Ticket #373: acpi.log

KEE Version 0x10000
@#netlabs dot org:3.12#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Nov 11 2008 21:13:42
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
AcpiOsCreateLock F9C17130
AcpiOsCreateLock F9C1CAF4
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsPredefinedOverride: "_OSI"
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xFACF0/0x24 (v2 ACPIAM)
ACPI: XSDT @ 0x7F790100/0x54 (v1 _ASUS_ Notebook 0x8000722 MSFT 0x97)
ACPI: FACP @ 0x7F790290/0xF4 (v3 _ASUS_ Notebook 0x8000722 MSFT 0x97)
ACPI: DSDT @ 0x7F790590/0x54DA (v1 _ASUS_ Notebook 0x1 INTL 0x20060113)
ACPI: FACS @ 0x7F79E000/0x40
ACPI: APIC @ 0x7F790390/0x80 (v1 _ASUS_ Notebook 0x8000722 MSFT 0x97)
ACPI: SLIC @ 0x7F790410/0x176 (v1 _ASUS_ Notebook 0x8000722 MSFT 0x97)
ACPI: OEMB @ 0x7F79E040/0x6B (v1 _ASUS_ Notebook 0x8000722 MSFT 0x97)
ACPI: HPET @ 0x7F795A70/0x38 (v1 _ASUS_ OEMHPET  0x8000722 MSFT 0x97)
ACPI: MCFG @ 0x7F795AB0/0x3C (v1 _ASUS_ Notebook 0x8000722 MSFT 0x97)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFE82590 New:FFCFFFBC SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 2h LocalApicID 81h - not usable
APIC_PROCESSOR: ProcID 3h LocalApicID 82h - not usable
APIC_PROCESSOR: ProcID 4h LocalApicID 83h - not usable
APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
Table [SLIC]
Table [OEMB]
Table [HPET]
Table [MCFG]
Size of FACDT 244
Type of computer - Desktop
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0xB2
The value to write to SMI_CMD to disable SMI   0xE1
The value to write to SMI_CMD to re-enable SMI 0x1E
The value to write to SMI_CMD to enter the S4BIOS state 0x0
The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xE2
System port address of the PM1a Event Register Block 800
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 804
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 820
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 808
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 828
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 0: 0
GPE status register: 0: 0: 3: CD
The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xE3
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The bit width of the processor's duty cycle setting value in the P_CNT register 3
The RTC CMOS RAM index to the day-of-month alarm value 13
IA-PC Boot Architecture Flags 0x3
Fixed feature flags A5
The reset register:
Type of address space - System I/O
Register Bit Width  8
Register Bit Offset 0
Access size 0
Address 3321
The value to write to the RESET_REG port to reset the system 6
***** Throttl Width 3 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F96F2E29
** AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PAR9],) Bus:0 Dev:31 Fun:1 - Derive: Bus:0 Dev:31 Fun:1
AcpiOsDerivePCIID([PCI0] ,[SAR9],) Bus:0 Dev:31 Fun:2 - Derive: Bus:0 Dev:31 Fun:2
AcpiOsDerivePCIID([PCI0] ,[PIX0],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
** Scan EC Status = 0
** AcpiInitializeObjects mask:0 Status = 0
Processor [CPU1]
Processor [CPU2]
Processor [CPU3]
Processor [CPU4]
Status 0x0 0
ReadFile(krnl): Error read file ACPI.CFG
PSDFree: at 0xF9C00000 success!
Finding:0 bridges
0:0.0  Class:600  Hdr:0   Bridge H->0
0:2.0  Class:300  Hdr:0
0:27.0  Class:403  Hdr:0
0:29.0  Class:C03  Hdr:80
0:29.1  Class:C03  Hdr:0
0:29.2  Class:C03  Hdr:0
0:29.3  Class:C03  Hdr:0
0:29.7  Class:C03  Hdr:0
0:30.0  Class:604  Hdr:1   Bridge 0->1
0:31.0  Class:601  Hdr:80
0:31.1  Class:101  Hdr:0
0:31.2  Class:101  Hdr:0
0:31.3  Class:C05  Hdr:0
1:9.0  Class:200  Hdr:0
PCI Bus scan: 2 PCI buses found.
Scan ACPI tree for PCI functions
0:0.0  'PCI0' (F96C2AC0)
0:1.0  'P0P1' (F96C3018)
0:30.0  'P0P3' (F96C3128)
0:28.0  'P0P4' (F96C3238)
0:28.1  'P0P5' (F96C32E8)
0:28.2  'P0P6' (F96C3398)
0:28.3  'P0P7' (F96C3448)
0:28.4  'P0P8' (F96C34F8)
0:28.5  'P0P9' (F96C35A8)
0:31.0  'SBRG' (F96C3658)
0:30.3  'MC97' (F96C7298)
0:31.2  'IDE1' (F96C7348)
0:29.0  'USB1' (F96C7398)
0:29.1  'USB2' (F96C7448)
0:29.2  'USB3' (F96C74F8)
0:29.3  'USB4' (F96C75A8)
0:29.7  'EUSB' (F96C7658)
0:31.1  'IDE0' (F96C7708)
0:27.0  'AZA_' (F96C86B8)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F96C2AC0) _PRT
0:30.0  class:604  type: 1  Bus 0->1  ACPI: 'P0P3' (F96C3128) _PRT
IRQLinks found:
0: 'LNKA' (F96C8D30)  P[ 3, 4, 5, 6, 7, 10, 11, 12,*14, 15] <- 1:9.0 0:2.0
                       A[]
1: 'LNKB' (F96C8FC0)  P[ 3, 4, 5, 6, 7, 10, 11, 12, 14,*15] <- 0:31.3 0:31.2 0:29.1
                       A[]
2: 'LNKC' (F96C9218)  P[ 3, 4,*5, 6, 7, 10, 11, 12, 14, 15] <- 0:31.1 0:29.2
                       A[]
3: 'LNKD' (F96C9470)  P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:29.3 0:27.0
                       A[]
4: 'LNKE' (F96C96C8)  P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:29.7 0:29.0
                       A[]
PCI devices found:
0:0.0  8086:2770  'PCI0'
0:2.0  8086:2772          IRQs: PCI:0 PIC:'LNKA':14 APIC:16 MSI
0:27.0  8086:27D8  'AZA_'  IRQs: PCI:10 PIC:'LNKD':10 APIC:19 MSI
0:29.0  8086:27C8  'USB1'  IRQs: PCI:11 PIC:'LNKE':11 APIC:20
0:29.1  8086:27C9  'USB2'  IRQs: PCI:15 PIC:'LNKB':15 APIC:17
0:29.2  8086:27CA  'USB3'  IRQs: PCI:5 PIC:'LNKC':5 APIC:18
0:29.3  8086:27CB  'USB4'  IRQs: PCI:10 PIC:'LNKD':10 APIC:19
0:29.7  8086:27CC  'EUSB'  IRQs: PCI:11 PIC:'LNKE':11 APIC:20
0:30.0  8086:244E  'P0P3'
0:31.0  8086:27B8  'SBRG'
0:31.1  8086:27DF  'IDE0'  IRQs: PCI:5 PIC:'LNKC':5 APIC:18
0:31.2  8086:27C0  'IDE1'  IRQs: PCI:15 PIC:'LNKB':15 APIC:17
0:31.3  8086:27DA          IRQs: PCI:0 PIC:'LNKB':15 APIC:17
1:9.0  10EC:8139          IRQs: PCI:14 PIC:'LNKA':14 APIC:16
Bus detected - 1
** AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20081031]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20081031]
** AcpiInstall Sleep Device Status = 22 - AE_NO_HARDWARE_RESPONSE
** AcpiInstall PMTimer Device Status = 0
** Total use:139792 unuse:8432 count:2489 **
Get GpeHdl Status = 0 - AE_OK
Event [_L1B]
Install GPE0x1B  Status 0x0
Event [_L09]
Install GPE0x9  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L1D]
Install GPE0x1D  Status 0x0
Event [_L08]
Install GPE0x8  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L04]
Install GPE0x4  Status 0x0
Event [_L0C]
Install GPE0xC  Status 0x0
Event [_L0E]
Install GPE0xE  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96B3300 in arg F96B3300
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:828 Enable:82C EnableWake:38 EnableRun:0 BaseGPENumber:0
GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:829 Enable:82D EnableWake:7B EnableRun:0 BaseGPENumber:8
GPE2 Status:82A Enable:82E EnableWake:0 EnableRun:0 BaseGPENumber:10
GPE0x1B Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x1D Flag:0x2 Status - Set 0x0 Enable 0x0
GPE3 Status:82B Enable:82F EnableWake:28 EnableRun:0 BaseGPENumber:18
=========== Status 0x0 0
FindPCIDevice
 Need: B:0 D:1F F:1
Finding APIC0 PIC5 Dev: [IDE0]
FindPCIDevice
 Need: B:0 D:1F F:2
Finding APIC0 PIC15 Dev: [IDE1]
Gradd: PSD find success. PSD Ftable:F9C1017C
******** Event tread ***************
AllocateSuspendMemory s_cpu:0
Alloc s_cpu OK CPU0 2304 bytes at 0
AllocSuspend: CPU0 CR3:211000
Status 1Mb alloc 0
AcpiExecSMPFunction: Unicall
AcpiExecSMPFunction: End