Ticket #375: acpi_AC.log

File acpi_AC.log, 13.6 KB (added by dedr79, 16 years ago)
Line 
1KEE Version 0x10000
2@#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
3MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
4SS Selector fault
5AcpiOsInitialize ALLOC size 65536 at 0xF9603000
6AcpiOsInitialize MapMem size 4096 at 0xFFEA2000
7AcpiOsCreateLock F97671A0
8AcpiOsCreateLock F976CB64
9AcpiOsPredefinedOverride: "_REV"
10AcpiOsPredefinedOverride: "_OS_"
11AcpiOsPredefinedOverride: override to eComStation
12AcpiOsPredefinedOverride: "_GL_"
13AcpiOsPredefinedOverride: "_OSI"
14*** AcpiInitializeSubsystem Status = 0 ***
15ACPI: RSDP @ 0xF6C00/0x24 (v2 IBM )
16ACPI: XSDT @ 0x5FED6FE7/0x5C (v1 IBM TP-1Y 0x1290 LTP 0x0)
17ACPI: FACP @ 0x5FED7100/0xF4 (v3 IBM TP-1Y 0x1290 IBM 0x1)
18ACPI Warning (tbfadt-543): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20081031]
19ACPI: DSDT @ 0x5FED72E7/0xDB15 (v1 IBM TP-1Y 0x1290 MSFT 0x100000E)
20ACPI: FACS @ 0x5FEF6000/0x40
21ACPI: SSDT @ 0x5FED72B4/0x33 (v1 IBM TP-1Y 0x1290 MSFT 0x100000E)
22ACPI: ECDT @ 0x5FEE4DFC/0x52 (v1 IBM TP-1Y 0x1290 IBM 0x1)
23ACPI: TCPA @ 0x5FEE4E4E/0x32 (v1 IBM TP-1Y 0x1290 PTL 0x1)
24ACPI: APIC @ 0x5FEE4E80/0x5A (v1 IBM TP-1Y 0x1290 IBM 0x1)
25ACPI: MCFG @ 0x5FEE4EDA/0x3C (v1 IBM TP-1Y 0x1290 IBM 0x1)
26ACPI: BOOT @ 0x5FEE4FD8/0x28 (v1 IBM TP-1Y 0x1290 LTP 0x1)
27*** AcpiInitializeTables Status = 0 ***
28AcpiOsTableOverride Ex:FD0552E7 New:FFDEADA4 SIG:[DSDT]
29*** AcpiLoadTables Status = 0 ***
30Table [DSDT]
31Table [FACS]
32Table [FACP]
33Table [SSDT]
34Table [ECDT]
35EC Control: 66:1:8:0:0
36EC Data: 62:1:8:0:0
37UID: 0
38GPE bit: 1C
39Name in ACPI:\_SB.PCI0.LPC.EC
40Status GetHandle: 0 - AE_OK
41Table [TCPA]
42Table [APIC]
43Local APIC address: FEE00000h
44System also has 8259
45APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
46APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
47APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
48APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
49APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
50Table [MCFG]
51Table [BOOT]
52Size of FACDT 244
53Type of computer - Mobile
54System vector the SCI interrupt is wired to in 8259 mode. 9
55System port address of the SMI Command Port 0xB2
56The value to write to SMI_CMD to disable SMI 0xF0
57The value to write to SMI_CMD to re-enable SMI 0xF1
58The value to write to SMI_CMD to enter the S4BIOS state 0x0
59The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3
60System port address of the PM1a Event Register Block 1000
61System port address of the PM1b Event Register Block 0
62Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
63System port address of the PM1a Control Register Block 1004
64System port address of the PM1b Control Register Block 0
65Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
66System port address of the PM2 Control Register Block 1020
67Number of bytes decoded by PM2_CNT_BLK 1
68System port address of the Power Management Timer Control Register Block 1008
69Number of bytes decoded by PM_TMR_BLK (=4) 4
70System port address of General-Purpose Event 0 Register Block 1028
71System port address of General-Purpose Event 1 Register Block 0
72Number of bytes decoded by GPE0_BLK 0x8
73Number of bytes decoded by GPE1_BLK 0x0
74Offset within the ACPI general-purpose event model where GPE1 based events start 0
75GPE enable register: 0: 0: 0: 10
76GPE status register: 0: 0: FF: CE
77The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4
78The worst-case hardware latency to enter and exit a C2 state 1 us
79The worst-case hardware latency to enter and exit a C3 state 85 us
80The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
81The bit width of the processor's duty cycle setting value in the P_CNT register 3
82The RTC CMOS RAM index to the day-of-month alarm value 13
83The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
84IA-PC Boot Architecture Flags 0x3
85Fixed feature flags 2AD
86The reset register:
87Type of address space - System I/O
88Register Bit Width 8
89Register Bit Offset 0
90Access size 0
91Address 3321
92The value to write to the RESET_REG port to reset the system 6
93***** Throttl Width 3 Offset 1
94AcpiOsInstallIntterrupHandler IRQ9 handler F9793CDB
95** AcpiEnableSubsystem Status = 0
96** AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9761AAC - AE_OK
97Install GPE Status 0
98GpeSetType Status = 0 - AE_OK
99EC[0] GPE1C GpeEnable Status = 0 - AE_OK
100AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
101AcpiEcSetup handle F9609F78 Function 0 Count 1
102Emm Setup St:8
103AcpiWaitIBF rc=640 IBF:0
104AcpiWaitOBF rc=640 OBF:0
105AcpiWaitIBF rc=640 IBF:0
106AcpiWaitIBF rc=640 IBF:0
107AcpiWaitIBF rc=640 IBF:0
108AcpiWaitOBF rc=640 OBF:0
109AcpiWaitIBF rc=640 IBF:0
110AcpiWaitOBF rc=640 OBF:0
111AcpiWaitIBF rc=640 IBF:0
112AcpiWaitIBF rc=640 IBF:0
113AcpiWaitIBF rc=640 IBF:0
114AcpiWaitOBF rc=640 OBF:0
115AcpiWaitIBF rc=640 IBF:0
116AcpiWaitIBF rc=640 IBF:0
117AcpiWaitIBF rc=640 IBF:0
118AcpiWaitOBF rc=640 OBF:0
119AcpiWaitIBF rc=640 IBF:0
120AcpiWaitIBF rc=640 IBF:0
121AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7
122** AcpiInitializeObjects mask:0 Status = 0
123Processor [CPU_]
124Status 0x0 0
125Status Evaluate Processor PDC 0x0 AE_OK
126Status Evaluate Processor 0x0 AE_OK
127Status C 0x0 AE_OK
128Usable:1 Counter:0
129 CPU id to N:0
130 ProcId: 0x1
131 P_BLK: 0x1010
132 P_BLK len: 0x6
133CPU0 Status Evaluate _PCT 0x0 AE_OK
134 Perf control: 0xB2
135 Perf status: 0xB3
136AcpiWaitIBF rc=640 IBF:0
137AcpiWaitOBF rc=640 OBF:0
138CPU0 Status Evaluate _CST 0x0 AE_OK
139_CST has 3 Cstates
140 C1State control: 0x0
141 Latency: 1 uSec
142 Power consuption: 1000 mWatt
143 C2State control: 0x1014
144 Latency: 1 uSec
145 Power consuption: 500 mWatt
146 C3State control: 0x1015
147 Latency: 85 uSec
148 Power consuption: 250 mWatt
149AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
150AcpiWaitIBF rc=640 IBF:0
151AcpiWaitOBF rc=640 OBF:0
152AcpiWaitIBF rc=640 IBF:0
153AcpiWaitOBF rc=640 OBF:0
154Finding:0 bridges
1550:0.0 Class:600 Hdr:0 Bridge H->0
1560:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1570:28.0 Class:604 Hdr:81 Bridge 0->2 Bridge
1580:28.2 Class:604 Hdr:81 Bridge 0->3..10 Bridge
1590:29.0 Class:C03 Hdr:80
1600:29.1 Class:C03 Hdr:0
1610:29.2 Class:C03 Hdr:0
1620:29.3 Class:C03 Hdr:0
1630:29.7 Class:C03 Hdr:0
1640:30.0 Class:604 Hdr:81 Bridge 0->11..14 Bridge
1650:30.2 Class:401 Hdr:0
1660:30.3 Class:703 Hdr:0
1670:31.0 Class:601 Hdr:80
1680:31.2 Class:101 Hdr:0
1690:31.3 Class:C05 Hdr:0
1701:0.0 Class:300 Hdr:0
1712:0.0 Class:200 Hdr:0
17211:0.0 Class:607 Hdr:82 Bridge 11->12..14 CardBus
17311:2.0 Class:280 Hdr:0
174PCI Bus scan: 15 PCI buses found.
175Scan ACPI tree for PCI functions
1760:0.0 'PCI0' (F9605D28)
1770:31.0 'LPC_' (F9605D50)
1780:1.0 'AGP_' (F960F8C8)
1791:0.0 'VID_' (F960FC70)
1800:28.0 'EXP0' (F96108A8)
1810:28.1 'EXP1' (F9610B08)
1820:28.2 'EXP2' (F9610D68)
1833:0.0 'EXUP' (F9611090)
1840:28.3 'EXP3' (F9611140)
1850:30.0 'PCI1' (F96113A0)
18611:0.0 'CDBS' (F9611518)
18711:3.0 'DOCK' (F96115F0)
1880:31.2 'IDE0' (F95F4028)
1890:31.3 'SMBU' (F95F53B0)
1900:29.0 'USB0' (F95F5450)
1910:29.1 'USB1' (F95F57B0)
1920:29.2 'USB2' (F95F5A10)
1930:29.3 'USB3' (F95F5A88)
1940:29.7 'USB7' (F95F5D10)
1950:30.2 'AC9A' (F95F60E8)
1960:30.3 'AC9M' (F95F6188)
197Bridges found:
1980:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9605D28) _PRT
1990:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F960F8C8) _PRT
2000:28.0 class:604 type: 1 Bus 0->2 ACPI: 'EXP0' (F96108A8) _PRT
2010:28.2 class:604 type: 1 Bus 0->3 ACPI: 'EXP2' (F9610D68) _PRT
2020:30.0 class:604 type: 1 Bus 0->11 ACPI: 'PCI1' (F96113A0) _PRT
20311:0.0 class:607 type: 2 Bus 11->12 ACPI: 'CDBS' (F9611518)
204IRQLinks found:
2050: 'LNKA' (F96046E0) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 11:0.0 2:0.0 1:0.0 0:29.0
206 A[]
2071: 'LNKE' (F9605000) P[]
208 A[]
2092: 'LNKF' (F9605248) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 11:2.0
210 A[]
2113: 'LNKG' (F9605490) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:30.2
212 A[]
2134: 'LNKH' (F96056D8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:31.3 0:30.3
214 A[]
2155: 'LNKB' (F9604928) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.1
216 A[]
2176: 'LNKC' (F9604B70) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.2
218 A[]
2197: 'LNKD' (F9604DB8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7 0:29.3
220 A[]
221PCI devices found:
2220:0.0 8086:2590 'PCI0'
2230:1.0 8086:2591 'AGP_'
2240:28.0 8086:2660 'EXP0'
2250:28.2 8086:2664 'EXP2'
2260:29.0 8086:2658 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
2270:29.1 8086:2659 'USB1' IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2280:29.2 8086:265A 'USB2' IRQs: PCI:11 PIC:'LNKC':11 APIC:18
2290:29.3 8086:265B 'USB3' IRQs: PCI:11 PIC:'LNKD':11 APIC:19
2300:29.7 8086:265C 'USB7' IRQs: PCI:11 PIC:'LNKD':11 APIC:19
2310:30.0 8086:2448 'PCI1'
2320:30.2 8086:266E 'AC9A' IRQs: PCI:11 PIC:'LNKG':11 APIC:22
2330:30.3 8086:266D 'AC9M' IRQs: PCI:11 PIC:'LNKH':11 APIC:23
2340:31.0 8086:2641 'LPC_'
2350:31.2 8086:2653 'IDE0'
2360:31.3 8086:266A 'SMBU' IRQs: PCI:11 PIC:'LNKH':11 APIC:23
2371:0.0 1002:5460 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI
2382:0.0 14E4:167D IRQs: PCI:11 PIC:'LNKA':11 APIC:16 MSI
23911:0.0 1180:476 'CDBS' IRQs: PCI:11 PIC:'LNKA':11 APIC:16
24011:2.0 8086:4220 IRQs: PCI:11 PIC:'LNKF':11 APIC:21
241Bus detected - 14
242** AcpiInstall Power Device Status = 0
243ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
244ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
245** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
246** AcpiInstall PMTimer Device Status = 0
247** Total use:237704 unuse:10064 count:4627 **
248Get GpeHdl Status = 0 - AE_OK
249Event [_L18]
250Install GPE0x18 Status 0x0
251Event [_L09]
252Install GPE0x9 Status 0x0
253Event [_L01]
254Install GPE0x1 Status 0x0
255EndScan GPE Status 0
256===== Info ========
257Int Level 9
258In Xrupt F95EAD80 in arg F95EAD80
259 Node
260Name [_GPE]
261Flags: 0
262Reg count 4
263GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
264GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
265GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
266GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
267GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:2 BaseGPENumber:0
268GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
269GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
270GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
271GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
272GPE1 Status:1029 Enable:102D EnableWake:6A EnableRun:0 BaseGPENumber:8
273GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
274GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0
275GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
276GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
277GPE3 Status:102B Enable:102F EnableWake:21 EnableRun:10 BaseGPENumber:18
278=========== Status 0x0 0
279APM: PSD find success. PSD Ftable:F976017C
280APM:Max C state 0
281Register Notify 1st FFDFC28D
282FindPCIDevice
283 Need: B:0 D:1F F:2
284Check - IRQ AcpiWaitOBF Ctl=9 OBF=0
285EC arm "_Q75" N:0 Cur:0
286Uniaud32: PSD find success. PSD Ftable:F976017C
287FindPCIDevice
288 Need: B:0 D:1E F:0
289APM: Found Smart Battery "BAT0"
290APM: Found Smart Battery "BAT1"
291APM: Unknown design capacity
292APM: Found AC "AC__"
293******** Event tread ***************
294AllocateSuspendMemory s_cpu:0
295Alloc s_cpu OK CPU0 2304 bytes at 0
296AllocSuspend: CPU0 CR3:200000
297Status 1Mb alloc 0
298======= Execute EC 0 queue ===========
299AcpiOsSleep 1 ms
300AcpiOsSleep 1 ms
301APM: Unsetting suspend state
302Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
303EC arm "_Q14" N:1 Cur:1
304======= Execute EC 1 queue ===========
305Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
306EC arm "_Q14" N:2 Cur:2
307======= Execute EC 2 queue ===========
308Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
309EC arm "_Q14" N:3 Cur:3
310======= Execute EC 3 queue ===========
311Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
312EC arm "_Q14" N:4 Cur:4
313======= Execute EC 4 queue ===========
314Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
315EC arm "_Q14" N:5 Cur:5
316======= Execute EC 5 queue ===========
317Check - IRQ AcpiWaitOBF Ctl=9 OBF=0
318EC arm "_Q14" N:6 Cur:6
319======= Execute EC 6 queue ===========
320Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
321EC arm "_Q14" N:7 Cur:7
322======= Execute EC 7 queue ===========
323Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
324EC arm "_Q14" N:8 Cur:8
325======= Execute EC 8 queue ===========
326Check - IRQ AcpiWaitOBF Ctl=9 OBF=0
327EC arm "_Q14" N:9 Cur:9
328======= Execute EC 9 queue ===========
329Check - IRQ AcpiWaitOBF Ctl=9 OBF=0
330EC arm "_Q14" N:A Cur:A
331======= Execute EC 10 queue ===========
332Check - IRQ AcpiWaitOBF Ctl=29 OBF=0
333EC arm "_Q75" N:B Cur:B
334======= Execute EC 11 queue ===========
335AcpiOsSleep 1 ms
336Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
337EC arm "_Q75" N:C Cur:C
338======= Execute EC 12 queue ===========
339AcpiOsSleep 1 ms
340AcpiOsSleep 1 ms
341Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
342EC arm "_Q75" N:D Cur:D
343======= Execute EC 13 queue ===========
344AcpiOsSleep 1 ms
345AcpiOsSleep 1 ms
346Check - IRQ AcpiWaitOBF Ctl=9 OBF=1
347EC arm "_Q75" N:E Cur:E
348======= Execute EC 14 queue ===========
349AcpiOsSleep 1 ms
350Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
351EC arm "_Q75" N:F Cur:F
352======= Execute EC 15 queue ===========
353AcpiOsSleep 1 ms
354Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
355EC arm "_Q75" N:10 Cur:10
356======= Execute EC 16 queue ===========
357AcpiOsSleep 1 ms
358Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
359EC arm "_Q75" N:11 Cur:11
360======= Execute EC 17 queue ===========
361AcpiOsSleep 1 ms
362AcpiOsSleep 1 ms
363Check - IRQ AcpiWaitOBF Ctl=29 OBF=1
364EC arm "_Q75" N:12 Cur:12
365======= Execute EC 18 queue ===========