1 | 24 Feb 06:26:32 acpica$ log is reading |
---|
2 | KEE Version 0x10000 |
---|
3 | |
---|
4 | PSD_install options:" /!NOD /SMP /OS="Microsoft 2000" /OSI="Windows 2001"" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
---|
5 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
6 | New Stack = FFD00000 Size:0x8000 |
---|
7 | AcpiOsInitialize ALLOC size 65536 at 0xF92D0000 |
---|
8 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
9 | AcpiOsCreateLock F98171A0 |
---|
10 | AcpiOsCreateLock F981CB64 |
---|
11 | AcpiOsPredefinedOverride: "_REV" |
---|
12 | AcpiOsPredefinedOverride: "_OS_" |
---|
13 | AcpiOsPredefinedOverride: override to Microsoft 2000 |
---|
14 | AcpiOsPredefinedOverride: "_GL_" |
---|
15 | AcpiOsPredefinedOverride: "_OSI" |
---|
16 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
17 | ACPI: RSDP @ 0xF7360/0x14 (v0 GBT ) |
---|
18 | ACPI: RSDT @ 0xCFEE3000/0x34 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
19 | ACPI: FACP @ 0xCFEE3040/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
20 | ACPI: DSDT @ 0xCFEE30C0/0x72C9 (v1 GBT GBTUACPI 0x1000 MSFT 0x3000000) |
---|
21 | ACPI: FACS @ 0xCFEE0000/0x40 |
---|
22 | ACPI: HPET @ 0xCFEEA480/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) |
---|
23 | ACPI: MCFG @ 0xCFEEA4C0/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
24 | ACPI: APIC @ 0xCFEEA3C0/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
25 | *** AcpiInitializeTables Status = 0 *** |
---|
26 | AcpiOsTableOverride Ex:FFCD80C0 New:FFCFFFBC SIG:[DSDT] |
---|
27 | *** AcpiLoadTables Status = 0 *** |
---|
28 | Table [DSDT] |
---|
29 | Table [FACS] |
---|
30 | Table [FACP] |
---|
31 | Table [HPET] |
---|
32 | Table [MCFG] |
---|
33 | Table [APIC] |
---|
34 | Local APIC address: FEE00000h |
---|
35 | System also has 8259 |
---|
36 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
37 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
38 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable |
---|
39 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
---|
40 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
41 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
42 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level |
---|
43 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
44 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
45 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
46 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
47 | Size of FACDT 244 |
---|
48 | Type of computer - Unspecified |
---|
49 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
50 | System port address of the SMI Command Port 0xB0 |
---|
51 | The value to write to SMI_CMD to disable SMI 0xA1 |
---|
52 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
---|
53 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
54 | System port address of the PM1a Event Register Block 4000 |
---|
55 | System port address of the PM1b Event Register Block 0 |
---|
56 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
57 | System port address of the PM1a Control Register Block 4004 |
---|
58 | System port address of the PM1b Control Register Block 0 |
---|
59 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
60 | System port address of the PM2 Control Register Block 4050 |
---|
61 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
62 | System port address of the Power Management Timer Control Register Block 4008 |
---|
63 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
64 | System port address of General-Purpose Event 0 Register Block 4020 |
---|
65 | System port address of General-Purpose Event 1 Register Block 0 |
---|
66 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
67 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
68 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
69 | GPE enable register: 0: 0: 0: 0 |
---|
70 | GPE status register: 8: 41: 0: C4 |
---|
71 | The system does not support a C2 state. 65 |
---|
72 | The system does not support a C3 state 3E9 |
---|
73 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
74 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
75 | IA-PC Boot Architecture Flags 0x0 |
---|
76 | Fixed feature flags 1AD |
---|
77 | The reset register: |
---|
78 | Type of address space - System Memory |
---|
79 | Register Bit Width 0 |
---|
80 | Register Bit Offset 0 |
---|
81 | Access size 0 |
---|
82 | Address 0 |
---|
83 | The value to write to the RESET_REG port to reset the system 0 |
---|
84 | ***** Throttl Width 0 Offset 1 |
---|
85 | AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB |
---|
86 | ** AcpiEnableSubsystem Status = 0 |
---|
87 | AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
---|
88 | ** Scan EC Status = 0 |
---|
89 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
90 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
91 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
92 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
93 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
94 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
95 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
96 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
97 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
98 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
99 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
100 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
101 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
102 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
103 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
104 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
105 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
106 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
107 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
108 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
109 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
110 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
111 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
112 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
113 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
114 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
115 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
116 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
117 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
118 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
119 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
120 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
121 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
122 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
123 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
124 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
125 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
126 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
127 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
128 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
129 | ** AcpiInitializeObjects mask:0 Status = 0 |
---|
130 | Processor [C000] |
---|
131 | Processor [C001] |
---|
132 | Processor [C002] |
---|
133 | Processor [C003] |
---|
134 | Status 0x0 0 |
---|
135 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
136 | Status Evaluate Processor 0x0 AE_OK |
---|
137 | Usable:4 Counter:0 |
---|
138 | CPU id to N:0 |
---|
139 | ProcId: 0x0 |
---|
140 | P_BLK: 0x4010 |
---|
141 | P_BLK len: 0x6 |
---|
142 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
143 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
144 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
145 | Status Evaluate Processor 0x0 AE_OK |
---|
146 | Usable:4 Counter:1 |
---|
147 | CPU id to N:1 |
---|
148 | ProcId: 0x1 |
---|
149 | P_BLK: 0x4010 |
---|
150 | P_BLK len: 0x6 |
---|
151 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
152 | CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
153 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
154 | Status Evaluate Processor 0x0 AE_OK |
---|
155 | Usable:4 Counter:2 |
---|
156 | CPU id to N:2 |
---|
157 | ProcId: 0x2 |
---|
158 | P_BLK: 0x4010 |
---|
159 | P_BLK len: 0x6 |
---|
160 | CPU2 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
161 | CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
162 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
163 | Status Evaluate Processor 0x0 AE_OK |
---|
164 | Usable:4 Counter:3 |
---|
165 | CPU id to N:3 |
---|
166 | ProcId: 0x3 |
---|
167 | P_BLK: 0x4010 |
---|
168 | P_BLK len: 0x6 |
---|
169 | CPU3 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
170 | CPU3 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
171 | ** AcpiInstall Power Device Status = 0 |
---|
172 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
---|
173 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
---|
174 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
175 | ** AcpiInstall PMTimer Device Status = 0 |
---|
176 | ** Total use:183872 unuse:15488 count:3412 ** |
---|
177 | Get GpeHdl Status = 0 - AE_OK |
---|
178 | Event [_L04] |
---|
179 | Install GPE0x4 Status 0x0 |
---|
180 | Event [_L18] |
---|
181 | Install GPE0x18 Status 0x0 |
---|
182 | Event [_L03] |
---|
183 | Install GPE0x3 Status 0x0 |
---|
184 | Event [_L0B] |
---|
185 | Install GPE0xB Status 0x0 |
---|
186 | Event [_L1B] |
---|
187 | Install GPE0x1B Status 0x0 |
---|
188 | EndScan GPE Status 0 |
---|
189 | ===== Info ======== |
---|
190 | Int Level 9 |
---|
191 | In Xrupt F92C3D90 in arg F92C3D90 |
---|
192 | Node |
---|
193 | Name [_GPE] |
---|
194 | Flags: 0 |
---|
195 | Reg count 4 |
---|
196 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
197 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
198 | GPE0 Status:4020 Enable:4024 EnableWake:18 EnableRun:0 BaseGPENumber:0 |
---|
199 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
200 | GPE1 Status:4021 Enable:4025 EnableWake:8 EnableRun:0 BaseGPENumber:8 |
---|
201 | GPE2 Status:4022 Enable:4026 EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
202 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
203 | GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
204 | GPE3 Status:4023 Enable:4027 EnableWake:9 EnableRun:0 BaseGPENumber:18 |
---|
205 | =========== Status 0x0 0 |
---|
206 | PSDFree: at 0xF9800000 success! |
---|
207 | FindPCIDevice |
---|
208 | FindPCIDevice |
---|
209 | FindPCIDevice |
---|
210 | APM: PSD find success. PSD Ftable:F981017C |
---|
211 | APM:Max C state 0 |
---|
212 | Register Notify 1st FFCD528D |
---|
213 | Gradd: PSD find success. PSD Ftable:F981017C |
---|
214 | ******** Event tread *************** |
---|
215 | AllocateSuspendMemory s_cpu:0 |
---|
216 | Alloc s_cpu OK CPU0 2304 bytes at 0 |
---|
217 | AllocSuspend: CPU0 CR3:211000 |
---|
218 | AllocSuspend: CPU1 CR3:F05000 |
---|
219 | AllocSuspend: CPU2 CR3:EFC000 |
---|
220 | AllocSuspend: CPU3 CR3:EF4000 |
---|
221 | Status 1Mb alloc 0 |
---|
222 | 24 Feb 06:26:32 acpica$ log is reading |
---|
223 | APM: Setting suspend state:1 |
---|
224 | 24 Feb 06:41:02 acpica$ log is reading |
---|
225 | KEE Version 0x10000 |
---|
226 | |
---|
227 | PSD_install options:" /!NOD /SMP" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
---|
228 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
229 | New Stack = FFD00000 Size:0x8000 |
---|
230 | AcpiOsInitialize ALLOC size 65536 at 0xF92D0000 |
---|
231 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
232 | AcpiOsCreateLock F98171A0 |
---|
233 | AcpiOsCreateLock F981CB64 |
---|
234 | AcpiOsPredefinedOverride: "_REV" |
---|
235 | AcpiOsPredefinedOverride: "_OS_" |
---|
236 | AcpiOsPredefinedOverride: override to eComStation |
---|
237 | AcpiOsPredefinedOverride: "_GL_" |
---|
238 | AcpiOsPredefinedOverride: "_OSI" |
---|
239 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
240 | ACPI: RSDP @ 0xF7360/0x14 (v0 GBT ) |
---|
241 | ACPI: RSDT @ 0xCFEE3000/0x34 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
242 | ACPI: FACP @ 0xCFEE3040/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
243 | ACPI: DSDT @ 0xCFEE30C0/0x72C9 (v1 GBT GBTUACPI 0x1000 MSFT 0x3000000) |
---|
244 | ACPI: FACS @ 0xCFEE0000/0x40 |
---|
245 | ACPI: HPET @ 0xCFEEA480/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) |
---|
246 | ACPI: MCFG @ 0xCFEEA4C0/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
247 | ACPI: APIC @ 0xCFEEA3C0/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
248 | *** AcpiInitializeTables Status = 0 *** |
---|
249 | AcpiOsTableOverride Ex:FFCD80C0 New:FFCFFFBC SIG:[DSDT] |
---|
250 | *** AcpiLoadTables Status = 0 *** |
---|
251 | Table [DSDT] |
---|
252 | Table [FACS] |
---|
253 | Table [FACP] |
---|
254 | Table [HPET] |
---|
255 | Table [MCFG] |
---|
256 | Table [APIC] |
---|
257 | Local APIC address: FEE00000h |
---|
258 | System also has 8259 |
---|
259 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
260 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
261 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable |
---|
262 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
---|
263 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
264 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
265 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level |
---|
266 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
267 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
268 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
269 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
270 | Size of FACDT 244 |
---|
271 | Type of computer - Unspecified |
---|
272 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
273 | System port address of the SMI Command Port 0xB0 |
---|
274 | The value to write to SMI_CMD to disable SMI 0xA1 |
---|
275 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
---|
276 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
277 | System port address of the PM1a Event Register Block 4000 |
---|
278 | System port address of the PM1b Event Register Block 0 |
---|
279 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
280 | System port address of the PM1a Control Register Block 4004 |
---|
281 | System port address of the PM1b Control Register Block 0 |
---|
282 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
283 | System port address of the PM2 Control Register Block 4050 |
---|
284 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
285 | System port address of the Power Management Timer Control Register Block 4008 |
---|
286 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
287 | System port address of General-Purpose Event 0 Register Block 4020 |
---|
288 | System port address of General-Purpose Event 1 Register Block 0 |
---|
289 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
290 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
291 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
292 | GPE enable register: 0: 0: 0: 0 |
---|
293 | GPE status register: 8: 41: 0: C4 |
---|
294 | The system does not support a C2 state. 65 |
---|
295 | The system does not support a C3 state 3E9 |
---|
296 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
297 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
298 | IA-PC Boot Architecture Flags 0x0 |
---|
299 | Fixed feature flags 1AD |
---|
300 | The reset register: |
---|
301 | Type of address space - System Memory |
---|
302 | Register Bit Width 0 |
---|
303 | Register Bit Offset 0 |
---|
304 | Access size 0 |
---|
305 | Address 0 |
---|
306 | The value to write to the RESET_REG port to reset the system 0 |
---|
307 | ***** Throttl Width 0 Offset 1 |
---|
308 | AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB |
---|
309 | ** AcpiEnableSubsystem Status = 0 |
---|
310 | AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
---|
311 | ** Scan EC Status = 0 |
---|
312 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
313 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
314 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
315 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
316 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
317 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
318 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
319 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
320 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
321 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
322 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
323 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
324 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
325 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
326 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
327 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
328 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
329 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
330 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
331 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
332 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
333 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
334 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
335 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
336 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
337 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
338 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
339 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
340 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
341 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
342 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
343 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
344 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
345 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
346 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
347 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
348 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
349 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
350 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
351 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
352 | ** AcpiInitializeObjects mask:0 Status = 0 |
---|
353 | Processor [C000] |
---|
354 | Processor [C001] |
---|
355 | Processor [C002] |
---|
356 | Processor [C003] |
---|
357 | Status 0x0 0 |
---|
358 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
359 | Status Evaluate Processor 0x0 AE_OK |
---|
360 | Usable:4 Counter:0 |
---|
361 | CPU id to N:0 |
---|
362 | ProcId: 0x0 |
---|
363 | P_BLK: 0x4010 |
---|
364 | P_BLK len: 0x6 |
---|
365 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
366 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
367 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
368 | Status Evaluate Processor 0x0 AE_OK |
---|
369 | Usable:4 Counter:1 |
---|
370 | CPU id to N:1 |
---|
371 | ProcId: 0x1 |
---|
372 | P_BLK: 0x4010 |
---|
373 | P_BLK len: 0x6 |
---|
374 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
375 | CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
376 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
377 | Status Evaluate Processor 0x0 AE_OK |
---|
378 | Usable:4 Counter:2 |
---|
379 | CPU id to N:2 |
---|
380 | ProcId: 0x2 |
---|
381 | P_BLK: 0x4010 |
---|
382 | P_BLK len: 0x6 |
---|
383 | CPU2 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
384 | CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
385 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
386 | Status Evaluate Processor 0x0 AE_OK |
---|
387 | Usable:4 Counter:3 |
---|
388 | CPU id to N:3 |
---|
389 | ProcId: 0x3 |
---|
390 | P_BLK: 0x4010 |
---|
391 | P_BLK len: 0x6 |
---|
392 | CPU3 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
393 | CPU3 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
394 | PSDFree: at 0xF9800000 success! |
---|
395 | ** AcpiInstall Power Device Status = 0 |
---|
396 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
---|
397 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
---|
398 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
399 | ** AcpiInstall PMTimer Device Status = 0 |
---|
400 | ** Total use:183872 unuse:15488 count:3412 ** |
---|
401 | Get GpeHdl Status = 0 - AE_OK |
---|
402 | Event [_L04] |
---|
403 | Install GPE0x4 Status 0x0 |
---|
404 | Event [_L18] |
---|
405 | Install GPE0x18 Status 0x0 |
---|
406 | Event [_L03] |
---|
407 | Install GPE0x3 Status 0x0 |
---|
408 | Event [_L0B] |
---|
409 | Install GPE0xB Status 0x0 |
---|
410 | Event [_L1B] |
---|
411 | Install GPE0x1B Status 0x0 |
---|
412 | EndScan GPE Status 0 |
---|
413 | ===== Info ======== |
---|
414 | Int Level 9 |
---|
415 | In Xrupt F92C3D90 in arg F92C3D90 |
---|
416 | Node |
---|
417 | Name [_GPE] |
---|
418 | Flags: 0 |
---|
419 | Reg count 4 |
---|
420 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
421 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
422 | GPE0 Status:4020 Enable:4024 EnableWake:18 EnableRun:0 BaseGPENumber:0 |
---|
423 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
424 | GPE1 Status:4021 Enable:4025 EnableWake:8 EnableRun:0 BaseGPENumber:8 |
---|
425 | GPE2 Status:4022 Enable:4026 EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
426 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
427 | GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
428 | GPE3 Status:4023 Enable:4027 EnableWake:9 EnableRun:0 BaseGPENumber:18 |
---|
429 | =========== Status 0x0 0 |
---|
430 | FindPCIDevice |
---|
431 | FindPCIDevice |
---|
432 | FindPCIDevice |
---|
433 | APM: PSD find success. PSD Ftable:F981017C |
---|
434 | APM:Max C state 0 |
---|
435 | Register Notify 1st FFCD528D |
---|
436 | Gradd: PSD find success. PSD Ftable:F981017C |
---|
437 | ******** Event tread *************** |
---|
438 | AllocateSuspendMemory s_cpu:0 |
---|
439 | Alloc s_cpu OK CPU0 2304 bytes at 0 |
---|
440 | AllocSuspend: CPU0 CR3:211000 |
---|
441 | AllocSuspend: CPU1 CR3:F05000 |
---|
442 | AllocSuspend: CPU2 CR3:EFC000 |
---|
443 | AllocSuspend: CPU3 CR3:EF4000 |
---|
444 | Status 1Mb alloc 0 |
---|
445 | 24 Feb 06:41:02 acpica$ log is reading |
---|
446 | APM: Setting suspend state:1 |
---|
447 | 24 Feb 06:44:59 acpica$ log is reading |
---|
448 | KEE Version 0x10000 |
---|
449 | |
---|
450 | PSD_install options:" /!NOD /SMP" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
---|
451 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
452 | New Stack = FFD00000 Size:0x8000 |
---|
453 | AcpiOsInitialize ALLOC size 65536 at 0xF92D0000 |
---|
454 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
455 | AcpiOsCreateLock F98171A0 |
---|
456 | AcpiOsCreateLock F981CB64 |
---|
457 | AcpiOsPredefinedOverride: "_REV" |
---|
458 | AcpiOsPredefinedOverride: "_OS_" |
---|
459 | AcpiOsPredefinedOverride: override to eComStation |
---|
460 | AcpiOsPredefinedOverride: "_GL_" |
---|
461 | AcpiOsPredefinedOverride: "_OSI" |
---|
462 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
463 | ACPI: RSDP @ 0xF7360/0x14 (v0 GBT ) |
---|
464 | ACPI: RSDT @ 0xCFEE3000/0x34 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
465 | ACPI: FACP @ 0xCFEE3040/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
466 | ACPI: DSDT @ 0xCFEE30C0/0x72C9 (v1 GBT GBTUACPI 0x1000 MSFT 0x3000000) |
---|
467 | ACPI: FACS @ 0xCFEE0000/0x40 |
---|
468 | ACPI: HPET @ 0xCFEEA480/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) |
---|
469 | ACPI: MCFG @ 0xCFEEA4C0/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
470 | ACPI: APIC @ 0xCFEEA3C0/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
471 | *** AcpiInitializeTables Status = 0 *** |
---|
472 | AcpiOsTableOverride Ex:FFCD80C0 New:FFCFFFBC SIG:[DSDT] |
---|
473 | *** AcpiLoadTables Status = 0 *** |
---|
474 | Table [DSDT] |
---|
475 | Table [FACS] |
---|
476 | Table [FACP] |
---|
477 | Table [HPET] |
---|
478 | Table [MCFG] |
---|
479 | Table [APIC] |
---|
480 | Local APIC address: FEE00000h |
---|
481 | System also has 8259 |
---|
482 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
483 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
484 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable |
---|
485 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
---|
486 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
487 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
488 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level |
---|
489 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
490 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
491 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
492 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
493 | Size of FACDT 244 |
---|
494 | Type of computer - Unspecified |
---|
495 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
496 | System port address of the SMI Command Port 0xB0 |
---|
497 | The value to write to SMI_CMD to disable SMI 0xA1 |
---|
498 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
---|
499 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
500 | System port address of the PM1a Event Register Block 4000 |
---|
501 | System port address of the PM1b Event Register Block 0 |
---|
502 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
503 | System port address of the PM1a Control Register Block 4004 |
---|
504 | System port address of the PM1b Control Register Block 0 |
---|
505 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
506 | System port address of the PM2 Control Register Block 4050 |
---|
507 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
508 | System port address of the Power Management Timer Control Register Block 4008 |
---|
509 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
510 | System port address of General-Purpose Event 0 Register Block 4020 |
---|
511 | System port address of General-Purpose Event 1 Register Block 0 |
---|
512 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
513 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
514 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
515 | GPE enable register: 0: 0: 0: 0 |
---|
516 | GPE status register: 8: 41: 0: C4 |
---|
517 | The system does not support a C2 state. 65 |
---|
518 | The system does not support a C3 state 3E9 |
---|
519 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
520 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
521 | IA-PC Boot Architecture Flags 0x0 |
---|
522 | Fixed feature flags 1AD |
---|
523 | The reset register: |
---|
524 | Type of address space - System Memory |
---|
525 | Register Bit Width 0 |
---|
526 | Register Bit Offset 0 |
---|
527 | Access size 0 |
---|
528 | Address 0 |
---|
529 | The value to write to the RESET_REG port to reset the system 0 |
---|
530 | ***** Throttl Width 0 Offset 1 |
---|
531 | AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB |
---|
532 | ** AcpiEnableSubsystem Status = 0 |
---|
533 | AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
---|
534 | ** Scan EC Status = 0 |
---|
535 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
536 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
537 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
538 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
539 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
540 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
541 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
542 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
543 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
544 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
545 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
546 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
547 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
548 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
549 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
550 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
551 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
552 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
553 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
554 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
555 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
556 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
557 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
558 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
559 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
560 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
561 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
562 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
563 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
564 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
565 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
566 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
567 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
568 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
569 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
570 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
571 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
572 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
573 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
574 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
575 | ** AcpiInitializeObjects mask:0 Status = 0 |
---|
576 | Processor [C000] |
---|
577 | Processor [C001] |
---|
578 | Processor [C002] |
---|
579 | Processor [C003] |
---|
580 | Status 0x0 0 |
---|
581 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
582 | Status Evaluate Processor 0x0 AE_OK |
---|
583 | Usable:4 Counter:0 |
---|
584 | CPU id to N:0 |
---|
585 | ProcId: 0x0 |
---|
586 | P_BLK: 0x4010 |
---|
587 | P_BLK len: 0x6 |
---|
588 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
589 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
590 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
591 | Status Evaluate Processor 0x0 AE_OK |
---|
592 | Usable:4 Counter:1 |
---|
593 | CPU id to N:1 |
---|
594 | ProcId: 0x1 |
---|
595 | P_BLK: 0x4010 |
---|
596 | P_BLK len: 0x6 |
---|
597 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
598 | CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
599 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
600 | Status Evaluate Processor 0x0 AE_OK |
---|
601 | Usable:4 Counter:2 |
---|
602 | CPU id to N:2 |
---|
603 | ProcId: 0x2 |
---|
604 | P_BLK: 0x4010 |
---|
605 | P_BLK len: 0x6 |
---|
606 | CPU2 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
607 | CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
608 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
609 | Status Evaluate Processor 0x0 AE_OK |
---|
610 | Usable:4 Counter:3 |
---|
611 | CPU id to N:3 |
---|
612 | ProcId: 0x3 |
---|
613 | P_BLK: 0x4010 |
---|
614 | P_BLK len: 0x6 |
---|
615 | CPU3 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
616 | CPU3 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
617 | ** AcpiInstall Power Device Status = 0 |
---|
618 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
---|
619 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
---|
620 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
621 | ** AcpiInstall PMTimer Device Status = 0 |
---|
622 | ** Total use:183872 unuse:15488 count:3412 ** |
---|
623 | Get GpeHdl Status = 0 - AE_OK |
---|
624 | Event [_L04] |
---|
625 | Install GPE0x4 Status 0x0 |
---|
626 | Event [_L18] |
---|
627 | Install GPE0x18 Status 0x0 |
---|
628 | Event [_L03] |
---|
629 | Install GPE0x3 Status 0x0 |
---|
630 | Event [_L0B] |
---|
631 | Install GPE0xB Status 0x0 |
---|
632 | Event [_L1B] |
---|
633 | Install GPE0x1B Status 0x0 |
---|
634 | EndScan GPE Status 0 |
---|
635 | ===== Info ======== |
---|
636 | Int Level 9 |
---|
637 | In Xrupt F92C3D90 in arg F92C3D90 |
---|
638 | Node |
---|
639 | Name [_GPE] |
---|
640 | Flags: 0 |
---|
641 | Reg count 4 |
---|
642 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
643 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
644 | GPE0 Status:4020 Enable:4024 EnableWake:18 EnableRun:0 BaseGPENumber:0 |
---|
645 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
646 | GPE1 Status:4021 Enable:4025 EnableWake:8 EnableRun:0 BaseGPENumber:8 |
---|
647 | GPE2 Status:4022 Enable:4026 EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
648 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
649 | GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
650 | GPE3 Status:4023 Enable:4027 EnableWake:9 EnableRun:0 BaseGPENumber:18 |
---|
651 | =========== Status 0x0 0 |
---|
652 | PSDFree: at 0xF9800000 success! |
---|
653 | FindPCIDevice |
---|
654 | FindPCIDevice |
---|
655 | FindPCIDevice |
---|
656 | APM: PSD find success. PSD Ftable:F981017C |
---|
657 | APM:Max C state 0 |
---|
658 | Register Notify 1st FFCD528D |
---|
659 | Gradd: PSD find success. PSD Ftable:F981017C |
---|
660 | ******** Event tread *************** |
---|
661 | AllocateSuspendMemory s_cpu:0 |
---|
662 | Alloc s_cpu OK CPU0 2304 bytes at 0 |
---|
663 | AllocSuspend: CPU0 CR3:211000 |
---|
664 | AllocSuspend: CPU1 CR3:F05000 |
---|
665 | AllocSuspend: CPU2 CR3:EFC000 |
---|
666 | AllocSuspend: CPU3 CR3:EF4000 |
---|
667 | Status 1Mb alloc 0 |
---|
668 | 24 Feb 06:44:59 acpica$ log is reading |
---|
669 | APM: Setting suspend state:1 |
---|
670 | 24 Feb 06:48:05 acpica$ log is reading |
---|
671 | KEE Version 0x10000 |
---|
672 | |
---|
673 | PSD_install options:" /!NOD /SMP" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
---|
674 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
675 | New Stack = FFD00000 Size:0x8000 |
---|
676 | AcpiOsInitialize ALLOC size 65536 at 0xF92D0000 |
---|
677 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
678 | AcpiOsCreateLock F98171A0 |
---|
679 | AcpiOsCreateLock F981CB64 |
---|
680 | AcpiOsPredefinedOverride: "_REV" |
---|
681 | AcpiOsPredefinedOverride: "_OS_" |
---|
682 | AcpiOsPredefinedOverride: override to eComStation |
---|
683 | AcpiOsPredefinedOverride: "_GL_" |
---|
684 | AcpiOsPredefinedOverride: "_OSI" |
---|
685 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
686 | ACPI: RSDP @ 0xF7360/0x14 (v0 GBT ) |
---|
687 | ACPI: RSDT @ 0xCFEE3000/0x34 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
688 | ACPI: FACP @ 0xCFEE3040/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
689 | ACPI: DSDT @ 0xCFEE30C0/0x72C9 (v1 GBT GBTUACPI 0x1000 MSFT 0x3000000) |
---|
690 | ACPI: FACS @ 0xCFEE0000/0x40 |
---|
691 | ACPI: HPET @ 0xCFEEA480/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) |
---|
692 | ACPI: MCFG @ 0xCFEEA4C0/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
693 | ACPI: APIC @ 0xCFEEA3C0/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
694 | *** AcpiInitializeTables Status = 0 *** |
---|
695 | AcpiOsTableOverride Ex:FFCD80C0 New:FFCFFFBC SIG:[DSDT] |
---|
696 | *** AcpiLoadTables Status = 0 *** |
---|
697 | Table [DSDT] |
---|
698 | Table [FACS] |
---|
699 | Table [FACP] |
---|
700 | Table [HPET] |
---|
701 | Table [MCFG] |
---|
702 | Table [APIC] |
---|
703 | Local APIC address: FEE00000h |
---|
704 | System also has 8259 |
---|
705 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
706 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
707 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable |
---|
708 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
---|
709 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
710 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
711 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level |
---|
712 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
713 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
714 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
715 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
716 | Size of FACDT 244 |
---|
717 | Type of computer - Unspecified |
---|
718 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
719 | System port address of the SMI Command Port 0xB0 |
---|
720 | The value to write to SMI_CMD to disable SMI 0xA1 |
---|
721 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
---|
722 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
723 | System port address of the PM1a Event Register Block 4000 |
---|
724 | System port address of the PM1b Event Register Block 0 |
---|
725 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
726 | System port address of the PM1a Control Register Block 4004 |
---|
727 | System port address of the PM1b Control Register Block 0 |
---|
728 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
729 | System port address of the PM2 Control Register Block 4050 |
---|
730 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
731 | System port address of the Power Management Timer Control Register Block 4008 |
---|
732 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
733 | System port address of General-Purpose Event 0 Register Block 4020 |
---|
734 | System port address of General-Purpose Event 1 Register Block 0 |
---|
735 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
736 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
737 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
738 | GPE enable register: 0: 0: 0: 0 |
---|
739 | GPE status register: 8: 1: 0: C4 |
---|
740 | The system does not support a C2 state. 65 |
---|
741 | The system does not support a C3 state 3E9 |
---|
742 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
743 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
744 | IA-PC Boot Architecture Flags 0x0 |
---|
745 | Fixed feature flags 1AD |
---|
746 | The reset register: |
---|
747 | Type of address space - System Memory |
---|
748 | Register Bit Width 0 |
---|
749 | Register Bit Offset 0 |
---|
750 | Access size 0 |
---|
751 | Address 0 |
---|
752 | The value to write to the RESET_REG port to reset the system 0 |
---|
753 | ***** Throttl Width 0 Offset 1 |
---|
754 | AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB |
---|
755 | ** AcpiEnableSubsystem Status = 0 |
---|
756 | AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
---|
757 | ** Scan EC Status = 0 |
---|
758 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
759 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
760 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
761 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
762 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
763 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
764 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
765 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
766 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
767 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
768 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
769 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
770 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
771 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
772 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
773 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
774 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
775 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
776 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
777 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
778 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
779 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
780 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
781 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
782 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
783 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
784 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
785 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
786 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
787 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
788 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
789 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
790 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
791 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
792 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
793 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
794 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
795 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
796 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
797 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
798 | ** AcpiInitializeObjects mask:0 Status = 0 |
---|
799 | Processor [C000] |
---|
800 | Processor [C001] |
---|
801 | Processor [C002] |
---|
802 | Processor [C003] |
---|
803 | Status 0x0 0 |
---|
804 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
805 | Status Evaluate Processor 0x0 AE_OK |
---|
806 | Usable:4 Counter:0 |
---|
807 | CPU id to N:0 |
---|
808 | ProcId: 0x0 |
---|
809 | P_BLK: 0x4010 |
---|
810 | P_BLK len: 0x6 |
---|
811 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
812 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
813 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
814 | Status Evaluate Processor 0x0 AE_OK |
---|
815 | Usable:4 Counter:1 |
---|
816 | CPU id to N:1 |
---|
817 | ProcId: 0x1 |
---|
818 | P_BLK: 0x4010 |
---|
819 | P_BLK len: 0x6 |
---|
820 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
821 | CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
822 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
823 | Status Evaluate Processor 0x0 AE_OK |
---|
824 | Usable:4 Counter:2 |
---|
825 | CPU id to N:2 |
---|
826 | ProcId: 0x2 |
---|
827 | P_BLK: 0x4010 |
---|
828 | P_BLK len: 0x6 |
---|
829 | CPU2 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
830 | CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
831 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
832 | Status Evaluate Processor 0x0 AE_OK |
---|
833 | Usable:4 Counter:3 |
---|
834 | CPU id to N:3 |
---|
835 | ProcId: 0x3 |
---|
836 | P_BLK: 0x4010 |
---|
837 | P_BLK len: 0x6 |
---|
838 | CPU3 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
839 | CPU3 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
840 | ** AcpiInstall Power Device Status = 0 |
---|
841 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
---|
842 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
---|
843 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
844 | ** AcpiInstall PMTimer Device Status = 0 |
---|
845 | ** Total use:183872 unuse:15488 count:3412 ** |
---|
846 | Get GpeHdl Status = 0 - AE_OK |
---|
847 | Event [_L04] |
---|
848 | Install GPE0x4 Status 0x0 |
---|
849 | Event [_L18] |
---|
850 | Install GPE0x18 Status 0x0 |
---|
851 | Event [_L03] |
---|
852 | Install GPE0x3 Status 0x0 |
---|
853 | Event [_L0B] |
---|
854 | Install GPE0xB Status 0x0 |
---|
855 | Event [_L1B] |
---|
856 | Install GPE0x1B Status 0x0 |
---|
857 | EndScan GPE Status 0 |
---|
858 | ===== Info ======== |
---|
859 | Int Level 9 |
---|
860 | In Xrupt F92C3D90 in arg F92C3D90 |
---|
861 | Node |
---|
862 | Name [_GPE] |
---|
863 | Flags: 0 |
---|
864 | Reg count 4 |
---|
865 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
866 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
867 | GPE0 Status:4020 Enable:4024 EnableWake:18 EnableRun:0 BaseGPENumber:0 |
---|
868 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
869 | GPE1 Status:4021 Enable:4025 EnableWake:8 EnableRun:0 BaseGPENumber:8 |
---|
870 | GPE2 Status:4022 Enable:4026 EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
871 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
872 | GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
873 | GPE3 Status:4023 Enable:4027 EnableWake:9 EnableRun:0 BaseGPENumber:18 |
---|
874 | =========== Status 0x0 0 |
---|
875 | PSDFree: at 0xF9800000 success! |
---|
876 | FindPCIDevice |
---|
877 | FindPCIDevice |
---|
878 | FindPCIDevice |
---|
879 | APM: PSD find success. PSD Ftable:F981017C |
---|
880 | APM:Max C state 0 |
---|
881 | Register Notify 1st FFCD528D |
---|
882 | Gradd: PSD find success. PSD Ftable:F981017C |
---|
883 | ******** Event tread *************** |
---|
884 | AllocateSuspendMemory s_cpu:0 |
---|
885 | Alloc s_cpu OK CPU0 2304 bytes at 0 |
---|
886 | AllocSuspend: CPU0 CR3:211000 |
---|
887 | AllocSuspend: CPU1 CR3:F05000 |
---|
888 | AllocSuspend: CPU2 CR3:EFC000 |
---|
889 | AllocSuspend: CPU3 CR3:EF4000 |
---|
890 | Status 1Mb alloc 0 |
---|
891 | 24 Feb 06:48:05 acpica$ log is reading |
---|
892 | APM: Setting suspend state:1 |
---|
893 | 24 Feb 07:00:28 acpica$ log is reading |
---|
894 | KEE Version 0x10000 |
---|
895 | |
---|
896 | PSD_install options:" /!NOD /SMP" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19 |
---|
897 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
898 | New Stack = FFD00000 Size:0x8000 |
---|
899 | AcpiOsInitialize ALLOC size 65536 at 0xF92D0000 |
---|
900 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
901 | AcpiOsCreateLock F98171A0 |
---|
902 | AcpiOsCreateLock F981CB64 |
---|
903 | AcpiOsPredefinedOverride: "_REV" |
---|
904 | AcpiOsPredefinedOverride: "_OS_" |
---|
905 | AcpiOsPredefinedOverride: override to eComStation |
---|
906 | AcpiOsPredefinedOverride: "_GL_" |
---|
907 | AcpiOsPredefinedOverride: "_OSI" |
---|
908 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
909 | ACPI: RSDP @ 0xF7360/0x14 (v0 GBT ) |
---|
910 | ACPI: RSDT @ 0xCFEE3000/0x34 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
911 | ACPI: FACP @ 0xCFEE3040/0x74 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
912 | ACPI: DSDT @ 0xCFEE30C0/0x72C9 (v1 GBT GBTUACPI 0x1000 MSFT 0x3000000) |
---|
913 | ACPI: FACS @ 0xCFEE0000/0x40 |
---|
914 | ACPI: HPET @ 0xCFEEA480/0x38 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x98) |
---|
915 | ACPI: MCFG @ 0xCFEEA4C0/0x3C (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
916 | ACPI: APIC @ 0xCFEEA3C0/0x84 (v1 GBT GBTUACPI 0x42302E31 GBTU 0x1010101) |
---|
917 | *** AcpiInitializeTables Status = 0 *** |
---|
918 | AcpiOsTableOverride Ex:FFCD80C0 New:FFCFFFBC SIG:[DSDT] |
---|
919 | *** AcpiLoadTables Status = 0 *** |
---|
920 | Table [DSDT] |
---|
921 | Table [FACS] |
---|
922 | Table [FACP] |
---|
923 | Table [HPET] |
---|
924 | Table [MCFG] |
---|
925 | Table [APIC] |
---|
926 | Local APIC address: FEE00000h |
---|
927 | System also has 8259 |
---|
928 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
929 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
930 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable |
---|
931 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
---|
932 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
---|
933 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
934 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level |
---|
935 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
936 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
937 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
938 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: Bus spec Trigger by: Bus spec |
---|
939 | Size of FACDT 244 |
---|
940 | Type of computer - Unspecified |
---|
941 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
942 | System port address of the SMI Command Port 0xB0 |
---|
943 | The value to write to SMI_CMD to disable SMI 0xA1 |
---|
944 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
---|
945 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
946 | System port address of the PM1a Event Register Block 4000 |
---|
947 | System port address of the PM1b Event Register Block 0 |
---|
948 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
949 | System port address of the PM1a Control Register Block 4004 |
---|
950 | System port address of the PM1b Control Register Block 0 |
---|
951 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
952 | System port address of the PM2 Control Register Block 4050 |
---|
953 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
954 | System port address of the Power Management Timer Control Register Block 4008 |
---|
955 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
956 | System port address of General-Purpose Event 0 Register Block 4020 |
---|
957 | System port address of General-Purpose Event 1 Register Block 0 |
---|
958 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
959 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
960 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
961 | GPE enable register: 0: 0: 0: 0 |
---|
962 | GPE status register: 8: 41: 0: C4 |
---|
963 | The system does not support a C2 state. 65 |
---|
964 | The system does not support a C3 state 3E9 |
---|
965 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
966 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
967 | IA-PC Boot Architecture Flags 0x0 |
---|
968 | Fixed feature flags 1AD |
---|
969 | The reset register: |
---|
970 | Type of address space - System Memory |
---|
971 | Register Bit Width 0 |
---|
972 | Register Bit Offset 0 |
---|
973 | Access size 0 |
---|
974 | Address 0 |
---|
975 | The value to write to the RESET_REG port to reset the system 0 |
---|
976 | ***** Throttl Width 0 Offset 1 |
---|
977 | AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB |
---|
978 | ** AcpiEnableSubsystem Status = 0 |
---|
979 | AcpiOsDerivePCIID([PCI0] ,[SACS],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
---|
980 | ** Scan EC Status = 0 |
---|
981 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
982 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
983 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
984 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
985 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
986 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
987 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
988 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
989 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
990 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
991 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
992 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
993 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
994 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
995 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
996 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
997 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
998 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
999 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1000 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1001 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
1002 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1003 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1004 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
1005 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1006 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
1007 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
1008 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1009 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
1010 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
1011 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1012 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1013 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
1014 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1015 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1016 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
1017 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
---|
1018 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
---|
1019 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
---|
1020 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUND |
---|
1021 | ** AcpiInitializeObjects mask:0 Status = 0 |
---|
1022 | Processor [C000] |
---|
1023 | Processor [C001] |
---|
1024 | Processor [C002] |
---|
1025 | Processor [C003] |
---|
1026 | Status 0x0 0 |
---|
1027 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
1028 | Status Evaluate Processor 0x0 AE_OK |
---|
1029 | Usable:4 Counter:0 |
---|
1030 | CPU id to N:0 |
---|
1031 | ProcId: 0x0 |
---|
1032 | P_BLK: 0x4010 |
---|
1033 | P_BLK len: 0x6 |
---|
1034 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
1035 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
1036 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
1037 | Status Evaluate Processor 0x0 AE_OK |
---|
1038 | Usable:4 Counter:1 |
---|
1039 | CPU id to N:1 |
---|
1040 | ProcId: 0x1 |
---|
1041 | P_BLK: 0x4010 |
---|
1042 | P_BLK len: 0x6 |
---|
1043 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
1044 | CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
1045 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
1046 | Status Evaluate Processor 0x0 AE_OK |
---|
1047 | Usable:4 Counter:2 |
---|
1048 | CPU id to N:2 |
---|
1049 | ProcId: 0x2 |
---|
1050 | P_BLK: 0x4010 |
---|
1051 | P_BLK len: 0x6 |
---|
1052 | CPU2 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
1053 | CPU2 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
1054 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
---|
1055 | Status Evaluate Processor 0x0 AE_OK |
---|
1056 | Usable:4 Counter:3 |
---|
1057 | CPU id to N:3 |
---|
1058 | ProcId: 0x3 |
---|
1059 | P_BLK: 0x4010 |
---|
1060 | P_BLK len: 0x6 |
---|
1061 | CPU3 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
1062 | CPU3 Status Evaluate _CST 0x5 AE_NOT_FOUND |
---|
1063 | ** AcpiInstall Power Device Status = 0 |
---|
1064 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031] |
---|
1065 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031] |
---|
1066 | ** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE |
---|
1067 | ** AcpiInstall PMTimer Device Status = 0 |
---|
1068 | ** Total use:183872 unuse:15488 count:3412 ** |
---|
1069 | Get GpeHdl Status = 0 - AE_OK |
---|
1070 | Event [_L04] |
---|
1071 | Install GPE0x4 Status 0x0 |
---|
1072 | Event [_L18] |
---|
1073 | Install GPE0x18 Status 0x0 |
---|
1074 | Event [_L03] |
---|
1075 | Install GPE0x3 Status 0x0 |
---|
1076 | Event [_L0B] |
---|
1077 | Install GPE0xB Status 0x0 |
---|
1078 | Event [_L1B] |
---|
1079 | Install GPE0x1B Status 0x0 |
---|
1080 | EndScan GPE Status 0 |
---|
1081 | ===== Info ======== |
---|
1082 | Int Level 9 |
---|
1083 | In Xrupt F92C3D90 in arg F92C3D90 |
---|
1084 | Node |
---|
1085 | Name [_GPE] |
---|
1086 | Flags: 0 |
---|
1087 | Reg count 4 |
---|
1088 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
1089 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
1090 | GPE0 Status:4020 Enable:4024 EnableWake:18 EnableRun:0 BaseGPENumber:0 |
---|
1091 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
1092 | GPE1 Status:4021 Enable:4025 EnableWake:8 EnableRun:0 BaseGPENumber:8 |
---|
1093 | GPE2 Status:4022 Enable:4026 EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
1094 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
1095 | GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
1096 | GPE3 Status:4023 Enable:4027 EnableWake:9 EnableRun:0 BaseGPENumber:18 |
---|
1097 | =========== Status 0x0 0 |
---|
1098 | PSDFree: at 0xF9800000 success! |
---|
1099 | FindPCIDevice |
---|
1100 | FindPCIDevice |
---|
1101 | FindPCIDevice |
---|
1102 | APM: PSD find success. PSD Ftable:F981017C |
---|
1103 | APM:Max C state 0 |
---|
1104 | Register Notify 1st FFCD528D |
---|
1105 | Gradd: PSD find success. PSD Ftable:F981017C |
---|
1106 | ******** Event tread *************** |
---|
1107 | AllocateSuspendMemory s_cpu:0 |
---|
1108 | Alloc s_cpu OK CPU0 2304 bytes at 0 |
---|
1109 | AllocSuspend: CPU0 CR3:211000 |
---|
1110 | AllocSuspend: CPU1 CR3:F05000 |
---|
1111 | AllocSuspend: CPU2 CR3:EFC000 |
---|
1112 | AllocSuspend: CPU3 CR3:EF4000 |
---|
1113 | Status 1Mb alloc 0 |
---|
1114 | 24 Feb 07:00:28 acpica$ log is reading |
---|
1115 | APM: Setting suspend state:1 |
---|