0 'MAC0' (F96E80F0) 16:22:59 0:2.7 'AUD0' (F96E8140) 16:22:59 0:2.6 'AMR0' (F96E8190) 16:22:59 Bridges found: 16:22:59 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96E5C20) _PRT 16:22:59 0:1.0 class:604 type: 1 Bus 0->1 16:22:59 IRQLinks found: 16:22:59 0: 'LNKB' (F96E8488) P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3 16:22:59 A[] 16:22:59 1: 'LNKC' (F96E86E0) P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:2.7 16:22:59 A[] 16:22:59 2: 'LNKD' (F96E8938) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:8.0 0:4.0 16:22:59 A[] 16:22:59 3: 'LNKA' (F96E8230) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 1:0.0 0:2.5 16:22:59 A[] 16:22:59 Set: 5 4: 'LNKE' (F96E8B90) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0 16:22:59 A[] 16:22:59 5: 'LNKF' (F96E8DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1 16:22:59 A[] 16:22:59 6: 'LNKG' (F96E9040) P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2 16:22:59 A[] 16:22:59 7: 'LNKH' (F96E9298) P[ 3, 4, 5, 6, 7,*9, 10, 11, 12, 14, 15] <- 0:3.3 16:22:59 A[] 16:22:59 PCI devices found: 16:22:59 0:0.0 1039:648 'PCI0' 16:22:59 0:1.0 1039:1 16:22:59 0:2.0 1039:8 'S962' 16:22:59 0:2.3 1039:7007 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 16:22:59 0:2.5 1039:5513 'IDEC' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 16:22:59 0:2.7 1039:7012 'AUD0' IRQs: PCI:5 PIC:'LNKC':5 APIC:18 16:22:59 0:3.0 1039:7001 'USB0' IRQs: PCI:5 PIC:'LNKE': R 5 APIC:20 16:22:59 0:3.1 1039:7001 'USB1' IRQs: PCI:12 PIC:'LNKF':12 APIC:21 16:22:59 0:3.2 1039:7001 'USB2' IRQs: PCI:11 PIC:'LNKG':11 APIC:22 16:22:59 0:3.3 1039:7002 'USB3' IRQs: PCI:9 PIC:'LNKH':9 APIC:23 16:22:59 0:4.0 1039:900 'MAC0' IRQs: PCI:12 PIC:'LNKD':12 APIC:19 16:22:59 0:8.0 1131:7134 IRQs: PCI:12 PIC:'LNKD':12 APIC:19 16:22:59 0:10.0 8086:1040 IRQs: PCI:3 PIC:'LNKB':3 APIC:17 16:22:59 1:0.0 10DE:281 IRQs: PCI:11 PIC:'LNKA':11 APIC:16 16:22:59 Bus detected - 1 16:22:59 ** AcpiInstall Power Device Status = 0 16:22:59 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 16:22:59 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 16:22:59 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 16:22:59 ** AcpiInstall PMTimer Device Status = 0 16:22:59 ** Total use:94208 unuse:9016 count:1573 ** 16:22:59 Event [_L13] Install GPE0x13 16:22:59 Event [_L0E] Install GPE0xE 16:22:59 Event [_L04] Install GPE0x4 16:22:59 Event [_L07] Install GPE0x7 16:22:59 Event [_L06] Install GPE0x6 16:22:59 Event [_L05] Install GPE0x5 16:22:59 Event [_L08] Install GPE0x8 16:22:59 Event [_L0F] Install GPE0xF 16:22:59 Event [_L0D] Install GPE0xD 16:22:59 Event [_L0B] Install GPE0xB 16:22:59 Event [_L0C] Install GPE0xC 16:22:59 EndScan GPE Status 0 16:23:3 APM: PSD find success. PSD Ftable:F97402BC 16:23:3 APM:Max C state 0 16:23:3 Register Notify 1st FD05929D 16:23:6 FindPCIDevice 16:23:6 Need: B:0x0 D:0x2 F:0x5 16:23:6 Finding APIC0 PIC11 Dev: [IDEC] 16:23:36 Uniaud32: PSD find success. PSD Ftable:F97402BC 16:23:36 FindPCIDevice 16:23:36 Need: B:0x0 D:0x2 F:0x0 16:23:38 APM: End scan power object 16:23:41 ===== Info ======== 16:23:41 Int Level 9 16:23:41 In Xrupt F96EFDB8 in arg F96EFDB8 16:23:41 Node 16:23:41 Name [_GPE] 16:23:41 Flags: 0x0 16:23:41 Reg count 2 16:23:41 GPE0x4 Type: Wake 16:23:41 GPE0x5 Type: Wake 16:23:41 GPE0x6 Type: Wake 16:23:41 GPE0x7 Type: Wake 16:23:41 GPE0x8 Type: Wake 16:23:41 GPE0xB Type: Wake 16:23:41 GPE0xC Type: Wake 16:23:41 GPE0xD Type: Wake 16:23:41 GPE0xE Type: Wake 16:23:41 GPE0xF Type: Wake 16:23:41 ===== Info ======== 16:23:41 Int Level 9 16:23:41 In Xrupt F96EFDB8 in arg F96EFF30 16:23:41 Node 16:23:41 Name [_GPE] 16:23:41 Flags: 0x0 16:23:41 Reg count 2 16:23:41 GPE0x3 Type: Wake 16:23:46 ** Event tread ** 16:23:46 AllocateSuspendMemory s_cpu:0 16:23:46 Alloc s_cpu OK CPU0 2304 bytes at 2E 16:23:46 AllocSuspend: CPU0 CR3:1FF000 16:23:46 Status 1Mb alloc 0 21 Jul 16:23:47 acpica$ log is reading 16:23:47 APM: Setting suspend state:3 16:23:47 APM:Max C state 2 21 Jul 16:28:13 AcpiDaemon LID device not finding, finish thread 00 --:--:-- PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 16:27:25 CFG: Link [LNKE] IRQ5 16:27:25 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 16:27:25 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 16:27:25 AcpiOsPredefinedOverride: "_REV" 16:27:25 AcpiOsPredefinedOverride: "_OS_" 16:27:25 AcpiOsPredefinedOverride: override to eComStation 16:27:25 AcpiOsPredefinedOverride: "_GL_" 16:27:25 AcpiOsPredefinedOverride: "_OSI" 16:27:25 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 16:27:25 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:27:25 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:27:25 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 16:27:25 ACPI: FACS @ 0x7FFF0000/0x40 16:27:25 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:27:25 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 16:27:25 Table [DSDT] 16:27:25 Table [FACS] 16:27:25 Table [FACP] 16:27:25 Table [APIC] 16:27:25 Local APIC address: FEE00000h 16:27:25 System also has 8259 16:27:25 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 16:27:25 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 16:27:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 16:27:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 16:27:25 Size of FACDT 244 16:27:25 Type of computer - Unspecified 16:27:25 System vector the SCI interrupt is wired to in 8259 mode. 9 16:27:25 System port address of the SMI Command Port 0x1048 16:27:25 The value to write to SMI_CMD to disable SMI 0x81 16:27:25 The value to write to SMI_CMD to re-enable SMI 0x80 16:27:25 The value to write to SMI_CMD to enter the S4BIOS state 0x0 16:27:25 System port address of the PM1a Event Register Block 1000 16:27:25 System port address of the PM1b Event Register Block 0 16:27:25 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 16:27:25 System port address of the PM1a Control Register Block 1004 16:27:25 System port address of the PM1b Control Register Block 0 16:27:25 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 16:27:25 System port address of the PM2 Control Register Block 1016 16:27:25 Number of bytes decoded by PM2_CNT_BLK 1 16:27:25 System port address of the Power Management Timer Control Register Block 1008 16:27:25 Number of bytes decoded by PM_TMR_BLK (=4) 4 16:27:25 System port address of General-Purpose Event 0 Register Block 1020 16:27:25 System port address of General-Purpose Event 1 Register Block 1030 16:27:25 Number of bytes decoded by GPE0_BLK 0x4 16:27:25 Number of bytes decoded by GPE1_BLK 0x4 16:27:25 Offset within the ACPI general-purpose event model where GPE1 based events start 10 16:27:25 The worst-case hardware latency to enter and exit a C2 state 90 us 16:27:25 The worst-case hardware latency to enter and exit a C3 state 900 us 16:27:25 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 16:27:25 The RTC CMOS RAM index to the day-of-month alarm value 126 16:27:25 The RTC CMOS RAM index to the month of year alarm value 127 16:27:25 IA-PC Boot Architecture Flags 0x0 16:27:25 Fixed feature flags 4A5 16:27:25 The reset register: 16:27:25 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 16:27:25 The value to write to the RESET_REG port to reset the system 0 16:27:25 ***** Throttl Width 0 Offset 1 16:27:25 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 16:27:25 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:27:25 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:27:25 ** Scan EC Status = 0 Find 0 EC 16:27:25 ** AcpiInitializeObjects mask:0 Status = 0 16:27:25 Processor [CPU0] 16:27:25 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 16:27:25 Status Evaluate Processor 0x0 AE_OK 16:27:25 Usable:1 Counter:0 16:27:25 CPU id to N:0 16:27:25 ProcId: 0x0 16:27:25 P_BLK: 0x0 16:27:25 P_BLK len: 0x0 16:27:25 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 16:27:25 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 16:27:25 ** AcpiInstall Power Device Status = 0 16:27:25 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 16:27:25 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 16:27:25 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 16:27:25 ** AcpiInstall PMTimer Device Status = 0 16:27:25 ** Total use:77360 unuse:11376 count:1533 ** 16:27:25 Event [_L13] Install GPE0x13 16:27:25 Event [_L0E] Install GPE0xE 16:27:25 Event [_L04] Install GPE0x4 16:27:25 Event [_L07] Install GPE0x7 16:27:25 Event [_L06] Install GPE0x6 16:27:25 Event [_L05] Install GPE0x5 16:27:25 Event [_L08] Install GPE0x8 16:27:25 Event [_L0F] Install GPE0xF 16:27:25 Event [_L0D] Install GPE0xD 16:27:25 Event [_L0B] Install GPE0xB 16:27:25 Event [_L0C] Install GPE0xC 16:27:25 EndScan GPE Status 0 16:27:29 APM: PSD find success. PSD Ftable:F97402BC 16:27:29 APM:Max C state 0 16:27:29 Register Notify 1st FD05929D 16:27:32 FindPCIDevice 16:28:3 Uniaud32: PSD find success. PSD Ftable:F97402BC 16:28:3 FindPCIDevice 16:28:5 APM: End scan power object 16:28:8 ===== Info ======== 16:28:8 Int Level 9 16:28:8 In Xrupt F96EFDB8 in arg F96EFDB8 16:28:8 Node 16:28:8 Name [_GPE] 16:28:8 Flags: 0x0 16:28:8 Reg count 2 16:28:8 GPE0x4 Type: Wake 16:28:8 GPE0x5 Type: Wake 16:28:8 GPE0x6 Type: Wake 16:28:8 GPE0x7 Type: Wake 16:28:8 GPE0x8 Type: Wake 16:28:8 GPE0xB Type: Wake 16:28:8 GPE0xC Type: Wake 16:28:8 GPE0xD Type: Wake 16:28:8 GPE0xE Type: Wake 16:28:8 GPE0xF Type: Wake 16:28:8 ===== Info ======== 16:28:8 Int Level 9 16:28:8 In Xrupt F96EFDB8 in arg F96EFF30 16:28:8 Node 16:28:8 Name [_GPE] 16:28:8 Flags: 0x0 16:28:8 Reg count 2 16:28:8 GPE0x3 Type: Wake 16:28:13 ** Event tread ** 16:28:13 AllocateSuspendMemory s_cpu:0 16:28:13 Alloc s_cpu OK CPU0 2304 bytes at D 16:28:13 AllocSuspend: CPU0 CR3:1FF000 16:28:13 Status 1Mb alloc 0 21 Jul 16:28:14 acpica$ log is reading 16:28:14 APM: Setting suspend state:3 16:28:14 APM:Max C state 2 21 Jul 16:53:50 acpica$ log is reading --:--:-- KEE Version 0x10000 --:--:-- PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 16:53:1 CFG: Link [LNKE] IRQ5 16:53:1 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 16:53:1 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 16:53:1 AcpiOsPredefinedOverride: "_REV" 16:53:1 AcpiOsPredefinedOverride: "_OS_" 16:53:1 AcpiOsPredefinedOverride: override to eComStation 16:53:1 AcpiOsPredefinedOverride: "_GL_" 16:53:1 AcpiOsPredefinedOverride: "_OSI" 16:53:1 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 16:53:1 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:53:1 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:53:1 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 16:53:1 ACPI: FACS @ 0x7FFF0000/0x40 16:53:1 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 16:53:1 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 16:53:2 Table [DSDT] 16:53:2 Table [FACS] 16:53:2 Table [FACP] 16:53:2 Table [APIC] 16:53:2 Local APIC address: FEE00000h 16:53:2 System also has 8259 16:53:2 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 16:53:2 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 16:53:2 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 16:53:2 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 16:53:2 Size of FACDT 244 16:53:2 Type of computer - Unspecified 16:53:2 System vector the SCI interrupt is wired to in 8259 mode. 9 16:53:2 System port address of the SMI Command Port 0x1048 16:53:2 The value to write to SMI_CMD to disable SMI 0x81 16:53:2 The value to write to SMI_CMD to re-enable SMI 0x80 16:53:2 The value to write to SMI_CMD to enter the S4BIOS state 0x0 16:53:2 System port address of the PM1a Event Register Block 1000 16:53:2 System port address of the PM1b Event Register Block 0 16:53:2 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 16:53:2 System port address of the PM1a Control Register Block 1004 16:53:2 System port address of the PM1b Control Register Block 0 16:53:2 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 16:53:2 System port address of the PM2 Control Register Block 1016 16:53:2 Number of bytes decoded by PM2_CNT_BLK 1 16:53:2 System port address of the Power Management Timer Control Register Block 1008 16:53:2 Number of bytes decoded by PM_TMR_BLK (=4) 4 16:53:2 System port address of General-Purpose Event 0 Register Block 1020 16:53:2 System port address of General-Purpose Event 1 Register Block 1030 16:53:2 Number of bytes decoded by GPE0_BLK 0x4 16:53:2 Number of bytes decoded by GPE1_BLK 0x4 16:53:2 Offset within the ACPI general-purpose event model where GPE1 based events start 10 16:53:2 The worst-case hardware latency to enter and exit a C2 state 90 us 16:53:2 The worst-case hardware latency to enter and exit a C3 state 900 us 16:53:2 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 16:53:2 The RTC CMOS RAM index to the day-of-month alarm value 126 16:53:2 The RTC CMOS RAM index to the month of year alarm value 127 16:53:2 IA-PC Boot Architecture Flags 0x0 16:53:2 Fixed feature flags 4A5 16:53:2 The reset register: 16:53:2 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 16:53:2 The value to write to the RESET_REG port to reset the system 0 16:53:2 ***** Throttl Width 0 Offset 1 16:53:2 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 16:53:2 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:53:2 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 16:53:2 ** Scan EC Status = 0 Find 0 EC 16:53:2 ** AcpiInitializeObjects mask:0 Status = 0 16:53:2 Processor [CPU0] 16:53:2 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 16:53:2 Status Evaluate Processor 0x0 AE_OK 16:53:2 Usable:1 Counter:0 16:53:2 CPU id to N:0 16:53:2 ProcId: 0x0 16:53:2 P_BLK: 0x0 16:53:2 P_BLK len: 0x0 16:53:2 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 16:53:2 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 16:53:2 ** AcpiInstall Power Device Status = 0 16:53:2 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 16:53:2 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 16:53:2 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 16:53:2 ** AcpiInstall PMTimer Device Status = 0 16:53:2 ** Total use:77360 unuse:11376 count:1533 ** 16:53:2 Event [_L13] Install GPE0x13 16:53:2 Event [_L0E] Install GPE0xE 16:53:2 Event [_L04] Install GPE0x4 16:53:2 Event [_L07] Install GPE0x7 16:53:2 Event [_L06] Install GPE0x6 16:53:2 Event [_L05] Install GPE0x5 16:53:2 Event [_L08] Install GPE0x8 16:53:2 Event [_L0F] Install GPE0xF 16:53:2 Event [_L0D] Install GPE0xD 16:53:2 Event [_L0B] Install GPE0xB 16:53:2 Event [_L0C] Install GPE0xC 16:53:2 EndScan GPE Status 0 16:53:6 APM: PSD find success. PSD Ftable:F97402BC 16:53:6 APM:Max C state 0 16:53:6 Register Notify 1st FD05929D 16:53:8 FindPCIDevice 16:53:39 Uniaud32: PSD find success. PSD Ftable:F97402BC 16:53:39 FindPCIDevice 16:53:41 APM: End scan power object 16:53:44 ===== Info ======== 16:53:44 Int Level 9 16:53:44 In Xrupt F96EFDB8 in arg F96EFDB8 16:53:44 Node 16:53:44 Name [_GPE] 16:53:44 Flags: 0x0 16:53:44 Reg count 2 16:53:44 GPE0x4 Type: Wake 16:53:44 GPE0x5 Type: Wake 16:53:44 GPE0x6 Type: Wake 16:53:44 GPE0x7 Type: Wake 16:53:44 GPE0x8 Type: Wake 16:53:44 GPE0xB Type: Wake 16:53:44 GPE0xC Type: Wake 16:53:44 GPE0xD Type: Wake 16:53:44 GPE0xE Type: Wake 16:53:44 GPE0xF Type: Wake 16:53:44 ===== Info ======== 16:53:44 Int Level 9 16:53:44 In Xrupt F96EFDB8 in arg F96EFF30 16:53:44 Node 16:53:44 Name [_GPE] 16:53:44 Flags: 0x0 16:53:44 Reg count 2 16:53:44 GPE0x3 Type: Wake 16:53:50 ** Event tread ** 16:53:50 AllocateSuspendMemory s_cpu:0 16:53:50 Alloc s_cpu OK CPU0 2304 bytes at 32 16:53:50 AllocSuspend: CPU0 CR3:1FF000 16:53:50 Status 1Mb alloc 0 21 Jul 16:53:50 acpica$ log is reading 16:53:50 APM: Setting suspend state:3 16:53:50 APM:Max C state 2 25 Jul 08:18:12 acpica$ logLID device not finding, finish thread 00 --:--:-- PSD_install options:" /!NOD" --:--:-- @#netlabs dot org:3.16#@##1## 24 Jun 2009 06:24:11 pasha::::0::@@ ACPI core PSD Driver. (c) netlabs.org 2005-2009 Build date: Jun 24 2009 06:25:06 --:--:-- MPDATA:FFECD000 ESP:FFECDA70 Sel:0 UsCPU:0 --:--:-- SS Selector fault 8:17:25 CFG: Link [LNKE] IRQ5 8:17:25 AcpiOsInitialize ALLOC size 65536 at 0xF96E3000 8:17:25 AcpiOsInitialize MapMem size 4096 at 0xFFEA2000 8:17:25 AcpiOsPredefinedOverride: "_REV" 8:17:25 AcpiOsPredefinedOverride: "_OS_" 8:17:25 AcpiOsPredefinedOverride: override to eComStation 8:17:25 AcpiOsPredefinedOverride: "_GL_" 8:17:25 AcpiOsPredefinedOverride: "_OSI" 8:17:25 ACPI: RSDP @ 0xF7350/0x14 (v0 AWARD ) 8:17:25 ACPI: RSDT @ 0x7FFF3000/0x2C (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 8:17:25 ACPI: FACP @ 0x7FFF3040/0x74 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 8:17:25 ACPI: DSDT @ 0x7FFF30C0/0x38BB (v1 AWARD AWRDACPI 0x1000 MSFT 0x100000D) 8:17:25 ACPI: FACS @ 0x7FFF0000/0x40 8:17:25 ACPI: APIC @ 0x7FFF6980/0x54 (v1 AWARD AWRDACPI 0x42302E31 AWRD 0x0) 8:17:25 AcpiOsTableOverride Ex:FFE8C0C0 New:FFDEBDA4 SIG:[DSDT] 8:17:25 Table [DSDT] 8:17:25 Table [FACS] 8:17:25 Table [FACP] 8:17:25 Table [APIC] 8:17:25 Local APIC address: FEE00000h 8:17:25 System also has 8259 8:17:25 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable 8:17:25 APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 8:17:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec 8:17:25 APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Bus spec Trigger by: Bus spec 8:17:25 Size of FACDT 244 8:17:25 Type of computer - Unspecified 8:17:25 System vector the SCI interrupt is wired to in 8259 mode. 9 8:17:25 System port address of the SMI Command Port 0x1048 8:17:25 The value to write to SMI_CMD to disable SMI 0x81 8:17:25 The value to write to SMI_CMD to re-enable SMI 0x80 8:17:25 The value to write to SMI_CMD to enter the S4BIOS state 0x0 8:17:25 System port address of the PM1a Event Register Block 1000 8:17:25 System port address of the PM1b Event Register Block 0 8:17:25 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 8:17:25 System port address of the PM1a Control Register Block 1004 8:17:25 System port address of the PM1b Control Register Block 0 8:17:25 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 8:17:25 System port address of the PM2 Control Register Block 1016 8:17:25 Number of bytes decoded by PM2_CNT_BLK 1 8:17:25 System port address of the Power Management Timer Control Register Block 1008 8:17:25 Number of bytes decoded by PM_TMR_BLK (=4) 4 8:17:25 System port address of General-Purpose Event 0 Register Block 1020 8:17:25 System port address of General-Purpose Event 1 Register Block 1030 8:17:25 Number of bytes decoded by GPE0_BLK 0x4 8:17:25 Number of bytes decoded by GPE1_BLK 0x4 8:17:25 Offset within the ACPI general-purpose event model where GPE1 based events start 10 8:17:25 The worst-case hardware latency to enter and exit a C2 state 90 us 8:17:25 The worst-case hardware latency to enter and exit a C3 state 900 us 8:17:25 The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 8:17:25 The RTC CMOS RAM index to the day-of-month alarm value 126 8:17:25 The RTC CMOS RAM index to the month of year alarm value 127 8:17:25 IA-PC Boot Architecture Flags 0x0 8:17:25 Fixed feature flags 4A5 8:17:25 The reset register: 8:17:25 Type of address space - System Memory Address 0x0 Width 0 Offset 0 Access size 0 8:17:25 The value to write to the RESET_REG port to reset the system 0 8:17:25 ***** Throttl Width 0 Offset 1 8:17:25 AcpiOsInstallIntterrupHandler IRQ9 handler F9784E7B 8:17:25 AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 8:17:25 AcpiOsDerivePCIID([PCI0] ,[PIR2],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0 8:17:25 ** Scan EC Status = 0 Find 0 EC 8:17:25 ** AcpiInitializeObjects mask:0 Status = 0 8:17:25 Processor [CPU0] 8:17:25 Status Evaluate Processor PDC 0x5 AE_NOT_FOUND 8:17:25 Status Evaluate Processor 0x0 AE_OK 8:17:25 Usable:1 Counter:0 8:17:25 CPU id to N:0 8:17:25 ProcId: 0x0 8:17:25 P_BLK: 0x0 8:17:25 P_BLK len: 0x0 8:17:25 CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND 8:17:25 CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND 8:17:25 ** AcpiInstall Power Device Status = 0 8:17:25 ACPI Error (evxfevnt-296): Could not enable SleepButton event [20081204] 8:17:25 ACPI Warning (evxface-235): Could not enable fixed event 3 [20081204] 8:17:25 ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE 8:17:25 ** AcpiInstall PMTimer Device Status = 0 8:17:25 ** Total use:77360 unuse:11376 count:1533 ** 8:17:25 Event [_L13] Install GPE0x13 8:17:25 Event [_L0E] Install GPE0xE 8:17:25 Event [_L04] Install GPE0x4 8:17:25 Event [_L07] Install GPE0x7 8:17:25 Event [_L06] Install GPE0x6 8:17:25 Event [_L05] Install GPE0x5 8:17:25 Event [_L08] Install GPE0x8 8:17:25 Event [_L0F] Install GPE0xF 8:17:25 Event [_L0D] Install GPE0xD 8:17:25 Event [_L0B] Install GPE0xB 8:17:25 Event [_L0C] Install GPE0xC 8:17:25 EndScan GPE Status 0 8:17:29 APM: PSD find success. PSD Ftable:F97402BC 8:17:29 APM:Max C state 0 8:17:29 Register Notify 1st FD05929D 8:17:31 FindPCIDevice 8:18:2 Uniaud32: PSD find success. PSD Ftable:F97402BC 8:18:2 FindPCIDevice 8:18:4 APM: End scan power object 8:18:7 ===== Info ======== 8:18:7 Int Level 9 8:18:7 In Xrupt F96EFDB8 in arg F96EFDB8 8:18:7 Node 8:18:7 Name [_GPE] 8:18:7 Flags: 0x0 8:18:7 Reg count 2 8:18:7 GPE0x4 Type: Wake 8:18:7 GPE0x5 Type: Wake 8:18:7 GPE0x6 Type: Wake 8:18:7 GPE0x7 Type: Wake 8:18:7 GPE0x8 Type: Wake 8:18:7 GPE0xB Type: Wake 8:18:7 GPE0xC Type: Wake 8:18:7 GPE0xD Type: Wake 8:18:7 GPE0xE Type: Wake 8:18:7 GPE0xF Type: Wake 8:18:7 ===== Info ======== 8:18:7 Int Level 9 8:18:7 In Xrupt F96EFDB8 in arg F96EFF30 8:18:7 Node 8:18:7 Name [_GPE] 8:18:7 Flags: 0x0 8:18:7 Reg count 2 8:18:7 GPE0x3 Type: Wake 8:18:12 ** Event tread ** 8:18:12 AllocateSuspendMemory s_cpu:0 8:18:12 Alloc s_cpu OK CPU0 2304 bytes at C 8:18:12 AllocSuspend: CPU0 CR3:1FF000 8:18:12 Status 1Mb alloc 0 25 Jul 08:18:12 acpica$ log is reading 8:18:12 APM: Setting suspend state:3 8:18:12 APM:Max C state 2